Share your CAPPS v8.0 Experience

cjc20100 AT yahoo dot c0m

How many questions in Spoto dumps?

Hola, everybody!

The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 516
Which two default SCCP keep-alive intervals are generated from a phone to a Cisco Unified Communications Manager server? (Choose two.)

A. The phone sends a SCCP keep-alive to the backup server every 60 seconds.
B. The phone sends a SCCP keep-alive to the backup server every 30 seconds.
C. The phone sends a SCCP keep-alive to the primary server every 30 seconds.
D. The phone sends a SCCP keep-alive to the tertiary server every 90 seconds.
E. The phone sends a SCCP keep-alive to the primary server every 10 seconds.

Answer: AC

NEW QUESTION 517
An incoming call is coming from an endpoint not configured on any of the zones on Cisco VCS. Which zone is this call coming from?

A. default
B. subzone
C. unknown
D. traversal

Answer: A

NEW QUESTION 518
You have a video call between two Cisco IP phones. According to Cisco best practices, which DSCP (PHB) values must be used for call signaling, audio system, and video stream?

A. call signaling: CS3, audio: AF41, video: AF41
B. call signaling: AF31, audio: AF41, video: AF41
C. call signaling: CS3, audio: EF, video: AF41
D. call signaling: AF31, audio: EF, video: AF41

Answer: C

NEW QUESTION 519
Which dial plan component is configured in Expressway-C to route a call to the Cisco Unified Communication Manager?

A. call routing
B. traversal subzone
C. search rule
D. call policy

Answer: C

NEW QUESTION 520
When configuring a Cisco Unified Mobility, which calling search space is used by Cisco Unified Communications Manager to send inbound calls out to the remote destination?

A. CSS of the incoming trunk
B. CSS of the remote destination profile
C. rerouting CSS of the remote destination profile
D. device CSS of the user’s IP phone

Answer: C

NEW QUESTION 521
Where must an engineer configure the CMG group in Cisco Unified Communications Manager for call survivability?

A. Media Resources
B. Device
C. Advanced Features
D. System

Answer: D

NEW QUESTION 522
Which two features can you configure on Cisco Expressway? (Choose two.)

A. Interworking of SIP and H.323 when at least one of the involved client is registered to Cisco Expressway.
B. Enable or disable specific codecs for H.245 negotiation.
C. Enable H.323 gatekeeper autodiscover feature on Cisco Expressway.
D. Interworking of H.323 and SCCP for registered endpoints.
E. SCCP with IPv4 or IPv6 addresses.

Answer: AC

NEW QUESTION 523
An engineer must configure a new Audio Codec Preference list for a new site in their network. Which type of list does this configuration establish?

A. ordered list of preferred Audio Codecs used in Locations
B. ordered list of preferred Audio Codecs used in Device Mobility Groups
C. ordered list of preferred Audio Codecs used in Device Pools
D. ordered list of preferred Audio Codecs used in Regions

Answer: D

NEW QUESTION 524
When a zone is configured on a VCS, which media encryption mode uses the encryption requested by the target system/endpoint?

A. force encrypted
B. force unencrypted
C. auto
D. best effort

Answer: C

NEW QUESTION 525
Which protocols can be used for firewall traversal in a VCS deployment?

A. Assent and H.460
B. TCP and TLS
C. SIP and H.323
D. H.225 and H.461

Answer: C

NEW QUESTION 526
An engineer wants to ensure that an override happens for device-level settings when a video device is roaming within a device mobility group. Which setting in a roaming profile can override the same configuration settings when not roaming in the device pool?

A. SRST Reference
B. Region
C. Media Resource Group List
D. Calling Party Transformation CSS
E. Location

Answer: D

NEW QUESTION 527
A company has a traversal client that resides in the DMZ in the enterprise network and has a requirement for B2B calling. Which Cisco Collaboration Edge component addresses this requirement?

A. Cisco Expressway-C
B. Cisco TelePresence ISDN gateway
C. Cisco Expressway-E
D. Cisco Unified Border Element

Answer: C

NEW QUESTION 528
……

P.S.

PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(530q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy the short link and open it in your web browser!!!)]

By the way, more CCNP Collaboration dumps collection FYI:

1. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(419q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(377q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(295q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

cj how many questions in spoto? you says there are more then PL.

spoto contains 190 questions where it contains the new questions on 300-085 exam. PL has a lot of out of date questions.

if you’ve passed exam and you got spoto why wouldn’t you share some questions beside those of which we already know on vocietut?

I spent $180 on spoto. I need to recover some to prepare for next exam. For a small fee $25. I will share. cjc20100 at yahoo dot com.

Does anyone have the latest questions for 300-085?

I used Spoto for 300-085. All new questions are on there. Passed 1/13/20 with 9xxx/1000

CJ would using SPOTO work for passing the test or is PL also needed?

I’m planning to take an exam soon. Anyone could share their experience? what is minimum score to pass exam now?

Thanks for any advises!

Cris, Yes SPOTO will work just fine.

WeNT, 60 Questions, minimum 860, 75 minutes

It being Jan 2020 and unity express being a dead product is there still unity express questions on the test?

spoto looks shady as all hell. lol.

yes quite a few unity express on there. TMS, VCS, IMP and Jabber. You only can miss 8 questions out of 60. Anything more than that, you will fail this test.

Anonymous have you taken this exam recently? looks like you know quite a bit about it.

Any advises?

Anonymous,
Cisco Career Certification exams scores are based on a point scaling system that is widely used in the industry. Your score can fall within a point scale of 300 to 1000 points. You are automatically awarded 300 points for beginning the test and can score up to 1000 points if you answer every question correctly on the exam. Please note that the specific number of points awarded to a given question varies on each of our different exams. This does not change the content or format of the exam or the way in which the exam is graded.

60Q, 860 points, but 80% (700 max /560 pass) of 60 is 12 wrong answers.

Failed the exam today, passleader dump not enough to pass, lots of new questions. You need to study well TMS, TMSPE, and integration with VCS and expressway
Some questions are about
– TMS SDR-Report
– TMS Bridge utilization
– Contact source for cucm administration when using Jabber: choices – (JBOSS, DHCP, XMPP, UDS)
– What is the sip trunk between cucm and im&p used for?
– Who is responsable for taking incomming call from outside the local network when using tms and vcs with expressway: choices ( tms, vcs, expressway-c, expressay-e)
– interval can you reset for failed logon attempts on unity express choices: (1, 3, 5 and 10 minutes)
Good luck to you all

what passleader dumps were you using if I might ask you that question?

– TMS SDR-Report
– TMS Bridge utilization not sure if that what you referring to >>> (Which statement about the Cisco TelePresence Management Suite bridge utilization report is true? answer: The bridge utilization report contains the TelePresence Conductor and all the bridges it manages.)
– Contact source for cucm administration when using Jabber: choices – (JBOSS, DHCP, XMPP, UDS) answer: XMPP

– Who is responsable for taking incomming call from outside the local network when using tms and vcs with expressway: choices ( tms, vcs, expressway-c, expressay-e) Answer: expresswayE
– interval can you reset for failed logon attempts on unity express choices: (1, 3, 5 and 10 minutes) answer: 5 minutes

Zak

86% percent is the passing score. 1000 is max you can get off 60Qs. Each question worth 16.66 points, 16.66(each question) x 8 = 133.28 point if you missed that many. 1000-133.28 = 866.72 points. You can only missed 8 questions. Missed 9 will drop your points down to 850.06 which is fail.

WeNt
passleader is not up to date. you will fail if that was the only material that you used. Enough new questions on exam not from pl.

WeNt,
yes, I took the 300-085 on the 13th January and passed with 9xxx

Just took and failed. Came close but not close enough. CJ seems to have the most accurate account of the new questions. I can’t believe they are still putting new stuff on this test. Its obsolete next month. The only place unity express lives is in this exam lol.

rpmking you said before that you have spoto dumps and you’ve failed? looks like even they were not sufficient to pass the exam.
Can you share your experience? any more questions remembered except those we already know from Riou?
I will appreciate any input as I’m taking exam next week 🙂 maybe something on my email edu_cmg at hotmail dot com?

Hi Guys

someone who shares the spoto dump and I share the prepaway dump please koenmay at outlook dot com

MayKoen how many questions have prepaway dumps?

I think there might be some incorrect answers in the recent ones.

[Q]A CUC user imported in CUCM which is integrated to LDAP changed his AD password. User can login to all other systems but not to CUC web application page. Which can be the cause of this?
[A] Suggested answer: CUC administrator forgot to use Sync Users page… If system is properly integrated with LDAP (if it was working before password change) then it don’t need any action to be taken by administrator. Imagine how many cases it could generate for operations …

– TMS SDR-Report
– TMS Bridge utilization not sure if that what you referring to >>> (Which statement about the Cisco TelePresence Management Suite bridge utilization report is true? answer: The bridge utilization report contains the TelePresence Conductor and all the bridges it manages. – is wrong
“The only supported bridges are DIRECT-MANAGED TelePresenceServers and TelePresenceMCUs.

– Contact source for cucm administration when using Jabber: choices – (JBOSS, DHCP, XMPP, UDS) answer: UDS (why XMPP?)

Zak you are completely right 🙂 I found it too!
If this is what spoto looks like then I better don’t want to see it lol

@WeNt

The Dump have 289 questions .

Regards.

passed the exam today

Hi nick which dumps did you use to pass?

hello Nick, Any new questions on your exam that are not mentioned here.

I didn’t use the SPOTO dumps for my exam. I just think the process of getting them is weird. I got them from CJ and he is a legit guy. Ask him for them and he will get them to you.

Question from new test:

A Cisco Unity Connection System has users imported from the Cisco Unified Communications Manager, which in turn is integrated with LDAP. A user has reset the LDAP password and can authenticate with the organization’s other systems, but cannot authenticate with Cisco Unity Connection Web application despite using the same and correct username and password.

Which cause of this issue is true?

A. The Cisco Unity Connection administrator forgot to use the Synch Users page, which must be performed when Cisco Unified CM is directly integrated to LDAP and Cisco Unity Connection imported the users from Cisco Unified Communications Manager.

B. The user Is locked out of Cisco Unity Connection due to too many incorrect tries.

C. The user does not have the default web application authentication rule associated In Cisco Unity Connection.

D. The Cisco Unity Connection administrator did not use the Synch Users option.

E. The Cisco Unity Connection administrator changed the PIN in Cisco Unity Connection admin for the user.

The bridge question: Correct answer is video only

@rpmking

What was your answer????

A Cisco Unity Connection System has users imported from the Cisco Unified Communications Manager, which in turn is integrated with LDAP. A user has reset the LDAP password and can authenticate with the organization’s other systems, but cannot authenticate with Cisco Unity Connection Web application despite using the same and correct username and password.

Which cause of this issue is true?

A. The Cisco Unity Connection administrator forgot to use the Synch Users page, which must be performed when Cisco Unified CM is directly integrated to LDAP and Cisco Unity Connection imported the users from Cisco Unified Communications Manager.

B. The user Is locked out of Cisco Unity Connection due to too many incorrect tries.

C. The user does not have the default web application authentication rule associated In Cisco Unity Connection.

D. The Cisco Unity Connection administrator did not use the Synch Users option.

E. The Cisco Unity Connection administrator changed the PIN in Cisco Unity Connection admin for the user.

rpmking, did you pass the test(300-085)?

Anonymous –

I believe the answer is A. Think about it like this. You are connecting to LDAP so none of your authentication rules apply at that point because everything goes through LDAP. That being said CUCM LDAP doesn’t sync with Active Directory all the time, its only every few hours so there will be a time period where the user won’t be albe to login until you do an LDAP sync in CUCM on the LDAP Directory Page.

CCNP-Pro

I did not but I came close. I think I have everything now that I need to pass. I’m taking the test again soon. I’ll let you know.

@rpmking what dumps are you using for the test? passleader and spoto?

hey, I recently passed this exam 9xx with minimum score level 860. Unfortunately PL295 has so many mistakes in their dumps and with my luck I had all of these questions I marked myself as wrong in materials (~20Q) – be aware of that. Dumping question/answer will not lead you to an success.

I had also this question from rpmking. Question is a mess and you need you split it into parts to get it.

A user which was imported from CUCM to Unity, which in turn in CUCM is integrated with LDAP. It means A. CUCM do not store password for this user, B. user imported from CUCM has 2 passwords for authentication PIN and web credentials. Based on that and above answers there is no way user is able to authenticate with LDAP password, so he simply inserted too many time incorrect password and locked his account.

@chris – i’m using spoto i got from cj. Some of the answers were wrong so i went through the whole file and looked them all up. I also have some old tests from exam labs. I’m hoping to pass with both of these. the problem is i don’ t have all the unity express questions so I’m reviewing some old stuff on that. I never have luck with passleader.

@rpmking and guys

Share your email and I give you my dump prepaway, I also give you a page that I use for help.

h*t*t*p*s:**//**vceguide.com/which-cisco-tms-component-manages-scheduled-and-unscheduled-conference-activity/ (remove stars)

maybe the answers are not correct but you investigate them.

if anyone has new questions I thank them for sharing

Regards.

Hello guys!
Can somebody share with me offical learning guide CAPPS?

Hola, everybody!

The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 516
Which two default SCCP keep-alive intervals are generated from a phone to a Cisco Unified Communications Manager server? (Choose two.)

A. The phone sends a SCCP keep-alive to the backup server every 60 seconds.
B. The phone sends a SCCP keep-alive to the backup server every 30 seconds.
C. The phone sends a SCCP keep-alive to the primary server every 30 seconds.
D. The phone sends a SCCP keep-alive to the tertiary server every 90 seconds.
E. The phone sends a SCCP keep-alive to the primary server every 10 seconds.

Answer: AC

NEW QUESTION 517
An incoming call is coming from an endpoint not configured on any of the zones on Cisco VCS. Which zone is this call coming from?

A. default
B. subzone
C. unknown
D. traversal

Answer: A

NEW QUESTION 518
You have a video call between two Cisco IP phones. According to Cisco best practices, which DSCP (PHB) values must be used for call signaling, audio system, and video stream?

A. call signaling: CS3, audio: AF41, video: AF41
B. call signaling: AF31, audio: AF41, video: AF41
C. call signaling: CS3, audio: EF, video: AF41
D. call signaling: AF31, audio: EF, video: AF41

Answer: C

NEW QUESTION 519
Which dial plan component is configured in Expressway-C to route a call to the Cisco Unified Communication Manager?

A. call routing
B. traversal subzone
C. search rule
D. call policy

Answer: C

NEW QUESTION 520
When configuring a Cisco Unified Mobility, which calling search space is used by Cisco Unified Communications Manager to send inbound calls out to the remote destination?

A. CSS of the incoming trunk
B. CSS of the remote destination profile
C. rerouting CSS of the remote destination profile
D. device CSS of the user’s IP phone

Answer: C

NEW QUESTION 521
Where must an engineer configure the CMG group in Cisco Unified Communications Manager for call survivability?

A. Media Resources
B. Device
C. Advanced Features
D. System

Answer: D

NEW QUESTION 522
Which two features can you configure on Cisco Expressway? (Choose two.)

A. Interworking of SIP and H.323 when at least one of the involved client is registered to Cisco Expressway.
B. Enable or disable specific codecs for H.245 negotiation.
C. Enable H.323 gatekeeper autodiscover feature on Cisco Expressway.
D. Interworking of H.323 and SCCP for registered endpoints.
E. SCCP with IPv4 or IPv6 addresses.

Answer: AC

NEW QUESTION 523
An engineer must configure a new Audio Codec Preference list for a new site in their network. Which type of list does this configuration establish?

A. ordered list of preferred Audio Codecs used in Locations
B. ordered list of preferred Audio Codecs used in Device Mobility Groups
C. ordered list of preferred Audio Codecs used in Device Pools
D. ordered list of preferred Audio Codecs used in Regions

Answer: D

NEW QUESTION 524
When a zone is configured on a VCS, which media encryption mode uses the encryption requested by the target system/endpoint?

A. force encrypted
B. force unencrypted
C. auto
D. best effort

Answer: C

NEW QUESTION 525
Which protocols can be used for firewall traversal in a VCS deployment?

A. Assent and H.460
B. TCP and TLS
C. SIP and H.323
D. H.225 and H.461

Answer: C

NEW QUESTION 526
An engineer wants to ensure that an override happens for device-level settings when a video device is roaming within a device mobility group. Which setting in a roaming profile can override the same configuration settings when not roaming in the device pool?

A. SRST Reference
B. Region
C. Media Resource Group List
D. Calling Party Transformation CSS
E. Location

Answer: D

NEW QUESTION 527
A company has a traversal client that resides in the DMZ in the enterprise network and has a requirement for B2B calling. Which Cisco Collaboration Edge component addresses this requirement?

A. Cisco Expressway-C
B. Cisco TelePresence ISDN gateway
C. Cisco Expressway-E
D. Cisco Unified Border Element

Answer: C

NEW QUESTION 528
……

P.S.

PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(530q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy the short link and open it in your web browser!!!)]

By the way, more CCNP Collaboration dumps collection FYI:

1. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(416q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(377q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(295q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

@rpmking

Did you use the SPOTO from cj for preparation of your 1st attempt or did you get it afterwards?
Why do you need additional Unity Express questions when all you need is the SPOTO dump? (I think somebody wrote that SPOTO is sufficient to pass!?)

thanks !!

@Urs I didn’t use spoto my first try. Using it now. Bunch of unity express questions. I want to make sure I pass so I’m brushing up. Spoto doesn’t have the unity express questions. Taking the test soon. Will let you know how it goes with my material.

@Rocco – this isn’t the 300-075 forum…stop spamming please.

@rpmking
ok, thanks for clarification! I curious about your feedback. Good Luck anyway!!!

@ALL
similar posts like the one from “Rocco Rotunno” appear on all the exam forums here. Are they all fake/spam? …or are some of the questions posted real? thx

@rpmking do u mind sharing spoto. I’m taking the test next week and l’ll share my fed back.

Took my exam saw new question:
something like High-Complexity Codecs (choose three)
A.G.726
B.G.722
C.G.723
D.G.729
E.Modem Reply
Think D,C,E

Token Buckets:
mean rate = burst size / time interval

some on DiffServ architecture RFC-2475

Would appreciate if anyone could send me the valid dump for 300-085
r a h i m a m i r 2 1 2 @ g m a i l . c o m
Thanks in advance

Green6,

what exam did you take? did you pass it?

Token Buckets:mean rate = burst size / time interval ????

some on DiffServ architecture RFC-2475 ?????

thanks

@Rocco Rotunno January 30th, 2020

Thanks for sharing!!!

Passed 300-085 test on 31/Jan/2020.

The PassLeader 300-085 dumps with 295Q is valid for passing, few new questions.

Good luck!

Can anyone validate if SPOTO and Pass leader dumps are enough to pass 300-085?

Hi,

Anyone have a legit file that could help me get pass this cert? and if not thanks for considering

Have a great day

If so plz email {email not allowed}.m.

studymodewg@ g m a i l c o m

Let me know if anyone needs passleader 300-075 530Q Valid I passed the test. 300-085 295Q passleader. I am willing to share both VCE and PDFs.

300-075 22$ both vce pdf
300-085 22$ both vce pdf

you can email me at brianfury062391 @ gmail com, I also have some new questions that I can share.

@rpmking,
did you take the test again (300-085)?

Hi Guys today passed

Questions News.., same that @Riou

new questions like

1. interval can you reset for failed logon attempts on unity express

choices: 1, 3, 5 and 10 minutes….

TMS allocates a random number for the conference that back to back…

choices: 6 hours after the end time for a new and edited conference, if no unused number available Cisco TMS tries a 2 hour windows, then….
and a 4-hour windows around the conference….

TMS and CDR, IMP logging collection, etc.

Some questions are about
– TMS SDR-Report
– TMS Bridge utilization
– Contact source for cucm administration when using Jabber: choices – (JBOSS, DHCP, XMPP, UDS)
– What is the sip trunk between cucm and im&p used for?
– Who is responsable for taking incomming call from outside the local network when using tms and vcs with expressway: choices ( tms, vcs, expressway-c, expressay-e)
– interval can you reset for failed logon attempts on unity express choices: (1, 3, 5 and 10 minutes)
Good luck to you all

Please share your experience on exam 210-060 and valid dump. Thank you so much for your help!
needhelp18000 @ gmail.com

Does anyone has the answer to the unity express failed login attempts question? The questions is not clear?
This is the setup for unity express:

Lockout policy is set to temp-lock.
Lockout duration is set 5 minutes.
Number of initial login attempts is set to 3.
Number of maximum login attempts is set to 24.

Passed the test…finally.

One question I didn’t have was about CDR…can’t remember what it was about. Another question about unity connection and what needs to be configured manually in cucm pick 2 (route group, hunt list, line group, hunt pilot) Its confusing cuz the wizard configures most of that stuff so I definitely got that wrong.

@rpmking what did you use for the test? did the SPOTO dump come in handy

Took and Passed 300-070 saw about 10 new questions not on any dumps

can someone share me 300-080? and I can share all the others 300-070.075 and 080 Please.

koenmay @ outlook dot com

passed both 300-080 (mid jan) and 300-085 (early feb) using the spoto from this guy below

If someone needs 300-080 (CTCOLLAB) and 300-085 (CAPPS) I have updated and valid SPOTO dumps. I passed both this month with 9XX score.

Write me anticantisa9 AT gmail DOT com

both were legit!

@rpmking: good work!!! question about spoto file, were there like a lot of incorrect answers on that file? and was the question total on your spoto file, 190Q?

i am hoping to take this early next week (gives me a week for just in case). but i went through the spoto file i have, and found a pretty decent amount of answer that i did not think they were correct. i will report back after the exam to inform ya.

I used the spoto 190 and i got 9xx recently, the 190 seems very legit

@rpmking
were there a lot of questions on the exam that where not in the SPOTO 190Q?
What’s about the unity express questions you mentioned earlier (you said they are not in SPOTO)?

Finally, is SPOTO enough or what else do you recommend for exam prep.?

Thanks a lot!

Hello ~ or rpmking,

Did you get hold of the spoto materials from spoto? I am looking from a copy as well but spoto wanted $175 for it and they methods are kind of weird. I am hesitate to buy it from them.
thanks

I got it from the email address posted below

anticantisa9 AT gmail DOT com

fair price and both were very accurate, i know getting advice from no name internet folks is strange but his info worked for me.

can someone share me 300-080? and I can share all the others 300-070 300-075 and 085 Please.

koenmay @ outlook dot com

Hi!!!

can someone share me 300-080? and I can share all the others 300-070 300-075 and 085 Please.

koenmay @ outlook dot com

I took the exam today and passed 9xx/1000 there were 3 new questions

What interval can you set for failed logon attempts reset on unity express” (or something like that)
Answers: 1 Minute, 3 Minutes, 5 Minutes, 10 Minutes.
The default is 5 minute

A unity express and CDR question that i don’t currently remember

I used SPOTO (190q) that i got from CJ (cjc20100 AT yahoo dot c0m) that was the only dump i used all questions came from here

Hi cris,

Congrats! Did you correct some wrong answers in SPOTO? Or you stick with the answers provided there?

Hi Cris, was this question on the exam too? If so, what is the answer?
A Cisco Unity Connection System has users imported from the Cisco Unified Communications Manager, which in turn is integrated with LDAP. A user has reset the LDAP password and can authenticate with the organization’s other systems, but cannot authenticate with Cisco Unity Connection Web application despite using the same and correct username and password.

Hi!!!

The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 515
Which command to generate a certificate for a TLS trunk on VCS is correct?

A. genrsa -out privatekey.pem 1024
B. genrsa -out privatekey.pcs 1024
C. openssl -out privatekey.pem 1024
D. genrsa -in privatekey.pem 1024

Answer: A

NEW QUESTION 516
Which two default SCCP keep-alive intervals are generated from a phone to a Cisco Unified Communications Manager server? (Choose two.)

A. The phone sends a SCCP keep-alive to the backup server every 60 seconds.
B. The phone sends a SCCP keep-alive to the backup server every 30 seconds.
C. The phone sends a SCCP keep-alive to the primary server every 30 seconds.
D. The phone sends a SCCP keep-alive to the tertiary server every 90 seconds.
E. The phone sends a SCCP keep-alive to the primary server every 10 seconds.

Answer: AC

NEW QUESTION 517
An incoming call is coming from an endpoint not configured on any of the zones on Cisco VCS. Which zone is this call coming from?

A. default
B. subzone
C. unknown
D. traversal

Answer: A

NEW QUESTION 518
You have a video call between two Cisco IP phones. According to Cisco best practices, which DSCP (PHB) values must be used for call signaling, audio system, and video stream?

A. call signaling: CS3, audio: AF41, video: AF41
B. call signaling: AF31, audio: AF41, video: AF41
C. call signaling: CS3, audio: EF, video: AF41
D. call signaling: AF31, audio: EF, video: AF41

Answer: C

NEW QUESTION 519
Which dial plan component is configured in Expressway-C to route a call to the Cisco Unified Communication Manager?

A. call routing
B. traversal subzone
C. search rule
D. call policy

Answer: C

NEW QUESTION 520
When configuring a Cisco Unified Mobility, which calling search space is used by Cisco Unified Communications Manager to send inbound calls out to the remote destination?

A. CSS of the incoming trunk
B. CSS of the remote destination profile
C. rerouting CSS of the remote destination profile
D. device CSS of the user’s IP phone

Answer: C

NEW QUESTION 521
Where must an engineer configure the CMG group in Cisco Unified Communications Manager for call survivability?

A. Media Resources
B. Device
C. Advanced Features
D. System

Answer: D

NEW QUESTION 522
Which two features can you configure on Cisco Expressway? (Choose two.)

A. Interworking of SIP and H.323 when at least one of the involved client is registered to Cisco Expressway.
B. Enable or disable specific codecs for H.245 negotiation.
C. Enable H.323 gatekeeper autodiscover feature on Cisco Expressway.
D. Interworking of H.323 and SCCP for registered endpoints.
E. SCCP with IPv4 or IPv6 addresses.

Answer: AC

NEW QUESTION 523
An engineer must configure a new Audio Codec Preference list for a new site in their network. Which type of list does this configuration establish?

A. ordered list of preferred Audio Codecs used in Locations
B. ordered list of preferred Audio Codecs used in Device Mobility Groups
C. ordered list of preferred Audio Codecs used in Device Pools
D. ordered list of preferred Audio Codecs used in Regions

Answer: D

NEW QUESTION 524
When a zone is configured on a VCS, which media encryption mode uses the encryption requested by the target system/endpoint?

A. force encrypted
B. force unencrypted
C. auto
D. best effort

Answer: C

NEW QUESTION 525
Which protocols can be used for firewall traversal in a VCS deployment?

A. Assent and H.460
B. TCP and TLS
C. SIP and H.323
D. H.225 and H.461

Answer: C

NEW QUESTION 526
An engineer wants to ensure that an override happens for device-level settings when a video device is roaming within a device mobility group. Which setting in a roaming profile can override the same configuration settings when not roaming in the device pool?

A. SRST Reference
B. Region
C. Media Resource Group List
D. Calling Party Transformation CSS
E. Location

Answer: D

NEW QUESTION 527
A company has a traversal client that resides in the DMZ in the enterprise network and has a requirement for B2B calling. Which Cisco Collaboration Edge component addresses this requirement?

A. Cisco Expressway-C
B. Cisco TelePresence ISDN gateway
C. Cisco Expressway-E
D. Cisco Unified Border Element

Answer: C

NEW QUESTION 528
……

P.S.

PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(530q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy the short link and open it in your web browser!!!)]

And,

More CCNP Collaboration dumps collection FYI:

1. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(416q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(377q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(295q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

@Blue

What are the choices?

@ Chris/All

Did you correct some wrong answers in SPOTO? Or you stick with the answers provided there?

THX

@GC

The choices r

Which cause of this issue is true?
A. The Cisco Unity Connection administrator forgot to use the Synch Users page, which must be performed when Cisco Unified CM is directly integrated to LDAP and Cisco Unity Connection imported the users from Cisco Unified Communications Manager.
B. The user Is locked out of Cisco Unity Connection due to too many incorrect tries.
C. The user does not have the default web application authentication rule associated In Cisco Unity Connection.
D. The Cisco Unity Connection administrator did not use the Synch Users option.
E. The Cisco Unity Connection administrator changed the PIN in Cisco Unity Connection admin for the user.

Can someone help me with answers of these questions:

On Cisco Unified IM & Presence, which two services are essential for providing chat capabilities to the Cisco Jabber client? (Choose two.)
A. Cisco Presence Engine

B. Cisco SIP Proxy

C. Cisco TFTP
D. Cisco Tomcat

E. Cisco Database
Answer: AB -> SPOTO says BE ?? (What is correct?)

What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.

B. Cisco Jabber must be enabled on Cisco VCS.

C. H.323 support must be enabled.

D. Interworking must be enabled on VCS Control.

Answer: B -> SPOTO says D ??(What is correct?)

THX

@GC I believe the question is

A Cisco Unity Connection System has users imported from the Cisco Unified Communications Manager, which in turn is integrated with LDAP.A user has reset the LDAP password and can authenticate with the organization’s other systems, but cannot authenticate with Cisco Unity Connection Web application despite using the same and correct username and password. Which cause of this issue is true?

A. The Cisco Unity Connection administrator forgot to use the Synch Users page, which must
be performed when Cisco Unified CM is directly integrated to LDAP and Cisco Unity
Connection imported the users from Cisco Unified Communications Manager.
B. The user Is lockatiout of Cisco Unity Connection due to too many incorrect tries.
C. The user does not have the default web application authentication rule associated In Cisco
Unity Connection.
D. The Cisco Unity Connection administrator did not use the Synch Users option.
E. The Cisco Unity Connection administrator changed the PIN in Cisco Unity Connection admin
for the user.

@GC I believe the question is

A Cisco Unity Connection System has users imported from the Cisco Unified Communications Manager, which in turn is integrated with LDAP.A user has reset the LDAP password and can authenticate with the organization’s other systems, but cannot authenticate with Cisco Unity Connection Web application despite using the same and correct username and password. Which cause of this issue is true?

A. The Cisco Unity Connection administrator forgot to use the Synch Users page, which must
be performed when Cisco Unified CM is directly integrated to LDAP and Cisco Unity
Connection imported the users from Cisco Unified Communications Manager.
B. The user Is lockatiout of Cisco Unity Connection due to too many incorrect tries.
C. The user does not have the default web application authentication rule associated In Cisco
Unity Connection.
D. The Cisco Unity Connection administrator did not use the Synch Users option.
E. The Cisco Unity Connection administrator changed the PIN in Cisco Unity Connection admin
for the user.
Answer A

@Blue Yes, I corrected the answers i used this site to search for some of the questions that i wasn’t sure about or just to spot check

vceguide.com/cisco/300-085-implementing-cisco-collaboration-applications/

@Urs:

On Cisco Unified IM & Presence, which two services are essential for providing chat capabilities to the Cisco Jabber client? (Choose two.)
A. Cisco Presence Engine

B. Cisco SIP Proxy

C. Cisco TFTP
D. Cisco Tomcat

E. Cisco Database
Answer: AB -> SPOTO says BE ?? (What is correct?) – I will choose AB

What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.

B. Cisco Jabber must be enabled on Cisco VCS.

C. H.323 support must be enabled.

D. Interworking must be enabled on VCS Control.

Answer: B -> SPOTO says D ??(What is correct?) – I will choose D

For others, need your help to confirm the correct answer please…Thanks

@GC: answers
A and B; that is what i came up with as well. look at deployment guide for IMP 10.5
Ensure the following services are started and activated:
Cisco SIP Proxy
Cisco Sync Agent
Cisco XCP Authentication Service
Cisco XCP Connection Manager
Cisco XCP Text Conference Manager
Cisco Presence Engine
– i got that snipnet from deployment guide.
i choose Sip Proxy and Presence engine

Collab edge deployment:
Answer is D; B is NOT CORRECT
-‘cisco jabber’ is not enabled on vcs. you can’t do collab edge with vcs; it only works with EXPRESSWAY. yes, i know they are the same appliance; but there are 2 different ‘functions’ of the VCS
VCS Control/Expressway
Expressway Control/’E’

all:
-just passed with a mid 900 score. taken today @ 1145 AM 2/10/20. Somethings you need to know about the SPOTO FILE:
1. is about 59 out 60 questions on the exam. there is one question about LDAP/AD/IMPORT USERS in CUE; that is not on the file.
2. i would safe to assume there are about 15-20 questions INCORRECT on the Spoto file; i know i corrected a lot of them on my study. i am not sure if my explanations are correct, but found absolutely incorrect answers on that file. if you study just the QAs on that file (literally uses their answers); you will most definitely fail…

@sub

Thanks! Excellent explanation and justification…Have you passed the exam already or still preparing for it?

@sub

Sorry my last inquiry to you is a bit late…Congratulations for passing the exam…Would you mind sharing your corrected answers from spoto dump?

@GC:
i know the story of my freaking life.. minute late and a dollar short!! hahaha..

yeah passed exam today.

how do you share a file on here?

@sub

here’s my address

ericmart1977 at gmail dot com

just need to know if we have similar corrections…thanks

@Sub I found a lot of wrong answers too. Do you mind sharing your file with me too.
delta3071 at gmail dot com

Hello Sub and Blue, please email me if you have corrected SPOTO answers file.

brianfury062391 @ gmail.com