Can someone help me to clarify, which answer is the right one? I saw many different opinions on different sites, but nothing is described.
Thank you
apdp
October 15th, 2015
Used Nina’s PDF and passed 300-070 exam today !! Thanks Nina ๐
Greg
October 16th, 2015
Hi, Which answers are wrong in a q366 dump?
testtaker
October 16th, 2015
aopass4sure is riddle with wrong answers….I personally would not use it.
testtaker
October 16th, 2015
Failed again you dont know pain. Ive taken this shit 4 times..this includes 10mnts of study, training, replay videos, multiple books..things will change after the 20th…going to dig deep wish me luck….
CoLe
October 16th, 2015
@testtaker: CIPTV1 should be an alternate for you. ๐
good luck
Nick
October 17th, 2015
642-447 Passed today with 94X Marks Used 366 Dump with Ansar Corrections and CPT1 V8.0 Student Book all answers there.
pass
October 17th, 2015
Ansar dump is ok. Same question like a marco on previus page. I scored 960.
Faisal
October 17th, 2015
Which answers are wrong in q366 dump?
Zianeb
October 17th, 2015
Which answers are wrong in q366 dump?
CoLe
October 18th, 2015
For example the question about presence terms.
You work as a network technician at Abc.com. Your boss, Miss ABC, is interested in Presence terms.
Match the proper Presence term with appropriate description.
The right order is:
Loss of privacy
DoS
Loss of integrity
Impersionation
It’s useless to say which question it is because I made my own dump.vce and delete all duplicated questions. So I have a clean dump with 350 questions with additional explanations und corrected answers (incl. Ansars) after all long session of inquiries. ๐
B-Nasty
October 19th, 2015
Passed CIPTV-1 with a 9XX. Used Nina’s dump. Thank you Nina!!
Guys, the Link for Nina dump is not valid. can any one else share please?
David
October 21st, 2015
@Helmy -What do you mean by “Link for Nina dump is not valid?” You mean the URL not opening on your side or the actual dumps she shared not valid? Thanks for clarity, don’t scare me ๐
CoLe
October 21st, 2015
@David: What the hell is wrong with you?! oO …link is down, no more, no less.
PS: Nina shares illegal shit, bad girl!
Helmy
October 21st, 2015
@ David, Cole
Calm down guys, the dump is valid as many people already confirmed. But I am talking about the link itself for google drive is not opening any more ๐
So if any one have these files, please share through other media.
Thanks.
jrob
October 21st, 2015
Today i received 9xx on the 300-070 exam. 100% of the questions on my test were off of ninas pdf. I still missed a few, so some of her answers are wrong.
Dan
October 22nd, 2015
Could someone share the latest valid dump?
300-070 CIPTV1
David
October 22nd, 2015
@CoLe -What is wrong now? lol you need help ๐
@Helmy – I have NINA’s dumps, what is your e-mail, I’ll forward them to you. Calm down your friends because they’re swearing at me, lol ๐
CoLe
October 22nd, 2015
That’s what I’ve said …it’s illegal to share the charged dumps. ๐
Pay for it and all become fine.
When all people share the dumps illegal, they will stop the service or make it more expensive.
Anonymous
October 22nd, 2015
@ Cole and David please settle down ur personal conflict ,let us look for the way forward,what we need to make easy way of passing the exams ,every one of us studies and need the ideas from each of us…
I don think its bad to share what its real,if it cause any issue then we can stop it
Thanks
Willys
David
October 22nd, 2015
@Dmon -Check your mails. All the best…All please share feedback with others after writing.
David
October 22nd, 2015
@Vish please check your mails too, share feedback with others too.
Dan
October 23rd, 2015
Anyone have the file : 300-070 CIPTV1?
Thank
Cluster
October 23rd, 2015
Nina’s dump is valid… Passed today with 9xx…..
Cluster
October 23rd, 2015
Ninaโs dump is validโฆ Passed 300-070 today with 9xxโฆ..
Dan
October 23rd, 2015
Cluster , you have the dump ?
Cluster
October 23rd, 2015
@Dan…. Check your email….
Dan
October 23rd, 2015
Thank!!
CoLe
October 23rd, 2015
I think we need a new section for the collab exams. ๐
Btw: Are there any sites for CCIE to share experience und discuss about it?
David
October 23rd, 2015
Sorry I was offline ๐ (Time difference)
> I only have 300-070, 300-075 and 300-080 (ALL VALID).
> I short 300-085 DUMP. Anyone please share this one if you have, preferred from Actualtests, ExamCollection Premium or TestKing. Thanks
David
October 23rd, 2015
@Iresh -Check your mails.
David
October 23rd, 2015
@Billy -You too check your mails
Billy
October 23rd, 2015
Thanks David! I also received a 300-070 PDF that is by actual tests that has 71Q, does anyone know which is more accurate? this one or the one by Nina that is 147Q?
Iresh
October 23rd, 2015
Thanks David !!
I received the same..
Kochaลski
October 24th, 2015
NOTE: 642-447 CIPT1 Last day to test: October 20, 2015
And, I found some useful 300-070/300-075/300-080/300-085 study materials:
PASSED 300-075 TODAY 26/10/2015 with 890/1000 -pass mark 860. I used ONLY NINA’s file, some answers are wrong but enough to pass. THANK YOU NINA MY DARLING. Anyone with 300-085 file please share. I’m writing 300-080 Thursday. Cheeers, back to books.
CoLe
October 26th, 2015
@David: I hope you will fail. ๐
What is wrong with telling us which answers are wrong (in your opinion)?
You don’t know the concept of give-and-take, right?
David
October 27th, 2015
@CoLe – Hahaha, FAIL is part of learning. Fail or Pass I will never stop. ๐
David
October 27th, 2015
@Tolaib Check your mails.
David
October 27th, 2015
@Oleg Check your mails
David
October 27th, 2015
@Tommy Check your mails.
CoLe
October 27th, 2015
When you have enough time and money …yes.
Nevertheless: voicetut isn’t a community yet, because nobody discuss or help, just sharing dumps. That’s pretty bad.
David
October 27th, 2015
@Yakoo done buddy.
Nels
October 28th, 2015
@David ., Please help me sent 300-070 to ren_casmyer@hotmail.com
I have the schedule to exam on this Friday T T.
Hello,
Q:
You need to 8delete an auto-registration Cisco Unified Communications Manager group for a cluster. What should you do?
A. Remove the Cisco Unified CallManager group devices.
B. Disable auto-registration settings in the Cisco Unified CallManager group.
C. Assign a different call group as the auto-registration Cisco Unified CallManager group.
D. Delete the auto-registration Cisco Unified CallManager group without performing any action.
Correct Answer: C
I believe it should be (B). Any comments?
osama
October 29th, 2015
Hello, Could someone share the latest valid dumps?
300-070
300-075
300-080
Thanks,
How are yall even taking the exam for anything when the test is out before the books? How are you doing any actual studying? Or at least doing both?
Oleg
October 29th, 2015
Hi to all.
Here is Q from dump without answer. I believe answer is D. But answer is not full it must be “Drop Ad Hoc Conference if no on-net user left”.
QWUhEicShT CIOUNC M12 d1efault global conference setting should be changed to ensure fraud prevention?
A. Advanced Ad Hoc Conference Enabled
B. Block OffNet to OnNet Transfer
C. MCU Conference Bridge Custom Layout Index
D. Drop Ad Hoc Conference
E. Enable Click-to-Conference for Third-Party Applications
Correct Answer:
Comments?
Voice
October 30th, 2015
@David: could you please share me latest dumps of
300-070
300-075
300-080
@All – Please wait till 300-080 and 300-085 NEW dump is released. Current files are no longer valid. I only managed to pass my 300-075 exam with 114Q dump which is 85% valid (with few wrong answers but enough to pass). Anyone with 300-080 and 300-085 LATEST file please share with us. Thanks
farooq
November 2nd, 2015
@David: please I need 300-070 file, I’ll be writing exam next week.
please which is the correct answer of the following question:
Which CUCM default global conference setting should be changed to ensure fraud prevention?
A.Advanced Ad Hoc Conference Enabled.
B.Block OffNet to OnNet Transfer.
C.MCU Conference Bridge Custom Layout Index.
D.Drop Ad Hoc Conference.
E.Enable Click-to-Conference for Third-Party Applications.
farooq
November 9th, 2015
The right answer is ‘ D ‘
Ad hoc conference restriction
Ad hoc conference calls can be dropped when the originator hangs up. This is achieved by setting the Drop Ad Hoc Conference service parameter to When Conference Controller Leaves under Clusterwide Parameters > Feature > Conference. This ensures that the other parties (such as external users) cannot initiate a call to another external number.
Hussien
November 11th, 2015
Hi to all ,
please which is the correct answer of the following question:
What are two characteristics that are associated with the End User and User account types? (Choose two.)
ูAู.They cannot use LDAP.
B.They are used to authorize applications.
C.They can utilize LDAP.
D.The Application is associated with the End User and User account types.
E.They can be listed in a directory.
Special One
November 12th, 2015
please which is the correct answer of the following question:
What are two characteristics that are associated with the End User and User account types? (Choose two.)
ูAู.They cannot use LDAP.
B.They are used to authorize applications.
C.They can utilize LDAP.
D.The Application is associated with the End User and User account types.
E.They can be listed in a directory.
……The Answer is CD
karim
November 16th, 2015
examdump
karim
November 16th, 2015
anyone take the exam recently, please send your comments
karim
November 18th, 2015
anyone take the exam recently 300-070, please send your comments
Special One
November 19th, 2015
Hi Guys I have passed my 300-070 exam yesterday……
Thanks to God and you guys for support
The first ever Short Message Service (SMS) was sent by Neil Papworth in December of 1992 containing the words “Merry Christmas”.
We have an experienced and expert developers and programmers team
or you can also hire custom Word – Press developers also at an affordable
price. A more complex path to take is to integrate the Drupal rendering engine into Magento:
a tightly coupled architecture.
voicexpert
November 23rd, 2015
do anyone have the study guide 300-700 , i want to buy it but i can’t find it available so i can study for the exams
Anonymous
November 23rd, 2015
peeps you should download latest dumps from this link
” tiny. cc/9tut “
voicexpert
November 24th, 2015
hi guys, i need the study guide , the material of the courses NOT THE EXAM, how can i answer the EXAM without knowing the book, pleas if someone have the study guide , share please.
zoom4bd
November 25th, 2015
Please someone send send some study material or dumps for 300-070 exam auzaman@live.com
Mr.Farenheit
November 29th, 2015
Hi all,
Has anyone confirmed a good dump version for 210-065? I actually have actual tests and their most current dump only covers about 30% of the exam material. I found this out the hard way. Unfortunately the cisco press guide will still not be out for another week or so.
Tim
November 29th, 2015
@David @David do you mind sharing the dump? Cheers dude
@Tim I have access to those dumps and PDFs, but unfortunately I cannot verify them as I haven’t tested on any of them.
David
November 30th, 2015
Hi All, I noticed there are new Q&A for 300-080 & 300-085
300-080 -NEW 118Q (Please share .pdf if you have them)
300-085 -NEW 96Q (Please share .pdf if you have them)
Thanks
Anon GE
November 30th, 2015
New 300-070 Exam Questions and Answers Updated Recently:
NEW QUESTION 72
What are the two benefits of using SIP dial rules on an IP phone? (Choose two)
A. The phone can initiate dialing without sending any signaling messages to Cisco Unified CommunicationsManager.
B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages toCisco Unified Communications Manager.
C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message toCisco Unified Communications Manager.
D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remainingdigits from the SIP phone to Cisco Unified Communications Manager one-by-one.
E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to sendthe remaining digits from the SIP.
Answer: BD
NEW QUESTION 73
Which three Cisco Unified CallManager configuration steps are required to support third party SIP phones? (Choose three.)
A. Configure the device in Cisco Unified CallManager.
B. Change the proxy address in the SIP phone to an IP address or the Fully Qualified Domain Name (FQDN)of Cisco Unified CallManager.
C. Associate the device with the end user.
D. Configure the phone with the TLS username and password.
E. Configure the end user in Cisco Unified CallManager.
F. Add the MAC address of the Cisco Unified CallManager server to the SIP phone configuration page.
Answer: ACE
NEW QUESTION 74
Which four software based media resources require that the Cisco IP voice media stream Application be activated?
A. MOH.
B. SIP.
C. H.323 Gateways.
D. Annunciator.
E. Gatekeeper.
F. MTP.
G. Audio conferencing.
Answer: ADFG
NEW QUESTION 75
Which protocol is recommended to be used between Cisco Unified Communications Manager and the voice gateway to simplify the dial plan?
A. SIP.
B. SCCP.
C. H323.
D. RSVP.
E. MGCP.
Answer: E
NEW QUESTION 76
Which protocol can Cisco Unified Communications Manager not use to monitor the status of the gateway?
A. H.323
B. SIP
C. MGCP
D. SCCP
Answer: A
NEW QUESTION 77
In a centralized call-processing solution, there are five sites connected through an IP WAN. To optimize the utilization of the IP WAN, CAC needs to be implemented. How should CAC be implemented?
A. Use a gatekeeper to control allocated bandwidth properly.
B. Use locations CAC with a single location.
C. Use a gatekeeper and Cisco Unified Border Element to provide CAC to sites that use a combination of SIPand MGCP gateways.
D. Use a gatekeeper to only control those locations that use H.323 gateways and a Cisco Unified BorderElement to control those sites that use MGCP or SIP gateways.
E. Use locations CAC with five locations in addition to Hub none.
Answer: E
NEW QUESTION 78
Which two features are advantages of deploying a cluster over WAN? (Choose two.)
A. Shared line appearances
B. CentralizedDSP resources
C. Extension mobility within the cluster
D. Scalability up to 20 sites, if thereis sufficient IP WAN bandwidth
E. Failover to co-resident Cisco UnifiedCall Manager Express platforms
Answer: AC
NEW QUESTION 79
The Ajax Corporation is designing an IP telephony network using Cisco MCS 7845 Series servers, each one capable of supporting 7500 devices. The design must meet these requirements:
– Be cost-effective
– Support up to 7500 phones
– Provide a minimal level of redundancy
Which configuration will meet Ajax Corporation needs?
A. Two Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
B. Three Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
1 backup subscriber.
C. Four Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
1 backup subscriber.
D. Five Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
2 backup subscribers.
Answer: B
NEW QUESTION 80
How are Cisco Unified CallManager location parameters used?
A. Assign directory numbers to devices as they connect to the IP telephony network.
B. Specify the bandwidth used for audio and video calls.
C. Implement call admission control in a centralized call processing deployment.
D. Provide alternate call routing when the primary call path is unavailable.
Answer: C
NEW QUESTION 81
Which statement regarding Cisco IP voice media streaming application is correct?
A. It should be activated on the gateway in cluster that supports the TFTP service.
B. It should be activated on the gatekeeper in cluster that supports the TFTP service.
C. It should be activated on the node in cluster that does not support the TFTP service.
D. It should be activated on the node in cluster that supports the TFTP service.
Answer: D
NEW QUESTION 82
Which option describes how you add software conference bridges to Cisco Unified Communications Manager?
A. By adding a Cisco Unified CM server to the cluster.
B. By adding a software conference bridge using Conference Bridge Configuration.
C. By installing DSP to a Cisco Unified CM server.
D. By reassigning other media resources to conference resources.
Answer: A
NEW QUESTION 83
Which of these media resources can be configured in Cisco Unified Communication manager? (Choose Three)
A. MOH Server
B. Voice Termination Point DSP
C. Transcoder
D. Auto Attendant
E. Conference Bridge
Answer: ACE
NEW QUESTION 84
What is the relationship between a Region and a Location?
A. The Region codec parameter is used between a Region and its configured Locations.
B. The Region setting for a Location sets the number of audio and video calls that Location can support.
C. The codec parameter configured in the Region is only used between Regions and Location bandwidth isonly used between Locations.
D. The Region codec parameter is combined with Location bandwidth when communicating with otherRegions.
Answer: C
NEW QUESTION 85
……
BTW, These New 300-070 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-070 Dumps In PDF And VCE From โ http://www.passleader.com/300-070.html
Good Luck !!!
Anon GE
November 30th, 2015
New 300-085 Exam Questions and Answers Updated Recently:
NEW QUESTION 61
Which CCC action applies only to the Cisco TelePresence MPS Series?
A. block fast update requests
B. Status Duo Video
C. move back
D. release floor
Answer: A
NEW QUESTION 62
Which protocol is prioritized by Cisco TMS for conferencing?
A. SIP
B. MGCP
C. H.323
D. SCCP
Answer: C
NEW QUESTION 63
How does Cisco TMS set up a call with an endpoint that is registered with Cisco Unified Communications Manager and that is connected to Cisco VCS?
A. Cisco TMS uses an IP dialing plan.
B. Cisco TMS uses a SIP trunk.
C. Cisco TMS removes the top-level domain from calls that go through Cisco Unified Communications Manager.
D. Cisco TMS drops the call, because it can verify that the trunk between Cisco Unified Communications Manager and Cisco VCS is down.
Answer: B
NEW QUESTION 64
On Cisco TelePresence Management Suite, which two call control devices are supported for call control and setup? (Choose two.)
A. Cisco Unified Communications Manager Express
B. Cisco TelePresence Video Communication Server
C. Cisco Unified Border Element
D. Cisco Unified Communications Manager
E. any SIP-capable call control system
Answer: BD
NEW QUESTION 65
Which three are valid system connectivity statuses for systems that are automatically added to Cisco TelePresence Management Suite? (Choose three.)
A. Inaccessible
B. Failed
C. Connected
D. Reachable on Public Internet
E. Behind Firewall
F. Online
G. Remote Site
Answer: ADE
NEW QUESTION 66
To have a Provisioning menu section available on Cisco TelePresence Management Suite, what must you do?
A. You must configure an active ISDN zone.
B. You must install Cisco TelePresence Management Suite Provisioning Extension and activate it on the system.
C. You must license Cisco TelePresence Management Suite Analytics Extension.
D. You must set up Cisco TelePresence deployment to support Cisco CMR Hybrid.
Answer: B
NEW QUESTION 67
Which two actions must you take to enable provisioning on Cisco TMS and Cisco VCS? (Choose two.)
A. Apply a Device Provisioning option key on Cisco VCS.
B. Enable provisioning on Cisco VCS under Applications > Provisioning.
C. Configure Users, FindMe, Phonebooks, and Devices individually, as these all have different settings.
D. Configure a separate server to run provisioning extension services.
E. Ensure that a service account is able to connect.
F. Set the polling intervals on Users, FindMe, Phonebooks, and Devices to the same value, in order for the synchronization to work.
Answer: AE
NEW QUESTION 68
What must you do to activate the provisioning feature on a Cisco VCS endpoint?
A. Install the Device Provisioning option key.
B. Set a SIP trunk between Cisco VCS and Cisco Unified Communications Manager.
C. Add the Cisco VCS on the Cisco TMS, and enable Cisco Extension Mobility.
D. Install Cisco VCS Starter Pack Express.
Answer: A
NEW QUESTION 69
Refer to the exhibit. Which statement about the jabber-config.xml partial output is true?
A. 10.255.10.10 is the LDAP server address.
B. The client connects to the directory server by using SSH.
C. 10.255.10.10 is the Cisco Unified Communications Manager IM and Presence Service address.
D. The client connects to the directory server by using HTTPS.
Answer: D
NEW QUESTION 70
The UDS for contact resolution is enabled in the service profile configuration of the Cisco Unified Communications Manager. Which action can you execute with your Jabber Desktop?
A. modify users
B. search users
C. change users
D. delete users
Answer: B
NEW QUESTION 71
Which profile must you add to an end user record, if the end user wants to access voicemail and wants to control a deskphone via CTI with Cisco Jabber?
A. remote destination profile
B. device profile
C. SIP profile
D. service profile
E. phone service
Answer: D
NEW QUESTION 72
……
BTW, These New 300-085 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-085 Dumps In PDF And VCE From โ http://www.passleader.com/300-085.html
Good Luck !!!
Anon GE
November 30th, 2015
New 300-080 Exam Questions and Answers Updated Recently:
NEW QUESTION 76
Phone A is able to dial the directory number of Phone B and complete a call. However, when Phone B dials the directory number of Phone A, Phone B receives a fast-busy tone. What is causing this issue?
A. Phone A and Phone B are in different partitions.
B. Phone B does not have Phone A in its partition.
C. Phone B is not in the CSS of Phone A.
D. Phone B does not have the CSS of Phone A in its partition.
E. Phone B is not registered.
F. Phone B has the incorrect CSS to dial Phone A.
Answer: F
NEW QUESTION 77
An inbound call from the PSTN is not reaching the directory number that it is calling. When the PSTN phone calls the correct DID, only a dial tone is heard. Which command resolves this issue?
A. (config-dial-peer)#direct-inward-dial
B. (config-controller)# no provide-outside-dialtone
C. (config-if)#no dial-tone
D. (config-dial-peer)# no dial-tone
E. (config-if)#direct-inward-dial
F. (config) allow inbound dial-peer 1
Answer: A
NEW QUESTION 78
When a caller dials 9 plus an external seven-digit number, the caller hears a fast-busy tone after a period of silence. What is causing the silence?
A. There is no dial route for 9XXXXXXX on Cisco Unified Communications Manager.
B. The gateway is not dropping the leading 9, and the PSTN fails.
C. The T302 timer is waiting to expire.
D. The caller does not have the PSTN partition in the CSS.
E. The caller dialed the wrong number.
F. To dial successfully, the caller must enter a Forced Authorization Code.
Answer: C
NEW QUESTION 79
In a single-site deployment model, the internal endpoints are unable to dial from one to the other. What are two possible causes? (Choose two.)
A. The PSTN gateway is not configured.
B. The called endpoint does not have the SIP trunk enabled.
C. The called endpoint is not registered.
D. The calling endpoint is not in the CSS of the called endpoint.
E. The called endpoint is not in the partition of the calling endpoint.
F. The calling endpoint is not configured for the correct CoS.
Answer: CF
NEW QUESTION 80
What is the default interval for SAF hello packets?
A. 15 seconds
B. 15 seconds on links with speeds that are slower than T1 speeds
C. 40 seconds
D. 40 seconds onlinks with speeds that are slower than T1 speeds
E. 60 seconds
F. 60 seconds onlinks with speeds that are slower than T1 speeds
Answer: F
NEW QUESTION 81
Which configuration can be dynamically set using the Cisco Unified Communications Manager Device Mobility feature?
A. phone model and protocol
B. SRST reference and directory number
C. CSS and local gateway
D. partition and CSS
E. media resources and permanent bridges
Answer: C
NEW QUESTION 82
Which configuration is required on Cisco TelePresence Server, in order to support 1080p resolution?
A. Screen licenses must be configured.
B. Cisco TelePresence Server must be in remotely managed mode.
C. Cisco TelePresence Server must be in HD mode.
D. Cisco TelePresence Server must be configured with Cisco TelePresence Conductor.
E. Cisco TelePresence Server must be in Full HD mode.
Answer: E
NEW QUESTION 83
A user is dialing an external PSTN number with a prefix of 01 from a Cisco TelePresence SX10 Quick Set in a Cisco VCS environment. In the past, the Cisco VCS and the ISDN gateway were correctly configured with a prefix of 01, but the calls are now failing. What are three possible causes? (Choose three.)
A. The Cisco VCS Control is down.
B. The interworking setting is turned off.
C. The audio feature in the Cisco TelePresenceSX10 is turned off.
D. The SIP trunk is not configured on the gateway.
E. 01 is not a valid prefix.
F. ISDN is not enabled on the Cisco TelePresenceSX10.
G. The Cisco TelePresenceSX10 is not registered to the Cisco VCS Control.
H. The Cisco TelePresenceSX10 is not registered to the Cisco Express C.
Answer: ABG
NEW QUESTION 84
When the command utils dbreplication status is executed on the Cisco Unified Communications Manager CLI, which step should be taken next to check the database replication status?
A. View the activelog file.
B. Run the same command on all nodes of the cluster.
C. Restart the Cisco CallManager service.
D. The command utils dbreplication runtimestate must be run on the publisher.
E. The command utils dbreplication runtimestate must be run on the subscriber.
Answer: A
NEW QUESTION 85
Which tool can you use to see SAF advertisements in Cisco Unified Communications Manager?
A. Cisco Unified Real-Time Monitoring Tool
B. show eigrp neighbors command
C. debug eigrp commands
D. Terminal Monitor
Answer: A
NEW QUESTION 86
URI dialing is enabled between two clusters with the default options. The engineer that set up the URI dialing verified that all was working properly. However, a user from one of the clusters cannot dial using URI to a user in the same cluster. What do you do to resolve this issue?
A. Verify the password that is used by the authentication under Intercluster Lookup Service configuration.
B. Find out if the URI address of the called user has a capital letter in the URI string.
C. Verify that Intercluster Lookup Service is set up correctly.
D. Verify USN Data Synchronization Status.
Answer: B
NEW QUESTION 87
……
And, These New 300-080 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-080 Dumps In PDF And VCE From โ http://www.passleader.com/300-080.html
Good Luck !!!
Mr.Farenheit
December 1st, 2015
Has anyone recently tested on 210-065?
jack
December 2nd, 2015
any body pass 210-060 ?
which dumps is valid
Jinu Beau
December 2nd, 2015
@Anon GE, thanks a lot!!!
All those new 300-070 questions were appeared in my today’s exam, which are all available in PassLeader 300-070 dumps now! (http://www.passleader.com/300-070.html)
I took exam this morning, and passed with 962/1000 points!
Thanks, ALL!
Koe Craw
December 3rd, 2015
Took 300-070 exam today, got many new questions same as lead2pass 145q, it looked that cisco has updated the 300-070 exam. Passed with the newest 300-070 exam questions, scored 960/1000.
@Failed again: I think everyone wanna know which questions are wrong.
So many peoples write that they passed 300-070 (CIPTV1).
Is it easier as 644-447 or what is going wrong here? ^^
I am learning for CIPT1 this week but I only read about the successful CIPTV1 exam. ๐
@Nina
Many Thanks
http://www.aiopass4sure.com/cisco-exams/642-447-86/what-is-the-output-displayed-on-the-ip-phone-when-the-incoming-calling-number-is-00492288224002-2.html
Can someone help me to clarify, which answer is the right one? I saw many different opinions on different sites, but nothing is described.
Thank you
Used Nina’s PDF and passed 300-070 exam today !! Thanks Nina ๐
Hi, Which answers are wrong in a q366 dump?
aopass4sure is riddle with wrong answers….I personally would not use it.
Failed again you dont know pain. Ive taken this shit 4 times..this includes 10mnts of study, training, replay videos, multiple books..things will change after the 20th…going to dig deep wish me luck….
@testtaker: CIPTV1 should be an alternate for you. ๐
good luck
642-447 Passed today with 94X Marks Used 366 Dump with Ansar Corrections and CPT1 V8.0 Student Book all answers there.
Ansar dump is ok. Same question like a marco on previus page. I scored 960.
Which answers are wrong in q366 dump?
Which answers are wrong in q366 dump?
For example the question about presence terms.
You work as a network technician at Abc.com. Your boss, Miss ABC, is interested in Presence terms.
Match the proper Presence term with appropriate description.
The right order is:
Loss of privacy
DoS
Loss of integrity
Impersionation
It’s useless to say which question it is because I made my own dump.vce and delete all duplicated questions. So I have a clean dump with 350 questions with additional explanations und corrected answers (incl. Ansars) after all long session of inquiries. ๐
Passed CIPTV-1 with a 9XX. Used Nina’s dump. Thank you Nina!!
@Cole please upload your dump.vce … Thank you
passed today 9xx dump valid , Thanks Guys
http://s000.tinyupload.com/index.php?file_id=04291873845316889939
File will be deleted …soooooon.
Nina. Share 300-070 again please!
passed 84X
Guys, the Link for Nina dump is not valid. can any one else share please?
@Helmy -What do you mean by “Link for Nina dump is not valid?” You mean the URL not opening on your side or the actual dumps she shared not valid? Thanks for clarity, don’t scare me ๐
@David: What the hell is wrong with you?! oO …link is down, no more, no less.
PS: Nina shares illegal shit, bad girl!
@ David, Cole
Calm down guys, the dump is valid as many people already confirmed. But I am talking about the link itself for google drive is not opening any more ๐
So if any one have these files, please share through other media.
Thanks.
Today i received 9xx on the 300-070 exam. 100% of the questions on my test were off of ninas pdf. I still missed a few, so some of her answers are wrong.
Could someone share the latest valid dump?
300-070 CIPTV1
@CoLe -What is wrong now? lol you need help ๐
@Helmy – I have NINA’s dumps, what is your e-mail, I’ll forward them to you. Calm down your friends because they’re swearing at me, lol ๐
That’s what I’ve said …it’s illegal to share the charged dumps. ๐
Pay for it and all become fine.
When all people share the dumps illegal, they will stop the service or make it more expensive.
@ Cole and David please settle down ur personal conflict ,let us look for the way forward,what we need to make easy way of passing the exams ,every one of us studies and need the ideas from each of us…
I don think its bad to share what its real,if it cause any issue then we can stop it
Thanks
Willys
@Dmon -Check your mails. All the best…All please share feedback with others after writing.
@Vish please check your mails too, share feedback with others too.
Anyone have the file : 300-070 CIPTV1?
Thank
Nina’s dump is valid… Passed today with 9xx…..
Ninaโs dump is validโฆ Passed 300-070 today with 9xxโฆ..
Cluster , you have the dump ?
@Dan…. Check your email….
Thank!!
I think we need a new section for the collab exams. ๐
Btw: Are there any sites for CCIE to share experience und discuss about it?
Sorry I was offline ๐ (Time difference)
> I only have 300-070, 300-075 and 300-080 (ALL VALID).
> I short 300-085 DUMP. Anyone please share this one if you have, preferred from Actualtests, ExamCollection Premium or TestKing. Thanks
@Iresh -Check your mails.
@Billy -You too check your mails
Thanks David! I also received a 300-070 PDF that is by actual tests that has 71Q, does anyone know which is more accurate? this one or the one by Nina that is 147Q?
Thanks David !!
I received the same..
NOTE: 642-447 CIPT1 Last day to test: October 20, 2015
And, I found some useful 300-070/300-075/300-080/300-085 study materials:
300-070 Exam Dumps
http://www.cipt1.com/category/cisco-2/300-070-exam-dumps/
300-075 Exam Dumps
http://www.cipt1.com/category/cisco-2/300-075-exam-dumps/
P.S. These 300-075 exam questions are the newest, it seems that PassLeader just updated the 300-075 exam!
300-080 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-080-exam-dumps/
300-085 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-085-exam-dumps/
NOTE: 642-447 CIPT1 Last day to test: October 20, 2015
And, I found some useful 300-070/300-075/300-080/300-085 study materials:
300-070 Exam Dumps
http://www.cipt1.com/category/cisco-2/300-070-exam-dumps/
300-075 Exam Dumps
http://www.cipt1.com/category/cisco-2/300-075-exam-dumps/
P.S. These 300-075 exam questions are the newest, it seems that PassLeader just updated the 300-075 exam!
300-080 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-080-exam-dumps/
300-085 Exam Dumps
http://www.cipt2.com/category/cisco-braindump/300-085-exam-dumps/
@ David. Thanks a lot Please share the valid dumps eng-moh-helmy@hotmail.com
PASSED 300-075 TODAY 26/10/2015 with 890/1000 -pass mark 860. I used ONLY NINA’s file, some answers are wrong but enough to pass. THANK YOU NINA MY DARLING. Anyone with 300-085 file please share. I’m writing 300-080 Thursday. Cheeers, back to books.
@David: I hope you will fail. ๐
What is wrong with telling us which answers are wrong (in your opinion)?
You don’t know the concept of give-and-take, right?
@CoLe – Hahaha, FAIL is part of learning. Fail or Pass I will never stop. ๐
@Tolaib Check your mails.
@Oleg Check your mails
@Tommy Check your mails.
When you have enough time and money …yes.
Nevertheless: voicetut isn’t a community yet, because nobody discuss or help, just sharing dumps. That’s pretty bad.
@Yakoo done buddy.
@David ., Please help me sent 300-070 to ren_casmyer@hotmail.com
I have the schedule to exam on this Friday T T.
Done
can anyone share the dumps please for CIPTV1
Hi David may I have ur Skype ID
Thnx
Can anyone mail me the dump please for CIPTV1 farooq_bangush@hotmail.com. thanx in advance.
Hello,
Q:
You need to 8delete an auto-registration Cisco Unified Communications Manager group for a cluster. What should you do?
A. Remove the Cisco Unified CallManager group devices.
B. Disable auto-registration settings in the Cisco Unified CallManager group.
C. Assign a different call group as the auto-registration Cisco Unified CallManager group.
D. Delete the auto-registration Cisco Unified CallManager group without performing any action.
Correct Answer: C
I believe it should be (B). Any comments?
Hello, Could someone share the latest valid dumps?
300-070
300-075
300-080
Thanks,
osshakhatreh@hotmail.com
@Helmy
It should be B but for some reason it is C…
How are yall even taking the exam for anything when the test is out before the books? How are you doing any actual studying? Or at least doing both?
Hi to all.
Here is Q from dump without answer. I believe answer is D. But answer is not full it must be “Drop Ad Hoc Conference if no on-net user left”.
QWUhEicShT CIOUNC M12 d1efault global conference setting should be changed to ensure fraud prevention?
A. Advanced Ad Hoc Conference Enabled
B. Block OffNet to OnNet Transfer
C. MCU Conference Bridge Custom Layout Index
D. Drop Ad Hoc Conference
E. Enable Click-to-Conference for Third-Party Applications
Correct Answer:
Comments?
@David: could you please share me latest dumps of
300-070
300-075
300-080
On: a.faihan@hotmail.com
Thank Cluster , I pass with 9xx
Many thanks @David. I received the file.
Hi David please share the dump 300-70 farooq_bangush@hotmail.com
@All – Please wait till 300-080 and 300-085 NEW dump is released. Current files are no longer valid. I only managed to pass my 300-075 exam with 114Q dump which is 85% valid (with few wrong answers but enough to pass). Anyone with 300-080 and 300-085 LATEST file please share with us. Thanks
@David: please I need 300-070 file, I’ll be writing exam next week.
@farooq E-mail?
@farooq I mailed you on farooq_bangush@hotmail.com yesterday.
@David plz try to send to me if Possible!!!!
examdump
@David : thanks so much for the file.
Hi to all ,
please which is the correct answer of the following question:
Which CUCM default global conference setting should be changed to ensure fraud prevention?
A.Advanced Ad Hoc Conference Enabled.
B.Block OffNet to OnNet Transfer.
C.MCU Conference Bridge Custom Layout Index.
D.Drop Ad Hoc Conference.
E.Enable Click-to-Conference for Third-Party Applications.
The right answer is ‘ D ‘
Ad hoc conference restriction
Ad hoc conference calls can be dropped when the originator hangs up. This is achieved by setting the Drop Ad Hoc Conference service parameter to When Conference Controller Leaves under Clusterwide Parameters > Feature > Conference. This ensures that the other parties (such as external users) cannot initiate a call to another external number.
Hi to all ,
please which is the correct answer of the following question:
What are two characteristics that are associated with the End User and User account types? (Choose two.)
ูAู.They cannot use LDAP.
B.They are used to authorize applications.
C.They can utilize LDAP.
D.The Application is associated with the End User and User account types.
E.They can be listed in a directory.
please which is the correct answer of the following question:
What are two characteristics that are associated with the End User and User account types? (Choose two.)
ูAู.They cannot use LDAP.
B.They are used to authorize applications.
C.They can utilize LDAP.
D.The Application is associated with the End User and User account types.
E.They can be listed in a directory.
……The Answer is CD
examdump
anyone take the exam recently, please send your comments
anyone take the exam recently 300-070, please send your comments
Hi Guys I have passed my 300-070 exam yesterday……
Thanks to God and you guys for support
can you send to me the dump
osshakhatreh@hotmail.com
thx
The first ever Short Message Service (SMS) was sent by Neil Papworth in December of 1992 containing the words “Merry Christmas”.
We have an experienced and expert developers and programmers team
or you can also hire custom Word – Press developers also at an affordable
price. A more complex path to take is to integrate the Drupal rendering engine into Magento:
a tightly coupled architecture.
do anyone have the study guide 300-700 , i want to buy it but i can’t find it available so i can study for the exams
peeps you should download latest dumps from this link
” tiny. cc/9tut “
hi guys, i need the study guide , the material of the courses NOT THE EXAM, how can i answer the EXAM without knowing the book, pleas if someone have the study guide , share please.
Please someone send send some study material or dumps for 300-070 exam
auzaman@live.com
Hi all,
Has anyone confirmed a good dump version for 210-065? I actually have actual tests and their most current dump only covers about 30% of the exam material. I found this out the hard way. Unfortunately the cisco press guide will still not be out for another week or so.
@David @David do you mind sharing the dump? Cheers dude
300-070
300-075
300-080
tim_bozza@hotmail.com
@Tim I have access to those dumps and PDFs, but unfortunately I cannot verify them as I haven’t tested on any of them.
Hi All, I noticed there are new Q&A for 300-080 & 300-085
300-080 -NEW 118Q (Please share .pdf if you have them)
300-085 -NEW 96Q (Please share .pdf if you have them)
Thanks
New 300-070 Exam Questions and Answers Updated Recently:
NEW QUESTION 72
What are the two benefits of using SIP dial rules on an IP phone? (Choose two)
A. The phone can initiate dialing without sending any signaling messages to Cisco Unified CommunicationsManager.
B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages toCisco Unified Communications Manager.
C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message toCisco Unified Communications Manager.
D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remainingdigits from the SIP phone to Cisco Unified Communications Manager one-by-one.
E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to sendthe remaining digits from the SIP.
Answer: BD
NEW QUESTION 73
Which three Cisco Unified CallManager configuration steps are required to support third party SIP phones? (Choose three.)
A. Configure the device in Cisco Unified CallManager.
B. Change the proxy address in the SIP phone to an IP address or the Fully Qualified Domain Name (FQDN)of Cisco Unified CallManager.
C. Associate the device with the end user.
D. Configure the phone with the TLS username and password.
E. Configure the end user in Cisco Unified CallManager.
F. Add the MAC address of the Cisco Unified CallManager server to the SIP phone configuration page.
Answer: ACE
NEW QUESTION 74
Which four software based media resources require that the Cisco IP voice media stream Application be activated?
A. MOH.
B. SIP.
C. H.323 Gateways.
D. Annunciator.
E. Gatekeeper.
F. MTP.
G. Audio conferencing.
Answer: ADFG
NEW QUESTION 75
Which protocol is recommended to be used between Cisco Unified Communications Manager and the voice gateway to simplify the dial plan?
A. SIP.
B. SCCP.
C. H323.
D. RSVP.
E. MGCP.
Answer: E
NEW QUESTION 76
Which protocol can Cisco Unified Communications Manager not use to monitor the status of the gateway?
A. H.323
B. SIP
C. MGCP
D. SCCP
Answer: A
NEW QUESTION 77
In a centralized call-processing solution, there are five sites connected through an IP WAN. To optimize the utilization of the IP WAN, CAC needs to be implemented. How should CAC be implemented?
A. Use a gatekeeper to control allocated bandwidth properly.
B. Use locations CAC with a single location.
C. Use a gatekeeper and Cisco Unified Border Element to provide CAC to sites that use a combination of SIPand MGCP gateways.
D. Use a gatekeeper to only control those locations that use H.323 gateways and a Cisco Unified BorderElement to control those sites that use MGCP or SIP gateways.
E. Use locations CAC with five locations in addition to Hub none.
Answer: E
NEW QUESTION 78
Which two features are advantages of deploying a cluster over WAN? (Choose two.)
A. Shared line appearances
B. CentralizedDSP resources
C. Extension mobility within the cluster
D. Scalability up to 20 sites, if thereis sufficient IP WAN bandwidth
E. Failover to co-resident Cisco UnifiedCall Manager Express platforms
Answer: AC
NEW QUESTION 79
The Ajax Corporation is designing an IP telephony network using Cisco MCS 7845 Series servers, each one capable of supporting 7500 devices. The design must meet these requirements:
– Be cost-effective
– Support up to 7500 phones
– Provide a minimal level of redundancy
Which configuration will meet Ajax Corporation needs?
A. Two Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
B. Three Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
1 backup subscriber.
C. Four Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
1 backup subscriber.
D. Five Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
2 backup subscribers.
Answer: B
NEW QUESTION 80
How are Cisco Unified CallManager location parameters used?
A. Assign directory numbers to devices as they connect to the IP telephony network.
B. Specify the bandwidth used for audio and video calls.
C. Implement call admission control in a centralized call processing deployment.
D. Provide alternate call routing when the primary call path is unavailable.
Answer: C
NEW QUESTION 81
Which statement regarding Cisco IP voice media streaming application is correct?
A. It should be activated on the gateway in cluster that supports the TFTP service.
B. It should be activated on the gatekeeper in cluster that supports the TFTP service.
C. It should be activated on the node in cluster that does not support the TFTP service.
D. It should be activated on the node in cluster that supports the TFTP service.
Answer: D
NEW QUESTION 82
Which option describes how you add software conference bridges to Cisco Unified Communications Manager?
A. By adding a Cisco Unified CM server to the cluster.
B. By adding a software conference bridge using Conference Bridge Configuration.
C. By installing DSP to a Cisco Unified CM server.
D. By reassigning other media resources to conference resources.
Answer: A
NEW QUESTION 83
Which of these media resources can be configured in Cisco Unified Communication manager? (Choose Three)
A. MOH Server
B. Voice Termination Point DSP
C. Transcoder
D. Auto Attendant
E. Conference Bridge
Answer: ACE
NEW QUESTION 84
What is the relationship between a Region and a Location?
A. The Region codec parameter is used between a Region and its configured Locations.
B. The Region setting for a Location sets the number of audio and video calls that Location can support.
C. The codec parameter configured in the Region is only used between Regions and Location bandwidth isonly used between Locations.
D. The Region codec parameter is combined with Location bandwidth when communicating with otherRegions.
Answer: C
NEW QUESTION 85
……
BTW, These New 300-070 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-070 Dumps In PDF And VCE From โ http://www.passleader.com/300-070.html
Good Luck !!!
New 300-085 Exam Questions and Answers Updated Recently:
NEW QUESTION 61
Which CCC action applies only to the Cisco TelePresence MPS Series?
A. block fast update requests
B. Status Duo Video
C. move back
D. release floor
Answer: A
NEW QUESTION 62
Which protocol is prioritized by Cisco TMS for conferencing?
A. SIP
B. MGCP
C. H.323
D. SCCP
Answer: C
NEW QUESTION 63
How does Cisco TMS set up a call with an endpoint that is registered with Cisco Unified Communications Manager and that is connected to Cisco VCS?
A. Cisco TMS uses an IP dialing plan.
B. Cisco TMS uses a SIP trunk.
C. Cisco TMS removes the top-level domain from calls that go through Cisco Unified Communications Manager.
D. Cisco TMS drops the call, because it can verify that the trunk between Cisco Unified Communications Manager and Cisco VCS is down.
Answer: B
NEW QUESTION 64
On Cisco TelePresence Management Suite, which two call control devices are supported for call control and setup? (Choose two.)
A. Cisco Unified Communications Manager Express
B. Cisco TelePresence Video Communication Server
C. Cisco Unified Border Element
D. Cisco Unified Communications Manager
E. any SIP-capable call control system
Answer: BD
NEW QUESTION 65
Which three are valid system connectivity statuses for systems that are automatically added to Cisco TelePresence Management Suite? (Choose three.)
A. Inaccessible
B. Failed
C. Connected
D. Reachable on Public Internet
E. Behind Firewall
F. Online
G. Remote Site
Answer: ADE
NEW QUESTION 66
To have a Provisioning menu section available on Cisco TelePresence Management Suite, what must you do?
A. You must configure an active ISDN zone.
B. You must install Cisco TelePresence Management Suite Provisioning Extension and activate it on the system.
C. You must license Cisco TelePresence Management Suite Analytics Extension.
D. You must set up Cisco TelePresence deployment to support Cisco CMR Hybrid.
Answer: B
NEW QUESTION 67
Which two actions must you take to enable provisioning on Cisco TMS and Cisco VCS? (Choose two.)
A. Apply a Device Provisioning option key on Cisco VCS.
B. Enable provisioning on Cisco VCS under Applications > Provisioning.
C. Configure Users, FindMe, Phonebooks, and Devices individually, as these all have different settings.
D. Configure a separate server to run provisioning extension services.
E. Ensure that a service account is able to connect.
F. Set the polling intervals on Users, FindMe, Phonebooks, and Devices to the same value, in order for the synchronization to work.
Answer: AE
NEW QUESTION 68
What must you do to activate the provisioning feature on a Cisco VCS endpoint?
A. Install the Device Provisioning option key.
B. Set a SIP trunk between Cisco VCS and Cisco Unified Communications Manager.
C. Add the Cisco VCS on the Cisco TMS, and enable Cisco Extension Mobility.
D. Install Cisco VCS Starter Pack Express.
Answer: A
NEW QUESTION 69
Refer to the exhibit. Which statement about the jabber-config.xml partial output is true?
A. 10.255.10.10 is the LDAP server address.
B. The client connects to the directory server by using SSH.
C. 10.255.10.10 is the Cisco Unified Communications Manager IM and Presence Service address.
D. The client connects to the directory server by using HTTPS.
Answer: D
NEW QUESTION 70
The UDS for contact resolution is enabled in the service profile configuration of the Cisco Unified Communications Manager. Which action can you execute with your Jabber Desktop?
A. modify users
B. search users
C. change users
D. delete users
Answer: B
NEW QUESTION 71
Which profile must you add to an end user record, if the end user wants to access voicemail and wants to control a deskphone via CTI with Cisco Jabber?
A. remote destination profile
B. device profile
C. SIP profile
D. service profile
E. phone service
Answer: D
NEW QUESTION 72
……
BTW, These New 300-085 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-085 Dumps In PDF And VCE From โ http://www.passleader.com/300-085.html
Good Luck !!!
New 300-080 Exam Questions and Answers Updated Recently:
NEW QUESTION 76
Phone A is able to dial the directory number of Phone B and complete a call. However, when Phone B dials the directory number of Phone A, Phone B receives a fast-busy tone. What is causing this issue?
A. Phone A and Phone B are in different partitions.
B. Phone B does not have Phone A in its partition.
C. Phone B is not in the CSS of Phone A.
D. Phone B does not have the CSS of Phone A in its partition.
E. Phone B is not registered.
F. Phone B has the incorrect CSS to dial Phone A.
Answer: F
NEW QUESTION 77
An inbound call from the PSTN is not reaching the directory number that it is calling. When the PSTN phone calls the correct DID, only a dial tone is heard. Which command resolves this issue?
A. (config-dial-peer)#direct-inward-dial
B. (config-controller)# no provide-outside-dialtone
C. (config-if)#no dial-tone
D. (config-dial-peer)# no dial-tone
E. (config-if)#direct-inward-dial
F. (config) allow inbound dial-peer 1
Answer: A
NEW QUESTION 78
When a caller dials 9 plus an external seven-digit number, the caller hears a fast-busy tone after a period of silence. What is causing the silence?
A. There is no dial route for 9XXXXXXX on Cisco Unified Communications Manager.
B. The gateway is not dropping the leading 9, and the PSTN fails.
C. The T302 timer is waiting to expire.
D. The caller does not have the PSTN partition in the CSS.
E. The caller dialed the wrong number.
F. To dial successfully, the caller must enter a Forced Authorization Code.
Answer: C
NEW QUESTION 79
In a single-site deployment model, the internal endpoints are unable to dial from one to the other. What are two possible causes? (Choose two.)
A. The PSTN gateway is not configured.
B. The called endpoint does not have the SIP trunk enabled.
C. The called endpoint is not registered.
D. The calling endpoint is not in the CSS of the called endpoint.
E. The called endpoint is not in the partition of the calling endpoint.
F. The calling endpoint is not configured for the correct CoS.
Answer: CF
NEW QUESTION 80
What is the default interval for SAF hello packets?
A. 15 seconds
B. 15 seconds on links with speeds that are slower than T1 speeds
C. 40 seconds
D. 40 seconds onlinks with speeds that are slower than T1 speeds
E. 60 seconds
F. 60 seconds onlinks with speeds that are slower than T1 speeds
Answer: F
NEW QUESTION 81
Which configuration can be dynamically set using the Cisco Unified Communications Manager Device Mobility feature?
A. phone model and protocol
B. SRST reference and directory number
C. CSS and local gateway
D. partition and CSS
E. media resources and permanent bridges
Answer: C
NEW QUESTION 82
Which configuration is required on Cisco TelePresence Server, in order to support 1080p resolution?
A. Screen licenses must be configured.
B. Cisco TelePresence Server must be in remotely managed mode.
C. Cisco TelePresence Server must be in HD mode.
D. Cisco TelePresence Server must be configured with Cisco TelePresence Conductor.
E. Cisco TelePresence Server must be in Full HD mode.
Answer: E
NEW QUESTION 83
A user is dialing an external PSTN number with a prefix of 01 from a Cisco TelePresence SX10 Quick Set in a Cisco VCS environment. In the past, the Cisco VCS and the ISDN gateway were correctly configured with a prefix of 01, but the calls are now failing. What are three possible causes? (Choose three.)
A. The Cisco VCS Control is down.
B. The interworking setting is turned off.
C. The audio feature in the Cisco TelePresenceSX10 is turned off.
D. The SIP trunk is not configured on the gateway.
E. 01 is not a valid prefix.
F. ISDN is not enabled on the Cisco TelePresenceSX10.
G. The Cisco TelePresenceSX10 is not registered to the Cisco VCS Control.
H. The Cisco TelePresenceSX10 is not registered to the Cisco Express C.
Answer: ABG
NEW QUESTION 84
When the command utils dbreplication status is executed on the Cisco Unified Communications Manager CLI, which step should be taken next to check the database replication status?
A. View the activelog file.
B. Run the same command on all nodes of the cluster.
C. Restart the Cisco CallManager service.
D. The command utils dbreplication runtimestate must be run on the publisher.
E. The command utils dbreplication runtimestate must be run on the subscriber.
Answer: A
NEW QUESTION 85
Which tool can you use to see SAF advertisements in Cisco Unified Communications Manager?
A. Cisco Unified Real-Time Monitoring Tool
B. show eigrp neighbors command
C. debug eigrp commands
D. Terminal Monitor
Answer: A
NEW QUESTION 86
URI dialing is enabled between two clusters with the default options. The engineer that set up the URI dialing verified that all was working properly. However, a user from one of the clusters cannot dial using URI to a user in the same cluster. What do you do to resolve this issue?
A. Verify the password that is used by the authentication under Intercluster Lookup Service configuration.
B. Find out if the URI address of the called user has a capital letter in the URI string.
C. Verify that Intercluster Lookup Service is set up correctly.
D. Verify USN Data Synchronization Status.
Answer: B
NEW QUESTION 87
……
And, These New 300-080 Exam Questions Were Updated By PassLeader, You Can Get The Newest 300-080 Dumps In PDF And VCE From โ http://www.passleader.com/300-080.html
Good Luck !!!
Has anyone recently tested on 210-065?
any body pass 210-060 ?
which dumps is valid
@Anon GE, thanks a lot!!!
All those new 300-070 questions were appeared in my today’s exam, which are all available in PassLeader 300-070 dumps now! (http://www.passleader.com/300-070.html)
I took exam this morning, and passed with 962/1000 points!
Thanks, ALL!
Took 300-070 exam today, got many new questions same as lead2pass 145q, it looked that cisco has updated the 300-070 exam. Passed with the newest 300-070 exam questions, scored 960/1000.