Share your CVoice v8.0 Experience

@Basim, i guess go with dump coz i ahve put the cisco answers and i got less marks, some questions are, i guess not correct,

I am booked to gain my Rich media specialist cert, which involves the Cvoice exam and I have prepared well for that with the Voicetut dump and my study. But as for the Rich media exam (642-481) does anyone know where I can get some help for this, As I can not even find a Cisco press book covering this let alone a dump ???? I held this exam 6 years ago when it was a new cert, and I had problems then as there was nothing to prepare me for the CRMC exam 6 years on and say issue remains…Any help welcome ?

Dear Friends
I have passed the exam yesterday with score 93.6% … nagamin.90q is still valid … Most question from the dump …. Please read the questions very well as they are sometimeschange 1 or more word which may affect the chossen answer … Try to understandthe question before answers …. Here is my notes about the questions:

1) Regarding this confusing question:

Which three of the following methods are used by a Cisco Unified Border Element to provide
network hiding? (Choose three.)
A. back-to-back user agent, replacing all H.323-embedded IP addressing
B. IP network security boundary
C. media flow-through
D. RSVP
E. IP network privacy
F. intelligent IP address translation for call media and RTP flows

I have this question in the exam twice …. can you belive !!!!!! the first version is:

Which three of the following methods are used by a Cisco Unified Border Element to provide
network hiding? (Choose three.)
A. back-to-back user agent, replacing all H.323-embedded IP addressing
B. IP network security boundary
C. media flow-through
D. RSVP
E. IP network privacy
F. intelligent IP address translation for RTP flows

and the second version is

Which three of the following methods are used by a Cisco Unified Border Element to provide
network hiding? (Choose three.)
A. back-to-back user agent, replacing all SIP-embedded IP addressing
B. IP network security boundary
C. media flow-through
D. RSVP
E. IP network privacy
F. intelligent IP address translation for call media and RTP flows

2)Regarding this question:

dial-peer voice 123 pots
destination-pattern 4087071222
direct-inward-dial
port 0/0/0:23

dial-peer voice 2123 pots
answer-address 4087071222
port 0/0/0:23

voice-port 0/0/0:23

I have this question in the exam also twice … one of them is the same as this version while the other as follow (as i remember)

dial-peer voice 123 pots
incoming called-number .

dial-peer voice 2123 pots
answer-address 4087071222
port 0/0/0:23

voice-port 0/0/0:23

I don’t remeber the choices but their are 2 choices that i thought about them:

b)Dial-peer 123, because incoming called-number takes precedence over answer-address
c)Although dial-peer 123 takes precedence, it will not be matched because the command direct inward-dial is missing.

i choose b

3)Regarding to the following question

dial-peer voice 1 pots
destination-pattern 555….
prefix 5
port 0/0/0:23

Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in
the exhibit, which of the following called numbers will be sent to the PSTN?
A. 5551234
B. 1234
C. 555
D. Null
E. 5
F. 51234
Answer: F

I have this question and also have another version from it which is:

Dear all
I click submit by mistake ….. let me continue:

I have this question and also have another version from it which is:

dial-peer voice 1 voip
destination-pattern 555….
session target ipv4:192.1688.1.10

Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in the exhibit, which of the following called numbers will be sent throught voip dialpeer?

A. 5551234
B. 1234
C. 555
D. Null
E. 5
F. 51234

Answer: A

4)Regarding the following question:

Which of the following describes SIP Early Offer?
A. In SIP Early Offer mode, the SDP media capabilities are sent in the INVITE message of the
calling device.
B. SIP Early Offer always uses session indicator 183.
C. In SIP Early Offer mode, the SDP media capabilities are sent in the 200 OK messages of the
calling device.
D. In SIP Early Offer mode, the INVITE and the 200 OK messages use non-SDP message format
to indicate SIP Early Offer

In the dumb, it asking about Early media so the answer is B while in the exam it asks about Early offer so the answer is A

5)Regarding to Q.39 (The drage & drop)

I really don’t have this question in the dump but i think that the right answer is the following

dial-peer voice 1000 voip
destination-pattern 1…
sessiontarget ipv4: 10.1.1.1
!
dial-peer voice 4000 voip
destination-pattern 4….
session protocol SIPv2
session target ipv4:10.1.130.1

because our friend taurus (page 2) cleared CUBE section with 100% and make this anser and also becuase i implement this configuration and worked with me on GNS3 very well

6) Also refer to our friend Cisco in page 3 …. His post is very useful to me

Finally i jsut want to thanks all our friends that share their experiance and best regards for those who will take the exam soon

Best Regards

I have prepared with live training courses, and the official pdf book…..used the 90q and questions Cisco gave on page 3, and understand the concepts….I will be taking the exam tomorrow…I will everyone know how it goes.

Thanks for everything!

Hi,

when i’m studying from this dump i see an error on this question:

Which QoS technology provides a strict priority queuing scheme that allows delay-sensitive data such
as voice to be dequeued and sent before packets in other queues are dequeued, and also works with
WFQ and CBWFQ.
A.header compression
B.IP RTP Priority and Frame Relay IP RTP Priority
C.RSVP
D.low latency queuing
E.FRF.12

Answer from dump is LLQ but i mean that’s B: LLQ doesn’t use WFQ but only CBWFQ unlike IP RTP

Let me know your meaning…

See the correction on page 3 from Cisco.
Confirm my meaning…

passed today with 910/1000. Strongly recomment taking into account all q&a that were published above. Seems I had all of them.

Ahmad,

You stated that you had a question twice with 2 variations and when i looked at them I see no difference..can you or anyone else explain
here is what you put :-
I have this question in the exam twice …. can you belive !!!!!! the first version is:
Which three of the following methods are used by a Cisco Unified Border Element to provide
network hiding? (Choose three.)
A. back-to-back user agent, replacing all H.323-embedded IP addressing
B. IP network security boundary
C. media flow-through
D. RSVP
E. IP network privacy
F. intelligent IP address translation for RTP flows
and the second version is
Which three of the following methods are used by a Cisco Unified Border Element to provide
network hiding? (Choose three.)
A. back-to-back user agent, replacing all SIP-embedded IP addressing
B. IP network security boundary
C. media flow-through
D. RSVP
E. IP network privacy
F. intelligent IP address translation for call media and RTP flows

@ammo:

my meaning is that for two questions answer are: b,e,f

Let me know if anyone think other things..

Thanks Flo
I had that answer also but didnt see any difference in the question…I have my exam on Tuesday so will give feed back.

Can anyone tell me how many drag and drops were in the exam?

Hi Divad, I have not taken it yet but my guess it it will be at least one per section as there are no simulations or testlets.. I would take a stab at 10 D&D but will make on note on Tuesday 🙂

Hi ammo
Their is a difference between the 2 versions …. choice A is the one that make the 2 versions different ….. Note that, In the first version, choice A has H.323 while in the second version, it has SIP

Best Regards

@ammo

The difference is effectively in the 1st answer were SIP replace H323.
So there is 3 answer for question with H323 (B,E,F) and 4 for SIP (A,B,E,F)

Please read this page.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/product_data_sheet09186a00801da698.html

Sincerly yours.

Flo for the the second version of question. it says to pick 3. you are saying which I agree with that (a) is also the right choice, but hat gives a 4 answers ??

@ammo

I think that when he reported the question here he copy-paste question and forget to change the number of answer, or he doesn’t remember exactly the correct sentence.

I downloaded the braindump 90q.vce.. but it is prompting for a password… Please provide the password to open it

I just finished the exam , with 910 points.

The nagamin 90questions still valid plus Cisco’s 16 questions plus 2 more. Thanks guys…

There was a question where They changed the options , the one with the jitter buffer , there was no voice garbled option.

There was question regarding the two sites with same extension numbers , but one DID , I put auto attendant.

Dear Flo
The 2 versions of the question posted here as i have them on the exam .. I don’t forget anything

Best regards

Taking exam in a couple of hours…I will let you know how the use of 90q and cisco press prepared me for exam and taurus page 2 and cisco page 3 of voicetut…

Come on 🙂

Dear all,

I am CCNA (data) which is expireing in this month, Can I give Cvoice 642-437 paper to renew it.

@Sulman

Yes you can… Every exam 642-xxx or 650-xxx recertify CCNA. But if you want to be CCNP Voice certified you must also pass the ICOMM exam to be CCNA Voice.

350 not 650 sorry

@Sridhar

Sorry but there is no pwd for this file… In fact, not for me 😉

good luck ammo

is any body know if there is any voucher to retake the exam ?

Thanks Flo…….

INE CCNP Voice 8.0 Class – 2012

New elearning !!!!!!!!

http://wowebook.net/2012/02/ine-ccnp-voice-8-0-class-2012.html

Download :p
Good Luck

hi guys, thank you for your works . do u know the price for exams CVOICe, CIPT1, CIPT2, TVOICE, capps ? what do u think , i am ccna voice with solid voip experience what give me CCNP voice certificate , how change it my income?
Thank you

@ammo

So… how are your experience`? Not bad i hope…

I’m going to test tomorrow 09:30 AM UTC +1:00
I keep you all in touch when i’m finished.

Best regards

@ biggizod all ccnp exam are $200 each

Hi all.

Finished with mark of 910/1000

All questions from 90q and the new discussed here…

Really 2 questions about CUBE with SIP or H323 in first answer and really 3 choice…. Don’t understand cause with SIP in first answer 4 choice are possible 🙂

So go with CIPT1

Cheers

I’ve forgot: 7 minutes for the exam 🙂

Hi Flo and Guys…I passed with 949, did not get any new questions but did notice that there was some re-wording on questions so make sure you read questions properly. So the combination of Cisco press and 90q was enough.

Well done Flo….

Does anyone know if there are any other sites like this where I can get help for the Cisco rich media 642-481 as my job expects me to obtain my specialist exam ?

also If i want to obtain CCVP what exam do I need to add to my CCNP and CVoice ?

Thanks and good luck to anyone else taking exam and refer to Cisco’s answers on page 3 before you take exam as they will come up.

Ammo

kalid thank you

great ammo…

for ccno voice you must passed the icomm to be CCNA Voice first and after CIPT1 CIPT2 TVOICE and CAPPS…

Good luck for your rich media experience

I am giving Cvoice 642-437 on 19th Feb, Any change in paper,
@Ammo I have 90q but from where i can Cisco press docs….

still valid passed 9xx today

Well I passed the exam with 9xx, same 90q, But I think some answe in the dumps are not correct like;

An access layer switch is configured to extend priority to an IP phone. Cisco Discovery Protocol is
enabled on all ports. What are the three possible ways that an IP phone can be instructed to treat
the Layer 2 CoS priority value of the attached PC? (Choose three.)
A. trusted IEEE 802.1Q
B. configured DSCP level
C. configured CoS level
D. trusted
E. configured IEEE 802.1Q
F. untrusted
In dumps its C,D,F & in Actual test its
Answer: A,C,D

Any one know the correct ans.
Got two version of this question;
dial-peer voice 1 pots
destination-pattern 555….
prefix 5
port 0/0/0:23

Refer to the exhibit. When 5551234 is being matched with the outgoing dial peer that is shown in
the exhibit, which of the following called numbers will be sent to the PSTN?
A. 5551234
B. 1234
C. 555
D. Null
E. 5
F. 51234
Answer: F

If we replace dial-peer voice 1 pots
with
dial-peer voice 1 voip then answer is A.

Also This question;
What is the function of class-based marking?
A. Marking packets is based only on CoS value, IP precedence value or DSCP value allows Layer
3 frames to be identified and distinguished from other packets.
B. Marking frames based only on CoS value or IP precedence value allows Layer 2 frames to be
identified and distinguished from other frames.
C. Marking frames or packets sets information in the Layer 2 and Layer 3 headers of a packet so
that the frame or packet can be identified and distinguished from other frames or packets in the
same traffic flow.
D. Marking frames only sets information in the Layer 2 headers of a frame so that the frame can
be identified and distinguished from other packets or frames.
E. Marking allows network devices to classify a packet or frame, based on a specific traffic
descriptor.

In dumps option E is not there, In actual test the option E is correct ans. In exam also I got the same version;

Which four types of ephone-dns are supported by SCCP in Cisco Unified Communication
Manager Express? (Choose four)
A. single-line
B. dual-line
C. shared-line, nonexclusive
D. two directory numbers with one telephone number
E. dual number
F. octo-line
Answer: A,B,E,F
In Dumps the ans is ABDF which one is correct???

In which situation would the trust boundary be located at the access layer?
A. if the endpoints, both IP phones and PCs, are incapable of marking traffic properly
B. if PCs are switched through an IP phone and the IP phone traffic can be trusted to mark both
traffic streams properly
C. if the access layer switch cannot trust or re-mark incoming traffic from endpoints properly
D. if there are endpoints that cannot be trusted and connect directly to the distribution layer
Dumps its B
whats the corretc ans.

thaks all
I passed 9xx yesterday

@guest77 ! can you give us your input about your exam and if this dump is valid?
how many questions did u have? which exam dump did you use?
Thanks

Passed today with 9xx. The nagamin 90Q dump is still valid. Had 6 or 7 questions not in that dump. There was one new question not mentioned here yet. I don’t know the exact wording but just remember the following and you will answer it correctly:

When running RSVP based CAC, the CUBE routers must use media flow-through. Media flow-around is not supported in this configuration.

Thanks to all for posting here.

Yes ….Still valid .got 9XX..

@logan! or anyone took the exam ! did u use this 90q dump? did you use the same answer in the dump or other? also where is the Cisco’s 16 q at? can someone help please.
Thanks

yes i used 90Q and the questions( all are in exam ) which posted by Aijaz Rehman February 5th, 2012 .also you have to considered Sulman February 20th, 2012 ,Ahmed Sallam February 6th, 2012 ,fsup February 4th, 2012 ,Ahmed Sallam February 10th, 2012 …

Tpye of complexities are 1.Flex(this is a LOW complexity codec) 2.Medium complexity 3.High complxity Codec.

Thanks Logan! my exam is on 3/3, if you have any more input I will appreciated. Thanks again and God Bless.

Hello…! Voicetut

Thank you Voicetut team.

Today, I clear CVoice v8.0 exam with 910/1000.

I use for exam preparation: Voicetut, Exam-collection, Actual Test, CVoice 8.0 Book and Voice bootcamp.

Special Thanks to, Voicetut team; Exam collection and all guys here wrote the Comments.

Hi
somebody help me in getting a full version of virtual cert exam software. i am able get only the trial version. i want to appear for exam by this week. please let me know asap

what your email

@Sulman could you please send me a copy too ? my email is
ninim7@hotmail.com
Also how many questions in the exam? what material did u use?
Thank you much.

Hi
Which codec complexity type will offer the greatest number of voice channels, provided that the
complexity type is compatible with the particular codecs that are in use?
A. low complexity
B. medium complexity
C. high complexity
D. flex complexity

the answer in dump is “A” but in page before this page (page 3) someone post it with answer D

I think the answer will be “Medium Complexity” as per cisco. Becaz the flex complexity can handle mode voice calls but unable to allocate DSP resourses for simultaneous active calls.

Hi I cleared CCNA voice today. need to start with CVOICE.
Are there any simulations in the exam. And how much dumps are valid.

Hello! Is any one have a copy of Prep-king voice dump can share with us please.

Hi all, I passed yesterday 898 – the 90q dump is still good. I also studied questions from our friend Cisco on page 3. Thanks good luck to all.

A big thank you from a cowgirl to Nagamin, guest77, Sulman, logan, and Cisco.

Congratulations masr.
I am taking the exam tomorrow, I have gone throught the 90 questions and all the above posted questions. what do you reckon, any advise or any change. Thanks

Passed the Exam today with 9XX. Some of the answers can be wrong in the dump but it is still good to pass.

Hi all; Is it possible to answer my below question about calculating bandwith measurements?:

How many VoIP G.729 calls can be made simultaneously over a 128-kb/s Frame Relay circuit
(Layer 3) if 50 percent of the circuit is dedicated to voice and 50 percent is dedicated to data?

Thank you very much for your helps.

90q still way valid. and other updated posts here. pass last week
95x, there are differences in the actual answers posed so read
carefully and you will see they are or are not valid

used 90q and p4s, could have save some bucks had i found this site
first and not p4s both still good though.
i thank you all!

Passed today with 949/1000 90Q are still valid
But confused in few questions of drag and drop and multiple select.
In VOIP drag and drop for dial peer match not port option default dial peer must select.

For no of voice calls question

20 Bytes is voice payload
2 Bytes compressed header
8 Bytes for framerelay

BW per call=(Voice payload + L4+ L3+L2)*Packet ratio*8
BW per call=(20+2+8)*50*8=12000=12KB/S
No of call for 64K BW=64/12=5 Calls

Thank you Sajeel for your response. I will take Cvoice exam in two or three weeks. I have almost completed to study. Firstly i have studied all of the chapters in CVOICE book. Now, i will solve the questions which are in the Actualtest and 90Q dumps. But i am not sure, will it be enough to pass exam by solving questions which are in Actualtest and 90q dump. In the real exam, if i know the answer of each question (by studying) in all these documents, can i pass the Cvoice Exam?

Hello Veli

yes, you can pass exam with 90Q dumps and cvoice 8.0 book of Kevin Wallace 4th edition.

FYI
Q: Voice packets are arriving at a destination with a variance of between 20 and 50 ms . if the jitter buffer has a capacity of 30 ms, What is the impact of audio at receiving IP Phone?

In dump Ans: B

But in paper B options wan not there

Hi Sajeel,
So, the only differrence between the real exam and 90Q dump is changing places of the options? And some new questions are also being added to 90Q dump. But i want to know that how many new questions are there in your exam?
Thank you for your help.

Hi Veli

No new questions in my exam, all questions are including in 90Q and 19Q dumps.

Hello Sajeel,

Thank you for sharing your experience. Have a nice day.

Friends need CBT , please help

Yeah, passed last Friday! Thanks to voicetut and the posting community. All the questions from voicetut had been in my test. I prepared with testking, bootcamp, pass4sure and voicetut…

Santa, how accurate was the dump compared to TestKing for CVOICE?

The more I read Q.80, the less it makes sense. Has anyone managed to work out how the answer of 1 call is achieved? (it’s the “Lighthorse Equine Management question”).

Sussed it at last…
T1 link = 1536k
minus 25% = 1152k
minus applications (1025k) = 127k for voice calls

Packet size = (64000 x 0.040) / 8 = 320 Bytes
Total frame size = 40 + 6 + 320 = 366 Bytes
PPS = (64000/320) / 8 = 25
Total Bandwidth for 1 call is 366 x 25 x 8 73200 bits
Ergo -> 1 call on a 127K link. Badda Bing Badda Boom!

Passed with 9xx…USE ACTUALTESTS…Viva the TUT !

@KIM
They have both their mistakes, but often they are quite obvius. Just don’t believe anything they write and compare the explanations… If you have some doubt, use your study guide and check the answers. But even if you take over the mistakes for the exam you could pass…

Hi SkyKid did what version of Actual Tests did you use? Do you have a download link?
Thank you

Hi Santa where all the questions in 90 Q and 19 Q?
Thanks

Passed today with 890. Huge debt of gratitude to Nagamin and all Voicetut contributors. I have to echo Santa’s comments, don’t just memorize answers, understand them, and you will really benefit from this exam.

Passed today with 923. There were no new questions.Thanks to all.

@Packard Dell
i used the 90q from Nagamin and there hab been also a few new questions (i would say 6-7). Also read out this pdf by heart, it helped me much http://www.go4exams.com/EXAMS/642-437.pdf

@Santa,
Thanks for the info, passed 3/15 with 898 using 90Q and 145Q dumps.

Thanks for the info, passed with 898 using 90Q and new dumps.

anybody could you tell me the correct answer of the drag and drop the :

CUCM ———————– GWv ————————-PSTN CO ???????????

ISDN CALL CONTROL///Q931////Q921////TCP

Thanks

90q is valid…total 67 questions…in the exam..Thanks for voicetut

Can any one please send a link for updated Dumps.Your help will be much appreciated
Thanks

passed yesterday with 910 points …. 67 questions …. 90q nagamin + 19q guest77 are still valid

Has anyone got the recent study guides for the new CCNA voice 642-437. Please email me to riewagee@hotmailmail.co.uk

Hi,
Today, I passed 642-437 exam. I got 898 / 1000 score. Above 90q nagamin dumb is still valid. Some of the questions were repeated with slite variations, so you have to read a question carefully. I got some questions from Aijaz Rehman too.
Thanks to voicetut team and all its members.

Passed yesterday. 90q nagamin dump is still valid. There around 5 or so drag and drop questions that i had never seen before. Most of the questions did come from the 90q nagamin dump though. Thanks!

Hi all,

Passed today with 910 points. All you need is 90q nagamin + 19q + and a bit of attention. Also you must carefully examine each comment on this site. There is no different question that have mentioned on this site before. Thanks all to share their experience.

Any one has the link on the latest CBT Nuggets for this track? I back read and all I saw was the one for v6. Thanks!

90q and 19q dumps are still valid..Passed today with 910…3-4 questions were out of the dumps..
Garbled audio option wasn’t there at all.
Also,the CUBE network hiding question was repeated twice exactly as mentioned above..
Thanks to Nagamin, guest 77 and this discussion thread which are enough for getting 900+ marks….

Please can someone email me CVoice 8.0 Tvoice Quick reference Guide : twin00@hotmail.co.uk OR UPLOAD LINK PLEASE!

NEED QUICK REFERENCE GUIDES

642-437 CVOICE v8.0 AND 642-427 TVOICE v8.0

Passed yesterday with 898 … 90q is still valid however had few qustion from outside and also there were few with dif options so read the question carefully.
Thanks for the support from VOICE TUT.

Hi Hari am abt to go for my cvoice next week
plse was there simulation?
Pls reply?

Hi, anyone have Sybex: CVOICE 8.0??? PLEASE!!

You can send at dbs_intelco@hotmail.com or comment link

passed today wid 952…..all q frm 90Q n 19Qdumps…no new questions apart from these two dumps..
as discussed in voicetut…read carefully while answerin d questions as couple of wordings in d options r slightly modified..
@izzy…no simulations in d xam
i wish all b best to d others

Hi Gos,

Please follow the link for the book.
http://libproject.net/network/cisco/implementing-cisco-unified-communications-voice-over-ip-and-qos-cvoice-foundation-learning-guide-ccnp-voice-cvoice-642-437-4th-edition.html

Cleared last week dumps is still valid

Hi,
I have one question in the dumps not clear at all, and dont find the answer in the book, maybe anyone could help me:

– When a CUBE connects two VoIP streams using flow-around media, wich of the following options describes the components of the call that flow around and the components that flow through the device?

1 Call signaling flows through and call media flows around the device
2 Call media flows through and call signaling flows around the device

I think is number 1, but in the 90Q gives the 2…