Cisco Unified Communications Manager 2

Here you will find answers to Cisco Unified Communications Manager Questions – Part 2

Question 1

In which two locations can an end user configure their Call Forward All settings? (Choose two)

A. Cisco Unified Serviceability
B. Cisco Unified Communications Manager User Options Interface
C. Directly on the Cisco Unified IP phone
D. Cisco Unified Communications Manager Administration
E. Cisco Unified User Serviceability

Answer: B C

Question 2
What is the quickest way to test the Cisco Unified Communications Manager configuration part of MWI to see if MWI On and MWI Off is working?

A. Dial into Cisco Unity Connection from an IP phone. Enter the MWI On numbers,then enter the MWI Off numbers.
B. Call a voice-mail user and ask them if their MWI light is on, and then disconnect the call. Call the user back and ask if the MWI light is off.
C. In Unity Connection, issue the MWI Flash command to turn all MWI lights on, then off.
D. If MWI numbers aredialable from an IP phone, dial the MWI On number. If the light comes on, then dial the MWI Off number to see if the light goes off.
E. MWI cannot be tested directly from the Cisco Unified Communications Manager or an IP phone.

Answer: D

Question 3

To obtain CDR information, which application is used?

A. Cisco Unified Communications Manager Administration
B. Cisco Unified Serviceability
C. Cisco Unified Operating System Administration
D. Disaster Recovery System
E. Cisco Unified Communications Manager Call Detail Record Analysis and Reporting tool
F. Cisco Unified Reporting

Answer: E

Question 4
What component does Cisco Unified Communications Manager Express use to match outbound dial peers?

A. destination pattern
B. incoming called-number
C. calling number ANI
D. answer-address
E. port or session target

Answer: A

Question 5
In Cisco Unified Communications Manager Native Presence, what two things is a watcher monitoring in real time? (Choose two.)

A. registration status of a specific IP phone
B. registration status of the hunt group
C. registration status of the MGCP gateway
D. registration status of Cisco Extension Mobility of the IP phone
E. status of a registered directory number

Answer: A C

Question 6
Which protocol is used for communication between Cisco Unity Express and Cisco Unified Communications Manager Express?

A. H.323
B. G.711
C. MGCP
D. Q.931
E. SIP

Answer: E

Question 7

What is the correct URL to use to add a user to Cisco Unified Communications Manager Express?

A. http://ipaddress/cucme.html
B. https://ipaddress/cue.html
C. httpd://www.ipaddress/cme.html
D. http://ipaddress/ccme.html
E. http://ipaddress/cme.html

Answer: D

Question 8
What is the Cisco Unified Communications Manager implementation of one-way intercom referred to as?

A. One-Way Intercom monitor
B. Whisper Intercom
C. Secure Intercom
D. Silent monitor

Answer: B

Question 9
Which configuration must be configured on the Cisco Unified Communications Manager Express
router prior to Graphical Administration?

A.
ip http server

telephony-service
web admin system name admin password cisco
dn-webedit
time-webedit

B.
ip http server
ip http path flash:path

telephony-service
web admin system name admin password cisco
dn-webedit
time-webedit

C.
ip https server
ip https path flash:path

telephony-service
web admin system name admin password cisco
dn-webedit
time-webedit

D.

ip http server
ip http path flash:path

telephony-service
dn-webedit
time-webedit

A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D

Answer: B