Share your CIPT1 v8.0 Experience

@ Sergy, kindly send new passleader exam on thanzi.mphephu@gmail .com

@regi – a is correct.
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Cisco-VCS-SIP-Trunk-to-Unified-CM-Deployment-Guide-CUCM-8-9-10-11-and-X8-7.pdf

Actually C can also be a valid answer.

“Configure a SIP route pattern that tells Unified CM that anything with, for example, a domain vcs.domain needs to be sent down the VCS SIP trunk. This is required to permit dialing from endpoints that support SIP URIs with domains, and also for enabling the reverse path to the VCS for certain signaling.”

Hi Guys,

If anybody has updated dumps please share me on namrata15151 at g mail dot com

Gents, anyone with a brief explanation of this question:

A customer recently installed a Cisco TelePresence MCU 5320. The customer wants a virtual meeting room that restricts participants from communicating before the customer joins the call. Which feature in the MCU enables this functionality?
A. Floor and chair control.
B. Numeric ID.
C. PIN codes. <<<< CORRECT
D. Owner.

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

+1

Hi,

i got the VCE Plus 300-070 309q vce file

Please donate
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=DQK9EHBA7D9VS

sure, lets all send to anon internet guy who says he has a file, what could possibly go wrong

I have some tactical question:

Some dumps have answers wich are obviously wrong. For example:

Which result of this translation rule is true?

Voice translation-rule 1
rule 1 /.*/ /1234/

A. 1234 is translated to 123.
B. 1234 is prepended to original dialed number.
C. Any dialed digits are translated to 1234.
D. 1234 is translated to 234.

Correct Answer: B > But I think it must be C

or

CSS1 is assigned to the IP phone that Bob uses. Which matched route pattern allows Bob to place calls to
3330?

CSS1

A
1XXX
2XXX
3XXX

B
3XXX
2XXX
1XXX

C
1111
2222
3333

D
3333
2222
1111

A. Partition A, 3XXX
B. Partition C, 3333
C. Partition D, 3333
D. Partition B, 3XXX

Correct Answer: C > But I think it must be B

Should I tick the anwer of the dump or the correct one in real live.

I had my exam yesterday and failed because of 75 points. There ary many questions like in the dumps with 3xx questions but there were about 5 new one with extension mobility and video.

@WObble, you’re right. There are a lot of wrong questions in the dump. The correct answers for the questions are “C” and A”. Did you remember any of the new questions?

There was one question that when a user logs out with extension mobility becomes an error message and what is the cause. But I find no dump with this question.

Why “A” with the css question? It should be B > neares first match. Or is this wrong?

As I remember from the past this is “normal” that there are some wrong answers in the exams.

@sippbx

Somebody corrected that question and his answer is B. Numeric ID. I forgot his explanation but you can find it here about 5 pages ago or less.

Will take the exam next week. I’ll try to recall if there are any new Qs.

Goodluck to all.

@Wobble, because you are dialling 3330 (it’s not stated 333X), you cannot match 3333 RP.

@CP6941, this is the answer for the following question?

The customer wants a virtual meeting room that restricts participants from communicating before the customer joins the call. Which feature in the MCU enables this functionality?

and how its even possible to have EM questions once EM its not pointed to the exam topics for 300-070-?

@sipped: Good question. But it was so.

regarding the CSS question:

CSS1

A
1XXX
2XXX
3XXX

B
3XXX
2XXX
1XXX

It is A because CUCM looks top down and there is A the best partition.

Did u remember any other new questions?

no sorry. It was not to much new. I think the problem is that there some errors in the dump.

I bought a new file with 366q and found a file from pass-keys.com with 345q. It is named 642-447 but it has been updated in January 2019… Not sure if it is correct…

You used thr passleaders 305Q? As i told you there are a lot of wrong questions there – around 20

what is you recommendation?

I found this: https://www.pass-keys.com/exam/642-447-implementing-cisco-unified-communications-manager-part-1-v8-0-cipt1-v8-0/

Any explanation to this question:

Which Cisco TelePresence Server mode can be deployed as a stack of two units to supports a maximum of 20 FHD screen licenses?

– Cisco TS on MM 310
– Cisco TS on MM 320
– Cisco TS on MM 820
– Cisco MSE 8710

The dump says Cisco MSE 8710, but I think it should be MM 320 based on the dataseheet, release notes and datasheet. Any tips?

So, I have got an 309q file wich is editable and testable with the old VCE Exam Suite. There is a password in it. I will try to remove that…

@WObbie, from where this 309Q dump is? Could u please share it? Or just copy the new questions which are newer rather than PL305Q. Thanks!

what do you need? VCE or PDF?

Also strange:

How many licenses do you need to operate three calls to 480p30 Audio Stereo, using Cisco TelePresence Server on Virtual Machine 3.1?

dump says 1/4 but regarding the screenshot you need thre times the 1/3 licence so it will be 1 licence

1 is the correct answer. From where you get this 309Q dump? Share it in both options – VCE and PDF somewhere in dropbox or google. Thanks!

Here you go: https://workupload.com/file/VTxYG8CY

Also different:

When using video in the Cisco Unified Border Element, which RTP flow offers no protection from the
address hiding perspective?
A. Early offer
B. Delayed offer
C. flow-around
D. flow-through
Answer:C – in my dumps it is “A”

@sipPbx

The dump says Cisco MSE 8710, but I think it should be MM 320 based on the dataseheet, release notes and datasheet. Any tips?

There was a question from the old dumps that FOUR MSE8710 blades cluster that can support 48FHD (assuming this is the correct answer). It means each blade cluster can cater 12 FHD. Going back to your question, two units of 8710 can support 20 FHD. So 8710 is a viable option.

@WObble

Thanks for the updated dump file. I’d like to ask regarding the question on CSS and Partitions (3XXX) etc.. Is it by default that the Call Manager looks at the CSS’s paritions by top down? I’ve checked CSS configuration page but there are no algorithms like those in Route list and hunt list.

@sipPbx

The dump says Cisco MSE 8710, but I think it should be MM 320 based on the dataseheet, release notes and datasheet. Any tips?

There was a question from the old dumps that FOUR MSE8710 blades cluster that can support 48FHD (assuming this is the correct answer). It means each blade cluster can cater 12 FHD. Going back to your question, two units of 8710 can support 20 FHD. So 8710 is a viable option.

@WObble

Thanks for the updated dump file. I’d like to ask regarding the question on CSS and Partitions (3XXX) etc.. Is it by default that the Call Manager looks at the CSS’s paritions by top down? I’ve checked CSS configuration page but there are no algorithms like those in Route list and hunt list.

Please put more new questions here so we can discuss and verify answers. Goodluck to all 🙂

@sipPbx

The dump says Cisco MSE 8710, but I think it should be MM 320 based on the dataseheet, release notes and datasheet. Any tips?

I read the question again and it is stated ‘to support a maximum of 20..’ so I’d say MM 320 is the better choice.

This may be also new:

How many TelePresence MCU conference bridges can be configured in one conference bridge pool in a TelePresence Conductor cluster?

A. 36
B. 30
C. 1
D. 24
E. 12

CORRECT ANSWER: E > But in a another dump it is B

B could be right:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC4-2.pdf

Page 7

By the way: I will correct “my” dump” and share it after that.

I belive the correct answer is 30.

How does Cisco Unified Communications Manager perform digit analysis?
A. Use a set of route lists and filters to match all collected digits of a dialed number.
B. Perform a digit-by-digit analysis to find the best matching route pattern based on a devices partition.
C. Perform a digit-by-digit analysis to find the best matching route pattern within the partition list in the calling search space of a device.
D. Send all collected digits through the Dialed Number Analyzer to determine the best call routing match within Cisco Unified CM.

Correct Answer: D > Seems also wrong. I think it is C. DNA is only for testing, or?

Of course.

On what equipment do you configure Layer 2 to Layer 3 QoS mapping?
A. switch
B. router
C. firewall
D. Cisco Unified Communications Manager
E. bridge

A or B?

I have got a new file with more questions. Also the extension Mobility Question:

A company who implemented Extension Mobility notices that logout does not work or gives an error. Which
configuration step must be implemented to resolve this issue?
A. Subscribe the user device profile to the Extension Mobility service.
B. Phone services must be modified.
C. Modify the user profile.
D. A phone profile must be added.

Correct Answer: A

@Wobble
I’m going for A. Switch as for the QoS mapping question.

QUESTION 94
What are four features of Cisco Unified Border Element? (Choose four).
A. Protocol Interworking.
B. Bandwidth Control.
C. Admission Request.
D. Automated Alternate Routing.
E. Address Hiding.
F. Security.
G. Video Integration.

ACEF or ACFG? why?

@CP6941
CUBE acts as a demark point/security boundary (may hide addresses, negotiates VoIP parameters, etc). ACEF should be correct.

Regarding the CUBE I think the correct answers are AEFG.

Regarding the EM question, why “A”. If you are not subscribed to EM service you won’t be able to login to EM.

@WObbie, share another new questions please.

Sorry for the SPAM guys. @Wobbie, you are right – the correct answer for the EM question is “A”.

QUESTION 310
Which feature allows users to use the same set of patterns to route calls out of their local gateways?
A. standard local route group
B. route list
C. SIP trunking
D. intercluster trunk
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:

QUESTION 311
You want to integrate MCU with Cisco Unified Communications Manager. How do you configure MCU in
Cisco Unified Communications Manager?
A. MCU is configured in Cisco VCS only.
B. Media Resource > Conference Bridge > Cisco IOS Heterogeneous Video Conference Bridge
C. Media Resource > Conference Bridge > Cisco IOS Homogenous Video Conference Bridge
D. Media Resource > Conference Bridge > Cisco TelePresence MCU
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:

QUESTION 312
Which two phone states must contain the mobility softkey for the Cisco Mobile Connect feature? (Choose
two.)
A. on hook
B. on hold
C. off hook
D. ring in
E. connected
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
Reference: https://community.cisco.com/t5/collaboration-voice-and-video/mobile-connect-configuration/
tap/3122512

QUESTION 313
You want to set up a Cisco TelePresence Server 8710 cluster. Which statement is true?
A. All blades in a cluster must be running the same version of software.
B. Up to four blades can be clustered in version 2.2.
C. The administrator can mix the type of blades in the cluster.
D. The support key can be installed in a single blade during the implementation.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/deployment_guide/
Cisco_TelePresence_Server_Deployment_Guide.pdf page 37.

QUESTION 314
In which scenario can a software conference bridge from Cisco Unified Communications Manager be used
for an audio conference?
A. when all participants use the G.711 codec
B. when there are only three participants
C. when all participants use both the G.711 and G.729 codecs
D. when only SCCP phones are used
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:

QUESTION 315
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a
phone? (Choose two.)
A. on a softkey configuration
B. on the phone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:

QUESTION 316
You want to set up calls from endpoints registered to Cisco Unified Communications Manager to video
endpoints registered in Expressway. How do you set up the configuration in Cisco Unified CM?
A. Set up a SIP trunk
B. Create a SIP route pattern as IP address routing using the Expressway domain with destination as the
SIP trunk that points to the Expressway.
C. Create a route pattern and assign the SIP trunk that points to the Expressway.
D. Create a SIP route pattern as domain routing using the Expressway domain, with destination as the SIP
trunk that points to the Expressway.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:

QUESTION 317
When using the Dialed Number Analyzer tool, what step has to occur to ensure the most recent CUCM
configuration is analyzed?
A. dialed number analyzer server
B. database synchronization
C. directory number alias sync
D. directory number alias lookup
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 318
Which command shows a summary of the dial peers on a Cisco IOS gateway?
A. show sip dial-peer
B. show summary dial-peer
C. show dial-peer voice summary
D. show mgcp dial-peer
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:

QUESTION 319
An engineer has received a new Cisco MX200 for a remote office and wants to ensure that unauthorized
end users cannot change any settings on the MX200. Which configuration element must be configured to
prevent unauthorized changes?
A. device settings via web interface on Cisco Unified Communications Manager
B. security settings via web interface on the Expressway
C. maintenance settings via web interface on the MX200
D. user administration via web interface on the MX200
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 320
A company who implemented Extension Mobility notices that logout does not work or gives an error. Which
configuration step must be implemented to resolve this issue?
A. Subscribe the user device profile to the Extension Mobility service.
B. Phone services must be modified.
C. Modify the user profile.
D. A phone profile must be added.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 321
On a Cisco IOS voice gateway, where is the RSVP agent enabled?
A. voice classes
B. DSP farm profiles
C. dial-peer configuration
D. Ethernet interfaces
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/ios/voice/cminterop/configuration/guide/12_4t/
vc_12_4t_book/vc_rsvp_agent.pdf

QUESTION 322
Which QoS model uses RSVP to explicitly signal the bandwidth needs of real-time applications such as
remote video and multimedia conferencing?
A. DiffServ
B. Best-Effort
C. DiffServf
D. IntServ
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:

Where are these questions from? Which dump?

QUESTION 315
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a
phone? (Choose two.)
A. on a softkey configuration
B. on the phone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone
Correct Answer: CE

B and E should be the correct answers. I have a CUCM in front of me, there is no option to select calling party transformation CSS under the route pattern.

VCE+.com

It is the same with this:

Which two items can be placed in a partition in Cisco Unified Communications Manager? (Choose two.)

A. gateways
B. CSS
C. translation patterns
D. Call Pickup Group
E. SIP trunks

Correct Answer: BC

But B is definitly false. A CSS contains partitions.

You want to integrate MCU with Cisco Unified Communications Manager. How do you configure MCU in Cisco Unified Communications Manager?
A. MCU is configured in Cisco VCS only.
B. Media Resource > Conference Bridge > Cisco IOS Heterogeneous Video Conference Bridge
C. Media Resource > Conference Bridge > Cisco IOS Homogenous Video Conference Bridge
D. Media Resource > Conference Bridge > Cisco TelePresence MCU

Correct Answer: B

Should be D

Regarding the normal style of Cisco questions B could be right because it is often so that there are several answers an two of them are similar and one of them is right.

Example:
When implementing a global dial plan, which digit manipulation feature in CUCM does Cisco recommend
for adding +1 to all outbound calls?
A. Called party transformation.
B. Calling party transformation.
C. Translation pattern.
D. External phone mask.
Correct Answer: A

And in the past there were alsways technical wrong answers wich were right in the exam.

I have an MCU configured in my environment and its configured as a Telepresence MCU under the conference bridge. No logic to be B or C!

Cisco Integrated Services Routers Generation 2 (ISR G2) can act as IOS-based conference bridges that support ad hoc and meet-me video conferencing. DSP modules must be installed on the router to enable the router as a conference bridge.
Cisco IOS Homogeneous Video Conference Bridge specifies the IOS-based conference bridge type that supports homogeneous video conferences. A homogeneous video conference is a video conference in which all participants connect using the same video format attributes. All the video phones support the same video format and the conference bridge sends the same data stream format to all the video participants.

I know this is confusing but this quoestions are not made by engineers…

So it could be correct in the exam but wrong in reality.

Yes, but there are a lot of wrong answers into the dump and this one is from the list :). There is no way that B is a correct answer at all here :).

ok, than I will correct this

Any other corrections? On Monday I knew more… 😉

Your are gonna take the exam on Monday? Good luck! Please share your experience afterwards 🙂

Yes I do. Thank you. I will

@ reg

You war to set up calls form endpoint s registered to Cisco Unified Connumerations Manager to video endpoints registered in VCS. How do you set up the configuration in Cisco Unified CM?

A. Create a route pattern and assign the SIP trunk that points to the VCS.
B. Create a SIP route pattern as IP address routing with the VCS domain, and associate the SIP route pattern to the correspondent sip trunk that points to the VCS.
C. Create a SIP route pattern as domain routing with the VCs domain, and associate the SIP route pattern to the correspondent SIP trunk that points to the VCS.
D. Set up a SIP trunk.

The answer could be a or c. I think c would be the best choice because in order to send calls to VCS using a suffix you will need to use domain routing which is an option under Pattern Usage(SIP Route Pattern > Pattern Usage

https://www.cisco.com/c/en/us/support/docs/unified-communications/telepresence-video-communication-server-vcs/118884-config-vcs-00.html.

@ sippbx

Gents, anyone with a brief explanation of this question:

A customer recently installed a Cisco TelePresence MCU 5320. The customer wants a virtual meeting room that restricts participants from communicating before the customer joins the call. Which feature in the MCU enables this functionality?
A. Floor and chair control.
B. Numeric ID.
C. PIN codes. <<<< CORRECT
D. Owner.

There are two types of conference participant: chairperson and guest. IDs and PINs allow participants to connect to conferences as the correct participant type.

A conference will not begin until the first chairperson joins. This means that guests will see a black screen/hear silence with on screen text 'Waiting for conference chairperson' and an audio prompt after five seconds and then every minute thereafter.

@uccecvp, so “PIN” is the correct one?

@sippx

The answer could be numeric ID or PIN, however the PIN is optional for chairperson and guest. So I think Numeric ID would be the best option.

See Page 43 at the bottom.

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/admin_guide/Cisco-TelePresence-MCU-Series-Printable-Online-Help-4-5_1-71.pdf

MCU differentiate the user access level based on PIN number (“PIN” is for chair access and “Guest PIN” is for guest access”) entered when accessing specific conference.

This helps not really 😉

I read the document again, you are right Numeric iD seems more logical. the

QUESTION 315
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a
phone? (Choose two.)
A. on a softkey configuration
B. on the phone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone
Correct Answer: CE Should be BE
Section: (none)
Explanation
Explanation/Reference: I Just verified from CUCM

QUESTION 316
You want to set up calls from endpoints registered to Cisco Unified Communications Manager to video
endpoints registered in Expressway. How do you set up the configuration in Cisco Unified CM?
A. Set up a SIP trunk
B. Create a SIP route pattern as IP address routing using the Expressway domain with destination as the
SIP trunk that points to the Expressway.
C. Create a route pattern and assign the SIP trunk that points to the Expressway.
D. Create a SIP route pattern as domain routing using the Expressway domain, with destination as the SIP
trunk that points to the Expressway.
Correct Answer: A or D? Somebody explained here that D is also correct. Clarify please
Section: (none)
Explanation
Explanation/Reference:

Which two items can be placed in a partition in Cisco Unified Communications Manager? (Choose two.)

A. gateways
B. CSS
C. translation patterns
D. Call Pickup Group
E. SIP trunks

Correct Answer: BC. Should be CD

QUESTION 109
Which QoS model is bandwidth-dedicated to provide sufficient quality for applications that need high
resolution, such as video terminals?
A. Best-Effort
B. IntServ
C. DiffServ
D. DiffServf
Correct Answer: C SHould be B
Section: (none)
Explanation
Explanation/Reference:

QUESTION 122
Which two options can a route pattern be assigned? (Choose two)
A. A gateway that is assigned to a route group.
B. A route list with one or more route groups configured.
C. A gateway that is not assigned to a route group.
D. A route list with no route groups configured.
Correct Answer: AD Should be BC
Section: (none)
Explanation:

I take the test tomorrow. I will provide feedback afterwards. I created an outline based off the exam objectives and have been reviewing primarily from that.

Q122: Yes

Q109: Why do you think so?

By the way: In the exam there are 71q you have to answer.

QUESTION 242
How many TelePresence MCU conference bridges can be configured in one conference bridge pool in a
TelePresence Conductor cluster?
A. 36
B. 30
C. 1
D. 24
E. 12

Correct Answer: B

In the past it was 12. Is B correct?

Should be “B”. Check page 8.

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC4-2.pdf

QUESTION 99
Which three types of devices can you test with the Cisco Unified Communications Manager Dialed Number
Analyzer tool? (Choose three)
A. Fax/Modem.
B. Trunks.
C. Gateways.
D. Cisco ASA Adaptive Security Appliances.
E. Cisco Catalyst Switches.
F. Phones.
Correct Answer: BCF

I think it is ACF

QUESTION 255
When configuring Cisco Unified Communications Manager, which configuration enables phones to
automatically register to a Cisco Unified Communications Manager publisher when the connection to the
subscriber is lost?
A. SRST
B. Device Pool
C. Cisco Unified CM Group
D. Route Group
Correct Answer: A

Should also be C, because SRST is not a publisher….

Q99:BCF
Q255: C

q99: Why BCF? In the Q196 it is the similar type of question.

QUESTION 196
Which three devices are analyzed by the Cisco Unified Communications Dialed Number Analyzer? (Choose
three.)
A. gatekeeper
B. remote destination
C. CTI route point
D. trunks
E. phones
F. gateways
Correct Answer: DEF
Section: (none)
Explanation
Explanation/Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/8_6_1/dnaguide/dnaan.html#wp 1227993

Because I have a CUCM in front of me and these are the options.

@ Wobble if you don’t have access to CUCM….google cisco sandbox go to collaboration area and activate a CUCM environment. It’s free and you can use it repeatedly. sippbx is correct with his answer.

You will need to download anyconnect so that you can vpn into their network. I was able to use the lab area a few months ago and test jabber on mobile devices and ipads.

QUESTION 99

Correct is BCF

Anyone who passed the exam recently to share an experience?

QUESTION 234
An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two
markings can be used for voice traffic? (Choose two.)
A. dscp ef
B. cos 6
C. ip precedence 5
D. dscp 5
E. cos 4
F. ip precedence 3
Correct Answer: CF

Not AF?

A and C.

QUESTION 219

Drag and Drop

In Cisco Unified Communications Manager profiles and templates can be assigned to both device pools and IP Phones. Drag the appropriate profile and template from the left and drop it under the correct location on the right. Some options may be used more than once.

Select and Place:

DEVICE PROFILE

date time group
locations
regions

IP PHONE
common phone profile
locations
device securty session

NOT USED

enterprise phone configuration

++++++++

Is that correct?

It should be Device Pool instead of DP. The order seems correct.

Question 234

I mean CF because the Question asked for Voice Traffic. It is the RTP and Signalling Traffic. RTP ist 5 und Signalling 3. So i mean CF is correct

QUESTION 246
Which action does the urgent priority flag take when set on a route pattern?
A. It waits for all digits to be collected.
B. It waits for inter-digit timeout.
C. It makes the user enter a FAC code.
D. It routes the call immediately.
Correct Answer: A
Not D?

QUESTION 58
Which three commands show the output of an active video call? (Choose three.)
A. show vrm active_calls
B. show call active video brief
C. show voip rtp connections
D. show voice call
E. show voice call summary
F. show video dsp
Correct Answer: BCE

QUESTION 280
Which two commands show the output of an active video call? (Choose two.)
A. show video call summary
B. show vrm active_calls
C. show video dsp
D. show call active video brief
E. show voice call
Correct Answer: AD

of course its D.

CCNp, link below table 5-1:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/design/guides/videodg/vidguide/qos.pdf

@sipxpbx:
so q234 ist CF, not D

Check the link above.

Cisco Unified Communications Manager (Unified CM) supports endpoints that mark QoS for their media packets. Voice packets are marked as EF (DSCP value 46), while video devices mark media packets as AF41 (DSCP value 34) and TelePresence endpoints mark their traffic as CS4 (DSCP value 32). All call signaling is marked as CS3 (DSCP value 24).

My choice will be A and C

Anyone with a explanation of this one:

– Which option can be determined from this output?
A. the CSS name applied is “US_C”
B. A device CSS has not been applied
C. A line CSS has not been applied
D. Line and device CSS are applied

Dump: D but i doubt between D and A?

@sipXpbx which Dump you use ? I have never seen this question

Spotto.

https://imgur.com/a/qCYl4cA.

I doubt between D and A.

Oh, No. The Spam bots are Back…

QUESTION 294
An engineer is modifying a dial plan for a Cisco Unified Communications Manager system and notices that
the new route patterns are not properly manipulating the dial string. Which configuration element must the
engineer check to determine the cause?
A. phone
B. route list
C. dial peer
D. phone DN
Correct Answer: C

Which one is correct?

QUESTION 297
An engineer is configuring a dial plan for inter-cluster calling using H.323. Which two configuration elements
are needed to implement calling between two Cisco Unified Communications Manager clusters? (Choose
two.)
A. route pattern
B. transformation pattern
C. H.323 gateway
D. H.323 trunk
E. translation pattern
Correct Answer: CD

A and C?

QUESTION 303
Which do you add to your Cisco Unified Communications Manager dial plan if you want to match any E.164
number string?
A. +!
B. =+!
C. \*+
D. \+!
Correct Answer: A

How about D?

Anyone has spoto latest dump for 300-070 ?

Q297: A and C
Q303:: A
Q294: I think B. Ni sense for C

Q303: Sorry D is the correct one.

Q 294, it could be C. The dial-peer could have the forward digits, no digit strip, or prefix under the dial peer configuration which would modify the dial string after before it hits the PSTN.

not after, but before

Passed… 88x/839p 300-070

Questions out of the 322q dump. Some answers are shuffled in the exam

Same questions as last time, as far as I remember:

20
31
34
52
62
66
84
87
100
108
122 one answer option was only “a gateway” think there is missing something, I didn´t picked that choice
158
165
167
168
175
177
181
182
185
189
191
223
231
233
234
235
239
242
245
247
251
255
256
266
267
272
273
274
275
279
280
282
286
295
296 one answer option was with 1234. at the end, I picked that. I think it was A
298
299
300
302
303
304
306
308
311
312
313
314
315
317
318
319
320
322

No guaranty that it is always the same…

@W0bble – congratulations on passing the first, more luck to you in the future.

How many new questions did u face? Do u remember any?

ucce, the question ask for CUCM and route patterns, there is no gateway state here.