Share your CIPT2 v8.0 Experience

Hi! All!

I just noticed that PassLeader updated its 300-075 dumps from 391q to 423q~~~

http://bit.ly/latest-passleader-300-075-dumps

(423q~~~NEW VERSION DUMPS!!!)

(p.s. Copy the upper short link and open it in your browser.)

Good Luck!!!

Hello guys,

I have passed the exam yesterday and it was similar to the intruder dump. The intruder is enough to pass although couple of new questions which have been already mentioned here.

Best of Luck.

The DSCP for TP endpoints should be CS4 I. E. 32

Passed yesterday with Spotodumps. 88Questions. 1 new question. Other all in the dump.

Register @ http://ccnpcollabcisco.forumprofi.de/ and get the dumps.

@adrian
Can you share your E mail id. Want to buy spo dump from you

Hey shakil. Register @forum. There you can buy the dump.

One of those new questions above makes no scense to me. Can anyone take a crack at it, here are the programing steps dirrectly from Cisco, followed by what I think might be the correct answer. Correct me if I am wrong, PLEASE!

How to configure SIP trunk from CUCM to VCS for TLS (I took 1-5 from Cisco PDF).
1 Ensuring certificate trust between Unified CM and VCS
2 Setting the Cluster Security Mode of the Unified CM to 1 (Mixed Mode)
3 Configuring a SIP trunk security profile on Unified CM
4 Updating the Unified CM trunk to VCS to use TLS
5 Updating the VCS neighbor zone to Unified CM to use TLS

Which three steps are required to configure a SIP trunk on Cisco VCS towards cisco unified communications manager? (Choose three.)
A. Configure a neighbor zone that contains the Cisco Unified Communications Manager.
B. Configure a route pattern zone that contains the Cisco Unified Communications Manager.
C. Configure a transform that converts numbers to appropriate domains.
D. Configure a SIP trunk with Cisco Unified Communications Manager destination IP addresses.
E. Configure a search rule to route calls to the Cisco Unified Communications Manager neighbor zone.
F. Configure a SIP trunk security profile.

Answer: ACE (I think it is A, D, F)

Hi Me,

Unless I’m missing something, I would say that it’s:
A. Configure a neighbor zone that contains the Cisco Unified Communications Manager.
C. Configure a transform that converts numbers to appropriate domains.
E. Configure a search rule to route calls to the Cisco Unified Communications Manager neighbor zone.

The reason is:
B. There is no such this as a route pattern zone in VCS.
D. Within VCS, you actually don’t configure a SIP trunk – all you really need for inbound call routing is a neighbor zone. You can however create a SIP trunk in CUCM and point it to VCS.
F. SIP Trunk security profiles exist in CUCM only – as I said in B, you only need a neighbor zone that points to CUCM.

Hi,

Anyone use the lead2pass dump? I was thinking of picking up a copy I have to pass very soon and I don’t have time to figure out whats up app and all that suff ( old man that I am)…

Thanks and good luck to you all.

@goingtopass – Look for the links to the intruder dump on page 28, everything you need it there. The dump, the player, and the plug in.

HI, I just looked at the links in page 28 and they all pointto gogle drive links that take you to some whats up app…. or a site that has spyware and gets blocked….. looks like no one uses drop box these days.

Anyone try lead2pass before? I only ask because if I have to pay I want to know if it is good before I do….

If you give me somewhere to upload it to, then I can provide it. I have a dump that I modified with the questions from this forum as well, however, it’s also for an old version of VCE.

@goingtopass – My main advice would be… Read the cisco book in its entirety, watch Kevin Wallace training, watch INE training, and practice. All the info I mentioned is on tab 28, I just looked myself. The Intruder dump, a link to the A++VCE+Silver-Full app to play the dump, and directions. Study that, and the questions on the last 8-pages and you will pass.

Dont buy lead2pass, if you just want a dump outside of what I mentioned, IT Libreries just updated their dump. However, it is like 500 questions!

Hi, for some reason when I try those links on page 28 they do not work from me. I have seen the kevin Wallace videos on line and have read the Cisco Press book. so those are great points, thank you. I agree I don’t have time to learn 500 Qs. I just don’t want to go to this thing after reading all the books and fail because of a odd trick question.

@elsewyr you can send to mybox1900 at yahoo dot com if you have time.

@Ahmad Al-Eisa

Thanks for sharing the latest 300-075 questions from PassLeader 300-075 dumps!!!

I took the 300-075 exam yesterday (29/Mar), and luckily passed with a good score.

Most of new questions were from that full version PassLeader 300-075 dumps (423q version), but some answers are not 100% correct.

All in all, new questions are indeed available in PL 300-075 dumps, which helped me a lot for passing.

Thanks!

p.s.

I noticed that PL also updated its 300-080 dumps with 277q now (the former version is 248q), do you have that PL 300-080 dumps, please kindly sharing, thankssssss!!!

I just found a few answers in this document.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/callpros.html

update ccnp dumps
http://www.dumpspro.com/ccnp_dumps.php

@Antti Eronen

Congratulations!!!

Please kindly share that premium PassLeader 300-075 dumps with me here~~~asefchaudhry at outlook dot com.

Thanks a lot!!!

please share any dumps with me here mybox1900 at yahoo dot com

Please share that new PassLeader 300-075/300-080 dumps with me here marcuslam at bluewin dot ch

Thanks all!!!

Is there anyone use SpotoDump for CIPTV2 300-075 Exam ?

I just paid for the spoto bump from the two guys talking about it on this page. It seems to have better answers than the Lead2Pass I also ordered. Also the list of questions on this page posted by pelno seem to have the same answers from spoto.

the only bad part about spoto is that it is not a vce. I do better using the vce and not a pdf to learn the correct answers. I will post again after I take the test in a week.

good luck.

interesting, I just found that the Spoto dump differs from what Pelno posted above for this question. seems like a Cisco trick question and I don’t know what is the correct answer.

which component provides a list of cucm node addresses for phones to register?
– dhcp option 150 – dchp 66
-DNS option 150
– config file from tftp server
– primary cucm node from config file or other nodes during registration.

Pelno says dhcp option 150
Spoto says config file from tftp server

both are correct in a way. option 150 points to the tftp but the tftp provides the config file that will have the CUCM group with the servers listed for registration. what is cisco looking for?

Hi Friends,
Good Day Gentlemen,

Ok, I downloaded the Cisco book for 300-075 reading deeply but I need your help for preparation the exam if any one please could send me the intruder dump or (PL391q) it will be highly appreciated.

my email: (eng-fadi) at Hotmail dot com

Friends always help each other,,,,,,,, I think this is beauty

Thank you

@Goingtopass. on maaaaaan, you didn’t take my advice… Pelno & Spoto are SPAM, there is a lot of it on this site. You can tell the difference bc SPAM will not reply. Either way, my advice is above still. If you cannot figure out how to download and setup the INTRUDER dump (I validated the links, they work), then I recommend picking up IT Libreries or PassLeader. Both were updated in the last month. Honestly, unless you know CUCM in and out, you run a big risk with the material you snagged. If you can pass with Pelno & Spoto, then let us know. As of now, INTRUDER is the only real validated material known to date. It is a collection of the new questions here, and PL.

Anyone kindly share the latest PassLeader 300-075 dumps please!!!

leanneogden at gmail dot com

Thanks all!!!

gre tunnel 09 at gmail dot com
Please share latest dumps

can you send me the intruder please?

I tried those links and they just want to sell me dumps.

Same issue for me, those links on page 28 want to sell stuff. If someone has the dumps please post and I will contact you.

I have the intruder dumps that I have modified with the questions from the forum. If you have a place for me to UPLOAD the dumps anonymously, post it here and I will do so. I will not be sending any emails.

@Elsewyr

Please upload it to http://www.zippyshare.com/ (should be free and anonymous). I will sit for the exam tomorrow, so I would highly appreciate if I get your dump asap! thanks so much!

@ Goingtohelp I am not spam dude. Check previous pages and you will see many of my comments. I even shared this intruder with multiple people through email. I have posted what I have collected from this forum and that’s it (which is essentially same thing Intruder did, which you would know if you actually read a bit of this forum), but whatever, do as you please.

i have spoto dump 88q is totally valid i passes with 960 last sunday if anyone need to buy the dump its only for 10$ send me on my paypal account {email not allowed}

mohamed {email not allowed} no spaces

mohamed . elraie77@ gmail

@pelno, my bad… you are NOT spam lol… and I agree, what you are posting (intruder) is the best. Or at least that is what everyone here has confirmed that took the exam.

So is the SPOTO dump site legit? 88q seems like a limited amount of questions for a 55-60q exam. Can anyone else confirm this.

Guys,

I now other are trying to be helpful and so am I here is what I have…

The spoto and it looks good. I am reviewing it now. I will take the test by the end of the week. I will reply then. Someone else just messaged me on the other forum and pointed me to the link that works….

And here is link for INTRUDER .vce file in case someone needs it:
https://drive.google.com/open?id=1mb3FgCBGoURc_X3AKpf7WKiLUsCvcXOV

@goingtopass, just sent you an emai… Im going to share a boatload of stuff with you.

@goingtohelp, thanks. I am running out of time so I don’t know if I will be able to look at it all. I just replied to you. good luck.

Spoto is valid. We passed. 88Q. All questions in the dump from Spoto.

Hey guys, I haven’t been on this page for a week or so, this Spoto dump is a new thing for me, can you share it with us ( or with me here : abusher1337 at gmail dot com), I would like to see if there are any new questions compared to PL391 or INTRUDER dump.
Would be grateful, and I can share it on my GDrive with everyone here if the dump is worth something.

@abusher check your email and share with others if you feel it is good.

Guys, I see different answers between intruder, spoto and lead2pass ( I don’t have pass leader..) below helped me learn what the real answer is. I can say between spoto and intruder 90% are the same answers. but it is the ones like below that each dump has a wrong answer. so you may need both and have to review all questions to really learn what is correct. Hope I pass soon….

RTMT logs….. time zone is configured….

https://supportforums.cisco.com/t5/collaboration-voice-and-video/acquiring-trace-log-with-unified-cm/ta-p/3153446

QOS…..
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/design/guides/videodg/vidguide/qos.html

Cisco Unified Communications Manager (Unified CM) supports endpoints that mark QoS for their media packets. Voice packets are marked as EF (DSCP value 46), while video devices mark media packets as AF41 (DSCP value 34) and TelePresence endpoints mark their traffic as CS4 (DSCP value 32). All call signaling is marked as CS3 (DSCP value 24).

@Goingtopass

Nice hear that, I also realized that are differente answers between Intruder and PL391.
By the way, could you share this spoto dump? It has just 88q?

@ hopeful, look at some of my other posts….. and yes and yes.

Goingtopass can you share spoto with me please? I’m at {email not allowed}

Email is absolutexwa at gmail

@abusher
@Goingtopass

Kindly seniors, to send me the Spoto dump or any valid dump to the bellow email will be highly appreciated

eng-fadi @ Hotmail dot com

one more think if possible how we can download latest version of VCE player?

Thank you 🙂

Okay guys I think I should share Intruder .vce file, VCE player and Spoto dump on one link since it should be easier a bit for yall.(Thanks everyone for sending stuff to me) And btw i found a blog on someone passing CIPTV2 and it contains some “indirect” Q&As, so I will share that as well. Here goes the link:(You can repost the link all you like just don’t send it to my mail(at least not too often))

https://drive.google.com/drive/folders/1BTwaam7oP4Jp0dVmG2ECOMpZPZhQ2HgC?usp=sharing

Forgot to mention, The VCE player is .APK file, so you either install it on your Android Device,
OR you could install Android simulator on PC like BlueStacks or something and Install the VCE Player on the Simulator.
Anyways, enjoy and happy testing!)

# Goingtopass

Are you take the exam and please confirm is spoto dump enough or not ?

passed today with 900. Intruder rocks!!!

guys If anyone has CIPTV2 valid dump Please share at mohamedbakry906 at gmail.com

goingto…… I passed….. :_) Thank God.

@ Goingtopass you deserve the pass exam really your inputs in this page was respected

This like info will clear up a number of exam questions.

○ Audio – EF46
○ Video – AF41/34
○ TelePresence endpoints – CS4 (DSCP value 32)
○ Call signaling – CS3 (DSCP value 24) (Like Starwars C3PO for signaling)

about the EM question i believe the correct ones are:
-A device can adopt a user profile even when no user is logged in
-A device profile has most of the same attributes as a physical device.

cisco doc:
An autogenerated device profile can only be loaded onto a device when there is no user logged in.
Therefore, the answer B (an autogenerated device profiles can be loaded on a device at the same time as a user profile) is wrong. Right?

can anyone share lead2pass or spoto dumps ?

Thanks

Instant Download
Highly recommended dumps at below link:
Passed it with just 3 days preparation.

https://rebrand.ly/ccnacc7d5

Congrats!!!

Passed both 300-070 and 300-075 recently!

There are few new questions in the 300-070, but many new questions in the 300-075.

I mainly learned the PassLeader 300-070 and 300-075 dumps, still valid for passing.

All new questions have been covered in the latest PassLeader 300-075 dumps.

p.s.

PassLeader 300-070 dumps FYI:

http://bit.ly/300-070-dumps-online

(228q~~~NEW VERSION DUMPS!!!)

And,

PassLeader 300-075 dumps FYI:

http://bit.ly/300-075-dumps-online

(423q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those short links and open them in your web browser!!!)]

More:

PassLeader 300-080 dumps FYI:

http://bit.ly/300-080-dumps-online

(277q~~~NEW VERSION DUMPS!!!)

And,

PassLeader 300-085 dumps FYI:

http://bit.ly/300-085-dumps-online

(186q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those short links and open them in your web browser!!!)]

share new ccnp exam question
dumpspro.com/ccnp_dumps.php

Do you guys think these two new Qs are correct?

Where are DSCP values applied to video traffic?
A. DSCP is configured in the device configuration section of Cisco Unified Communications Manager and in the Express ways.
B. The endpoint overrieds the DSCP values configured anywhere else.
C. DSCP can be set only on the video endpoint itself to ensure that the correct value is sent.
D. DSCP is configured under service parameters in Cisco Communications Manager and in the Expressways.
E. DSCP can be configured only in the network with QOS policies.

Answer: C

Which two bandwith management parameters are available during the configuration of CUCM region?
A. Default Audio Call Rate
B. Max Video Call Bit Rate (Includes Audio)
C. Default Video Call Rate
D. Max Audio Bit Rate
E. Max Number of Video Sessions

Answer: B, D

I recently passed, and what I am about to give you is GOLD!!!! All you need is the INTRUDER dump, the new questions below, and 9 questions from SPOTO. I spent endless hrs comparing intruder, spoto, and the questions below from this forum & validating the answers… much of it was overlap. As long as you have intruder and these Qs you only need the following Qs from SPOTO 15, 18, 32, 49, 55, 130, 168, 191. I would post them, but they are screen shots. Seriously, don’t mess with any other questions out of SPOTOC, they dup intruder, and intruder had the correct answers.

Wish everyone the best! Tear up those exams.

CUCM cluster is installed in headcorders only. How can international calls be blocked while national calls are allowed from branch office cisco IP phones during WAN failure.
– Config COR in the SRST router

Opt 1&2 pic. Which opt describes the affect of this config.
– It implements cisco unified CME redundancy

Which type of zone is configured on the Cisco VCS to connect and communicate with Cisco CUCM?
A. Traversal zone
B. Subzone
C. Default zone
D. Zone
E. Neighbor zone
F. No-fly zone

Answer – E

CUCM Express in SRST mode, how many multicast music on hold streams can be utilized by the system at any given time:
A: Six

Which functionality does ILS use to link all hub clusters in an ILS network?
A. Fullmesh
B. Automesh
C. ILS updates
D. multicast

Answer: B

How is the peer address configured when ExpresswayE has only one NIC enabled and is using static NAT mode?
A. Expressway-E DHCP
B. Cisco Unified Communications Manager DHCP
C. Expressway-E FQDN
D. Cisco Unified Communications Manager FQDN

Answer: C

Which option describes the meaning of a call termination cause code of 1 in a Cisco Unified Communications Manager call detail record?
A. normal call clearing
B. resource unavailable, unspecified
C. call rejected
D. unallocated (unassigned) number

Answer: D

Which option is indicated by SDP content in an SIP invite message?
-early offer
-fast start
– early media
Does not incude anything

Answer – A

Tone after dialing a number, the CUCM bandwidth allocation for the location of one of the … they have been exceeded. Which option is true?
a. If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 8k
b. If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 16k
c. If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 16k
If the call is using G.729. Cisco Unified CM subtracts 8k
d. If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 24k

Answer A

Which configuration is required on CUCM, in order to allow routing calls to the URI of the remote cluster user?
a. SIP route pattern for domain * acme.com
b. End user with directory URI {email not allowed}
c. SIP trunk with destination cucm1 cisco.com
d. SIP route pattern for domain * cisco.com

Answer – SIP route pattern

Which two statements about Cisco Unified Mobility are true?
A. Mobile use of Cisco Jabber requires mobility
B. Single number reach is a feature of mobility
C. Mobility must be enabled per user
D. Mobility is enabled by default
E. Mobility is used to support mobile phones in Cisco Unified Communications Manager

Answers: B,C

Your recently implemented call redundancy at a new remote site, and users report that calls are dropped when the remote site supposedly is in SRST. Which two actions must you take to troubleshoot the problem?
A. Restart Cisco Unified Communications Manager services to confirm that the server is working correctly
B. Confirm that the site devices are associated with CUCM group and that four Unified Communications Manager service are available
C. Confirm that the site has an SRST reference that is correctly associated with the Unified Communications Manager group
D. Confirm that a calling search space is assigned to the voice gateway in Unified Communications Manager.
E. Check the Region settings in Unified Communications Manager
F. Confirm that SRST is configured on the voice gateway

Answer: C, F (F only if single question)

g711alaw between two different sites. Which two steps do you need to take to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command

Maybe A&B

Which three steps are required when configuring extension mobility in Cisco Unified Communications Manager? (Choose three.)
A. Create the extension mobility IP Phone Service.
B. Check the Home Cluster checkbox on the End User Configuration page.
C. Check the Enable Extension Mobility checkbox on the Directory Number Configuration page.
D. Unsubscribe all other services from the Cisco IP Phone.
E. Create a user Device Profile.
F. Subscribe the extension mobility IP Phone Service to the user Device Profile.

Answer: AEF

What happens when a user logs in using the Cisco Extension Mobility Service on a device for which the user has no user device profile?
A. The Extension Mobility log in fails.
B. The device takes on the default device profile for its type.
C. The user can log in but does not have access to any features, soft key templates, or button templates.
D. The device uses the first device profile assigned to the user in Cisco Unified Communications Manager.

Answer: B

Device responsible of marking traffic when a cisco phone is connected to switch
+ Core Layer Switch
+ CISCO IP Phone
+ Access Layer Switch
+ Router

Answer – B

Where on CUCM would you configure codec which will be used by default between regions
Service parameters*
Enterprise parameters

Which statement about Enhanced location Based CAC on cucm based voice networks is false?
all clusters need to be aware of the complete topology (or something similar)
clusters learn dynamically the full topology (or something similar)

Cannot dial 911 on mobile. What is the problem.
A: this question was about unified mobility, and he was able to call from phone (device) its self emergency, local and LD
but from mobile using unified mobility, he only can call local, LD but not Emergency
○ my answer was rerouting CSS

Two characteristic of Overlaping Numering Plan
– Internal extensions should not start with the intersite prefix
– allows a decentralized approach

Which code snippet is required for SAF to be initialized?
A. Service Family
B. External-Client
C. router eigrp
D. topology base

Answer: C

When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration?
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.

Answer: B

If you want to delete a SAF-enabled trunk from Cisco Unified Communications Manager Administration, what must you do first?
A. Disassociate the trunk from the CCD advertising service or CCD requesting service.
B. Delete the trunk from the CCD requesting service node.
C. Place the Cisco Unified Communications Manager node in standby mode.
D. Redirect CCD advertising and requesting services to another Cisco Unified Communications Manager.

Answer: A

Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information?
A. location controller
B. route pattern
C. route string
D. URI

Answer: C

Refer to the exhibit. If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two.)
A. The physical locations are not different, so the configuration of the phone is not modified.
B. The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied.
C. The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters.
D. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm.
E. The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming- sensitive settings of the phone.

Answer: BC

How many Cisco Unified Mobility destinations can be configured per user?
A. 1
B. 10
C. 4
D. 6

Answer: B

When configuring Cisco Unified Mobility, which parameter defines the access control for a call that reaches out to a remote destination?
A. Calling Party Transformation Calling Search Space under Remote Destination Profile Information
B. User Local under Remote Destination Profile Information
C. Rerouting Calling Search Space under Remote Destination Profile Information
D. Rerouting Calling Search Space under Remote Destination information
E. Calling Search Space under Phone Configuration

Answer: C

Which three steps are required to configure a SIP trunk on Cisco VCS towards CUCM? (Choose three.)
A. Configure a neighbor zone that contains the CUCM.
B. Configure a route pattern zone that contains the Cisco Unified Communications Manager.
C. Configure a transform that converts numbers to appropriate domains. (DNS)
D. Configure a SIP trunk with Cisco Unified Communications Manager destination IP addresses.
E. Configure a search rule to route calls to the Cisco Unified Communications Manager neighbor zone.
F. Configure a SIP trunk security profile.

Answer: ACE

Which statement about Enhanced Location-based CAC on a Cisco Unified Communications Manager-based voice network is false?
A. Each cluster should be configured with immediate neighboring locations such that the topology of each cluster can interconnect
B. Every cluster that participates in LBM requires the location be locally configured for location to device association.
C. E-LCAC can adjust its knowledge of effective paths due to link failures and reconfigurations.
D. Each cluster requires a complete view of the modeled topology

Answer C

Which situation requires CAC on a Cisco to be open for packets that are sourced from the internet with destination in the corporate DMZ?
A. when you required administrative access to the Cisco Expressway Edge from Internet
B. When you want to enable calls to web applications by using HTTP
C. When you require encrypted calls to endpoints on your corporate LAN
D. When video endpoints that reside on the Internet require administrative access to the Cisco Expressway Edge

Answer: A

Where are DSCP values applied to video traffic?
A. DSCP is configured in the device configuration section of Cisco Unified Communications Manager and in the Express ways.
B. The endpoint overrieds the DSCP values configured anywhere else.
C. DSCP can be set only on the video endpoint itself to ensure that the correct value is sent.
D. DSCP is configured under service parameters in Cisco Communications Manager and in the Expressways.
E. DSCP can be configured only in the network with QOS policies.

Answer: C

Which two bandwith management parameters are available during the configuration of CUCM region?
A. Default Audio Call Rate
B. Max Video Call Bit Rate (Includes Audio)
C. Default Video Call Rate
D. Max Audio Bit Rate
E. Max Number of Video Sessions

Answer: B, D

2018 new update ccnp exam Questions
http://www.dumpspro.com/ccnp_dumps.php

thank you and congrats pay it forward!

g711alaw between two different sites. Which two steps do you need to take to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command

Maybe A&E is what I think

at least, this is what I do in 4k routers… i cant remember if just shutdown is enough with ISR routers

Thanks @Pay it forward for your input!

for this question “Tone after dialing a number, the CUCM bandwidth allocation for the location of one of the……” I believe that the correct answer is D. G.711 80k, G729 and 723 24k.

Hello,
Could somebody share SPOTO dumps here, please.
Thanks a lot

@wanderer,
I am pretty sure this g.711alaw question is either how to setup or about resetting transcoder resource(IOS Router) so it registers with CUCM as a Resource.
based on this link:
https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/91863-trans-conf-iosgw-ccm.html
You reset the transcoder using commands: no dspfarm, no sccp, dspfarm, sccp,
But the document refers to IOS 12.3 and Callmanager 4.3.

Or you could actually do “shutdown, no shutdown” under dspfarm transcoding profile i guess,
@Mitiamen, go to the page 29, I posted a link for all the dumps that i have found(except 391 PL) and SPOTO is included in there. (It is called 591_lab.doc or something)
I don’t want to be rude, but please don’t be lazy and read at least 5-10 last pages of the forum before you ask people to share stuff again.

@Abusher ohh I didn’t understand that it was SPOTO, I downloaded this file. There were so many different answers relatively to intruder dumps. And I think intruder answers are better.

@Mitiamen, whenever there was a difference between spoto and intruder, I ONLY used the intruder answers, and crushed the exam.

@wanderer @Abusher & @collab the g.711 question was one of the few I could not find the proper answer for, but I did get it on my exam. So you might want to read up a little.

Is spotto’s dump with 80 odd questios in word file?

Passed the 300-075 few days ago (13/Apr/2018)!!!

Scored 9xx/1000. There are around 8-10 new questions.

I used PassLeader 300-075 dumps (423q~~~NEW VERSION DUMPS!!!), all new questions are available in PL, valid enough for passing now!!!

And, part of PassLeader 300-075 dumps are available here FYI:

http://bit.ly/300-075-dumps-online

(423q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

@hopeful, CONGRATS!!!!! and you are very welcome. I put A LOT of hours into sifting through the last several pages & cross checking the dumps with the new questions to arrive at the info I provided. I am happy to see someone else reaping the benefits of it.

new update ccna dumps
http://www.dumpspro.com/ccna_dumps.php

@”Pay it Forward” kindly send some dumps ( 300 – 070) questions to thanzi.mphephu@ gmail.com

I’m about to take the exam soon.

thanks in advance

Anyone with PassLeader 300-075 dumps (423q version), please share it at delta3071 at gmail.com

Hello guys, plese share SPOTO dump whit vce player please, to a_ramonpzi at hotmail dot com

Hi everybody,

thank you for the info provided.
@Pay it forward or @hopeful, is it possible to put the following Qs from SPOTO 15, 18, 32, 49, 55, 130, 168, 191 here? I know you did already a lot, but this will help the community more.

Thanks in advance,

thanks for all your efforts in researching – some queries I have are:

Q: A user reports that when using desk phone A at the office HQ a call can be extended to a cellphone, but when the deskphone B is used at another office branch the call cannot be executed. Which CUCM configuration item causes the issue?
– Mobility Softkey (correct)
– Extension Mobility
– Physical Location
– Device Mobility

Why softkey issue if user profile softkey works in HQ ? – answer Device Mobility?

Q: Device responsible of marking traffic when a cisco phone is connected to switch
– Core Layer Switch
– CISCO IP Phone (correct)
– Access Layer Switch
– Router

not sure – phone sends traffic as cos but i thought next device will be access switch and will mark cos traffic to dscp on the uplinks. doe the phone mark or set traffic?! each network device is responsible for proper marking – this Q sucks as not clear!

g711alaw between two different sites. Which two steps do you need to take to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command
Maybe A&B

most sensible is shutdown, then add the codec and no shutdown so A+E
But when adding codec you also need to set the max sessions so none of these are really correct

Latest update CCNA Exam Questions

dumpspro.com/ccna_dumps.php

Hey guys, went over intruder questions and questions supplied by pay it forward and passed comfortably today.

Thanks

I bought the dumps for all four Collaboration exams (300-070, 300-075, 300-080, 300-085) within the last 3 weeks from Spoto and passed all the exams without studying anything, the dumps are all valid and you can pass if you just memorize the answers, it was very easy. If anyone wants them send me an email at {email not allowed}

the email is andydevine05 at g.m.a.i.l (without the periods)

We have the new Spoto dump for 300-075 on http://ccnpcollabcisco.forumprofi.de/.
Its valid.
Register and get the dump.

Passed 9xx
IT-Lirbaries and Intruder dumps are up to date.
Either will get you passed

GL!

Hi, Passed today
I used Intruder dumps and that pay it forward posted. There were 18 new questions.
a question was about keepalives beetwin CUCM and SAF devices
one question about menu where Hosted DN configures
which dscp could be configured in service parameters
At the moment the actuality of the Intruder dums with questions posted by pay it forward is not more than 70%

Hi all,

I passed yesterday with 922, the same happen to me as Mitiamen said.
I also remember there is a drag and drop question about the QoS for voice and video.
and also where you can configure the SIP SRST reference IP add in the CUCM.

It was hard exam, I passed thx god.

Sounds like cisco switch up the exam, which is normal. However, I do wonder if those SPOTO Qs 15, 18, 32, 49, 55, 130, 168, 191 that I didnt post would account for some of the Qs. I know for a fact that when I took the exam a number of the were on it.

Hello Pay it forward

Can u post these SPOTO questions ?
It would be very helpful

ok guys i have collated all the new questions printed by payitforward on this forum and created a vce and pdf files for everyone to access as per their comfort

https://drive.google.com/drive/folders/1GAYQTeQbHVZNkPZj6evqqWEPxf2MuYK2?usp=sharing

Can anyone please clarify the whether the spoto questions are the ones with file name 591_lab?

Dear Son,
thanks for ur effort, plz advise both PDF & VCE has same questions as VCE does not open???

Yes they both have same questions

thanks Son

Passed the 300-075 few days ago (20/Apr/2018)!!!

Scored 9xx/1000. There are around 8-10 new questions.

I used PassLeader 300-075 dumps (423q~~~NEW VERSION DUMPS!!!), all new questions are available in PL, valid enough for passing now!!!

And, part of PassLeader 300-075 dumps are available here FYI:

http://bit.ly/300-075-dumps-online

(423q~~~NEW VERSION DUMPS!!!)

Good Luck!!!