Share your CIPT2 v8.0 Experience

@ManicSheep , Congrats for your pass.

Please Can you Share the VCE/PDF to use for the exam.

My email is : {email not allowed}

Best Regards

@ManicSheep my mail is :

cvicentep () hotmail com

Guys, lets summarize:

1.

Guys, lets summarize:

1. 358Q&A is no longer valid?
2. 161Q&A is no longer valid?
3. MAnicSheep is basedon 161Q&A and is valid?

I’m wrong? Anyone took the exam today?

@ManicSheep, could you please share your dump at fakedummt (at) gmail (dot) com

Hello beautiful People,

I hope you are well. I also have bad news!

I failed my exam too with 8xx points and it’s so sad because I used all the three dumps (161, 355, 356q) plus my courseware. To be honest with you, the certifications owners are monitoring this site and whatever we discuss here they will know it and they will keep updating these exams and changing questions. So my suggestion to is please open an underground study group or private platform because whatever you discuss in public it will be picked up and you will be caught. Dump sites are getting shutdown and sued and individuals are getting life time ban and most of them lose their jobs and careers. So please be careful.

Before cisco decide to ban you thay have to CORRECT their exams! Do u remember any new question or something like this…just to see the way they change it.

I agree with you SimplyCasual but this people have power and they can do anything they want so be careful my friend. Let me send you what to expect…

What are the tasks required to route calls from H323 to SIP and vice versa?

A. Config-protocols-Interworking-On

B. Config-protocols-Interworking-Off

c. Config-protocols-Interworking-registered only

D. Config-protocols-Sip-Config-Mode-On

e. Config-protocols-H323-H323Mode-On

Why the answer should be AE?

I suspect it to be A and C

QUESTION NO: 136

Refer to the exhibit.

Which option describes the effect of this configuration?

A.It implements Cisco UNITED CME redundancy.

B.It configures a standby Cisco Unified E.

C.It configures failover.

D.It implements Cisco IOS redundancy.

E.It creates dial peers.

F.It implements HSRP.

 

Which two commands verify Cisco IP Phone registration? (Choose two.)

Changed question:

What are the two commands, one of which can be used to verify SIP phone registration and one can be used to verify SCCP phone registration in CME?

A. show telephony-service ephone-dn

B. show voice register session-server

C. Show ephone registered

D. show ccm-manager hosts

E. show sip-ua status registrar

Answers remains the same: C, E

Refer to the exhibit (screenshot of Transform where some field are popluted).

Pattern type : Regex

Pattern string : ccnpcolab

Pattern Behaviour : Add Suffix

Replace string : @cisco.com

State : Disabled

A call is initiated from endpoint to address “ccnpcolab” from a VCS where the above configuration is applied. Which of the below statements is true?

A. Can not route call

B.Sent to Cisco.com

C. sent as CCNPCOLAB

D. Sent as {email not allowed}

Answer: C (note the status of transform is disabled, which means the dialed URI is NOT BEING transformed and is sent in its original form)

—————————–

Which two statements about Cisco Unified Communications Manager Extension Mobility are true? (Choose two.)

A. After an autogenerated device profile is created, you can associate it with one or more users.

B. An autogenerated device profiles can be loaded on a device at the same time as a user profile.

C. When Logged off the device can be set to use an autogenerated profile or a user defined profile

D. A device profile has most of the same attributes as a physical device.

E. Devices can be configured to allow more than one user to be logged in at the same time.

Answer: C, D (100% score report on this topic)

——————————————-

 

 

 

QUESTION NO: 118 this is no more valid question, it now says:

How many nodes can a phone establish a SCCP connection to at the same time?

C. 1

——————————————

Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate external calls,

VCS Expressway is deployed and traversal server zone is set up there. Video endpoints inside Company X have registered,

But are unable to receive calls from outside endpoints. Which option could be the cause of this issue?

A. The traversal zone on the VCS Control does not have a search rule configured.

B. The access control list on the VCS Control must be updated with the IP for the external users.

C. When a traversal zone is set up on VCS Control only outbound calls are possible.

D. The local zone on the VCS Control does not have a search rule configured.

Answer I selected: D 

-but due to my 75% score report on VCS I would say that better is to go with option A 

————————————————

Which option describes the effect of this configuration? (Two identical configurations of CME router)

A. It implements Cisco United CME redundancy. (The word UNITED is there by purpose, meaning this is false answer)

B. It configures a standby Cisco Unified E.

C. It configures failover.

D. It implements Cisco IOS redundancy.

E. It creates dial peers.

F. It implements HSRP.

Answer: C (100% score report on this topic)

 

 

You have deployed a Cisco 2821 ISR to perform as an SRST voice gateway at a remote site. During a network failure between

The remote site and the central office, some of the phones located at the remote site are unable to make phone calls.

Which two options are potential causes of the problem? (Choose two.)

A. The site has exceeded the number of SRST endpoints supported by the voice gateway.

B. The ccm-manager fallback command is configured incorrectly on the voice gateway.

C. Phones at the remote site are assigned to the incorrect device pool.

D. The ccm-manager fallback-mgcp command is configured incorrectly on the voice gateway.

E. The site has exceeded the number of simultaneous calls allowed in SRST mode.

Answer: A,C

——————————————-

Which function can be implemented without MTP resources?

-Regarding this question – it comes in multiple combinations, but keep in mind

-MTP required:

DTMF relay conversion

DTMF inband RTP-NTE (rfc2833)

Terminating a media stream that uses the same codec

H.323 Outbound Fast Start

SIP early offer

IPv4 to IPv6 conversion

-MTP NOT required:

Multicast music on hold

Delayed offer h.323

SIP delay offer 

—————————————–

 

 

Which statement about when user A calls user С using SIP are true?

A. SIP TCP/TLS ports must be opened from internal to DMZ and vice versa.

B. Deploying a Cisco VCS Expressway behind a NAT mandates the use of the Advanced Networking option key.

C. Cisco VCS Control and Cisco VCS Expressway support static NAT.

D. Deploying a Cisco VCS Control inside a NAT mandates the use of the Advanced Networking option key.

E. RTР and RTCP ports must be opened at the firewall from internal to DMZ and vice versa

F. The NAT device must translate from 10.X.X X to 193.1.1.X and vice versa.

Answer: B !!!!

-note: I have selected A in the exam, apparently I was wrong due to lower score report on this topic

Your company’s main number is 408-526-7209, and your employee’s directory numbers are 4-digit numbers.

Which option should be configured if you want outgoing calls from 4-digit internal directory number to be?

Presented as a 10-digit number?

A. calling party transformation pattern filed in Route Pattern

B.AAR group

C. translation pattern

D. route pattern

Answer: A (has changed and makes more sense now) 

What are the tasks required to route calls between H323 and SIP ENDPOINTS and vice versa?

A. Config-protocols-Interworking-On

B. Config-protocols-Interworking-Off

c. Config-protocols-Interworking-registered only

D. Config-protocols-Sip-Config-Mode-On

e. Config-protocols-H323-H323 Mode-On

My answer AE, but apparently this combination is wrong (due to lower VCS score report)

Use that and your 161q file and you will be fine

But whats the difference between 161Q and 358Q?

I don’t have the 358q & didn’t use it may be it’s a new updated dump. Share it and will tell you

Hi Wilder,

When you took the exams, how many new questions does it have? based on the comments above, about 90% are new. Can you enlighten us?

Thanks alot for your inputs above.

OK just to clarify. All of you reported that there are 90% new questions on the exam. But it seems that they are not purely new, just changed the existing question?

What are the tasks required to route calls between H323 and SIP ENDPOINTS and vice versa?

A. Config-protocols-Interworking-On

B. Config-protocols-Interworking-Off

c. Config-protocols-Interworking-registered only

D. Config-protocols-Sip-Config-Mode-On

e. Config-protocols-H323-H323 Mode-On

My answer AE, but apparently this combination is wrong (due to lower VCS score report)

I have a VCS in place…

Determines whether or not the VCS acts as a gateway between SIP and H.323 calls.

Off: the VCS will not act as a SIP-H.323 gateway.

Registered only: the VCS acts as a SIP-H.323 gateway but only if at least one of the endpoints is locally registered.

On: the VCS acts as SIP-H.323 gateway regardless of whether the endpoints are locally registered.

Default: Registered only

H.323 mode on determinates only of the VCS can act as a H.323 GK. So it should be A and C.

Correct they have changed the wording of most questions

Can you site some examples Wilder? Anything you can remember

Hi Wilder,

Please give us your email so we can share to you the 358q. but basically, its just the 355 with some
corrected answer and 2 -3 new questions.

I just checked the 358q file guys that file looks valid and I can confirm that all questions came from it. Please distribute it to everyone so that we can all use it.

Thank you.

Van Wilder

When did u took the exam? All other guys that failed? Did u see this dump?

Hi Guys,

I’m planning on doing a recert for my existing certifications and need to complete the CIPTv2 exam.
Could someone please share the 358q and the 161q files (either VCE or PDF).

Will share my exam experience once completed 🙂

email: umkipiti [at] gmail [dot] com

Thanks in advance guys!

161q is included in 356q, on real exam i had 95% questions from 161q . Some questions are slightly different or there are more answers then dumps show. Good luck. I agree that we should start some kind of closed “underground” forum where we could discuss these exams.

So 🙂 Anybody want to share those dumps? 🙂
sayroute (at) gmail (dot) com

Hi Abdulusa,

When did you take the exam? Is it today?

Hello Abdulusa, first of all congrats, dude! So in a conclusion – 358Q&A is in most percent valid, but there are some questions are slightly different or there are more answers?

I passed 2 days ago, 357q was/is valid. Questions are kind of corrected and more clear than in dumps. Some questions say its one answer in dumps but you must mark one more or less answers in real exam.

Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone so that users see the calling number in local format?

A. Calling number localization is done using translation pattern
B. Calling number localization is done using route patterns
C. Calling number localization is done by configuring calling party transforms CSS at the phone
D. Calling number localization is done by configuring calling party transforms CSS at the gateway

Answer: C

Why C and not D?

Yep, it shoud be C…

This setting allows you to localize the calling party number on the device. Make sure that the Calling Party Transformation CSS that you choose contains the calling party transformation pattern that you want to assign to this device.

357 & 358q file is definitely valid.

A friend passed today

Could you share those dumps?
sayroute (at) gmail (dot) com

What is the main difference between 355 and 358? I mean is only 3 new questions to form 358q? Can someone explain me that please

Where is this 357 dump? Kerca shared 356 dump from Passleaders which actually has 358Q&A.

@Abdulusa, what dump u have used – 357 (358) from Kerca?

Hi The Bully of books, please can you share the dump 300-075… {email not allowed}
thanks

Hi all, any please share the 357 & 358q in google drive

Answering my own questions, let me tell you that today I passed my exam with the 365q with an score of 933, even though some questions appeared to be the same, they are a little tricky, for example the one that asked something about the requesites of MTP, you need to know all of them, because is a little different and has other options.

What I recommend, is that do not learn all the question by answer, but instead try to understand what they are requiring and based on that you can do your own notes and then with all the research you do per each question you can have a really good understanding of the technology and once they ask you something sligthly different from the 365q, you inmediately can answer as you learn in your own notes or even in the youtube videos that are really fantastic, you´ll learn a lot of.

Alex, please can you share the 365q?

Guys, stop confusing the people! There is not 365Q&A dump! There is 355 (which is acual 358) Q&A dump which Kerca already shared a couple of pages ago!

Lets focus on this 358 dump!

I passed today as well, the 357 & 358q file is valid.

@Honey Bubu, congrads!

Which is this 357 dump? 358 is that one Kerca shared? Please confirm! Any new questions?

@Abdulusa,

which is this 357 dump? Is this one 358 from Kerca?

I can’t hear antynihg over the sound of how awesome this article is.

SimplyCasual share the o link of dump please

@Kerca or @Hopney Bubu please can you share the file with 357 & 358 q

my mail is : cvicentep () hotmail .com

@Kerca and @Hopney Bubu please share the file with 357 & 358 q
my mail is : junednexian () gmail .com
Many thanks

This is the file for 355q I used to studied for my exam today:

https://www.dropbox.com/s/0j2i9nepxyf0t20/300-075%20-%20355q.pdf?dl=0

I know that need to fo to the troubleshooting forum, but has someone has the 300-080 new test?? That can share by here.

Regards

Voice tut, why u have deleted my post?

I passed, Thanks everyone!

Congratulations Milosh. With which dump did you passed?

Which dump is valid guys i need to know.. !!! please let me know the right dump ??

358q Kerca

Hi Milosh and everyone!

Where is the link 358q kerca? I only find 355q Kerca –> (https://www.dropbox.com/s/t1s04qq5hiosdij/300-075_356q_PassLeader.pdf?dl=0).

Please, could someone send me link 358q kerca? Mail jose_ps2 () outlook .com

Thanks so much!

https://www.dropbox.com/s/fcvh6d4c40981po/300-075.pdf?dl=0

Passed 300-075 exam yesterday! Scored 970/1000!

I learned all questions from passleader 300-075 dumps: http://www.passleader.com/300-075.html (PDF and VCE dumps, and free version VCE tools. 100% valid now!)

P.S. Some free PassLeader 300-075 dumps for referring: https://drive.google.com/open?id=0B-ob6L_QjGLpSlBUZHQxc19EWHM

Which 300-075 dump you used? This one from Kerca or?

Kerca, passleaders updated their dump at 12th of Sept. Did u receive any updates? Thanks!

@Wilder,

QUESTION NO: 118 this is no more valid question, it now says:

How many nodes can a phone establish a SCCP connection to at the same time?

C. 1

Check this out:

In an ideal scenario, a SCCP phone keeps a TCP connection established to the primary CUCM and the first backup CUCM. SCCP phone sends keep-alive to all the CUCM to which it has the established a TCP connection. Primary server then responds to the SCCP keep-alive. The time interval is 30 seconds to primary server and 60 seconds to the backup server.

Gents, anyone passed the exam recently?

@test

I just verify the files and is the same, i don’t see any change, is the same number of questions.

Thanks so much kerca!

Joseph, did u pass?

No, I’m studing.
I would like to take the exam next week.

Cheers.

Thank you so much kerca. I will take this exam soon.

Hi Kerca,

Is it possible that you share the 300-080 with me if you have it?

Regards

Gents. I have passed the exam yesterday. All questions came from Kerca’s dump but a couple of them have multiple choices at the real exam and one selection at the dump. My advise to all of you is not to memorize the answers! You can watch CBT nuggets for the old exam which cover around 60% of the topics and to study the official Cisco press book.

Hi sipPbx.
Do you remember the questions that have multiple choice instead of one ? Thx

sipPbx, i have an example with this question:

The intercluster URI call routing no longer allows calls between sites. What is the reason why this
would happen?

A. Wrong SIP domain configured.
B. User is not associated with the device.
C. IP or DNS name resolution issue.
D. No SIP route patterns for cisco.lab exist.

On the 355q PDF, it’s C
And on the 168q vce (by manicsheep), it’s C and D !

DO you agree ? I think the 168q vce is better to learn.

Anonymous is me (mapodres). sry

Hi sipPbx.

Share your experience from exams with us.

Cheers.

@Mapodres, noppe this one was with one selection – C. The one I remember is:

Which statement is true when considering a Cisco VoIP environment for regional configuration?

A. G.711 requires 128K of bandwidth per call
B. G.728 requires 24K of bandwidth per call
C. The default codec does not matter if you have defined a hardware MTP in your CUCM environment
D. To deploy a Cisco H.323 GK, you must configure MTP

In the dump it’s only B. In the real exam is choose two – I selected B and C.

The truth is that I think 356Q from Kerca is enough to pass ;).

Hi sipPbx.

Congratulations on passing the exam,

I think that this forum helped a lot to you to pass exam,and to deserves to share more information about the exam (Do you remember the questions that have multiple choice instead of one)

Thank you

Hi all,
Just passed this exam . I agree with sipPBX, 356Q from Kerca is enough to beat this monster. Good luck guys.

@Bart, I really do not memorized all of the questions! As I said – 356Q&A from Kerca is enough to pass!

I noticed that there are a lot of questions begin with the sentence :
“There are two call control system in this item : ………. follow by screenshot”

There are labs in the real exam or just Questions – Multiple answers ?

thx.

There are no labs.

Hi SipPbx,

Can you share some of the questions you encountered on the exam, using the 356q/358q as reference? no need to list all, just those that you can remember. Thanks in advance!

Passed, there is a new version of dumps.
The 213Q is the valid one. Found it on Ebay http://www.ebay.com/itm/Latest-Question-and-Answers-for-the-300-075-CIPTV2-Certification-Exam-PDF-/272376504874?

This one from Kerca is enough to pass! Stop paying! Kerca was so friendly to share the dump with all of us!

Passed 300-075 recently!

Just mainly learned PassLeader 300-075 dumps (356q), PL dumps still 100% valid now!

p.s.

PassLeader 300-075 dumps for free: https://drive.google.com/open?id=0B-ob6L_QjGLpSlBUZHQxc19EWHM

Hello Jorene could you share the 356Q?

anyone who recently passed this exam? Jorene i think is just a troll from Passleader.

Yep all of those guys are trolls! Look at their messages – the same! As I told you a couple of times – just use Kerca’s version and you will pass the exam! It’s enough!

Hi sipPbx,

Did you encounter the question below? can you remember how many answers were required?

An engineer is configuring URI calling within the same cluster.

Which two actions must be taken to accomplish this configuration? (Choose two.)

A. Configure SIP route patterns.
B. Configure the directory URI partition and calling search space.
C. Associate the directory URIs to directory numbers.
D. Activate the URI service in Cisco Unified Serviceability.
E. Configure SIP trunk.
F. Assign directory URIs to users.
G. Configure the SIP profile.
H. Configure the URI service parameters.

Yep, two answers (the same as in the dump). In the real exam the choices are reduced to 4 or 5 but the same correct answers.

Hi
I would like to know if its enough to learn the 168q vce by manicsheep to pass or if its mandatory to learn the more 188 new questions that are available in the 356q pdf ?

Thx for your answer.

Nope, its not enough! A lot of wrong answers! Just STUDY! Not memorize all of the questions and answers! My advise is to go with 356Q from Kerca!

Could anyone share the Kerca exams?

send me at albertojj AT gmail DOT com

thanks sippbx! how about this question, did you encounter it as well?

Which 2 functions can be implemented without MTP resources?

A. dtmf inband rfc 2833

B. terminating a media stream that uses the same codec

C. music on hold

D. SIP early offer

E. ipv6 to ipv4 transform

Do some research on the forum before asking… we are not here for a babysitting

just to be clear, I was mentioning to those guys requesting the dump… with the email address

@pakganer, yep..the same as into the dump. One note – sip delay offer ;).

@sippbx, did you answer multicast moh and sip delay offer?

Hello Everydody. Yesterday give my exam and I Pass 🙂 with 9XX
A little comments both dumps are valid in 80 % the rest of the exam was for my experience.
remember that this test is passed with 860 points and only 8 questions can fail.

Best Regards

Hi Carlos,

Are there any new questions on your exam? Can you site some examples? Those you can remember?

Hi Carlos

Why is not valid 20%, are new questions or the answers are diferent?

Regards

Hi Kerca,

Yes in my case approximately the 20% of questions was new. I didn´t see in any dump.

On the other hand, I got a file p4s 161q and some answers differ from Kerca File.