Share your CIPT2 v8.0 Experience

New question I got in exam
Which option can be implemented without MTP resouces , 2 Answers required(question not remember exactly)?
a) Multicast MOH
b) Early offer calls
c) Delayed offer calls

Hi thogadia,

Sorry to chase you on this, but can you kindly send the 355q dump to my email – tonanog_r at yahoo.com?

Hello!

Can you guys share the dump with me?

e_avelino at hotmail.com

Hello everyone,

Please can anyone with the 355q share with me, pleassseeeee?

{email not allowed}

Hello everyone,
Please can anyone with the 355q share with me, pleassseeeee?

ned3t at yahoo dot com

Hi,
Who can share
“Implementing Cisco IP Telephony and Video, Part 1 (CIPTV1) Foundation Learning Guide”
“Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Foundation Learning Guide”
“Troubleshooting Cisco IP Telephony and Video (CTCOLLAB) Foundation Learning Guide” ?
Thanks in advance.

@Student1

all you need is here

http://certcollection.org/forum/forum/183-ccvp-ccnp-voice-shares/

@SquierZ

Thanks! There are a lot of useful information.

@Martin Joseph

Thanks for your helpful comments!

I also passed the 300-075 exam yesterday, scored 960/1000!

All questions were from PassLeader 300-075 dumps, 100% valid!

Hi everyone,
Please can anyone with the 355q share with me, please?
ibmmaniamtl at gmail dot com

Thank you!!!

161q is valid the answers are just wrong and they have changed the wording of some questions which changes the answer. failed with 822 needed 860.

My friend lost xm with 355q dumps, 847!!! needed 860.
Seems more qns from outside…

Hi All,

I am planning to write CIPT -2 exam , still passleader ver 1.0 dump is valid ?

Hi all,

What is the current Dump version .

Hello!
Can you guys share the dump with me too, please?
sr_salari at hotmail dot com

thanks in advance

Hi i have one old dump , but today Pass leader has confirmed today they have uploaded new dump.
old dump is not valid now .

Hi Thogadia,

Can you please share 355q dump with me?
sr_salari at hotmail.com

ALSO Passed 300-075 exam yesterday!

NO new questions, BUT you should get correct answers from valid dumps (many free version dumps have wrong answers!!!)

I learned all questions from PassLeader 300-075 VCE dumps (http://www.passleader.com/300-075.html), wrong answers have been corrected by PL, 100% valid now!

P.S. PassLeader offer free VCE Simulator along with it VCE dumps, which saved me a lot to buy VCE Simulator.

Good Luck, All!

@Elberd, Is it 355q dump you studied and passed?

@ Elberd – Can you share us updated pdf ?

Hi guys,

here is the link for the 355q. Please update us once you’re finish with the exam

http://www.4shared.com/office/4Vsghhehce/300-075_-_355q.html

Hi All,

I just found 161Q download link from certcollection site. I am not sure this is the version that all question are valid but answers are incorrect. Please help to check and confirm 🙂

downloadlink
https://www.4shared.com/office/t0Fl9ZHAba/300-075.html

Thank you rupamc1983 for sharing us
source
http://certcollection.org/forum/topic/285588-ciptv2-latest-updates/page__st__28

Yeah I noticed examcollection scrubbed their site of Cisco stuff. All Cisco vce links redirect to homepage.

Cisco has shutdown TestKing and Actualtests which Examcollection is run by.

Guys and Girls, any news with regards to the 355q & 356q passleader file for 300-075 exam, is it enough to be able to clear that exam? Please advise, did anyone of sat the exam?

I tried the 161q actual test dump and didn’t clear my exam, alot of answer are wrong

I recommend you to not even think of using the 161q AT dump file is not valid and you will fail

So is this 355q passleader dump valid now ? The 161q might be not valid since last week. Can anyone confirm that?. It looks like passleader updated file on august the 12th.

Hi M8, the 355q passleader file looks like it is valid and enough to clear the exam. My friend is writing this exam next week and I will give you a feedback.

The 161q AT file is totally useless don’t even think about it. I will give you a detailed feedback once this girl is done writing next week. This chick is using the Books, videos and 355q file to prepare for her last ccnp collab exam -300-075.

Hi Guru,

Thanks, i will wait for your feedback. However is it possible to share 355q passleader dump?
i will study this dump in the meanwhile,

failed the exam…exam didnt look that tough but kicked me badly 84x/1000.

Any help to pass this monster will be highly appreciated – as always, one had more than one correct answer in mind and looks like my answers were wrong ones

Thanks Guru, waiting for your feedback then.

Hi SquierZ, M8, & Everyone,

Below please find the link for the 355q file as requested, please download it as soon as posible before this link expires today

https://mega.nz/#!JkZkGDLa

I will give you guys a feedback as soon as my sweet heart is done kicking that exam’s butt this week, i promised her a date then, lol I’m so naughty sometimes. Forgive me..

@ Zana, which dump did you use to prepare for your exam?? Please advise and share your experience to everyone remember that the VOICETUT site its a platfom that is put in place in order to help others.

Looks like the file is not availabe anymore.

Hi Guru,

Can you share it on dropbox or 4shared site. I think it’s good site for upload file.

Wish your gf pass this tough exam. Pray for her!!

Hello Everyone,

Sorry for the late response, today it was a very long day anyways below please find the Drop Box link

https://www.dropbox.com/s/0j2i9nepxyf0t20/300-075%20-%20355q.pdf?dl=0

Let me know once received

Thansks Guys, my sweet angel is going to pass this guru exam. I am also praying for her and have faith

I got it, thanks … and I’m waiting for your feedback after your gf is done with it.

Noted; I’ll keep you posted.

This file was the premium one on Examcollection before it was pulled down. Not sure if it’s still valid, maybe someone who has passed can confirm – http://exam-hub.com/get.php?vid=6271

VCE version – http://exam-hub.com/get.php?vid=5793-

Don’t have a PDF version, sorry. Maybe someone can convert it.

Bill here is online vce to pdf converter https://vceplus.com/vce-to-pdf/

Hi Everyone,

I have been doing extensive research on this exam and it’s requirements.
I’ve been on multiple forums and talking to people who are already CCNP
Collaboration certified. So i have put together my own VCE which i have
been using to practice. Will be sitting for an exam soon. If all goes well, i will feedback to all of you and share my study materials as well.

Wish me luck 🙂

All The Best 🙂

Thanks DP

Looks like we wont be getting any cisco materials from examcollection anymore. Have a look at this:

https://ecf.ctd.uscourts.gov/cgi-bin/show_public_doc?2015cv0965-22

All the best Manicsheep and thank you

By the way my girl I have finally passed the exam today score 98X, she said the 355q file is about 95% valid the only issue encountered is the dump have wrong answers.. lucky she had attend a full ccnp collab training, watched videos and studied all her manuals so she was capable to answers any question that was throwned at her by heart because she really knew her staff and what she have studied and trained for.

So guys good luck with your studies and exams.

Guess who is getting lucky tonight , lol ‘Me’ …. Going Out on Hot date… I’m so going to spoil her she really deserve it.

็Hi Guru,

Thanks for your feedback. Now i am still studying this dump and found some of answer are wrong.
After done all questions, i will share my prefer answer in this community to start discussion.

However, it would be great if your gf can share us the correct answer 🙂

Hope you enjoy last night i guess you didn’t sleep at all heh 😀

Greetings,

currently I’m CCNP Voice but I have to re-certify and migrate to CCNP Collaboration with this exam. Anyone to share some minds about the 355q. dump? Is it reliable?

@SquierZ I’m about to the the same and I wonder why Guru’s gf doesnt want to share her opinion about wrong answer, If it’s 95% correct so there might be about 20 wrong answers. Guru could you ask her which answers are wrong ?

HI Gurum,

Can you kindly ask your girlfriend what questions on the dump that has incorrect answers? Thanks in advance!

OK guys, as a conclusion this 355 dump is the most valid now, right? The only question is how many answers are wrong within it, right?

161 is about 80% valid however it also have wrong answers, the following questions are wrong/need to be checked carefully and verified

Q13,Q55,Q57,Q103,Q115,Q123,Q128,Q129,Q132,Q133,Q13 4,Q138,Q140,Q144,Q145,Q152,Q153,Q160

I am still awaiting for my girl to tell us which questions are wrong on the 355Q file

Remember I told you that I also have a friend who wrote the 300-075 exam 2 weeks ago, this gentlemen failed and got a score of 825. This gentleman likes shortcuts he only learned the 161q file only meaning if we can rectify the questions I have mentioned below then you guys can still pass the exam using the 161q file only.

Q13,Q55,Q57,Q103,Q115,Q123,Q128,Q129,Q132,Q133,Q13 4,Q138,Q140,Q144,Q145,Q152,Q153,Q160

But I will push this chick to share her experience because we really need her help on this one.

I did my CCNP Collab a long time ago, I am just helping

Can I also share the 161q file as well? Or you guys are good.

Share it, please share also once again the 355 dump.

Hi Guru Shanka,

Just to be clear, the items below are from the 161 dump, not from 355q right?

Q13,Q55,Q57,Q103,Q115,Q123,Q128,Q129,Q132,Q133,Q134,Q138,Q140,Q144,Q145,Q152,Q153,Q160

The we go..

Link for 161q file

https://www.dropbox.com/s/2f6pfoewza54ive/300-075%20AT%206.2.pdf?dl=0

Link for 335q file

https://www.dropbox.com/s/0j2i9nepxyf0t20/300-075%20-%20355q.pdf?dl=0

@ Voicechampion, you are correct my friend.

Guys please also do some reading and don’t rely too much on dumps.

People that use braindumps to pass their exams are only hurting themselves in the long run. At some point, they will have to apply their skills that they should have by nature of their certification. When they can’t perform, they’ll be shown the door. I realize this isn’t always the case, but I have seen my share of people with certifications run out the door because they could not perform to the level their certification demanded.

I suppose I could go on and on about how the braindump users swell the ranks of certified individuals with people who haven’t the slightest idea what they are doing and simply want a bigger check, but I wouldn’t be telling you anything you don’t already know.

The bottom line is simply that you either know the material or you don’t. It’s better to take a test and fail, then to guess and barely pass. At least by failing you have to go back and go over the sections you are deficient in. Barely passing without really understanding the material is going to hurt when you try and advance to a higher certification level. You might as well learn the stuff from the beginning.

Just my 2 cents.

Hi, I have cleared 300-075 yesterday with 355q dumps from Pass leader. Scored 908/1000

All the questions I have met in that exam are from the dumps but some have multiple answer selection which are with single options in dumps.

Thanks Guru Shanka for your help and sharing the 355q passleader dump.

Good luck all.

I encourage all of you to go and write this exam very soon before they update and change these questions

.

Hi Matt,

Can you share to us those questions that have multiple answers on the exam but single option in the dump? that will surely help us a lot!

Do you have this 355 dump in .vce format because ita annoying to see the answers before you read the question :)))

Hi, I passed the exam today using 161q, 933/100.
Questions are right, but 30-40% of the answers are wrong. You can verify them using forums or cisco docs.

Good luck all

KP surely you have the answers you have verified when you were busy preparing for your exam, just copy and paste and send those questions and answers to us please.
.

@Matt Best & KP, Congratulations on your exams. But I have a problem with the way you guys operate. You just tell us that you cleared the exam but you are not giving us more information and advising which questions you guys received. Please make everyone’s life easier and start sharing your experience.

Thank you in advanced.

Kindly regards,

BGW

Thanks BGW,

Guys please do that so that we all pass

I failed,if you do it this way you will have 847 score

Q17: C
Q22: A,C
Q34: A,D
Q35: A,C
Q48: D
Q75: B
Q84: A,C,D
Q91: A,B
Q93: B
Q95: B
Q96: B
Q103 B
Q104: C
Q115: D
Q116: C,D
Q117: A,B,F
Q118: D
Q121: A,B
Q122: A,B
Q123: A,E
Q124: D
Q125: A,B,C
Q126: B,C,E
Q127: search rules
Q128: B
Q129: E
Q130: A
Q131: B
Q132: A
Q134: B,D
Q135: D
Q136: C
Q137: C,D
Q138: A,B,E
Q139: A
Q140: B,E,F
Q141: D,E
Q143: A,B,D
Q144: B
Q145: B
Q146: D,E
Q148: A,E
Q149: B,C
Q150: B
Q152: C,E
Q153: B
Q154: C
Q155: D
Q157: C
Q158: A
Q159: B,C,D
Q160: C
Q161: B,D,F

can u share 161q to saikattt at yahoo.com. thank you in advance

Guru Shanka, on behalf of everybody – THANK YOU for sharing all your minds! Do you have 161Q and 355Q in .vce format? T

hi does anyone know of any dumps or websites like security tut for the Juniper JNCIA JNO-102 exam ? if yes I am at traitt7 (at) yahoo (dot) com

hi does anyone know of any dumps or websites like voice tut for the Juniper JNCIA JNO-102 exam ? if yes I am at traitt7 (at) yahoo (dot) com

@SUMADIA

What did you use to prepare?

Guru why dont you share the questions with right answers since youre ccnp you should know all the answers. We know know its not fair but some questions are not clear and it makes it difficult to answer even when youre prepared thats why we must discuss a few.

Hey Guys,

We really need to join heads and work together, you guys can expect one person to do everything for you. Like I said before please do really too much on these shortcuts named dumps infact we need to utilize this VoiceTUT platform correctly rember this is not a dump sharing site its a dicusion

which 2 things do not utlise MTP
a. h.323 fast start
b. IPV6 -IPV4 transform
c. DTMF inband RTP-NTE (rfc2833)
d. delayed offer h.323
Answer: A,B

Hardware MTP requires 2 things:
a. PVDM or DSP resource
b. LTI local transcode resource
c. ref2833
d. one audio codec
e. T1 PRI card
Answer: A,B

SCCP phones register to how many nodes?
a. 1
b. 2
c. 3
d. 4
Answer: B

VCS monitors Presence Status using what:
a. start call
b. registration
c. end call
d. call starting
Answer: B

When you configure a globalized dial plan, in which three ways can you enable ingress gateways to process calls? (Choose three.)
A. Configure the called-party transformation settings for incoming calls on H.323 gateways.
B. Configure translation patterns in the partitions used by the gateway calling search space.
C. Configure SIP trunks between Cisco Unified Communications Manager clusters.
D. Configure a remote site device pool.
E. Configure a hunt group.
F. Configure the gateway with prefix digits to add necessary country and region codes.
Answer: ABF

What is the correct value to use for the “DSCP for TelePresence Calls” Cisco CallManager service parameter?
A. 28 (011100)
B. 34 (100010)
C. 41 (101001)
D. 46 (101110)
Answer: B

Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate
external calls, VCS Expressway is deployed and traversal server zone is set up there. Video
endpoints inside Company X have registered but are unable to receive calls from outside
endpoints. Which option could be the cause of this issue?
A. The access control list on the VCS Control must be updated with the IP for the external users.
B. When a traversal zone is set up on VCS Control only outbound calls are possible.
C. The local zone on the VCS Control does not have a search rule configured.
D. The traversal zone on the VCS Control does not have a search rule configured.
ANSWER: C

Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure?
A. SRST with MGCP fallback
B. Cisco Unified Communications Manager Express in SRST mode
C. SRST without MGCP fallback
D. SRST with VoIP dial peers to Cisco Unified Communications Manager Express
Answer: B

Which three tests can you perform to verify redundancy in the customer environment? (Choose three.)
A. Verify that all phones are registered to a second subscriber server.
B. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected.
C. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers.
D. Verify that media resources fail over to a secondary subscriber server when the publisher fails.
E. Verify that SCCP fallback is configured in Cisco Unified Communications Manager.
F. Verify that the H.323 redundant connection is active.
Answer: CDF

Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones? (Choose three.)
A. Configure voice register pool.
B. Configure telephony service.
C. Configure a phone NTP reference.
D. Configure the SIP registrar.
E. Configure an SRST reference.
F. Configure voice register global dn.
Answer: AEF

What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified Communications Manager?
A. CS4/32
B. CS6/48
C. EF/46
D. AF41/34
E. CS3/24
Answer: A

Which statement about the function of the “+” symbol in the E.164 format is true?
A. The “+” symbol matches the preceding element one or more times.
B. The “+” symbol matches the preceding element zero or one time.
C. The “+” symbol represents the international country code.
D. The “+” symbol represents the international call prefix.
Answer: D

A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications
Manager, but is not registering properly. What is causing this failure?
A. The location Hub_None has not been activated.
B. Device Pool cannot be default.
C. The DX650 Phones does not support SIP.
D. The DX650’s MAC address is incorrect in the Cisco UCM.
E. The DX650 is the incorrect calling search space.
Answer: D

What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints?

(Choose two.)
A. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS.
B. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM.
C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS.
D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM.
E. Media Resource Group List.
Answer: AB

Which two options enable routers to provide basic call handling support for Cisco Unified IP Phones if they lose connection to all
Cisco Unified Communications Manager systems? (Choose two.)
A. SCCP fallback
B. MGCP fallback
C. Cisco Unified Survivable Remote Site Telephony
D. Cisco Unified Communications Manager Express
E. Cisco Unified Communications Manager Express in SRST mode
Answer: BE

Which two types of devices are affected when an engineer changes the DSCP for Video Calls
service parameter? (Choose two.)
A.DX-650
B.Cisco Jabber Desktop
C.CP-7965
D.EX-60
E.MX-200
Answer: A,C

A presales engineer is working on a quote for a major customer and must evaluate how many cisco VCS Expressway traversal call licenses for which to plan.
Calls to and from which three routes must the engineer include in the tally?
A. gateway
B. Cisco 9971 Endpoint
C. border controllers
D. gatekeeper
E. SIP trunk
F. VCS
Answer: D,E,F

An engineer is performing an international multisite deployment and wants to create an effective backup method to access TEHO destinations in case the call limit triggers. Which technology provides this ability?
A. AAR
B. SRST
C. CFUR
D. LRG
Answer: A

Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)
A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses.
C. Create one neighbor zone in VCS for each Unified CM node.
D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node.

Correct: AE

Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)
A. The Advanced Networking or Dual Network Interfaces option key has been installed.
B. VCS rewrites the Layer 3 source address of outbound SIP and H.323 packets to 209.165.200.230.
C. VCS applies 209.165.200.230 to outbound SIP and H.323 payload messages.
D. With static NAT enabled on the LAN2 interface, VCS applies 209.165.200.230 to outbound H.323 and SIP payload traffic exiting the LAN1 interface.

Correct AC

Which configuration does Cisco recommend for the peer address on the Expressway-C secure traversal zone when the Expressway-E has one NIC enabled?
A. Expressway-E internal IP address
B. Expressway-E external IP address
C. Expressway-E internal FQDN
D. Expressway-E external FQDN

Correct B

Which function can be implemented without MTP resources?
A.DTMF relay conversion
B.terminating a media stream that uses the same codec
C.music on hold
D.SIP early offer

B or C

Hey Guys,

We really need to join heads and work together, you guys can expect one person to do everything for you. Like I said before please do really too much on these shortcuts named dumps infact we need to utilize this VoiceTUT platform correctly remember this is not a dump sharing site its a discussion site and were professional individuals share their experiences and work together to achieve a certain goal.

which 2 things do not utlise MTP
a. h.323 fast start
b. IPV6 -IPV4 transform
c. DTMF inband RTP-NTE (rfc2833)
d. delayed offer h.323
Answer: A,B
Hardware MTP requires 2 things:
a. PVDM or DSP resource
b. LTI local transcode resource
c. ref2833
d. one audio codec
e. T1 PRI card
Answer: A,B
SCCP phones register to how many nodes?
a. 1
b. 2
c. 3
d. 4
Answer: B
VCS monitors Presence Status using what:
a. start call
b. registration
c. end call
d. call starting
Answer: B
When you configure a globalized dial plan, in which three ways can you enable ingress gateways to process calls? (Choose three.)
A. Configure the called-party transformation settings for incoming calls on H.323 gateways.
B. Configure translation patterns in the partitions used by the gateway calling search space.
C. Configure SIP trunks between Cisco Unified Communications Manager clusters.
D. Configure a remote site device pool.
E. Configure a hunt group.
F. Configure the gateway with prefix digits to add necessary country and region codes.
Answer: ABF
What is the correct value to use for the “DSCP for TelePresence Calls” Cisco CallManager service parameter?
A. 28 (011100)
B. 34 (100010)
C. 41 (101001)
D. 46 (101110)
Answer: B
Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate
external calls, VCS Expressway is deployed and traversal server zone is set up there. Video
endpoints inside Company X have registered but are unable to receive calls from outside
endpoints. Which option could be the cause of this issue?
A. The access control list on the VCS Control must be updated with the IP for the external users.
B. When a traversal zone is set up on VCS Control only outbound calls are possible.
C. The local zone on the VCS Control does not have a search rule configured.
D. The traversal zone on the VCS Control does not have a search rule configured.
ANSWER: C
Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure?
A. SRST with MGCP fallback
B. Cisco Unified Communications Manager Express in SRST mode
C. SRST without MGCP fallback
D. SRST with VoIP dial peers to Cisco Unified Communications Manager Express
Answer: B
Which three tests can you perform to verify redundancy in the customer environment? (Choose three.)
A. Verify that all phones are registered to a second subscriber server.
B. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected.
C. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers.
D. Verify that media resources fail over to a secondary subscriber server when the publisher fails.
E. Verify that SCCP fallback is configured in Cisco Unified Communications Manager.
F. Verify that the H.323 redundant connection is active.
Answer: CDF
Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones? (Choose three.)
A. Configure voice register pool.
B. Configure telephony service.
C. Configure a phone NTP reference.
D. Configure the SIP registrar.
E. Configure an SRST reference.
F. Configure voice register global dn.
Answer: AEF
What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified Communications Manager?
A. CS4/32
B. CS6/48
C. EF/46
D. AF41/34
E. CS3/24
Answer: A
Which statement about the function of the “+” symbol in the E.164 format is true?
A. The “+” symbol matches the preceding element one or more times.
B. The “+” symbol matches the preceding element zero or one time.
C. The “+” symbol represents the international country code.
D. The “+” symbol represents the international call prefix.
Answer: D
A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications
Manager, but is not registering properly. What is causing this failure?
A. The location Hub_None has not been activated.
B. Device Pool cannot be default.
C. The DX650 Phones does not support SIP.
D. The DX650’s MAC address is incorrect in the Cisco UCM.
E. The DX650 is the incorrect calling search space.
Answer: D
What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints?
(Choose two.)
A. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS.
B. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM.
C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS.
D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM.
E. Media Resource Group List.
Answer: AB
Which two options enable routers to provide basic call handling support for Cisco Unified IP Phones if they lose connection to all
Cisco Unified Communications Manager systems? (Choose two.)
A. SCCP fallback
B. MGCP fallback
C. Cisco Unified Survivable Remote Site Telephony
D. Cisco Unified Communications Manager Express
E. Cisco Unified Communications Manager Express in SRST mode
Answer: BE
Which two types of devices are affected when an engineer changes the DSCP for Video Calls
service parameter? (Choose two.)
A.DX-650
B.Cisco Jabber Desktop
C.CP-7965
D.EX-60
E.MX-200
Answer: A,C
A presales engineer is working on a quote for a major customer and must evaluate how many cisco VCS Expressway traversal call licenses for which to plan.
Calls to and from which three routes must the engineer include in the tally?
A. gateway
B. Cisco 9971 Endpoint
C. border controllers
D. gatekeeper
E. SIP trunk
F. VCS
Answer: D,E,F
An engineer is performing an international multisite deployment and wants to create an effective backup method to access TEHO destinations in case the call limit triggers. Which technology provides this ability?
A. AAR
B. SRST
C. CFUR
D. LRG
Answer: A
Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)
A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses.
C. Create one neighbor zone in VCS for each Unified CM node.
D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node.
Correct: AE
Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)
A. The Advanced Networking or Dual Network Interfaces option key has been installed.
B. VCS rewrites the Layer 3 source address of outbound SIP and H.323 packets to 209.165.200.230.
C. VCS applies 209.165.200.230 to outbound SIP and H.323 payload messages.
D. With static NAT enabled on the LAN2 interface, VCS applies 209.165.200.230 to outbound H.323 and SIP payload traffic exiting the LAN1 interface.
Correct AC
Which configuration does Cisco recommend for the peer address on the Expressway-C secure traversal zone when the Expressway-E has one NIC enabled?
A. Expressway-E internal IP address
B. Expressway-E external IP address
C. Expressway-E internal FQDN
D. Expressway-E external FQDN
Correct B
Which function can be implemented without MTP resources?
A.DTMF relay conversion
B.terminating a media stream that uses the same codec
C.music on hold
D.SIP early offer
B or C

Hey Guys,
We really need to join heads and work together, you guys can expect one person to do everything for you. Like I said before please dont rely too much on these shortcuts named dumps in fact we need to utilize this VoiceTUT platform correctly remember this is not a dump sharing site its a discussion site and were professional individuals share their experiences and work together to achieve a certain goal.

which 2 things do not utlise MTP
a. h.323 fast start
b. IPV6 -IPV4 transform
c. DTMF inband RTP-NTE (rfc2833)
d. delayed offer h.323
Answer: A,B
Hardware MTP requires 2 things:
a. PVDM or DSP resource
b. LTI local transcode resource
c. ref2833
d. one audio codec
e. T1 PRI card
Answer: A,B
SCCP phones register to how many nodes?
a. 1
b. 2
c. 3
d. 4
Answer: B
VCS monitors Presence Status using what:
a. start call
b. registration
c. end call
d. call starting
Answer: B
When you configure a globalized dial plan, in which three ways can you enable ingress gateways to process calls? (Choose three.)
A. Configure the called-party transformation settings for incoming calls on H.323 gateways.
B. Configure translation patterns in the partitions used by the gateway calling search space.
C. Configure SIP trunks between Cisco Unified Communications Manager clusters.
D. Configure a remote site device pool.
E. Configure a hunt group.
F. Configure the gateway with prefix digits to add necessary country and region codes.
Answer: ABF
What is the correct value to use for the “DSCP for TelePresence Calls” Cisco CallManager service parameter?
A. 28 (011100)
B. 34 (100010)
C. 41 (101001)
D. 46 (101110)
Answer: B
Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate
external calls, VCS Expressway is deployed and traversal server zone is set up there. Video
endpoints inside Company X have registered but are unable to receive calls from outside
endpoints. Which option could be the cause of this issue?
A. The access control list on the VCS Control must be updated with the IP for the external users.
B. When a traversal zone is set up on VCS Control only outbound calls are possible.
C. The local zone on the VCS Control does not have a search rule configured.
D. The traversal zone on the VCS Control does not have a search rule configured.
ANSWER: C
Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure?
A. SRST with MGCP fallback
B. Cisco Unified Communications Manager Express in SRST mode
C. SRST without MGCP fallback
D. SRST with VoIP dial peers to Cisco Unified Communications Manager Express
Answer: B
Which three tests can you perform to verify redundancy in the customer environment? (Choose three.)
A. Verify that all phones are registered to a second subscriber server.
B. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected.
C. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers.
D. Verify that media resources fail over to a secondary subscriber server when the publisher fails.
E. Verify that SCCP fallback is configured in Cisco Unified Communications Manager.
F. Verify that the H.323 redundant connection is active.
Answer: CDF
Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones? (Choose three.)
A. Configure voice register pool.
B. Configure telephony service.
C. Configure a phone NTP reference.
D. Configure the SIP registrar.
E. Configure an SRST reference.
F. Configure voice register global dn.
Answer: AEF
What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified Communications Manager?
A. CS4/32
B. CS6/48
C. EF/46
D. AF41/34
E. CS3/24
Answer: A
Which statement about the function of the “+” symbol in the E.164 format is true?
A. The “+” symbol matches the preceding element one or more times.
B. The “+” symbol matches the preceding element zero or one time.
C. The “+” symbol represents the international country code.
D. The “+” symbol represents the international call prefix.
Answer: D
A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications
Manager, but is not registering properly. What is causing this failure?
A. The location Hub_None has not been activated.
B. Device Pool cannot be default.
C. The DX650 Phones does not support SIP.
D. The DX650’s MAC address is incorrect in the Cisco UCM.
E. The DX650 is the incorrect calling search space.
Answer: D
What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints?
(Choose two.)
A. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS.
B. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM.
C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS.
D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM.
E. Media Resource Group List.
Answer: AB
Which two options enable routers to provide basic call handling support for Cisco Unified IP Phones if they lose connection to all
Cisco Unified Communications Manager systems? (Choose two.)
A. SCCP fallback
B. MGCP fallback
C. Cisco Unified Survivable Remote Site Telephony
D. Cisco Unified Communications Manager Express
E. Cisco Unified Communications Manager Express in SRST mode
Answer: BE
Which two types of devices are affected when an engineer changes the DSCP for Video Calls
service parameter? (Choose two.)
A.DX-650
B.Cisco Jabber Desktop
C.CP-7965
D.EX-60
E.MX-200
Answer: A,C
A presales engineer is working on a quote for a major customer and must evaluate how many cisco VCS Expressway traversal call licenses for which to plan.
Calls to and from which three routes must the engineer include in the tally?
A. gateway
B. Cisco 9971 Endpoint
C. border controllers
D. gatekeeper
E. SIP trunk
F. VCS
Answer: D,E,F
An engineer is performing an international multisite deployment and wants to create an effective backup method to access TEHO destinations in case the call limit triggers. Which technology provides this ability?
A. AAR
B. SRST
C. CFUR
D. LRG
Answer: A
Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)
A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses.
C. Create one neighbor zone in VCS for each Unified CM node.
D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node.
Correct: AE
Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)
A. The Advanced Networking or Dual Network Interfaces option key has been installed.
B. VCS rewrites the Layer 3 source address of outbound SIP and H.323 packets to 209.165.200.230.
C. VCS applies 209.165.200.230 to outbound SIP and H.323 payload messages.
D. With static NAT enabled on the LAN2 interface, VCS applies 209.165.200.230 to outbound H.323 and SIP payload traffic exiting the LAN1 interface.
Correct AC
Which configuration does Cisco recommend for the peer address on the Expressway-C secure traversal zone when the Expressway-E has one NIC enabled?
A. Expressway-E internal IP address
B. Expressway-E external IP address
C. Expressway-E internal FQDN
D. Expressway-E external FQDN
Correct B
Which function can be implemented without MTP resources?
A.DTMF relay conversion
B.terminating a media stream that uses the same codec
C.music on hold
D.SIP early offer
B or C

From where are those questions – 355Q dump and they are wrong there or?

And could you explain this from what perspective they will be affected?

Which two types of devices are affected when an engineer changes the DSCP for Video Calls
service parameter? (Choose two.)
A.DX-650
B.Cisco Jabber Desktop
C.CP-7965
D.EX-60
E.MX-200

Answer: A,C

Why voice only phone is gonna be affected by changing video DSCP?

MANICSHEEP

161q dump

Guru this is madness, do you really believe these are correct answers 🙂 ?

Which statement about the function of the “+” symbol in the E.164 format is true?
A. The “+” symbol matches the preceding element one or more times.
B. The “+” symbol matches the preceding element zero or one time.
C. The “+” symbol represents the international country code.
D. The “+” symbol represents the international call prefix.
Answer: D

Based on the of CIPT 2 official book the correct answer is C! Also look what Wikepedia sais:

The presentation of a number is usually prefixed with the plus sign (+), indicating that the number includes the country calling code.

Almost of the answers you gave are also wrong 🙂

Actually sipPbx youre wrong too, ” + ” is an international call prefix

Yeah, you are right. Its international call prefix. What do you think about the rest of the questions? This one with DSCP for voice phone?

I think correct is a and b, ex and mx are telepresence endpoints.

sipPbx

A.DX-650
B.Cisco Jabber Desktop
C.CP-7965
D.EX-60
E.MX-200

A,B 100%

Whats your opinion about the rest of the questions posted here?

Ok guys, lets correct those questions which we think are incorrect?

In example:

SCCP phones register to how many nodes?
a. 1
b. 2
c. 3
d. 4
Answer: B

how is it possible the phone to be registered in 2 nodes? It’s registered in 1 node and if the node is down the phone registers into the second, third and etc…

Hi sippbx,

Phones are usually registered to 2 nodes – primary and backup

Hi Guys,

Need your 2 cents on these 2 questions:

QUESTION NO: 55
The network administrator of Enterprise X receives reports that at peak hours, some calls between
remote offices are not passing through. Investigation shows no connectivity problems. The
network administrator wants to estimate the volume of calls being affected by this issue.
Which two RTMT counters can give more information on this? (Choose two.)
A.
CallsRingNoAnswer
B.
OutOfResources
C.
LocationOutOfResources
D.
RequestsThrottled
E.
CallsAttempted

Answer: B,C – this seems incorrect. B. OutofResources seems to be very vague as there are lots of outofresources counters (ex mtp,Video etc) in RTMT. The only outofresources counter that fits this question is the LocationOutOfResources
which is one of the given answers. Im thinking it should be E – CallsAttempted – as it will show the number of failed calls during the outage

QUESTION NO: 147

Which two steps must you take when implementing TEHO in your environment? (Choose two.)
A.
Implement local failover.
B.
Implement SIP to POTS.
C.
Load-balance PRI connections.
D.
Load-balance route lists within the cluster.
E.
Implement ICT trunks to remote locations.
F.
Implement centralized failover.

Should it be AD or DF? I cant find any cisco article about this. Some forums says that its A and F, but these are 2 different methods in implementing TEHO.

Which answers from Guru you are thinking are wrong?

The 355q passleader is valid but the answers are just wrongly answered and they have changed the wording of some questions which changes the answers. I Failed the exam today with 855 needed 860, this was so close I even cried.

Could you give us an example? So its valid? All the questions came from it?

Yes ulraZ, all questions came from the 355q file dump but they have change the wording on some questions

If we can study the 355q file & rectify it then will pass this exam once and for all.

DO u remember one changet as an example?

Passed 300-075 exam yesterday with 950/1000 marks!

Just mainly learned questions from PassLeader 300-075 dumps, all questions were same as my actual 300-075 test.

Here are some free PassLeader 300-075 dumps for referring:

https://drive.google.com/open?id=0B-ob6L_QjGLpSlBUZHQxc19EWHM