I don’t know if these are valid or not, just wanted to point people in a direction if they want to review their knowledge after studying and see where they stand. Having said that, would appreciate feedback on what is valid or not.
Good Luck to us all.
JustHelping
August 28th, 2015
^^^
As an update, please keep the post dates in mind, some of them were probably uploaded a long time ago.
Helmy
August 30th, 2015
Hello everybody. Any news about this exam?
Ek
September 1st, 2015
203q still valid passed today..
kerca
September 2nd, 2015
Hi people, here is the PDF from actualtest 203q, please share your experience.
btw, anyone have experienced the 300-075 exam, any idea about study resource and exam preparation please ?
Tomique34
September 4th, 2015
203q 100% valid – exam passed 10 min ago -> 1000 of 1000 🙂 But its suitable to read student books as well 😉
zabalaza
September 4th, 2015
@ken
Thanks man .it is very nice of you – the link is full of material for all IT stuff .
I looked everywhere to try and find anything on the new exam 300-075 ,but there is nothing – even the exam objectives are hard to find on this collaboration .
Really wanted to help but no way to .
LEILM
September 7th, 2015
Can someone please share the VCE file 203q , please send it to lilly_eh@hotmail.com .
why not ‘B’ port name misconfigured?
the ports are created in cuc and then we use the port wizard to create the ports in cucm… so we name the cucm port to whatever cuc is configured as.. surely B would be correct if cuc has to be configured first and cucm takes the name from cuc.
anyone else have another reason for choosing C?
zabalaza
September 8th, 2015
The 203 0r 213 questions dump is still valid . passed today – but guys study well before you seek dumps .
In my case i just don’t want to repeat this cisco exams because they are quite expensive and high marks to pass ,to take chances when you can get a cover somehow .
Good luck to all.
zabalaza
September 8th, 2015
@rahul
don’t be lazy . the pdf is in the link given above. just go there and get it .
Rahul
September 8th, 2015
@zabalaza, not lazy !! 250$ is big amount and i don’t to wasteit. pls help , pls send on my e-mail id so i can verify … since you are experienced person.
M@ne
September 9th, 2015
Hello Mossey.
Relate to your post from September 7th, the correct answer is C (The Device Name Prefix field is misconfigured)
Why not B? -> The reason is, when are integrating CUCM and CUC, on step Cisco Voice mail Port Wizard, you will define the how many ports, name and etc. After finishing this step, you will see the Voice mail port created. The name must match the same name that you are going to put on CUC -> Telephony Integration -> Phone System(Device Name Prefix)
I hope I have helped you.
ken
September 10th, 2015
hi guys,
not relevant but truly appreciate if someone can share any news about 300-075 exam, sounds like study materials for video part of it are nowhere to find and no clue to search …. dam, I dont want to take CVOICE and CIPT2 to get the retiring CCNP Voice ….
M@ne
September 10th, 2015
Hi Ken.
Why don’t you take CVOICE and CIPT2 exams for CCNP Voice and then just do one exam for CCNP collaboration and have two certifications?
I am telling you that, because I could not find any study materials for the new certification.
Cheking on cisco website -> CCNP Collaboration Exam Migration Tool, if do the following exams:
You will only need to do CIPTV2 to be CCNP Collaboration certified.
Think about it.
mossey
September 10th, 2015
hi m@ne
i just actually read the following on the capps study guide yesterday:
‘When integrating CUC and CUCM, you configure the initial integration in CUCM by using the Voice Mail Port Wizard, then you configure the VM integration on the Unity Connection server, and finally, you test the integration.’ …..so looks like cucm first then cuc.
but i have configured my cuc and cucm before reading this the other way around and it worked fine! i mean of course the names must match but from that question my query was that either side could be named wrong depending on which side was created first!
i guess cisco want you to do cucm side first for this answer but as i say, i created cuc first and had no issue integrating both but thanks for your help anyway
Ivan
September 15th, 2015
PDF version of actual tests v38 is good, 905/1000 today
Mandela
September 15th, 2015
Please do not confuse yourself, cos all you need now to Qualifies for CCNP Collaboration is:
I already take my exam 300-080 using vce premium file and failed!!
Dump is not valid. Just only 10 Questions same with the dump and 50Questions more are New
Passing Score : 860 with 60 Question. Is there anyone have valid dump for 300-085? Coz i’ll take the exam Next week
#CCNPCollaboration
mossey
September 16th, 2015
@ aisyah
you can take capps 642-467 up until 20th october and it will migrate as capps 300-085.
check kens link for valid capps 642-467 paper so you will not need take 300-085 unless your planning to take it after 20th october
mossey
September 16th, 2015
sorry also tvoice 642-427 will convert to ctcollb on same dates so use kens media fire link for these two exams if you intend to take before 20th october
Len La
September 21st, 2015
Wrote 642-467 exam on 19/Sep/2015, and passed with 954/1000 points!
Lots of new questions, I learned the newest 642-467 dumps and got almost all new questions, very useful!
Anyone who need that new 642-467 dumps, please write your e-mail here, and I will send file ASAP!
Good luck for all!
Best Regards!
T-Bone
September 21st, 2015
Len La, please upload file in drop box so we can get it from there… will it be possible? It will save you the hassle in sending the file to us one by one.
I passed on 9/22/15 with a 943. I used the new Actual Tests 203 questions dump is valid.
CoLe
September 26th, 2015
Hey guys …the current comments sound good.
One little hint:
If the Cisco Unity Express administrator sets the lockout policy to Temporary, with a temporary lockout duration of 5 minutes and a maximum number of failed attempts of 3, what must the end user do if they have exhausted their maximum number of failed attempts?
Dump says: The end user must contact the Cisco Unity Express administrator to have the default user password reset.
But it cannot correct. The following should be the right answer: The end user must wait for the temporary timeout to expire before attempting to login again.
@Castañon: useless, duplicated questions which are in the actualtests dumps.
Aisyah
October 1st, 2015
@ken : bro, could u please tell me ur email. i want to discussing more about CCNP Collaboration
f-man
October 1st, 2015
@cole
the question states MAX number of failed attempts reached eg24. (not just 3 failed) in which case the admin must reset!! it is a sneakey question that needs read carefully! when you lock out your account 8 times (3×8=24) the password must be reset by admin.
CoLe
October 2nd, 2015
@f-man: Ok, now I know where I lost my points. 😀
Who cares: passed …dump is valid.
I’ve edit the actualtests dump a little bit, there are only 198 questions.
Abid Hussain
October 2nd, 2015
actual test 203 q valid or not .. my test is on tuesday..
Tommy
October 3rd, 2015
can some please advise which is the latest 203Q or 198Q dump with the full name and where it can be downloaded from? I dont wanna loose all my hard earned money by failing. I really appreciate ur help. Already failed on my first attempt. 🙁
Abid Hussain
October 3rd, 2015
which dump you used before..
Tommy
October 4th, 2015
Cisco.642-467.v2014-02-04.by.Elie.174q
Aisyah
October 9th, 2015
Hi Mossey..
thanks for ur advice, i did my exam 642-427 and Pass(929)!! i’m using 301Q from vce premium examcollection
*300-070 *300-075 *642-427 Done, i’m waiting for my next exam 300-085 …
Thanks guys
abid hussain
October 10th, 2015
Passed with 9xx… oct 8 , 2015
Good luck to all
abid hussain
October 10th, 2015
Exam was 642-467
JGREjG
October 12th, 2015
abid.. did you use the 203Q for 642-467?
Helmy
October 12th, 2015
Hello,
Is the dump Cisco.Selftestengine.642-467.v2014-02-04.by.Elie.174q still valid?
this exam will end sooner by 20th October
@ Nina, have you taken these new collab exams already? are the valid dumps. Kindly advise. Thank you for sharing. I was planning to do the 642-467 next week. Been studying for it 4 months now.
@Tommy – I have written all the collab exams and the dumps listed in my share are more than
valid.
Tommy
October 16th, 2015
@Nina – Thank you for the confirmation.
tomsek
October 16th, 2015
All the questions are taken directly from student book.
Leo
October 18th, 2015
please share the latest valid 642-467 dump. Thanks.
tomsek
October 19th, 2015
Post your email address
tomsek
October 19th, 2015
@Leo,
Post your email address. And to understand answers, just download Student book for CAPPS. For each question, you can find the answer there.
M@ne
October 19th, 2015
Hello!
I have just passed on the 642-657 exam.
The 203 question Dump are still valid.
Hurry up!
Thank everyone for the support.
tommy
October 19th, 2015
@ M@ne, do u mean 642-467 CAPPS v8.0 exams. ?
M@ne
October 19th, 2015
Tommy,
Sorry.
642-467…
tommy
October 19th, 2015
@M@ne, no problem mistakes happen. 2 more days on this one. Goodluck to all.
Helmy
October 20th, 2015
Passed today. 203Q is valid
will continue the collaboration.
Helmy
October 20th, 2015
Any new thread about collaboration? any update for this will be great. Thanks guys for your efforts 🙂
Helmy
October 20th, 2015
Hello Nina,
Please share again. the link is not valid any more.
tomsek
October 22nd, 2015
Could someone tell if when I have valid CCNA VOICE, and passed 3/5 CCNP VOICE exams, do I need to CIVND first to obtain CCNA COLLAB, and then go to remaining CCNP COLLAB exams. Or can I skip this part?
has anyone taken this exam yet or any valid tips on test?
chris
November 18th, 2015
does anyone have a valid source for a dump yet? What about the links from Kochanski on this page?
Anonymous
November 23rd, 2015
peeps you should download latest dumps from this link
” tiny. cc/9tut “
Ken LEE
November 30th, 2015
New 300-070 Exam Questions and Answers Updated Recently:
NEW QUESTION 72
What are the two benefits of using SIP dial rules on an IP phone? (Choose two)
A. The phone can initiate dialing without sending any signaling messages to Cisco Unified CommunicationsManager.
B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages toCisco Unified Communications Manager.
C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message toCisco Unified Communications Manager.
D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remainingdigits from the SIP phone to Cisco Unified Communications Manager one-by-one.
E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to sendthe remaining digits from the SIP.
Answer: BD
NEW QUESTION 73
Which three Cisco Unified CallManager configuration steps are required to support third party SIP phones? (Choose three.)
A. Configure the device in Cisco Unified CallManager.
B. Change the proxy address in the SIP phone to an IP address or the Fully Qualified Domain Name (FQDN)of Cisco Unified CallManager.
C. Associate the device with the end user.
D. Configure the phone with the TLS username and password.
E. Configure the end user in Cisco Unified CallManager.
F. Add the MAC address of the Cisco Unified CallManager server to the SIP phone configuration page.
Answer: ACE
NEW QUESTION 74
Which four software based media resources require that the Cisco IP voice media stream Application be activated?
A. MOH.
B. SIP.
C. H.323 Gateways.
D. Annunciator.
E. Gatekeeper.
F. MTP.
G. Audio conferencing.
Answer: ADFG
NEW QUESTION 75
Which protocol is recommended to be used between Cisco Unified Communications Manager and the voice gateway to simplify the dial plan?
A. SIP.
B. SCCP.
C. H323.
D. RSVP.
E. MGCP.
Answer: E
NEW QUESTION 76
Which protocol can Cisco Unified Communications Manager not use to monitor the status of the gateway?
A. H.323
B. SIP
C. MGCP
D. SCCP
Answer: A
NEW QUESTION 77
In a centralized call-processing solution, there are five sites connected through an IP WAN. To optimize the utilization of the IP WAN, CAC needs to be implemented. How should CAC be implemented?
A. Use a gatekeeper to control allocated bandwidth properly.
B. Use locations CAC with a single location.
C. Use a gatekeeper and Cisco Unified Border Element to provide CAC to sites that use a combination of SIPand MGCP gateways.
D. Use a gatekeeper to only control those locations that use H.323 gateways and a Cisco Unified BorderElement to control those sites that use MGCP or SIP gateways.
E. Use locations CAC with five locations in addition to Hub none.
Answer: E
NEW QUESTION 78
Which two features are advantages of deploying a cluster over WAN? (Choose two.)
A. Shared line appearances
B. CentralizedDSP resources
C. Extension mobility within the cluster
D. Scalability up to 20 sites, if thereis sufficient IP WAN bandwidth
E. Failover to co-resident Cisco UnifiedCall Manager Express platforms
Answer: AC
NEW QUESTION 79
The Ajax Corporation is designing an IP telephony network using Cisco MCS 7845 Series servers, each one capable of supporting 7500 devices. The design must meet these requirements:
– Be cost-effective
– Support up to 7500 phones
– Provide a minimal level of redundancy
Which configuration will meet Ajax Corporation needs?
A. Two Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
B. Three Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
1 backup subscriber.
C. Four Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
1 backup subscriber.
D. Five Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
2 backup subscribers.
Answer: B
NEW QUESTION 80
How are Cisco Unified CallManager location parameters used?
A. Assign directory numbers to devices as they connect to the IP telephony network.
B. Specify the bandwidth used for audio and video calls.
C. Implement call admission control in a centralized call processing deployment.
D. Provide alternate call routing when the primary call path is unavailable.
Answer: C
NEW QUESTION 81
Which statement regarding Cisco IP voice media streaming application is correct?
A. It should be activated on the gateway in cluster that supports the TFTP service.
B. It should be activated on the gatekeeper in cluster that supports the TFTP service.
C. It should be activated on the node in cluster that does not support the TFTP service.
D. It should be activated on the node in cluster that supports the TFTP service.
Answer: D
NEW QUESTION 82
Which option describes how you add software conference bridges to Cisco Unified Communications Manager?
A. By adding a Cisco Unified CM server to the cluster.
B. By adding a software conference bridge using Conference Bridge Configuration.
C. By installing DSP to a Cisco Unified CM server.
D. By reassigning other media resources to conference resources.
Answer: A
NEW QUESTION 83
Which of these media resources can be configured in Cisco Unified Communication manager? (Choose Three)
A. MOH Server
B. Voice Termination Point DSP
C. Transcoder
D. Auto Attendant
E. Conference Bridge
Answer: ACE
NEW QUESTION 84
What is the relationship between a Region and a Location?
A. The Region codec parameter is used between a Region and its configured Locations.
B. The Region setting for a Location sets the number of audio and video calls that Location can support.
C. The codec parameter configured in the Region is only used between Regions and Location bandwidth isonly used between Locations.
D. The Region codec parameter is combined with Location bandwidth when communicating with otherRegions.
Answer: C
NEW QUESTION 85
……
BTW, These New 300-070 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-070 Dumps In PDF And VCE From — http://www.passleader.com/300-070.html
Good Luck !!!
Ken LEE
November 30th, 2015
New 300-085 Exam Questions and Answers Updated Recently:
NEW QUESTION 61
Which CCC action applies only to the Cisco TelePresence MPS Series?
A. block fast update requests
B. Status Duo Video
C. move back
D. release floor
Answer: A
NEW QUESTION 62
Which protocol is prioritized by Cisco TMS for conferencing?
A. SIP
B. MGCP
C. H.323
D. SCCP
Answer: C
NEW QUESTION 63
How does Cisco TMS set up a call with an endpoint that is registered with Cisco Unified Communications Manager and that is connected to Cisco VCS?
A. Cisco TMS uses an IP dialing plan.
B. Cisco TMS uses a SIP trunk.
C. Cisco TMS removes the top-level domain from calls that go through Cisco Unified Communications Manager.
D. Cisco TMS drops the call, because it can verify that the trunk between Cisco Unified Communications Manager and Cisco VCS is down.
Answer: B
NEW QUESTION 64
On Cisco TelePresence Management Suite, which two call control devices are supported for call control and setup? (Choose two.)
A. Cisco Unified Communications Manager Express
B. Cisco TelePresence Video Communication Server
C. Cisco Unified Border Element
D. Cisco Unified Communications Manager
E. any SIP-capable call control system
Answer: BD
NEW QUESTION 65
Which three are valid system connectivity statuses for systems that are automatically added to Cisco TelePresence Management Suite? (Choose three.)
A. Inaccessible
B. Failed
C. Connected
D. Reachable on Public Internet
E. Behind Firewall
F. Online
G. Remote Site
Answer: ADE
NEW QUESTION 66
To have a Provisioning menu section available on Cisco TelePresence Management Suite, what must you do?
A. You must configure an active ISDN zone.
B. You must install Cisco TelePresence Management Suite Provisioning Extension and activate it on the system.
C. You must license Cisco TelePresence Management Suite Analytics Extension.
D. You must set up Cisco TelePresence deployment to support Cisco CMR Hybrid.
Answer: B
NEW QUESTION 67
Which two actions must you take to enable provisioning on Cisco TMS and Cisco VCS? (Choose two.)
A. Apply a Device Provisioning option key on Cisco VCS.
B. Enable provisioning on Cisco VCS under Applications > Provisioning.
C. Configure Users, FindMe, Phonebooks, and Devices individually, as these all have different settings.
D. Configure a separate server to run provisioning extension services.
E. Ensure that a service account is able to connect.
F. Set the polling intervals on Users, FindMe, Phonebooks, and Devices to the same value, in order for the synchronization to work.
Answer: AE
NEW QUESTION 68
What must you do to activate the provisioning feature on a Cisco VCS endpoint?
A. Install the Device Provisioning option key.
B. Set a SIP trunk between Cisco VCS and Cisco Unified Communications Manager.
C. Add the Cisco VCS on the Cisco TMS, and enable Cisco Extension Mobility.
D. Install Cisco VCS Starter Pack Express.
Answer: A
NEW QUESTION 69
Refer to the exhibit. Which statement about the jabber-config.xml partial output is true?
A. 10.255.10.10 is the LDAP server address.
B. The client connects to the directory server by using SSH.
C. 10.255.10.10 is the Cisco Unified Communications Manager IM and Presence Service address.
D. The client connects to the directory server by using HTTPS.
Answer: D
NEW QUESTION 70
The UDS for contact resolution is enabled in the service profile configuration of the Cisco Unified Communications Manager. Which action can you execute with your Jabber Desktop?
A. modify users
B. search users
C. change users
D. delete users
Answer: B
NEW QUESTION 71
Which profile must you add to an end user record, if the end user wants to access voicemail and wants to control a deskphone via CTI with Cisco Jabber?
A. remote destination profile
B. device profile
C. SIP profile
D. service profile
E. phone service
Answer: D
NEW QUESTION 72
……
BTW, These New 300-085 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-085 Dumps In PDF And VCE From — http://www.passleader.com/300-085.html
Good Luck !!!
Ken LEE
November 30th, 2015
New 300-080 Exam Questions and Answers Updated Recently:
NEW QUESTION 76
Phone A is able to dial the directory number of Phone B and complete a call. However, when Phone B dials the directory number of Phone A, Phone B receives a fast-busy tone. What is causing this issue?
A. Phone A and Phone B are in different partitions.
B. Phone B does not have Phone A in its partition.
C. Phone B is not in the CSS of Phone A.
D. Phone B does not have the CSS of Phone A in its partition.
E. Phone B is not registered.
F. Phone B has the incorrect CSS to dial Phone A.
Answer: F
NEW QUESTION 77
An inbound call from the PSTN is not reaching the directory number that it is calling. When the PSTN phone calls the correct DID, only a dial tone is heard. Which command resolves this issue?
A. (config-dial-peer)#direct-inward-dial
B. (config-controller)# no provide-outside-dialtone
C. (config-if)#no dial-tone
D. (config-dial-peer)# no dial-tone
E. (config-if)#direct-inward-dial
F. (config) allow inbound dial-peer 1
Answer: A
NEW QUESTION 78
When a caller dials 9 plus an external seven-digit number, the caller hears a fast-busy tone after a period of silence. What is causing the silence?
A. There is no dial route for 9XXXXXXX on Cisco Unified Communications Manager.
B. The gateway is not dropping the leading 9, and the PSTN fails.
C. The T302 timer is waiting to expire.
D. The caller does not have the PSTN partition in the CSS.
E. The caller dialed the wrong number.
F. To dial successfully, the caller must enter a Forced Authorization Code.
Answer: C
NEW QUESTION 79
In a single-site deployment model, the internal endpoints are unable to dial from one to the other. What are two possible causes? (Choose two.)
A. The PSTN gateway is not configured.
B. The called endpoint does not have the SIP trunk enabled.
C. The called endpoint is not registered.
D. The calling endpoint is not in the CSS of the called endpoint.
E. The called endpoint is not in the partition of the calling endpoint.
F. The calling endpoint is not configured for the correct CoS.
Answer: CF
NEW QUESTION 80
What is the default interval for SAF hello packets?
A. 15 seconds
B. 15 seconds on links with speeds that are slower than T1 speeds
C. 40 seconds
D. 40 seconds onlinks with speeds that are slower than T1 speeds
E. 60 seconds
F. 60 seconds onlinks with speeds that are slower than T1 speeds
Answer: F
NEW QUESTION 81
Which configuration can be dynamically set using the Cisco Unified Communications Manager Device Mobility feature?
A. phone model and protocol
B. SRST reference and directory number
C. CSS and local gateway
D. partition and CSS
E. media resources and permanent bridges
Answer: C
NEW QUESTION 82
Which configuration is required on Cisco TelePresence Server, in order to support 1080p resolution?
A. Screen licenses must be configured.
B. Cisco TelePresence Server must be in remotely managed mode.
C. Cisco TelePresence Server must be in HD mode.
D. Cisco TelePresence Server must be configured with Cisco TelePresence Conductor.
E. Cisco TelePresence Server must be in Full HD mode.
Answer: E
NEW QUESTION 83
A user is dialing an external PSTN number with a prefix of 01 from a Cisco TelePresence SX10 Quick Set in a Cisco VCS environment. In the past, the Cisco VCS and the ISDN gateway were correctly configured with a prefix of 01, but the calls are now failing. What are three possible causes? (Choose three.)
A. The Cisco VCS Control is down.
B. The interworking setting is turned off.
C. The audio feature in the Cisco TelePresenceSX10 is turned off.
D. The SIP trunk is not configured on the gateway.
E. 01 is not a valid prefix.
F. ISDN is not enabled on the Cisco TelePresenceSX10.
G. The Cisco TelePresenceSX10 is not registered to the Cisco VCS Control.
H. The Cisco TelePresenceSX10 is not registered to the Cisco Express C.
Answer: ABG
NEW QUESTION 84
When the command utils dbreplication status is executed on the Cisco Unified Communications Manager CLI, which step should be taken next to check the database replication status?
A. View the activelog file.
B. Run the same command on all nodes of the cluster.
C. Restart the Cisco CallManager service.
D. The command utils dbreplication runtimestate must be run on the publisher.
E. The command utils dbreplication runtimestate must be run on the subscriber.
Answer: A
NEW QUESTION 85
Which tool can you use to see SAF advertisements in Cisco Unified Communications Manager?
A. Cisco Unified Real-Time Monitoring Tool
B. show eigrp neighbors command
C. debug eigrp commands
D. Terminal Monitor
Answer: A
NEW QUESTION 86
URI dialing is enabled between two clusters with the default options. The engineer that set up the URI dialing verified that all was working properly. However, a user from one of the clusters cannot dial using URI to a user in the same cluster. What do you do to resolve this issue?
A. Verify the password that is used by the authentication under Intercluster Lookup Service configuration.
B. Find out if the URI address of the called user has a capital letter in the URI string.
C. Verify that Intercluster Lookup Service is set up correctly.
D. Verify USN Data Synchronization Status.
Answer: B
NEW QUESTION 87
……
And, These New 300-080 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-080 Dumps In PDF And VCE From — http://www.passleader.com/300-080.html
Good Luck !!!
Ace
December 4th, 2015
Hi Guys,
I’m reviewing the questions on the new 300-080 dump (118q). There’s a drag and drop item question no.116 which have wrong answers.
1. One-way audio or video
2. Pixelation, smearing or pulsing
3. Degraded video quality
4. Codec no self-view
5. Echo issues
A. Different system manufacturer
B. Firewall with packet inspection enabled
C. Very high noise level
D. Packet loss
E. Main source is not main camera
On the dump the answer is:
A-2
B-4
C-1
D-5
E-3
The answer should be: (for me, and need your confirmation is this is correct)
A-3
B-1
C-5
D-2
E-4
And here’s my explanation and my opinion:
A. Different system manufacturer = 3. Degraded video quality
– For example a Cisco codec using H264 and other manufacturer using other video compression, during the call the video quality will be affected with mismatch video codecs with poor video quality. This is issue is encountered usually in a multipoint call hosted by Cisco MCU and even in Cisco endpoints.
B. Firewall with packet inspection enabled = One-way audio or video
– Firewall is the culprit for one way audio and video if media ports are not properly defined and opened on the firewall. Also caused by ALG enabled in firewall for deep inspection of SIP and H323 packets.
C. Very high noise level = 5. Echo issues
– Setting the audio gain level too high will add noise and of course very high audio levels will result to echo.
D. Packet loss = Pixelation, smearing or pulsing
– High percentage of Packet loss will affect the quality of video and audio. Pixelation in video and sometimes the audio is chocking when packet loss is experienced.
E. Main source is not main camera = 4. Codec no self-view
– When the Camera is not set as the main source, there will be no self-view so you cannot see your local video (near end).
Fest Held
December 8th, 2015
Luckily Passed My 300-085 Exam Yesterday!!!
New Questions were Cisco TMS, Cisco VCS and so on!
Do Not Worry About The New Questions, They Were Easy To Answer!
There is a question in the dump and something wrong with the answers. Please verify and agree with me if i’m correct:
Which three steps are necessary to configure Cisco VCS and TMS to support provisioning
functionalities? (Choose three.)
A. Activate LDAP synchronization on the VCS server to authenticate the end users.
B. Activate provisioning by installing the Device Provisioning option key on the VCS.
C. Create groups, users, and assign configuration templates and schemas to the groups on the
Cisco TMS.
D. Install FindME licenses on the Cisco TMS.
E. Configure phone book sources.
F. Configure a neighbor zone on VCS pointing to the TSMPE.
G. Configure the authentication policy on VCS for zones and subzones to “Do not Check
Credentials”.
Ans on dump is A,B,D.
A (not correct) – Integration to LDAP/AD is optional and is not mandatory for Provisioning feature between TMS and VCS. You can locally authenticate devices and users on VCS local database.
D (not correct) – FindMe license is activated on VCS and not on TMS!
My answer will be B,C,E.
Luiz Clarke
December 15th, 2015
@Fest Held, YES! YOU ARE RIGHT!
New questions on Cisco TMS, Cisco VCS were appeared in my yesterday’s actual test.
And, thanks for your kindly comment, I also passed exam by using PassLeader’s 300-085 dumps, 100% valid.
P.S. I found some new 300-085 questions have been published on PL’s Facebook home page here: https://tr.im/njyaW
Good Luck For All!
Sy
December 15th, 2015
I cleared the 300-085 exam today with 9xx points! Used the 96q dump and it’s enough to pass the exam.
Hi guys , Can any one Confirm the Actual Test 203 Q is still Valid ? thanks
Hi.
I’m goin to take the test, please somebody who has passed the exam and can recommend study material
Greetings
Im going to test this week, can someone confirm what version is valid?
Ciscaway, may I know how did you open that 203 questions? can you please post the vce link that you use? Thanks
Hi Guys,
Can someone recommend a study material?
My exam is coming soon. Please help!
Thanks.
Ciscawy, can you please share your 203 questions. pleaseeee.
Hi guys
Anybody has written lately ??? please shared ,any clue will help
thanks
http://www.mediafire.com/folder/9bmteb9f67uet/VCE_Files#61zd46jarojrx
I don’t know if these are valid or not, just wanted to point people in a direction if they want to review their knowledge after studying and see where they stand. Having said that, would appreciate feedback on what is valid or not.
Good Luck to us all.
^^^
As an update, please keep the post dates in mind, some of them were probably uploaded a long time ago.
Hello everybody. Any news about this exam?
203q still valid passed today..
Hi people, here is the PDF from actualtest 203q, please share your experience.
https://www.dropbox.com/s/x0aejehof2qscn5/642-467.pdf?dl=0
Can anyone send me the 203 VCE on lilly_eh@hotmail.com
@huri rigari. What is the differnce between the 203 questions and this new 213 questions. ?
Just 10 question more or news questions all together ??
just passed the exam yesterday. 203q is 95% valid ,missing around 5 questions ,passing score 811,
guys, check the folder
http://www.mediafire.com/folder/9bmteb9f67uet#pacu434ad98lp
for some resource you need, many exam file are there
free work, no virus, just want to share for one who need.
btw, anyone have experienced the 300-075 exam, any idea about study resource and exam preparation please ?
203q 100% valid – exam passed 10 min ago -> 1000 of 1000 🙂 But its suitable to read student books as well 😉
@ken
Thanks man .it is very nice of you – the link is full of material for all IT stuff .
I looked everywhere to try and find anything on the new exam 300-075 ,but there is nothing – even the exam objectives are hard to find on this collaboration .
Really wanted to help but no way to .
Can someone please share the VCE file 203q , please send it to lilly_eh@hotmail.com .
guys
check out this question..
http://www.ccieuniversity.com/when-users-press-the-messages-button-on-their-ip-phones-to-check-voice-mail-they-are-hearing-a-busy-signal-what-is-causing-the-issue/
why not ‘B’ port name misconfigured?
the ports are created in cuc and then we use the port wizard to create the ports in cucm… so we name the cucm port to whatever cuc is configured as.. surely B would be correct if cuc has to be configured first and cucm takes the name from cuc.
anyone else have another reason for choosing C?
The 203 0r 213 questions dump is still valid . passed today – but guys study well before you seek dumps .
In my case i just don’t want to repeat this cisco exams because they are quite expensive and high marks to pass ,to take chances when you can get a cover somehow .
Good luck to all.
@rahul
don’t be lazy . the pdf is in the link given above. just go there and get it .
@zabalaza, not lazy !! 250$ is big amount and i don’t to wasteit. pls help , pls send on my e-mail id so i can verify … since you are experienced person.
Hello Mossey.
Relate to your post from September 7th, the correct answer is C (The Device Name Prefix field is misconfigured)
Why not B? -> The reason is, when are integrating CUCM and CUC, on step Cisco Voice mail Port Wizard, you will define the how many ports, name and etc. After finishing this step, you will see the Voice mail port created. The name must match the same name that you are going to put on CUC -> Telephony Integration -> Phone System(Device Name Prefix)
I hope I have helped you.
hi guys,
not relevant but truly appreciate if someone can share any news about 300-075 exam, sounds like study materials for video part of it are nowhere to find and no clue to search …. dam, I dont want to take CVOICE and CIPT2 to get the retiring CCNP Voice ….
Hi Ken.
Why don’t you take CVOICE and CIPT2 exams for CCNP Voice and then just do one exam for CCNP collaboration and have two certifications?
I am telling you that, because I could not find any study materials for the new certification.
Cheking on cisco website -> CCNP Collaboration Exam Migration Tool, if do the following exams:
CVOICE (642-437)
CIPT1 (642-447)
CIPT2 (642-457)
TVOICE (642-427)
CAPPS (642-467)
You will only need to do CIPTV2 to be CCNP Collaboration certified.
Think about it.
hi m@ne
i just actually read the following on the capps study guide yesterday:
‘When integrating CUC and CUCM, you configure the initial integration in CUCM by using the Voice Mail Port Wizard, then you configure the VM integration on the Unity Connection server, and finally, you test the integration.’ …..so looks like cucm first then cuc.
but i have configured my cuc and cucm before reading this the other way around and it worked fine! i mean of course the names must match but from that question my query was that either side could be named wrong depending on which side was created first!
i guess cisco want you to do cucm side first for this answer but as i say, i created cuc first and had no issue integrating both but thanks for your help anyway
PDF version of actual tests v38 is good, 905/1000 today
Please do not confuse yourself, cos all you need now to Qualifies for CCNP Collaboration is:
TVOICE(642-427) + CAPPS(642-467) + CIPT1(642-447) + CIPTV2(300-075) = CCNP Collaboration
OR
CTCOLLAB(300-080) + CAPPS(300-085) + CIPTV1(300-070) + CIPTV2(300-075) = CCNP Collaboration
I already take my exam 300-080 using vce premium file and failed!!
Dump is not valid. Just only 10 Questions same with the dump and 50Questions more are New
Passing Score : 860 with 60 Question. Is there anyone have valid dump for 300-085? Coz i’ll take the exam Next week
#CCNPCollaboration
@ aisyah
you can take capps 642-467 up until 20th october and it will migrate as capps 300-085.
check kens link for valid capps 642-467 paper so you will not need take 300-085 unless your planning to take it after 20th october
sorry also tvoice 642-427 will convert to ctcollb on same dates so use kens media fire link for these two exams if you intend to take before 20th october
Wrote 642-467 exam on 19/Sep/2015, and passed with 954/1000 points!
Lots of new questions, I learned the newest 642-467 dumps and got almost all new questions, very useful!
Anyone who need that new 642-467 dumps, please write your e-mail here, and I will send file ASAP!
Good luck for all!
Best Regards!
Len La, please upload file in drop box so we can get it from there… will it be possible? It will save you the hassle in sending the file to us one by one.
I need dump 642-467 faisal.saoud@hotmail.com
Hello Len la
Please could you send it to me?
e_avelino@hotmail.com
Thank you.
I passed on 9/22/15 with a 943. I used the new Actual Tests 203 questions dump is valid.
Hey guys …the current comments sound good.
One little hint:
If the Cisco Unity Express administrator sets the lockout policy to Temporary, with a temporary lockout duration of 5 minutes and a maximum number of failed attempts of 3, what must the end user do if they have exhausted their maximum number of failed attempts?
Dump says: The end user must contact the Cisco Unity Express administrator to have the default user password reset.
But it cannot correct. The following should be the right answer: The end user must wait for the temporary timeout to expire before attempting to login again.
Just the picture in the question is crappy.
I found parts of 213q 642-467 dumps here:
https://drive.google.com/open?id=0B-ob6L_QjGLpWGtDR1pxZnNrVHc
@Castañon: useless, duplicated questions which are in the actualtests dumps.
@ken : bro, could u please tell me ur email. i want to discussing more about CCNP Collaboration
@cole
the question states MAX number of failed attempts reached eg24. (not just 3 failed) in which case the admin must reset!! it is a sneakey question that needs read carefully! when you lock out your account 8 times (3×8=24) the password must be reset by admin.
@f-man: Ok, now I know where I lost my points. 😀
Who cares: passed …dump is valid.
I’ve edit the actualtests dump a little bit, there are only 198 questions.
actual test 203 q valid or not .. my test is on tuesday..
can some please advise which is the latest 203Q or 198Q dump with the full name and where it can be downloaded from? I dont wanna loose all my hard earned money by failing. I really appreciate ur help. Already failed on my first attempt. 🙁
which dump you used before..
Cisco.642-467.v2014-02-04.by.Elie.174q
Hi Mossey..
thanks for ur advice, i did my exam 642-427 and Pass(929)!! i’m using 301Q from vce premium examcollection
*300-070 *300-075 *642-427 Done, i’m waiting for my next exam 300-085 …
Thanks guys
Passed with 9xx… oct 8 , 2015
Good luck to all
Exam was 642-467
abid.. did you use the 203Q for 642-467?
Hello,
Is the dump Cisco.Selftestengine.642-467.v2014-02-04.by.Elie.174q still valid?
this exam will end sooner by 20th October
Link to latest CCNP Collaboration material.
https://drive.google.com/folderview?id=0B-HUe3LbqOa2X3BuUkk4YXhRaXc&usp=sharing
Thanks always welcome
Hi All,
let’s have a look for Collaboration and Voice
https://drive.google.com/folderview?id=0Byxp7VMfvznDTFJ5WGpyVGFtNlk&usp=sharing
Actual Test 203 Q is still Valid I passed exam with 962 on Oct-09-2015
Nina, you Link is not valid- Folder empty?
@MJ please try again.
300-070 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-070-exam-dumps/
300-075 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-075-exam-dumps/
300-080 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-080-exam-dumps/
300-085 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-085-exam-dumps/
@ Nina, have you taken these new collab exams already? are the valid dumps. Kindly advise. Thank you for sharing. I was planning to do the 642-467 next week. Been studying for it 4 months now.
Passed 642-467 exam this morning by learning passleader 642-467 dumps (http://www.passleader.com/642-467.html) (213 Q&As, Updated: Oct 13, 2015)!!!
And, some new 642-467 exam questions are available here: https://drive.google.com/open?id=0B-ob6L_QjGLpWGtDR1pxZnNrVHc
Good Luck for All!
Hello Saghan!
Could tell us aout the new questions?
Thank You.
@Tommy – I have written all the collab exams and the dumps listed in my share are more than
valid.
@Nina – Thank you for the confirmation.
All the questions are taken directly from student book.
please share the latest valid 642-467 dump. Thanks.
Post your email address
@Leo,
Post your email address. And to understand answers, just download Student book for CAPPS. For each question, you can find the answer there.
Hello!
I have just passed on the 642-657 exam.
The 203 question Dump are still valid.
Hurry up!
Thank everyone for the support.
@ M@ne, do u mean 642-467 CAPPS v8.0 exams. ?
Tommy,
Sorry.
642-467…
@M@ne, no problem mistakes happen. 2 more days on this one. Goodluck to all.
Passed today. 203Q is valid
will continue the collaboration.
Any new thread about collaboration? any update for this will be great. Thanks guys for your efforts 🙂
Hello Nina,
Please share again. the link is not valid any more.
Could someone tell if when I have valid CCNA VOICE, and passed 3/5 CCNP VOICE exams, do I need to CIVND first to obtain CCNA COLLAB, and then go to remaining CCNP COLLAB exams. Or can I skip this part?
Regards
@tomsek pls check Ccnp voice collaboration migration tool on http://www.Cisco.com/certifications
NOTE: 642-447 CIPT1 Last day to test: October 20, 2015
And, I found some useful 300-070/300-075/300-080/300-085 study materials:
300-070 Exam Dumps
http://www.cipt1.com/category/cisco-2/300-070-exam-dumps/
300-075 Exam Dumps
http://www.cipt1.com/category/cisco-2/300-075-exam-dumps/
P.S. These 300-075 exam questions are the newest, it seems that PassLeader just updated the 300-075 exam!
300-080 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-080-exam-dumps/
300-085 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-085-exam-dumps/
Hi guys. Any news for the 300-085 exam??
i will take exam this friday and learn from 300-085 premium one plus 642-467 and tell the result. wish me luck…
Good luck Aisyah! I am waiting your results.
best of luck Aisyah. would like to know the outcome
Hello, Could someone share the latest valid dumps?
300-070
300-075
300-080
Thanks,
osshakhatreh@hotmail.com
60Q from premium examcollection is not valid 🙁
Failed!! Passing score 860 with 60 Questions
Aisyah, were there any questions in the exam from the 642-467 203q file??
Hi @Gregory please check mail, already sent to u
Just only 10-15 Questions are same with 60Q premium…
Anyone pass this exam ??
Hello,
anyone have the valid dump for 300-080 and 300-085..
please send it to me @ ahmad.m.kefaya@hotmail.com
Regards,
has anyone taken this exam yet or any valid tips on test?
does anyone have a valid source for a dump yet? What about the links from Kochanski on this page?
peeps you should download latest dumps from this link
” tiny. cc/9tut “
New 300-070 Exam Questions and Answers Updated Recently:
NEW QUESTION 72
What are the two benefits of using SIP dial rules on an IP phone? (Choose two)
A. The phone can initiate dialing without sending any signaling messages to Cisco Unified CommunicationsManager.
B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages toCisco Unified Communications Manager.
C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message toCisco Unified Communications Manager.
D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remainingdigits from the SIP phone to Cisco Unified Communications Manager one-by-one.
E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to sendthe remaining digits from the SIP.
Answer: BD
NEW QUESTION 73
Which three Cisco Unified CallManager configuration steps are required to support third party SIP phones? (Choose three.)
A. Configure the device in Cisco Unified CallManager.
B. Change the proxy address in the SIP phone to an IP address or the Fully Qualified Domain Name (FQDN)of Cisco Unified CallManager.
C. Associate the device with the end user.
D. Configure the phone with the TLS username and password.
E. Configure the end user in Cisco Unified CallManager.
F. Add the MAC address of the Cisco Unified CallManager server to the SIP phone configuration page.
Answer: ACE
NEW QUESTION 74
Which four software based media resources require that the Cisco IP voice media stream Application be activated?
A. MOH.
B. SIP.
C. H.323 Gateways.
D. Annunciator.
E. Gatekeeper.
F. MTP.
G. Audio conferencing.
Answer: ADFG
NEW QUESTION 75
Which protocol is recommended to be used between Cisco Unified Communications Manager and the voice gateway to simplify the dial plan?
A. SIP.
B. SCCP.
C. H323.
D. RSVP.
E. MGCP.
Answer: E
NEW QUESTION 76
Which protocol can Cisco Unified Communications Manager not use to monitor the status of the gateway?
A. H.323
B. SIP
C. MGCP
D. SCCP
Answer: A
NEW QUESTION 77
In a centralized call-processing solution, there are five sites connected through an IP WAN. To optimize the utilization of the IP WAN, CAC needs to be implemented. How should CAC be implemented?
A. Use a gatekeeper to control allocated bandwidth properly.
B. Use locations CAC with a single location.
C. Use a gatekeeper and Cisco Unified Border Element to provide CAC to sites that use a combination of SIPand MGCP gateways.
D. Use a gatekeeper to only control those locations that use H.323 gateways and a Cisco Unified BorderElement to control those sites that use MGCP or SIP gateways.
E. Use locations CAC with five locations in addition to Hub none.
Answer: E
NEW QUESTION 78
Which two features are advantages of deploying a cluster over WAN? (Choose two.)
A. Shared line appearances
B. CentralizedDSP resources
C. Extension mobility within the cluster
D. Scalability up to 20 sites, if thereis sufficient IP WAN bandwidth
E. Failover to co-resident Cisco UnifiedCall Manager Express platforms
Answer: AC
NEW QUESTION 79
The Ajax Corporation is designing an IP telephony network using Cisco MCS 7845 Series servers, each one capable of supporting 7500 devices. The design must meet these requirements:
– Be cost-effective
– Support up to 7500 phones
– Provide a minimal level of redundancy
Which configuration will meet Ajax Corporation needs?
A. Two Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
B. Three Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
1 backup subscriber.
C. Four Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
1 backup subscriber.
D. Five Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
2 backup subscribers.
Answer: B
NEW QUESTION 80
How are Cisco Unified CallManager location parameters used?
A. Assign directory numbers to devices as they connect to the IP telephony network.
B. Specify the bandwidth used for audio and video calls.
C. Implement call admission control in a centralized call processing deployment.
D. Provide alternate call routing when the primary call path is unavailable.
Answer: C
NEW QUESTION 81
Which statement regarding Cisco IP voice media streaming application is correct?
A. It should be activated on the gateway in cluster that supports the TFTP service.
B. It should be activated on the gatekeeper in cluster that supports the TFTP service.
C. It should be activated on the node in cluster that does not support the TFTP service.
D. It should be activated on the node in cluster that supports the TFTP service.
Answer: D
NEW QUESTION 82
Which option describes how you add software conference bridges to Cisco Unified Communications Manager?
A. By adding a Cisco Unified CM server to the cluster.
B. By adding a software conference bridge using Conference Bridge Configuration.
C. By installing DSP to a Cisco Unified CM server.
D. By reassigning other media resources to conference resources.
Answer: A
NEW QUESTION 83
Which of these media resources can be configured in Cisco Unified Communication manager? (Choose Three)
A. MOH Server
B. Voice Termination Point DSP
C. Transcoder
D. Auto Attendant
E. Conference Bridge
Answer: ACE
NEW QUESTION 84
What is the relationship between a Region and a Location?
A. The Region codec parameter is used between a Region and its configured Locations.
B. The Region setting for a Location sets the number of audio and video calls that Location can support.
C. The codec parameter configured in the Region is only used between Regions and Location bandwidth isonly used between Locations.
D. The Region codec parameter is combined with Location bandwidth when communicating with otherRegions.
Answer: C
NEW QUESTION 85
……
BTW, These New 300-070 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-070 Dumps In PDF And VCE From — http://www.passleader.com/300-070.html
Good Luck !!!
New 300-085 Exam Questions and Answers Updated Recently:
NEW QUESTION 61
Which CCC action applies only to the Cisco TelePresence MPS Series?
A. block fast update requests
B. Status Duo Video
C. move back
D. release floor
Answer: A
NEW QUESTION 62
Which protocol is prioritized by Cisco TMS for conferencing?
A. SIP
B. MGCP
C. H.323
D. SCCP
Answer: C
NEW QUESTION 63
How does Cisco TMS set up a call with an endpoint that is registered with Cisco Unified Communications Manager and that is connected to Cisco VCS?
A. Cisco TMS uses an IP dialing plan.
B. Cisco TMS uses a SIP trunk.
C. Cisco TMS removes the top-level domain from calls that go through Cisco Unified Communications Manager.
D. Cisco TMS drops the call, because it can verify that the trunk between Cisco Unified Communications Manager and Cisco VCS is down.
Answer: B
NEW QUESTION 64
On Cisco TelePresence Management Suite, which two call control devices are supported for call control and setup? (Choose two.)
A. Cisco Unified Communications Manager Express
B. Cisco TelePresence Video Communication Server
C. Cisco Unified Border Element
D. Cisco Unified Communications Manager
E. any SIP-capable call control system
Answer: BD
NEW QUESTION 65
Which three are valid system connectivity statuses for systems that are automatically added to Cisco TelePresence Management Suite? (Choose three.)
A. Inaccessible
B. Failed
C. Connected
D. Reachable on Public Internet
E. Behind Firewall
F. Online
G. Remote Site
Answer: ADE
NEW QUESTION 66
To have a Provisioning menu section available on Cisco TelePresence Management Suite, what must you do?
A. You must configure an active ISDN zone.
B. You must install Cisco TelePresence Management Suite Provisioning Extension and activate it on the system.
C. You must license Cisco TelePresence Management Suite Analytics Extension.
D. You must set up Cisco TelePresence deployment to support Cisco CMR Hybrid.
Answer: B
NEW QUESTION 67
Which two actions must you take to enable provisioning on Cisco TMS and Cisco VCS? (Choose two.)
A. Apply a Device Provisioning option key on Cisco VCS.
B. Enable provisioning on Cisco VCS under Applications > Provisioning.
C. Configure Users, FindMe, Phonebooks, and Devices individually, as these all have different settings.
D. Configure a separate server to run provisioning extension services.
E. Ensure that a service account is able to connect.
F. Set the polling intervals on Users, FindMe, Phonebooks, and Devices to the same value, in order for the synchronization to work.
Answer: AE
NEW QUESTION 68
What must you do to activate the provisioning feature on a Cisco VCS endpoint?
A. Install the Device Provisioning option key.
B. Set a SIP trunk between Cisco VCS and Cisco Unified Communications Manager.
C. Add the Cisco VCS on the Cisco TMS, and enable Cisco Extension Mobility.
D. Install Cisco VCS Starter Pack Express.
Answer: A
NEW QUESTION 69
Refer to the exhibit. Which statement about the jabber-config.xml partial output is true?
A. 10.255.10.10 is the LDAP server address.
B. The client connects to the directory server by using SSH.
C. 10.255.10.10 is the Cisco Unified Communications Manager IM and Presence Service address.
D. The client connects to the directory server by using HTTPS.
Answer: D
NEW QUESTION 70
The UDS for contact resolution is enabled in the service profile configuration of the Cisco Unified Communications Manager. Which action can you execute with your Jabber Desktop?
A. modify users
B. search users
C. change users
D. delete users
Answer: B
NEW QUESTION 71
Which profile must you add to an end user record, if the end user wants to access voicemail and wants to control a deskphone via CTI with Cisco Jabber?
A. remote destination profile
B. device profile
C. SIP profile
D. service profile
E. phone service
Answer: D
NEW QUESTION 72
……
BTW, These New 300-085 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-085 Dumps In PDF And VCE From — http://www.passleader.com/300-085.html
Good Luck !!!
New 300-080 Exam Questions and Answers Updated Recently:
NEW QUESTION 76
Phone A is able to dial the directory number of Phone B and complete a call. However, when Phone B dials the directory number of Phone A, Phone B receives a fast-busy tone. What is causing this issue?
A. Phone A and Phone B are in different partitions.
B. Phone B does not have Phone A in its partition.
C. Phone B is not in the CSS of Phone A.
D. Phone B does not have the CSS of Phone A in its partition.
E. Phone B is not registered.
F. Phone B has the incorrect CSS to dial Phone A.
Answer: F
NEW QUESTION 77
An inbound call from the PSTN is not reaching the directory number that it is calling. When the PSTN phone calls the correct DID, only a dial tone is heard. Which command resolves this issue?
A. (config-dial-peer)#direct-inward-dial
B. (config-controller)# no provide-outside-dialtone
C. (config-if)#no dial-tone
D. (config-dial-peer)# no dial-tone
E. (config-if)#direct-inward-dial
F. (config) allow inbound dial-peer 1
Answer: A
NEW QUESTION 78
When a caller dials 9 plus an external seven-digit number, the caller hears a fast-busy tone after a period of silence. What is causing the silence?
A. There is no dial route for 9XXXXXXX on Cisco Unified Communications Manager.
B. The gateway is not dropping the leading 9, and the PSTN fails.
C. The T302 timer is waiting to expire.
D. The caller does not have the PSTN partition in the CSS.
E. The caller dialed the wrong number.
F. To dial successfully, the caller must enter a Forced Authorization Code.
Answer: C
NEW QUESTION 79
In a single-site deployment model, the internal endpoints are unable to dial from one to the other. What are two possible causes? (Choose two.)
A. The PSTN gateway is not configured.
B. The called endpoint does not have the SIP trunk enabled.
C. The called endpoint is not registered.
D. The calling endpoint is not in the CSS of the called endpoint.
E. The called endpoint is not in the partition of the calling endpoint.
F. The calling endpoint is not configured for the correct CoS.
Answer: CF
NEW QUESTION 80
What is the default interval for SAF hello packets?
A. 15 seconds
B. 15 seconds on links with speeds that are slower than T1 speeds
C. 40 seconds
D. 40 seconds onlinks with speeds that are slower than T1 speeds
E. 60 seconds
F. 60 seconds onlinks with speeds that are slower than T1 speeds
Answer: F
NEW QUESTION 81
Which configuration can be dynamically set using the Cisco Unified Communications Manager Device Mobility feature?
A. phone model and protocol
B. SRST reference and directory number
C. CSS and local gateway
D. partition and CSS
E. media resources and permanent bridges
Answer: C
NEW QUESTION 82
Which configuration is required on Cisco TelePresence Server, in order to support 1080p resolution?
A. Screen licenses must be configured.
B. Cisco TelePresence Server must be in remotely managed mode.
C. Cisco TelePresence Server must be in HD mode.
D. Cisco TelePresence Server must be configured with Cisco TelePresence Conductor.
E. Cisco TelePresence Server must be in Full HD mode.
Answer: E
NEW QUESTION 83
A user is dialing an external PSTN number with a prefix of 01 from a Cisco TelePresence SX10 Quick Set in a Cisco VCS environment. In the past, the Cisco VCS and the ISDN gateway were correctly configured with a prefix of 01, but the calls are now failing. What are three possible causes? (Choose three.)
A. The Cisco VCS Control is down.
B. The interworking setting is turned off.
C. The audio feature in the Cisco TelePresenceSX10 is turned off.
D. The SIP trunk is not configured on the gateway.
E. 01 is not a valid prefix.
F. ISDN is not enabled on the Cisco TelePresenceSX10.
G. The Cisco TelePresenceSX10 is not registered to the Cisco VCS Control.
H. The Cisco TelePresenceSX10 is not registered to the Cisco Express C.
Answer: ABG
NEW QUESTION 84
When the command utils dbreplication status is executed on the Cisco Unified Communications Manager CLI, which step should be taken next to check the database replication status?
A. View the activelog file.
B. Run the same command on all nodes of the cluster.
C. Restart the Cisco CallManager service.
D. The command utils dbreplication runtimestate must be run on the publisher.
E. The command utils dbreplication runtimestate must be run on the subscriber.
Answer: A
NEW QUESTION 85
Which tool can you use to see SAF advertisements in Cisco Unified Communications Manager?
A. Cisco Unified Real-Time Monitoring Tool
B. show eigrp neighbors command
C. debug eigrp commands
D. Terminal Monitor
Answer: A
NEW QUESTION 86
URI dialing is enabled between two clusters with the default options. The engineer that set up the URI dialing verified that all was working properly. However, a user from one of the clusters cannot dial using URI to a user in the same cluster. What do you do to resolve this issue?
A. Verify the password that is used by the authentication under Intercluster Lookup Service configuration.
B. Find out if the URI address of the called user has a capital letter in the URI string.
C. Verify that Intercluster Lookup Service is set up correctly.
D. Verify USN Data Synchronization Status.
Answer: B
NEW QUESTION 87
……
And, These New 300-080 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-080 Dumps In PDF And VCE From — http://www.passleader.com/300-080.html
Good Luck !!!
Hi Guys,
I’m reviewing the questions on the new 300-080 dump (118q). There’s a drag and drop item question no.116 which have wrong answers.
1. One-way audio or video
2. Pixelation, smearing or pulsing
3. Degraded video quality
4. Codec no self-view
5. Echo issues
A. Different system manufacturer
B. Firewall with packet inspection enabled
C. Very high noise level
D. Packet loss
E. Main source is not main camera
On the dump the answer is:
A-2
B-4
C-1
D-5
E-3
The answer should be: (for me, and need your confirmation is this is correct)
A-3
B-1
C-5
D-2
E-4
And here’s my explanation and my opinion:
A. Different system manufacturer = 3. Degraded video quality
– For example a Cisco codec using H264 and other manufacturer using other video compression, during the call the video quality will be affected with mismatch video codecs with poor video quality. This is issue is encountered usually in a multipoint call hosted by Cisco MCU and even in Cisco endpoints.
B. Firewall with packet inspection enabled = One-way audio or video
– Firewall is the culprit for one way audio and video if media ports are not properly defined and opened on the firewall. Also caused by ALG enabled in firewall for deep inspection of SIP and H323 packets.
C. Very high noise level = 5. Echo issues
– Setting the audio gain level too high will add noise and of course very high audio levels will result to echo.
D. Packet loss = Pixelation, smearing or pulsing
– High percentage of Packet loss will affect the quality of video and audio. Pixelation in video and sometimes the audio is chocking when packet loss is experienced.
E. Main source is not main camera = 4. Codec no self-view
– When the Camera is not set as the main source, there will be no self-view so you cannot see your local video (near end).
Luckily Passed My 300-085 Exam Yesterday!!!
New Questions were Cisco TMS, Cisco VCS and so on!
Do Not Worry About The New Questions, They Were Easy To Answer!
And, I learned all new questions from passleader 300-085 dumps — http://www.passleader.com/300-085.html, all new Q&As are available in PL!
There is a question in the dump and something wrong with the answers. Please verify and agree with me if i’m correct:
Which three steps are necessary to configure Cisco VCS and TMS to support provisioning
functionalities? (Choose three.)
A. Activate LDAP synchronization on the VCS server to authenticate the end users.
B. Activate provisioning by installing the Device Provisioning option key on the VCS.
C. Create groups, users, and assign configuration templates and schemas to the groups on the
Cisco TMS.
D. Install FindME licenses on the Cisco TMS.
E. Configure phone book sources.
F. Configure a neighbor zone on VCS pointing to the TSMPE.
G. Configure the authentication policy on VCS for zones and subzones to “Do not Check
Credentials”.
Ans on dump is A,B,D.
A (not correct) – Integration to LDAP/AD is optional and is not mandatory for Provisioning feature between TMS and VCS. You can locally authenticate devices and users on VCS local database.
D (not correct) – FindMe license is activated on VCS and not on TMS!
My answer will be B,C,E.
@Fest Held, YES! YOU ARE RIGHT!
New questions on Cisco TMS, Cisco VCS were appeared in my yesterday’s actual test.
And, thanks for your kindly comment, I also passed exam by using PassLeader’s 300-085 dumps, 100% valid.
P.S. I found some new 300-085 questions have been published on PL’s Facebook home page here: https://tr.im/njyaW
Good Luck For All!
I cleared the 300-085 exam today with 9xx points! Used the 96q dump and it’s enough to pass the exam.
Good luck guys!
regards,
Sy