Share your CIPT2 v8.0 Experience

Guys
I really think the itlibraries dump is valid .

U can check the reviews

https://www.itlibraries.com/product/300-075-3/

@Ter

Can u share the dump please ?

@Max

Most of it is valid but of the 60 questions about 15-20 are new questions just enough to fail.

Sad since of all the dumps I study didn’t see any of the new questions.

@a6green

thanks, you are doing a great job by keeping us updated!!!will try to do the same

hi gays , any update ??

toa6green
Do you use PassLeader356Q Dump? When is it updated?

Two characteristic of Saclable Overlaping Numering Plan – correct answer are:
A. Internal extensions should not start with the intersite prefix
B. allows a decentralized approach

1. Why should video and audio dscp values be 34
-To preserve lip-sync between the audio and video channels
– To provide separate classes for audio-only calls and video calls.

1. security of sip trunk between VCS and CUCM, the question was like In what CUCM trust store should be load VCS certificate answer is: , Callmanger trust NOT Tomcat trust

thanks @JC

@JC , did you pass the exam yesturday?

@Trust48

I have then PassLeader356Q Dump but last update was August 1, 2016 sent them emails but no reply.

is there any one passed the exam last week

toa6green
Have 356Q Dump updated in Feb2017. But also 356Q! Dont changes? Or may be add/delete some number Q?

@JC thank you! Any more answers let us know. This really helps.

@Trust48

new questions something like implement remote fail-over two guidelines you should observe

a: cucm device pools allow
b:backup over WAN not wanted with SRST router

I think those are the correct answers

see if your dump has it

hi @a6green

please could you send me the 356Q Dump updated in Feb2017 {email not allowed}

thanks in advance

achio_moha

hotmail.com

2Mohamed
send you, see mail.

@trust48 can you upload it to 4shared and post a link plz ?

thanks a lot @trust48 ,

@Lamp i will do

@trust48 you don’t mind if i share it ? 🙂

tomohamed
no problem. think its not last.
Anybody test CIPT2 soon? Need feadback about dumps.

@mohamed and @Trust48 really appreciate it !

https://www.4shared.com/office/wAsZ5UEOei/300-0750.html
pdf version

bellow my resume note for the new questions

messages does a Cisco VCS use to monitor the Presence status of endpoints?
registration, de-registration, in-call or call-ended

steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones

. configure an SRST reference
. Configure the SIP registrar
. Configure voice register pool

URI Dialing within the same cluster, follow these steps:
Step 1: Configure the URIs to the users
Step 2: Associate the directory URIs to directory numbers
Step 3: Assign the default directory URI (Configure the directory URI partition and calling search space)
Step 4: Configure the SIP profile in your network.

-Setup trunk on vcs for cucm
add cucm in neighbor zone
Config trans to conv DN to SIP domains
Conf search rules

-Multi cluster with ILS, Global dial plan replication. Had added dial patterns for UK and japan with +44 and +4444332211,
users report long time waiting for int. Call dial. One of the options was mark the e.164 learned long patterns as urgent priority

–

-partial number match: I think the correct answer would be: +4403812345678
base on 12 digits are the minimum match.

-Transfer call: I think the correct answer would be: Mobile Soft key-

– Two characteristic of Saclable Overlaping Numering Plan – correct answer are:

A. Internal extensions should not start with the intersite prefix
B. allows a decentralized approach

-SRST : Conference, Hunt group and Paging

– What service allows 1 button to pick up in-progress call on mobile.

Mobile Connect

– Cannot dial 911 on mobile. What is the problem.

CSS or Partition Mobile Connect

-two Features for Saclable Overlaping Numering Plan.

Some of options, any digits, no begin with site prefix, different digits length and other two option tahta don’t remember.

– new questions something like implement remote fail-over two guidelines you should observe

a: cucm device pools allow
b:backup over WAN not wanted with SRST router

– How to provision vcs for MRA select 3 options (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2), 3rd Edition page 366)

Conf VCS for CUCM
Conf DNS
Discover CUCM and IM&P

– What 2 zones in VCS that cannot be configured :

Default Subzone
Traversal Subzone

– What are the 3 zone types in VCS:

valide Zone in VCS:
Traversal Zone
DNS zone
neigbor zone

6. Which four of the following are valid Cisco VCS zone types? (Choose four.)
a. Traversal subzone
b. Transformation subzone
c. Local zone
d. Default subzone
e. Transformation subzone
f. Subzone

The answer is listed as :
6. A, C, D, and F

– Uri dialing doesn´t work , check the sip profile, there were a scream capture with the paraemeter .
I chose Use Fully Qualified Domain Name in SIP Requests.

3- What services does e-srst provide.

Line Label
Ad-hoc Software Conference
Shared Line
Headset Answer
Hold/Resume
Call-forward no-answer,
call-forward all
call-forward busy
Time-of-day routing
After-hours
Call pickup and group pickup
Call routing restrictions (local and long distance, and time of day)
Class of restrictions
Dial Plan
Hunt groups
Phones and extensions (speed dials, lines, softkeys)
Pick-up groups
SNR

-E-SRST Limitations

• E-SRST requires Cisco Unified Communications Manager Express Release 8.6 and later.
• E-SRST does not support secure Cisco Unified SRST.
• E-SRST does not support special characters such as @, !, +
• COR lists can be applied to a maximum of 4 DNs on a SIP phone (voice register pool).

-Other question about security of sip trunk between VCS and CUCM, the question was like In what CUCM trust store shoul be load VCS certificate
The options wereTVS trust, Tomcat trust, Callmanger trust, ipsec trust

answer: =========CUCM trust based

-CUCM Express in SRST mode, how many multicast music on hols streams can be utilized by the system at any gicen time:
Answer 6

– What QoS value for endpoint ( Ex60, Sx20, video phones, E20) register in VCS for layer 3 DSCP
Option were, CS3(24), EF(46), AF41(34), CS4(32), I chose AF41(34)

1. Why should video and audio dscp values be 34

-To preserve lip-sync between the audio and video channels
– To provide separate classes for audio-only calls and video calls

. A globalized dial plan, 3 ways enabling ingress gateways to process calls.

Configure the called-party transformation settings for incoming calls on H.323 gateways.
Configure translation patterns in the partitions used by the gateway calling search space
Configure the gateway with prefix digits to add necessary country and region codes.

here te hVCE dump

https://www.4shared.com/file/5TjsfxwRei/300-075ok.html

@mohamed thx does that VCE work for you ? It crashes my player

Also I think its the same dump as before… same questions same version number 🙁

toMohamed
> – What 2 zones in VCS that cannot be configured :
>Default Subzone
> Traversal Subzone
>
think Default Subzone, Local Zone

>3- What services does e-srst provide.
How many options should choosed?

Where are the info about new questions?
Are you passed test?

toLamp,
yes, think its same that I send.
But some Q from mohamed hasnt there

>-SRST : Conference, Hunt group and Paging
SRST dont support Paging
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmepage.html

I passed today 94X. Dump + the additional questions here. There were one or two new ones, but this is more than enough to pass. Cover dumps and research answers for these 16 or so new ones. Don’t stress, this exam is easy.

2jj
send to:
trust_48 @ hotmail.com
or give link plz.

Thnks! What dump did you use?

use the ones shared in this thread. all info is from here.

@jj can you chime in on the questions and answers ? Are the answers we have correct ? Is 16 the right amount ?

hi a friend of me was passed the exam last week

What 2 zones in VCS that cannot be configured :

the Local Zone contains the subzones so it contains the default : Default Subzone &Traversal Subzone

>3- What services does e-srst provide.
i think 3 options

@Lamp yes it works , i used the ARC pluging for google chrome

I can confirm this dump is same as PLeader https://www.itlibraries.com/downloads/300-075-2/. I seen it. Don’t waste money. Currently there aren’t any dumps out there that have new questions

I can confirm this dump https://www.itlibraries.com/downloads/300-075-2/ is same as PLeader I seen it. Don’t waste money. Currently there aren’t any dumps out there that have new questions

in SRND 9/10/11 following e-SRST features are mentioned, so I also think that paging belongs to triple in solutions:

“Enhanced SRST

Enhanced SRST provides more call processing features for the IP phones than are available with the SRST feature on a router. In addition to the SRST features such as call preservation, auto-provisioning, and failover, Enhanced SRST also provides most of the Unified CME telephony features for phones, including:

Paging
Conferencing
Hunt groups
Basic automatic call distribution (B-ACD)
Call park, call pickup, call pickup groups
Overlay-DN, softkey templates
Cisco IP Communicator
Cisco Jabber Clients
Cisco Unified Video Advantage
Endpoint video calls”

Regarding 11 in thread list, I would say it is the concatenation of the shared line with the RDPs’ CSS that doesn’t allow the call to be made via MVA. The rerouting CSS of the RDP is used for Mobile Connect (SNR), when the remote destinations are called.

Regarding 8 in thread I would say that the two nonconfigurable Zones are Default Subzone and Traversal Subzone. There are parameters which can be configured for the local zone.

…….. I’d like to that, if there is cluster subzone as an option then this also could be an answer, I think, ’cause it is also not configurable.

examdumpIf you want to pass 300-075 exam in first attempt ?
Now is possible
You can download 300-075 Braindumps just one click.
From here!
https://www.realexamdumps.us/cisco/300-075-braindumps.html
Don’t waste time and money

examdump@Adney, did you pass 300-075 with https://www.realexamdumps.us/cisco/300-075-braindumps.html?

toDongLee
Hi
can you post new Q?
Thanks!

Passed today 5/15/2017 with 906 score. One new question like:

An engineer implemented a VCS as a gateway to allow SIP and H323 endpoints to rregister, what recommended protocol or gateway should be used. (My answer was h323 gateway)

A. SIP trunk gatekeeper
B. H323 gateway
C. Can’t remember
D. Can’t remember

All the new questions mentioned here were on my exam. I think there is another new question about “VCS and cucm setup”, i will try to remember it. I used out dated passleader and questions here

– How to provision vcs for MRA select 3 options (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2), 3rd Edition page 366). the answers are long not just few words.
Configure VCS nergibor zone to ….. for CUCM
Configure DNS and NTP
Discover search rule…….CUCM and IM&P

implement remote fail-over two guidelines you should observe

a: if publisher backup over WAN is not wanted, E-SRST……..(can’t remember the rest)
B. if subscriberbackup over WAN is not wanted, SRST….(can’t remember the rest)
c. something ……cucm device pools allow……bla bla bla…(can’t remember).
d. bla…bla…bla..
e. bla…bla…bla..

Passleader still contains 60-70% of real exam questions. If you learned all new questions that posted here and know passleader well. You should be able to pass 300-075.

All the new questions on cisco 300-075 have a long answer. I think Cisco doing it intentionally so the people unable to memorize them after they took the exam. Good Luck to all. If i can remember more i will post it here. Best of Luck all!

another one is like, Japan user report that when calling US, there is a 15 second delay…bla…bla…bla…, what setting needed to be change mitigate this…

4 choices, i selected T302 timeout one.

Almost all QoS related question in passleader were on 300-075. So memorize telepresence default QoS value, Standard QoS value for PHB, Layer 3 QoS value, etc… Memorize QoS questions really good. You will encounter 2 to 3 question on cisco 300-075.

for all of you dumps fanatics.
Can confirm that the ones from https://www.itlibraries.com/ + the questions in the comments are 100% valid!

Hello @JC congratulations !

For this questions:

implement remote fail-over two guidelines you should observe

a: if publisher backup over WAN is not wanted, E-SRST……..(can’t remember the rest)
B. if subscriberbackup over WAN is not wanted, SRST….(can’t remember the rest)
c. something ……cucm device pools allow……bla bla bla…(can’t remember).
d. bla…bla…bla..
e. bla…bla…bla..

What were your answers ?Trying to find this in the guide to no avail.

Found this:

When implementing the remote failover model, observe all guidelines for the local failover model (see Local Failover Deployment Model), with the following modifications:

Configure each site to contain at least one primary Unified CM subscriber and an optional backup subscriber as desired. If a backup subscriber over the IP WAN is not desired, a Survivable Remote Site Telephony (SRST) router may be used as a backup call processing agent.
You may configure Unified CM groups and device pools to allow devices to register with servers over the WAN as a second or third choice.
Signaling or call control traffic requires bandwidth when devices are registered across the WAN with a remote Unified CM server in the same cluster. This bandwidth might be more than the ICCS traffic and should be calculated using the bandwidth provisioning calculations for signaling, as described in Bandwidth Provisioning.

Lamp, my answers were A. if publisher backup…. and C. Something…. Cucm device pools alloww..

Lamp i think the question is very closed to what you found:

1. When implementing the remote failover model, observe all guidelines for the local failover model (see Local Failover Deployment Model), with the following modifications:

Selection are like below.

A. A backup Publisher over the IP WAN is not wanted, E-SRST router may be used as a backup call processing agent.
B. If a backup subscriber over the IP WAN is not wanted, SRST router may be used as a backup call processing agent.
C. You may configure Unified CM groups and device pools to allow devices to register with servers over the WAN as a second or third choice.
D. Signaling or call control traffic requires bandwidth when devices are registered across the WAN with a remote Unified CM server in the same cluster.
E. This bandwidth might be more than the ICCS traffic and should be calculated using the bandwidth provisioning calculations for signaling, as described in Bandwidth Provisioning.

https://www.itlibraries.com/ is same as PLeader. don’t wast any money on it. Learn PLeader well and the questions mentioned here, you will pass the actual test. the 300-075 test is not that difficult.

@JC Thank you.

just came back from the test passed 91+, a lot of questions that are not on the dumps, I would say out of 60, 30 are new. But if you understand the material it should not be very complicated. Study QOS, VCS, mobile connect and URI.

For the zones questions, its not which zones can be edited, its which zones automatically get credited with out editing, I choose Local and Default

toLamp
no editable are Local Zone and Defayult Zone, right?
In your answer.

@trust48

The question was not about editable, the question was about automatically created zones, I went with Local and Default.

The question:1. When implementing the remote failover model, observe all guidelines for the local failover model (see Local Failover Deployment Model).

I think its this 2 answers, I had this question.

B. If a backup subscriber over the IP WAN is not wanted, SRST router may be used as a backup call processing agent.
C. You may configure Unified CM groups and device pools to allow devices to register with servers over the WAN as a second or third choice.

I think Lamp is right. I got it wrong. it should be “If a backup subscriber…. NOT the one with “a backup with Publisher….

@JC & Lamp , Congratulations to both of you.

Can you guys please do us a favor ? It would be a great help if you guys can compile all the new questions with answers in one file and Post it here .

Jango, if you look through previous posts they all there

Hi

Can anyone please share any Foundation Learning Guide or Study Guide?

Thank You

hi all can some one please share the latest valid dumps and where are the questions that need to be studied ?

JK please don’t spam

why certcollection is down ?

Pass today 981.
1 qanswer wrong.
Many thanks mohamed for summary of new question.
Additionally near 5 Q was absolutely new for me, but they not hard.
So all dumps have near ~80%, 15% in this forum and certcollection discussed, 5% – new, but not hard.
Good Luck people! )

trust48 well done!!!…

Can you remember any of the new questions. Also do you have like to certcollection?

I meant do you have a link to certcollection page that you are reffering to

http://certcollection.org
but it is “Internal Error 500” already some days
I remember only about T302 timers…
But it very simple.

Passed today with 9XX score.

47q

D&D: CDP/LLDP, PVST/RSTP/MST, Root Guard/Loop Guard, PortFast/BPUGuard/BPDUFilter
Labs: LACP with STP, AAA, Ferries Plastics

I got one question not mentioned here about lacp port-priority.

Sorry guys,

Disregard my previous post.
That was related to CCNP SWITCH.

Guys are there any labs or drag and drop questions in this exam?

trust48…

since certcollection seems to be down… can you share any of the question discussed there?

Passed today,
Only valid dumps are the 384q from itlibraries, had a few new questions but totally passable.
Dumps can be found here https://twitter.com/premiumdumps1/status/868902448689291264

Sergiu, could you share the new questions found in the dump? Thanks !!

@Segiu can u share the dump here plz ?

Hi guys,
Anyone has the 300-080 dump ? Can you please share to andre.salgueiro @ gmail. com
thanks!

Some one can share the last dumps please.

Thanks.

certcollection is working again

can you please share the latest valid dumps

Passed today 02/06/2017 with 9xx score.

~70% questions in dump, 20% in this forum and certcollection, 10% new question.

I remenber this new question:
-Standar Layer 3 DSCP fo voice packet: my answer EF (DSCP 46)

New DUMPS Update, My student passed today. Latest 100% VALID CCNA CCNP Collaboration Exam Questions Dumps at below page including all labs in Packet Tracer format. Working VCE player also included in package.

Download at below page:
http://rebrand.ly/ccnacc7d5

I Also pass today 70% from Dump the other from hear and certcollection also I had a question about which default sub zones are created on install on vcs deafult and transversal
and a 12 digit partial match golobalize number question I chose the +44 number that was 12 digits long
For qos just remember telepresence is 32 cucm video is 34 and cucm voice is 46 as you would with your customers when explaining qos

Hey, I pass exam 02.06… PassLeader Dump and questions write here. QoS for audio, video, telepresence and signaling; VCS – zone, subzones; relationship with CUCM, MRA; Remote failover deployment; T302; Remote destination and Mobile Connect…

Good lucks!

i cleared 300-075 with 75q file. premdev is valid

aamir- where did you get premdev file please?

wooow sounds good , where you get premdev?

Congratulations Aamir, can you share or send the premdev 75q?

Congratulations Aamir

Im failed today , 60% new questions more VCS qos

The PL not valid , please find the new one Good luck!

Passed today with 9XX

Passleader 60% valid, 10% questions from dumps and this forum has been twisted, 20% from this forum and 10% new questions.

========================================================
A user reports that when using desk phone A at theoffice HQ a call can be extended to a cellphone, but when the deskphone B is used at another office branch the call cannot be executed. Which CUCM configuration item causes the issue?

– Mobility Softkey
-Extension Mobility
-Physical Location
-Device Mobility
======================================================
Which 3 options are cisco VCS zone types?

X-Traversal Client
-SIP
-gatekeeper
X-neighbor
-H323
X-DNS
=======================================================
When Configuring a secure sip trunk to which CUCM Trust store must you upload the Cisco VCS certificate?

-ipsec trust
X-callmanager trust
-tomcat trust
-TVS trust
==========================================================