I heard that Cisco’s switching the exams almost monthly nowadays. Anybody has used WObble’s guide recently and can confirm validity? Thanks!
kayy
April 14th, 2019
hi guys,, could you share dump for 210-060 210-060 Implementing Cisco Collaboration Devices (CICD)
Sally Jenkens
April 15th, 2019
Congratulations!!!
Passed 300-070 exam on 12/April/2019 with 9xx.
PassLeader 305q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing!
BTW, anyone kindly share the PassLeader 300-080 dumps with 326q?
Thanks a lot!
Asok
April 16th, 2019
just passed my exam WObble dump is still valid.
mohiuddin
April 16th, 2019
Asok, was there any new questions? for 300-070?
Mohiuddin
April 16th, 2019
Asok , was there any new question other than Wobble dump?
lamonayon
April 16th, 2019
Asok – thank you for the feedback! No new questions?
mohiuddin
April 18th, 2019
Asok can you confirm if there was any new quesiton other than wobbie dumps.
did anybody wrote the exam and find new quesitons?please reply
mohiuddin
April 19th, 2019
wroted today again failed, 10 new questions again, otherthan wobbie dump
lamonayon
April 19th, 2019
mohiuddin – apart from the 10 new questions, were they all on Wobble’s dump? What are the new questions by the way? Thank you!
mohiuddin
April 19th, 2019
yes for 300-070 mostly from WOBBIE Dump. Apart from 10 to 12 new quesitons. got
803 missed by 33 more , this was my second attempt
lamonayon
April 20th, 2019
Thanks, mohiuddin! The new questions are more labs or what?
mohiuddin
April 20th, 2019
its more about commands and something new questions which i have never seen.
ben
April 24th, 2019
Recently passed this exam 300-080 using spoto177 dated 4/19 and got 2 new questions more; trying to recover cost. If you want to share it with, i can offer it at 30 USD, email me at benvaras2 at Gmail com
Arnold
April 26th, 2019
Passed the exam 300-070 today, thanks to WOBBIE Dump
10 to 12 new questions related more in VCS and show commands
NEW QUESTION 296
An endpoint cannot connect to a valid TFTP server during the registration process. Which two statements describe possible causes? (Choose two.)
A. The DHCP configuration contains TFTP server 66, but no DNS server is available.
B. The DHCP configuration contains TFTP server 150, but no DNS server is available.
C. No separate voice VLAN configuration on the switch port connected to the endpoint.
D. Cisco Unified Communications Manager CallManager services are not started.
E. Cisco Unified Communications Manager TFTP services are not started.
Answer: DE
NEW QUESTION 297
An engineer is troubleshooting an intersite call between two endpoints where calls are intermediately failing with the error message: “488 Not Acceptable Media”. Which option causes this error message to trigger?
A. The device pool contains more call processing agents in the CMG group than the endpoint can support.
B. MRGL contains more media groups than the endpoint can support.
C. A lower bandwidth is set in the location than the endpoint can support.
D. The hunt group contains more devices than the endpoint can support.
Answer: C
NEW QUESTION 298
You are troubleshooting an ILS connectivity issue. All clusters are set to “Use TLS Certificates”. Which certificates must be exchanged between Cisco Unified Communications Manager clusters?
A. Tomcat certificates between all nodes in all clusters.
B. TLS certificates between publisher nodes in all clusters.
C. Call Manager certificates between publisher nodes in all clusters.
D. Tomcat certificates between publisher nodes in all clusters.
Answer: D
NEW QUESTION 299
An engineer is analyzing an issue about system connection under Cisco TMS connection, where endpoints handled by TMS automatically change from reachable on LAN to behind the firewall status. Which protocol does the network engineer need to troubleshoot the network between managed device Cisco TMS?
A. SDP
B. XMPP
C. FTP
D. HTTP
Answer: D
NEW QUESTION 300
Which two types of call causes the user to hear the reorder tone? (Choose two.)
A. call to a number that is working but is unlisted
B. restricted call
C. call using a non-Cisco phone
D. call to a number that has been blocked
E. unrestricted call
Answer: AB
NEW QUESTION 301
Replication is failing between the Cisco Unified Communications Manager Publisher and Subscriber servers. In which two ways can you verify the database replication status? (Choose two.)
A. TRACERT
B. CLI
C. APIC-EM
D. PING
E. RTMT
Answer: BE
NEW QUESTION 302
An engineer is investigating voice quality degradation on calls passing through a particular SIP gateway. To gather the necessary information, sample traffic captures are taken. Which information in the capture reveals the problem?
A. destination port
B. version
C. ToS bits
D. MTU
Answer: B
NEW QUESTION 303
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they are happening?
A. RTMT real-time trace
B. Cisco Unified Dialed Number Analyzer
C. Syslog output
D. RTMT performance log viewer
Answer: B
NEW QUESTION 304
An engineer is troubleshooting an issue where aliases that contain an identity “@abc.com” are unable to register with an endpoint due to an entry in the registration restriction configuration in Expressway-E. Where is the alias being blocked in Expressway-E?
A. regex list
B. hunt list
C. black list
D. allow list
Answer: C
NEW QUESTION 305
Which two statements about Cisco Unified CM location bandwidth deduction are true? (Choose two.)
A. If a call uses G.711, Cisco Unified Communications Manager subtracts 64k.
B. If a call uses G.711, Cisco Unified Communications Manager subtracts 80k.
C. If a call uses G.723, Cisco Unified Communications Manager subtracts 16k.
D. If a call uses G.729, Cisco Unified Communications Manager subtracts 16k.
E. If a call uses G.729, Cisco Unified Communications Manager subtracts 24k.
Answer: BE
NEW QUESTION 306
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two.)
A. An H.323 SAF trunk was configured instead of a SIP SAF trunk.
B. No directory number patterns were configured on the Cisco Unified Communications Manager.
C. CCD advertising service was not activated.
D. Incorrect user credentials were used on the SAF Forwarder.
E. CCD requesting service was not activated.
Answer: DE
NEW QUESTION 307
Company XYZ reports that their SAF calls are being routed through the PSTN. Which cause of the issue is true?
A. TCP Connection Failure has occurred between the SAF Forwarder and Cisco Unified Communications Manager.
B. Cisco Unified Communications Managed did not increment the service number correctly.
C. The maximum number of learned patterns have being reached.
D. Cisco Unified Communications Manager did not construct the SAF message correctly.
Answer: A
NEW QUESTION 308
Which action can you take to prevent users from transferring external calls to external devices?
A. Enable the Block OffNet to OffNet Transfer feature in Cisco Unified Communications Manager.
B. Block the National route pattern.
C. Remove the route pattern to prevent inbound calls from matching the gateway.
D. Create a new translation pattern to block external call transfer.
Answer: A
NEW QUESTION 309
Which CLI command is used to troubleshoot ILS network connection issues within the local Cisco Unified CM cluster to determine which server within the cluster is the xnode?
A. utils ils lookup
B. utils ils showpeerinfo
C. utils ils display xnode
D. utils ils find xnode
Answer: D
NEW QUESTION 310
After you deploy a new Cisco Collaboration solution, users report echoes and choppy voice quality. Which two actions correct the problem? (Choose two.)
A. Upgrade the Cisco IOS version and flash memory on the Cisco IOS router.
B. Deploy additional hardware resources.
C. Deploy an echo canceller.
D. Upgrade Cisco Unified Communications Manager.
E. Enable QoS on the network.
Answer: CE
Full Authentic Dumps.
April 29th, 2019
I passed my exam yesterday with 97x/1000 score.
Dump is very reliable and stable.
All questions was from dumps no need to learn more
NEW QUESTION 305
Which two statements about Cisco Unified CM location bandwidth deduction are true? (Choose two.)
A. If a call uses G.711, Cisco Unified Communications Manager subtracts 64k.
B. If a call uses G.711, Cisco Unified Communications Manager subtracts 80k.
C. If a call uses G.723, Cisco Unified Communications Manager subtracts 16k.
D. If a call uses G.729, Cisco Unified Communications Manager subtracts 16k.
E. If a call uses G.729, Cisco Unified Communications Manager subtracts 24k.
Answer: BE
NEW QUESTION 306
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two.)
A. An H.323 SAF trunk was configured instead of a SIP SAF trunk.
B. No directory number patterns were configured on the Cisco Unified Communications Manager.
C. CCD advertising service was not activated.
D. Incorrect user credentials wdwere used on the SAF Forwarder.
E. CCD requesting service was not activated.
Hi guys,
Any one has updated Dumps for any of the following exams?
300-070
300-075
300-080
300-085
Kindy let me know if you have.
Jake
May 3rd, 2019
Any one passed 300-070 exam?
I’m not sure Wobbie dump is enough to pass or do you have any update dumps?
Psd
May 5th, 2019
Hi all,
Do you have any update for new 15 questions of 300-070 exam?
Jan
May 5th, 2019
Passed, the itlibraries ones are valid 😀
Wobbie dumps is very good don’t know exactly how many questions were from it since I focused on the itlibraries ones.
[(copy those links and open them in your web browser!!!)]
Jake
May 6th, 2019
Share some new questions. It about 15 new questions almost about VCS .I just remember a few new questions:
1. Time slot of T1 -> 31 32 23 24 . I chose 24.
2. Which two options list the transcoder types that Cisco Unified Communications Manager supports?
IOS enhanced media termination point
virtual media termination point
PLDM
hardware ..
I chose IOS enhanced media termination point & hardware …
Kindly share more new questions that you have remember.
Anonymous
May 6th, 2019
NEW QUESTION 296
An endpoint cannot connect to a valid TFTP server during the registration process. Which two statements describe possible causes? (Choose two.)
A. The DHCP configuration contains TFTP server 66, but no DNS server is available.
B. The DHCP configuration contains TFTP server 150, but no DNS server is available.
C. No separate voice VLAN configuration on the switch port connected to the endpoint.
D. Cisco Unified Communications Manager CallManager services are not started.
E. Cisco Unified Communications Manager TFTP services are not started.
Answer: DE
NEW QUESTION 297
An engineer is troubleshooting an intersite call between two endpoints where calls are intermediately failing with the error message: “488 Not Acceptable Media”. Which option causes this error message to trigger?
A. The device pool contains more call processing agents in the CMG group than the endpoint can support.
B. MRGL contains more media groups than the endpoint can support.
C. A lower bandwidth is set in the location than the endpoint can support.
D. The hunt group contains more devices than the endpoint can support.
Answer: C
NEW QUESTION 298
You are troubleshooting an ILS connectivity issue. All clusters are set to “Use TLS Certificates”. Which certificates must be exchanged between Cisco Unified Communications Manager clusters?
A. Tomcat certificates between all nodes in all clusters.
B. TLS certificates between publisher nodes in all clusters.
C. Call Manager certificates between publisher nodes in all clusters.
D. Tomcat certificates between publisher nodes in all clusters.
Answer: D
NEW QUESTION 299
An engineer is analyzing an issue about system connection under Cisco TMS connection, where endpoints handled by TMS automatically change from reachable on LAN to behind the firewall status. Which protocol does the network engineer need to troubleshoot the network between managed device Cisco TMS?
A. SDP
B. XMPP
C. FTP
D. HTTP
Answer: D
NEW QUESTION 300
Which two types of call causes the user to hear the reorder tone? (Choose two.)
A. call to a number that is working but is unlisted
B. restricted call
C. call using a non-Cisco phone
D. call to a number that has been blocked
E. unrestricted call
Answer: AB
NEW QUESTION 301
Replication is failing between the Cisco Unified Communications Manager Publisher and Subscriber servers. In which two ways can you verify the database replication status? (Choose two.)
A. TRACERT
B. CLI
C. APIC-EM
D. PING
E. RTMT
Answer: BE
NEW QUESTION 302
An engineer is investigating voice quality degradation on calls passing through a particular SIP gateway. To gather the necessary information, sample traffic captures are taken. Which information in the capture reveals the problem?
A. destination port
B. version
C. ToS bits
D. MTU
Answer: B
NEW QUESTION 303
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they are happening?
A. RTMT real-time trace
B. Cisco Unified Dialed Number Analyzer
C. Syslog output
D. RTMT performance log viewer
Answer: B
NEW QUESTION 304
An engineer is troubleshooting an issue where aliases that contain an identity “@abc.com” are unable to register with awefn endpoint due to an entry in the registration restriction configuration in Expressway-E. Where is the alias being blocked in Expressway-E?
A. regex list
B. hunt list
C. black list
D. allow list
Answer: C
NEW QUESTION 305
Which two statements about Cisco Unified CM location bandwidth deduction are true? (Choose two.)
A. If a call uses G.711, Cisco Unified Communications Manager subtracts 64k.
B. If a call uses G.711, Cisco Unified Communications Manager subtracts 80k.
C. If a call uses G.723, Cisco Unified Communications Manager subtracts 16k.
D. If a call uses G.729, Cisco Unified Communications Manager subtracts 16k.
E. If a call uses G.729, Cisco Unified Communications Manager subtracts 24k.
Answer: BE
NEW QUESTION 306
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two.)
A. An H.323 SAF trunk was configured instead of a SIP SAF trunk.
B. No directory number patterns were configured on the Cisco Unified Communications Manager.
C. CCD advertising service was not activated.
D. Incorrect user credentials were used on the SAF Forwarder.
E. CCD requesting service was not activated.
Answer: DE
NEW QUESTION 307
Company XYZ reports that their SAF calls are being routed through the PSTN. Which cause of the issue is true?w3
A. TCP Connection Failure has occurred between the SAF Forwarder and Cisco Unified Communications Manager.
B. Cisco Unified Communications Managed did not increment the service number correctly.
C. The maximum number of learned patterns have being reached.
D. Cisco Unified Communications Manager did not construct the SAF message correctly.
Answer: A
NEW QUESTION 308
Which action can you take to prevent users from transferring external calls to external devices?
A. Enable the Block OffNet to OffNet Transfer feature in Cisco Unified Communications Manager.
B. Block the National route pattern.
C. Remove the route pattern to prevent inbound calls from matching the gateway.
D. Create a new translation pattern to block external call transfer.
Answer: A
NEW QUESTION 309
Which CLI command is used to troubleshoot ILS network connection issues within the local Cisco Unified CM cluster to determine which server within the cluster is the xnode?
A. utils ils lookup
B. utils ils showpeerinfo
C. utils ils display xnode
D. utils ils find xnode
Answer: D
NEW QUESTION 310
After you deploy a new Cisco Collaboration solution, users report echoes and choppy voice quality. Which two actions correct the problem? (Choose two.)
A. Upgrade the Cisco IOS version and flash memory on the Cisco IOS router.
B. Deploy additional 3fw3fhardware resources.
C. Deploy an echo canceller.
D. Upgrade Cisco Unified Communications Manager.
E. Enable QoS on the network.
Answer: CE
Dumps for all
May 6th, 2019
I passed my exam yesterday with 97x/1000 score.
Dump is very reliable and stable.
All questions was from dumps no need to learn more
NEW QUESTION 303
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they are happening?
A. RTMT real-time trace
B. Cisco Unified Dialed Number Analyzer
C. Syslog output
D. RTMT performance log viewer
Answer: B
NEW QUESTION 304
An engineer is troubleshooting an issue where aliases that contain an identity “@abc.com” are unable to register with awefn endpoint due to an entry in the registration restriction configuration in Expressway-E. Where is the alias being blocked in Expressway-E?
A. regex list
B. hunt list
C. black list
D. allow list
Answer: C
ben
May 7th, 2019
Recently passed exam 300-080 using latest spoto177 dated Apr/19 (mht file) and got 2 new questions more; trying to recover cost. If you want to share it with, i can offer it at 30 USD, email me at benvaras2 at Gmail com
passhot dot com
May 9th, 2019
Hi,guys valid dumps，look my name
mohiuddin
May 10th, 2019
passhot, for which exam code
Jake
May 11th, 2019
I passed 300-070 yesterday with 938/1000
About 15-20 new questions that Wobbie dumps not cover.
New questions ask about all topic related with dial plan, VCS, media resource, T1, Command on GW to connect with CUCM via PRI, tool for collect trace path.
Anonymous
May 12th, 2019
I have bought 300-070 Spoto dump 192q and need anyone to share cost with me
ramomartin1832atgmaildotcom
[(copy those links and open them in your web browser!!!)]
fasfdsfa
May 13th, 2019
This is a pleasant weekend. I passed the CCNP 300-101 exam. I think I need to recommend this stable and effective material website to everyone.
Dump type: CCNA, CCNP, CCIE and cissp
Account Type: Routing and Switching, Security, Wireless, Data Center, Service Provider, Collaboration, Design http://www.aimpass.com/cisco_300_115_switch.php?utm_source=luntan0010100
55587das123
May 14th, 2019
Hello Guys,
share exam questions
pass hot dot com
Geremew
May 14th, 2019
Can any one help me on this
QUESTION 306
Which mechanism is used on Cisco Unified Communications Manager SIP trunks to determine where a SIP
user (A) can refer another user (B) to a third party (C)?
A. SIP trunk security profile
B. reference CSS
C. rerouting CSS
D. redirection
Correct Answer: D Section: (none)
Explanation
Explanation/Reference: I will take 300-070 next week
QUESTION 307
Which two items can be placed in a partition in Cisco Unified Communications Manager? (Choose two.)
A. gateways
B. CSS
C. translation patterns
D. Call Pickup Group
E. SIP trunks
Rob
May 14th, 2019
@Geremew
306
C. rerouting CSS
307
C. translation patterns
D. Call Pickup Group
Trust48
May 16th, 2019
@Jake
do you remember any new qustions? could you write them plz?
Anonymous
May 16th, 2019
Guys
Have any newses about this test.
Booked at tomorrow
Jake
May 16th, 2019
Use Wobbie dumps but check answer again some of them incorrect.
About 15 new questions some questions that i had remembered.
1. On VCS for H.323 about route pattern flow.
My Ans: ????-> search rule -> find me -> Longest-match
2. IX500 requires?
My Ans: Telepresence server
3.server B as publisher and run IP media stream. Server B is backup and enable media resource both server. When server B down what happens.
My Ans: software media resource on server B deregister and hardware media resource still remain.
4. Which tool about trace path.
My Answer: RTMT
5. About command translate 7822222 to 682222 chosen two.
My ans: rule 1 \?????\ and translation profile.
6. Which combination about video conference resource something.
My ans: 2900/3900 ISR PVDM3
7. About inboud and outbound call on CUCM
My ans: inbound CSS and Route Group
8. Which pattern will occur error when configure route pattern.
My ans: 123?
9. About full duplex slot on T1
My ans: 24
10.about dial peer command (prefix)
11.which functions of CUCM group. Choose two
My ans : load share and prioritize of endpoints registered.
12. Best codec on unicast MoH.
My ans: G.711 ulaw.
13. About debog POST dial peer choose two.
My ans: debug vtsp session and debug hdi detail. Not sure should be debug voip dailpeer.
14. Which command enable gateway and CUCM connection via qsiq or something.
My ans: isdn switch-type primary-qsig
Trust48
May 16th, 2019
@Jake
many thanks!
Will write about new Qs also
Fateh
May 16th, 2019
Thnx @Jake appreciate your effort.
akasanrda1985
May 17th, 2019
YES new questions really appeared
As described above 1-14 q
1. On VCS for H.323 about route pattern flow.
My Ans: ????-> search rule -> find me -> Longest-match —– What is the correct answer? ????
2. IX500 requires?
My Ans: Telepresence server —- I think that’s right
3.server B as publisher and run IP media stream. Server B is backup and enable media resource both server. When server B down what happens.
My Ans: software media resource on server B deregister and hardware media resource still remain. — What is the correct answer?????
4. Which tool about trace path.
My Answer: RTMT —- I think that’s right
5. About command translate 7822222 to 682222 chosen two.
My ans: rule 1 \?????\ and translation profile. —- What is the correct answer?????
6. Which combination about video conference resource something.
My ans: 2900/3900 ISR PVDM3 —– What is the correct answer?????
7. About inboud and outbound call on CUCM
My ans: inbound CSS and Route Group —- What is the correct answer?????
8. Which pattern will occur error when configure route pattern.
My ans: 123? —- What is the correct answer?????
9. About full duplex slot on T1
My ans: 24 —– What is the correct answer?????
10.about dial peer command (prefix) — What is the correct answer?????
11.which functions of CUCM group. Choose two
My ans : load share and prioritize of endpoints registered —- What is the correct ????
12. Best codec on unicast MoH.
My ans: G.711 ulaw —- What is the correct ????
13. About debog POST dial peer choose two.
My ans: debug vtsp session and debug hdi detail. Not sure should be debug voip dailpeer. —– What is the correct ????
14. Which command enable gateway and CUCM connection via qsiq or something.
My ans: isdn switch-type primary-qsig —– What is the correct ????
Today passed the exam did not pass were new questions
____________________
Woobbie
Are you sure that the dump wooble 322 correct answers?
QUESTION 311
You want to integrate MCU with Cisco Unified Communications Manager. How do you configure MCU in
Cisco Unified Communications Manager?
A. MCU is configured in Cisco VCS only.
B. Media Resource > Conference Bridge > Cisco IOS Heterogeneous Video Conference Bridge
C. Media Resource > Conference Bridge > Cisco IOS Homogenous Video Conference Bridge
D. Media Resource > Conference Bridge > Cisco TelePresence MCU
answer B
—– Is this correct answer seems to me —– D Telepresence MCU
[(copy those links and open them in your web browser!!!)]
Trust48
May 21st, 2019
Passed 907, but were many new Q
In addition to below Qs:
In VCS for H.323 calls which settings must be enabled in the search rules for calls to work:
– A search rule with Module Any alias and a target of the directory Expressway
– set up serach rule surce toAll ZOne
– serach rules configured without a Source Any
+ serach rules must be configured with a source of Any
Which 2 configuration in CUCM are outbound and inbound calls:
– route lists and outgoing CSS
– inbound CSS and route group
+ route pattern and outgoing CSS
– inbound CSS and device pool
Which 2 features are provided in CUCM group:
+ call load balancing
– system IP address
– registration with different clusters in the same network
+ CUCM redundancy
– priorotized list of upto two CUCM servers (why two????)
Which search rule order is correct for VCS call routing:
– call policy routing logic > transforms > user policies (Find Me) > longest match search rule
– call policy routing logic > transforms > user policies (Find Me) > priopity-based search rule
– transforms > call policy routing logic > user policies (Find Me) > priopity-based search rule
– call policy routing logic > transforms > longest match search rule > user policies (Find Me)
+ transforms > call policy routing logic > user policies (Find Me) > longest match search rule
Any comments?
Istmo
May 22nd, 2019
Trust48, which dump did you use?
Trust48
May 22nd, 2019
@Istmo
Use W0bble dump with 322 Q&A
But it not enough
Bob
May 23rd, 2019
Trust48 what else did you use? Would wooble and new questions posted be enough to pass?
passed exam 300-080(spoto177 dated 4/19) and 300-085 and got new questions; trying to recover cost. If you want to share it with, can offer it for a price, email me at benvaras2 at Gmail com
Trust48
May 27th, 2019
@Bob
Yes, used dump and posted new questions overview. For passed its enough, but my test had many mistakes (about 9-10). Think W0bble dump has any mistakes.
Has any actual dump for 300-085 CAPPS?
Share expierence plz..
Anonymous
May 27th, 2019
YES new questions really appeared
As described above 1-14 q
1. On VCS for H.323 about route pattern flow.
My Ans: ????-> search rule -> find me -> Longest-match —– What is the correct answer? ????
2. IX500 requires?
My Ans: Telepresence server —- I think that’s right
3.server B as publisher and run IP media stream. Server B is backup and enable media resource both server. When server B down what happens.
My Ans: software media resource on server B deregister and hardware media resource still remain. — What is the correct answer?????
4. Which tool about trace path.
My Answer: RTMT —- I think that’s right
5. About command translate 7822222 to 682222 chosen two.
My ans: rule 1 \?????\ and translation profile. —- What is the correct answer?????
6. Which combination about video conference resource something.
My ans: 2900/3900 ISR PVDM3 —– What is the correct answer?????
7. About inboud and outbound call on CUCM
My ans: inbound CSS and Route Group —- What is the correct answer?????
8. Which pattern will occur error when configure route pattern.
My ans: 123? —- What is the correct answer?????
9. About full duplex slot on T1
My ans: 24 —– What is the correct answer?????
10.about dial peer command (prefix) — What is the correct answer?????
11.which functions of CUCM group. Choose two
My ans : load share and prioritize of endpoints registered —- What is the correct ????
12. Best codec on unicast MoH.
My ans: G.711 ulaw —- What is the correct ????
13. About debog POST dial peer choose two.
My ans: debug vtsp session and debug hdi detail. Not sure should be debug voip dailpeer. —– What is the correct ????
14. Which command enable gateway and CUCM connection via qsiq or something.
My ans: isdn switch-type primary-qsig —– What is the correct ????
Today passed the exam did not pass were new questions
____________________
Woobbie
Are you sure that the dump wooble 322 correct answers?
QUESTION 311
You want to integrate MCU with Cisco Unified Communications Manager. How do you configure MCU in
Cisco Unified Communications Manager?
A. MCU is configured in Cisco VCS only.
B. Media Resource > Conference Bridge > Cisco IOS Heterogeneous Video Conference Bridge
C. Media Resource > Conference Bridge > Cisco IOS Homogenous Video Conference Bridge
D. Media Resource > Conference Bridge > Cisco TelePresence MCU
answer B
—– Is this correct answer seems to me —– D Telepresence MCU
spineda
May 27th, 2019
Hello forum,
I am certifying and I want to recover some money, I send the exams for 20 Dolares each one by Paypal.
300-070 – Implementing Cisco IP Telephony & Video, Part 1 v1.0
305 Q&As Updated: May 22, 2019
300-075 – Implementing Cisco IP Telephony & Video, Part 2 v1.0
459 Q&As Updated: May 22, 2019
passed exam 300-080 using spoto177 and got few new questions; can share it with you for $30 USD
also passed 300-085 with a score of 9XX using spoto157 questions. 90% of the questions in the exam, just email benvaras2 at Gmail if interested, for $40, just need to recover cost getting this spoto.
email at benvaras2 at Gmail
BEN
May 27th, 2019
Pass it without any risk:
Save You Huge Exam Fee!!
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
REMOVE SPACES
rebrand . ly/ccnac9fa4
New File
May 29th, 2019
I made it today with 9xx/1000, everything here is valid.
I am now moving on to Next Exam.
Share latest exam Questions enjoy
Remove Stars***
https:/*/cut*t.ly/eyJG5q
Joy
May 30th, 2019
I have passed the exam with 8XX/1000.
Please make sure you verify answers.The above 14 questions also appeared.
T3nn1$
May 30th, 2019
Hello Joy,
Which Dump did you use?
ExamPass
June 2nd, 2019
I have 100 percent gurantee dump , please contact me at anoopitexamsatgamildotcom
Kelvin Cheung
June 3rd, 2019
Congratulations!!!
Passed 300-070 exam recently with 9xx.
PassLeader 305q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing! @Sederrick Salone (May 20th, 2019)
Thanks a lot!
VoipGuy
June 3rd, 2019
Anyone can share the dumps for 300-070 pls
Anonymous
June 3rd, 2019
Kelvin Hi!
Did you give the exam within June
ben
June 3rd, 2019
passed exam 300-080 using spoto177 and got few new questions; can share it with you for $30 also passed 300-085 with a score of 9XX using spoto157 questions. 90% of the questions in the exam, just email benvaras2 at Gmail if interested, for $40, just need to recover cost getting this spoto. email at benvaras2 at Gmail
Joy
June 4th, 2019
@T3nn1,
I used the 322 questions shared by @wobble
and the 14 questions posted on this page
@T3nn1,
June 4th, 2019
@Joy, Thanks for your feedack!!
This is what i am using as well. I was wondering if this is still up to date since I am planning to place the exam soon.
Joy
June 4th, 2019
@t3nn1,
Yes it is but please re check the answers.BTW I will take CIPTV2 next week
t3nn1
June 5th, 2019
@Joy
Good luck with your Exam, I will take 300-070 next week so I will keep you all posted.
VoipGuy
June 6th, 2019
anyone can pls share a valid dumps or wobble dumps?
thank you.
pass(No spaces)hot dot com
June 6th, 2019
Hello guys, share latest exam questions
look my name
Jason
June 6th, 2019
@VoipGuy send me your email and I share the wobble dumps with you
VoipGuy
June 6th, 2019
@jason
tanrannelyrvin at gmail.com
Thanks!
Anonymous
June 10th, 2019
Congratulations!!!
Passed 300-070 exam on 5/June/2019 with 9xx.
PassLeader 305q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing! @Sederrick Salone (May 20th, 2019)
Thanks a lot!
+1
VvQ
June 10th, 2019
anyone takes the exam recently? please share
Dave
June 10th, 2019
Hi!
Can you share with me the dumps? I going to take the examen next month.
CIPTV1 300-070
Here is my email: futurord2020 at gmail dot com
Thanks a lot and keep growing!!
Anonymous
June 11th, 2019
Passed 300-075 with 8XX recently.
Passleader 459Q is still 80% relevant, there are some new questions, but I cannot remember sadly.
Anonymoz
June 11th, 2019
Passed 300-070 8XX
Anonymous May 27th, 2019 data is still relevant.
Some new questions again around 5-7q.
Good luck. I am preparing 300-075 now.
Better to take 3 exams this year to convert to the new CCNP Collaboration that has been announced.
Eugene Park
June 12th, 2019
Anyone passed?
Eugene Park
June 12th, 2019
Anyone passed recently?
Please share.
Andreasdi
June 12th, 2019
Congratulations!!!
Passed 300-070 exam at the beginning of June/2019 with 9xx.
PassLeader 303q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing! @Sederrick Salone (May 20th, 2019)
Thanks a lot!
+1
+1
p.s.
Taking the 300-070 exam ASAP, the exam will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
Andreasdi
June 12th, 2019
P.S.
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(459q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Andreasdi
June 12th, 2019
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(246q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
June 12th, 2019
NEW QUESTION 104
Which type of endpoints support the DSCP for Video Calls parameter in Cisco Unified CM?
A. only Cisco Telepresence endpoints
B. any video capable device
C. only Jabber
D. only Cisco UC video endpoints
Answer: B
NEW QUESTION 106
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef
Answer: B
NEW QUESTION 107
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)
A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.
Answer: CE
NEW QUESTION 116
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.
Answer: A
NEW QUESTION 117
Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RASenabled
endpoint that originates from an external zone?
A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS
Answer: C
QUESTION 124
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)
A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.
Answer: BE
NEW QUESTION 128
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: AC
Answer: AC
NEW QUESTION 131
Which two options should be used to create a secure traversal zone between the Expressway-C and
Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Answer: AC
NEW QUESTION 134
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence
endpoints?
A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)
Answer: D
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 154
Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints
registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: AC
Updated Queries
June 12th, 2019
I made it today with 9xx/1000. everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Without 1 ***
https:/*/ezee.link/Q4ip0SG4xT
Anonymous
June 12th, 2019
NEW QUESTION 206
Where do you specify the device mobility group and physical location after they have been configured?
A. phones
B. DMI
C. device mobility CSS
D. device pool
E. MRGL
F. locale
Answer: D
NEW QUESTION 210
Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)
A. The phone configuration is not modified.
B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.
C. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool.
D. If the DMGs are the same, the Device Mobility-related settings are also applied.
Answer: BD
pass(No spaces)hot dot com
June 14th, 2019
Cisco will change in 2020, the guys who want to take the exam should hurry.
pass(No spaces)hot dot com provides the latest exam questions
Anonymous
June 16th, 2019
Hi guys,
Any one has updated Dumps for 300-070?
please share it with us
Alberto Amante
June 17th, 2019
Congratulations!!!
Passed 300-070 exam at the beginning of June/2019 with 9xx.
PassLeader 303q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing! @Sederrick Salone (May 20th, 2019)
Thanks a lot!
+1
+1
+1
p.s.
Taking the 300-070 exam ASAP, the exam will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
Alberto Amante
June 17th, 2019
P.S.
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(459q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Alberto Amante
June 17th, 2019
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(246q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
June 18th, 2019
NEW QUESTION 106
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef
Answer: B
NEW QUESTION 107
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)
A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.
Answer: CE
NEW QUESTION 116
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.
Answer: A
NEW QUESTION 117
Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RASenabled
endpoint that originates from an external zone?
A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS
Answer: C
QUESTION 124
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)
A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.
Answer: BE
NEW QUESTION 128
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: AC
Answer: AC
NEW QUESTION 131
Which two options should be used to create a secure traversal zone between the Expressway-C and
Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Answer: AC
NEW QUESTION 134
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence
endpoints?
A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)
Answer: D
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 154
Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints
registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neig3t4hbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: AC
Passed Successfully
June 18th, 2019
I made it today with 9xx/1000, everything here is valid!
Need vcs file
akasndra1985 @ yahoo.com
hello is WObble still valid please?
I heard that Cisco’s switching the exams almost monthly nowadays. Anybody has used WObble’s guide recently and can confirm validity? Thanks!
hi guys,, could you share dump for 210-060 210-060 Implementing Cisco Collaboration Devices (CICD)
Congratulations!!!
Passed 300-070 exam on 12/April/2019 with 9xx.
PassLeader 305q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing!
BTW, anyone kindly share the PassLeader 300-080 dumps with 326q?
Thanks a lot!
just passed my exam WObble dump is still valid.
Asok, was there any new questions? for 300-070?
Asok , was there any new question other than Wobble dump?
Asok – thank you for the feedback! No new questions?
Asok can you confirm if there was any new quesiton other than wobbie dumps.
did anybody wrote the exam and find new quesitons?please reply
wroted today again failed, 10 new questions again, otherthan wobbie dump
mohiuddin – apart from the 10 new questions, were they all on Wobble’s dump? What are the new questions by the way? Thank you!
yes for 300-070 mostly from WOBBIE Dump. Apart from 10 to 12 new quesitons. got
803 missed by 33 more , this was my second attempt
Thanks, mohiuddin! The new questions are more labs or what?
its more about commands and something new questions which i have never seen.
Recently passed this exam 300-080 using spoto177 dated 4/19 and got 2 new questions more; trying to recover cost. If you want to share it with, i can offer it at 30 USD, email me at benvaras2 at Gmail com
Passed the exam 300-070 today, thanks to WOBBIE Dump
10 to 12 new questions related more in VCS and show commands
ATTENTION PLEASE!!!
ATTENTION PLEASE!!!
ATTENTION PLEASE!!!
PassLeader 300-070 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpd3liQ3hmU0VIdnM
(305q~~~NEW VERSION DUMPS!!!)
And,
PassLeader 300-075 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpSlBUZHQxc19EWHM
(459q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
More:
PassLeader 300-080 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpZ0owZW9faW9hbzQ
(326q~~~NEW VERSION DUMPS!!!)
And,
PassLeader 300-085 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpYzVWM3RBVFduNXc
(246q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Share a test method that helps me pass CCNP 300-101 quickly and smoothly
http://www.reddit.com/user/davis0519/comments/bi6lq2/stable_and_effective_ccna_ccnp_ccie_cissp_dump/?utm_source=ltredit
NEW QUESTION 296
An endpoint cannot connect to a valid TFTP server during the registration process. Which two statements describe possible causes? (Choose two.)
A. The DHCP configuration contains TFTP server 66, but no DNS server is available.
B. The DHCP configuration contains TFTP server 150, but no DNS server is available.
C. No separate voice VLAN configuration on the switch port connected to the endpoint.
D. Cisco Unified Communications Manager CallManager services are not started.
E. Cisco Unified Communications Manager TFTP services are not started.
Answer: DE
NEW QUESTION 297
An engineer is troubleshooting an intersite call between two endpoints where calls are intermediately failing with the error message: “488 Not Acceptable Media”. Which option causes this error message to trigger?
A. The device pool contains more call processing agents in the CMG group than the endpoint can support.
B. MRGL contains more media groups than the endpoint can support.
C. A lower bandwidth is set in the location than the endpoint can support.
D. The hunt group contains more devices than the endpoint can support.
Answer: C
NEW QUESTION 298
You are troubleshooting an ILS connectivity issue. All clusters are set to “Use TLS Certificates”. Which certificates must be exchanged between Cisco Unified Communications Manager clusters?
A. Tomcat certificates between all nodes in all clusters.
B. TLS certificates between publisher nodes in all clusters.
C. Call Manager certificates between publisher nodes in all clusters.
D. Tomcat certificates between publisher nodes in all clusters.
Answer: D
NEW QUESTION 299
An engineer is analyzing an issue about system connection under Cisco TMS connection, where endpoints handled by TMS automatically change from reachable on LAN to behind the firewall status. Which protocol does the network engineer need to troubleshoot the network between managed device Cisco TMS?
A. SDP
B. XMPP
C. FTP
D. HTTP
Answer: D
NEW QUESTION 300
Which two types of call causes the user to hear the reorder tone? (Choose two.)
A. call to a number that is working but is unlisted
B. restricted call
C. call using a non-Cisco phone
D. call to a number that has been blocked
E. unrestricted call
Answer: AB
NEW QUESTION 301
Replication is failing between the Cisco Unified Communications Manager Publisher and Subscriber servers. In which two ways can you verify the database replication status? (Choose two.)
A. TRACERT
B. CLI
C. APIC-EM
D. PING
E. RTMT
Answer: BE
NEW QUESTION 302
An engineer is investigating voice quality degradation on calls passing through a particular SIP gateway. To gather the necessary information, sample traffic captures are taken. Which information in the capture reveals the problem?
A. destination port
B. version
C. ToS bits
D. MTU
Answer: B
NEW QUESTION 303
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they are happening?
A. RTMT real-time trace
B. Cisco Unified Dialed Number Analyzer
C. Syslog output
D. RTMT performance log viewer
Answer: B
NEW QUESTION 304
An engineer is troubleshooting an issue where aliases that contain an identity “@abc.com” are unable to register with an endpoint due to an entry in the registration restriction configuration in Expressway-E. Where is the alias being blocked in Expressway-E?
A. regex list
B. hunt list
C. black list
D. allow list
Answer: C
NEW QUESTION 305
Which two statements about Cisco Unified CM location bandwidth deduction are true? (Choose two.)
A. If a call uses G.711, Cisco Unified Communications Manager subtracts 64k.
B. If a call uses G.711, Cisco Unified Communications Manager subtracts 80k.
C. If a call uses G.723, Cisco Unified Communications Manager subtracts 16k.
D. If a call uses G.729, Cisco Unified Communications Manager subtracts 16k.
E. If a call uses G.729, Cisco Unified Communications Manager subtracts 24k.
Answer: BE
NEW QUESTION 306
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two.)
A. An H.323 SAF trunk was configured instead of a SIP SAF trunk.
B. No directory number patterns were configured on the Cisco Unified Communications Manager.
C. CCD advertising service was not activated.
D. Incorrect user credentials were used on the SAF Forwarder.
E. CCD requesting service was not activated.
Answer: DE
NEW QUESTION 307
Company XYZ reports that their SAF calls are being routed through the PSTN. Which cause of the issue is true?
A. TCP Connection Failure has occurred between the SAF Forwarder and Cisco Unified Communications Manager.
B. Cisco Unified Communications Managed did not increment the service number correctly.
C. The maximum number of learned patterns have being reached.
D. Cisco Unified Communications Manager did not construct the SAF message correctly.
Answer: A
NEW QUESTION 308
Which action can you take to prevent users from transferring external calls to external devices?
A. Enable the Block OffNet to OffNet Transfer feature in Cisco Unified Communications Manager.
B. Block the National route pattern.
C. Remove the route pattern to prevent inbound calls from matching the gateway.
D. Create a new translation pattern to block external call transfer.
Answer: A
NEW QUESTION 309
Which CLI command is used to troubleshoot ILS network connection issues within the local Cisco Unified CM cluster to determine which server within the cluster is the xnode?
A. utils ils lookup
B. utils ils showpeerinfo
C. utils ils display xnode
D. utils ils find xnode
Answer: D
NEW QUESTION 310
After you deploy a new Cisco Collaboration solution, users report echoes and choppy voice quality. Which two actions correct the problem? (Choose two.)
A. Upgrade the Cisco IOS version and flash memory on the Cisco IOS router.
B. Deploy additional hardware resources.
C. Deploy an echo canceller.
D. Upgrade Cisco Unified Communications Manager.
E. Enable QoS on the network.
Answer: CE
I passed my exam yesterday with 97x/1000 score.
Dump is very reliable and stable.
All questions was from dumps no need to learn more
https://drive.google.com/open?id=1HihgLu7SFYQw26RDlOkU-LbAKWrYHRUL
NEW QUESTION 305
Which two statements about Cisco Unified CM location bandwidth deduction are true? (Choose two.)
A. If a call uses G.711, Cisco Unified Communications Manager subtracts 64k.
B. If a call uses G.711, Cisco Unified Communications Manager subtracts 80k.
C. If a call uses G.723, Cisco Unified Communications Manager subtracts 16k.
D. If a call uses G.729, Cisco Unified Communications Manager subtracts 16k.
E. If a call uses G.729, Cisco Unified Communications Manager subtracts 24k.
Answer: BE
NEW QUESTION 306
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two.)
A. An H.323 SAF trunk was configured instead of a SIP SAF trunk.
B. No directory number patterns were configured on the Cisco Unified Communications Manager.
C. CCD advertising service was not activated.
D. Incorrect user credentials wdwere used on the SAF Forwarder.
E. CCD requesting service was not activated.
Answer: DE
I am sitting the exam next week, using this https://www.itlibraries.com/dumps/cisco-300-070-dumps/ looks freshly updated if any1 tried it leave a thought.
Thx
Hi guys,
Any one has updated Dumps for any of the following exams?
300-070
300-075
300-080
300-085
Kindy let me know if you have.
Any one passed 300-070 exam?
I’m not sure Wobbie dump is enough to pass or do you have any update dumps?
Hi all,
Do you have any update for new 15 questions of 300-070 exam?
Passed, the itlibraries ones are valid 😀
Wobbie dumps is very good don’t know exactly how many questions were from it since I focused on the itlibraries ones.
Thanks ppl for the nice shares and for those of you how are studying for this you can find the study guides https://www.itlibraries.com/free-study-guides/300-070/
Wobbie dumps here (uploaded my self 😀 ) https://www.itlibraries.com/dumps/cisco-300-070-dumps/
best of luck!
ATTENTION PLEASE!!!
PassLeader 300-070 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpd3liQ3hmU0VIdnM
(305q~~~NEW VERSION DUMPS!!!)
And,
PassLeader 300-075 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpSlBUZHQxc19EWHM
(459q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
More:
PassLeader 300-080 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpZ0owZW9faW9hbzQ
(326q~~~NEW VERSION DUMPS!!!)
And,
PassLeader 300-085 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpYzVWM3RBVFduNXc
(246q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Share some new questions. It about 15 new questions almost about VCS .I just remember a few new questions:
1. Time slot of T1 -> 31 32 23 24 . I chose 24.
2. Which two options list the transcoder types that Cisco Unified Communications Manager supports?
IOS enhanced media termination point
virtual media termination point
PLDM
hardware ..
I chose IOS enhanced media termination point & hardware …
3. about conference resource
3900/2900 ISR PVDM3
3900/2900 ISR PVDM2
3800/2800 ISR PVDM3
3800/2200 ISR PVDM2
4310/… ISR PVDM3
I chose 3900/2900 ISR PVDM3
Kindly share more new questions that you have remember.
NEW QUESTION 296
An endpoint cannot connect to a valid TFTP server during the registration process. Which two statements describe possible causes? (Choose two.)
A. The DHCP configuration contains TFTP server 66, but no DNS server is available.
B. The DHCP configuration contains TFTP server 150, but no DNS server is available.
C. No separate voice VLAN configuration on the switch port connected to the endpoint.
D. Cisco Unified Communications Manager CallManager services are not started.
E. Cisco Unified Communications Manager TFTP services are not started.
Answer: DE
NEW QUESTION 297
An engineer is troubleshooting an intersite call between two endpoints where calls are intermediately failing with the error message: “488 Not Acceptable Media”. Which option causes this error message to trigger?
A. The device pool contains more call processing agents in the CMG group than the endpoint can support.
B. MRGL contains more media groups than the endpoint can support.
C. A lower bandwidth is set in the location than the endpoint can support.
D. The hunt group contains more devices than the endpoint can support.
Answer: C
NEW QUESTION 298
You are troubleshooting an ILS connectivity issue. All clusters are set to “Use TLS Certificates”. Which certificates must be exchanged between Cisco Unified Communications Manager clusters?
A. Tomcat certificates between all nodes in all clusters.
B. TLS certificates between publisher nodes in all clusters.
C. Call Manager certificates between publisher nodes in all clusters.
D. Tomcat certificates between publisher nodes in all clusters.
Answer: D
NEW QUESTION 299
An engineer is analyzing an issue about system connection under Cisco TMS connection, where endpoints handled by TMS automatically change from reachable on LAN to behind the firewall status. Which protocol does the network engineer need to troubleshoot the network between managed device Cisco TMS?
A. SDP
B. XMPP
C. FTP
D. HTTP
Answer: D
NEW QUESTION 300
Which two types of call causes the user to hear the reorder tone? (Choose two.)
A. call to a number that is working but is unlisted
B. restricted call
C. call using a non-Cisco phone
D. call to a number that has been blocked
E. unrestricted call
Answer: AB
NEW QUESTION 301
Replication is failing between the Cisco Unified Communications Manager Publisher and Subscriber servers. In which two ways can you verify the database replication status? (Choose two.)
A. TRACERT
B. CLI
C. APIC-EM
D. PING
E. RTMT
Answer: BE
NEW QUESTION 302
An engineer is investigating voice quality degradation on calls passing through a particular SIP gateway. To gather the necessary information, sample traffic captures are taken. Which information in the capture reveals the problem?
A. destination port
B. version
C. ToS bits
D. MTU
Answer: B
NEW QUESTION 303
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they are happening?
A. RTMT real-time trace
B. Cisco Unified Dialed Number Analyzer
C. Syslog output
D. RTMT performance log viewer
Answer: B
NEW QUESTION 304
An engineer is troubleshooting an issue where aliases that contain an identity “@abc.com” are unable to register with awefn endpoint due to an entry in the registration restriction configuration in Expressway-E. Where is the alias being blocked in Expressway-E?
A. regex list
B. hunt list
C. black list
D. allow list
Answer: C
NEW QUESTION 305
Which two statements about Cisco Unified CM location bandwidth deduction are true? (Choose two.)
A. If a call uses G.711, Cisco Unified Communications Manager subtracts 64k.
B. If a call uses G.711, Cisco Unified Communications Manager subtracts 80k.
C. If a call uses G.723, Cisco Unified Communications Manager subtracts 16k.
D. If a call uses G.729, Cisco Unified Communications Manager subtracts 16k.
E. If a call uses G.729, Cisco Unified Communications Manager subtracts 24k.
Answer: BE
NEW QUESTION 306
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two.)
A. An H.323 SAF trunk was configured instead of a SIP SAF trunk.
B. No directory number patterns were configured on the Cisco Unified Communications Manager.
C. CCD advertising service was not activated.
D. Incorrect user credentials were used on the SAF Forwarder.
E. CCD requesting service was not activated.
Answer: DE
NEW QUESTION 307
Company XYZ reports that their SAF calls are being routed through the PSTN. Which cause of the issue is true?w3
A. TCP Connection Failure has occurred between the SAF Forwarder and Cisco Unified Communications Manager.
B. Cisco Unified Communications Managed did not increment the service number correctly.
C. The maximum number of learned patterns have being reached.
D. Cisco Unified Communications Manager did not construct the SAF message correctly.
Answer: A
NEW QUESTION 308
Which action can you take to prevent users from transferring external calls to external devices?
A. Enable the Block OffNet to OffNet Transfer feature in Cisco Unified Communications Manager.
B. Block the National route pattern.
C. Remove the route pattern to prevent inbound calls from matching the gateway.
D. Create a new translation pattern to block external call transfer.
Answer: A
NEW QUESTION 309
Which CLI command is used to troubleshoot ILS network connection issues within the local Cisco Unified CM cluster to determine which server within the cluster is the xnode?
A. utils ils lookup
B. utils ils showpeerinfo
C. utils ils display xnode
D. utils ils find xnode
Answer: D
NEW QUESTION 310
After you deploy a new Cisco Collaboration solution, users report echoes and choppy voice quality. Which two actions correct the problem? (Choose two.)
A. Upgrade the Cisco IOS version and flash memory on the Cisco IOS router.
B. Deploy additional 3fw3fhardware resources.
C. Deploy an echo canceller.
D. Upgrade Cisco Unified Communications Manager.
E. Enable QoS on the network.
Answer: CE
I passed my exam yesterday with 97x/1000 score.
Dump is very reliable and stable.
All questions was from dumps no need to learn more
https://drive.google.com/open?id=1LXjQ_FtTjjLzDK2M6JcF7NbFvz684bmb
NEW QUESTION 303
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they are happening?
A. RTMT real-time trace
B. Cisco Unified Dialed Number Analyzer
C. Syslog output
D. RTMT performance log viewer
Answer: B
NEW QUESTION 304
An engineer is troubleshooting an issue where aliases that contain an identity “@abc.com” are unable to register with awefn endpoint due to an entry in the registration restriction configuration in Expressway-E. Where is the alias being blocked in Expressway-E?
A. regex list
B. hunt list
C. black list
D. allow list
Answer: C
Recently passed exam 300-080 using latest spoto177 dated Apr/19 (mht file) and got 2 new questions more; trying to recover cost. If you want to share it with, i can offer it at 30 USD, email me at benvaras2 at Gmail com
Hi,guys valid dumps，look my name
passhot, for which exam code
I passed 300-070 yesterday with 938/1000
About 15-20 new questions that Wobbie dumps not cover.
New questions ask about all topic related with dial plan, VCS, media resource, T1, Command on GW to connect with CUCM via PRI, tool for collect trace path.
I have bought 300-070 Spoto dump 192q and need anyone to share cost with me
ramomartin1832atgmaildotcom
ATTENTION PLEASE!!!
PassLeader 300-070 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpd3liQ3hmU0VIdnM
(305q~~~NEW VERSION DUMPS!!!)
And,
PassLeader 300-075 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpSlBUZHQxc19EWHM
(459q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
More:
PassLeader 300-080 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpZ0owZW9faW9hbzQ
(326q~~~NEW VERSION DUMPS!!!)
And,
PassLeader 300-085 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpYzVWM3RBVFduNXc
(246q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
This is a pleasant weekend. I passed the CCNP 300-101 exam. I think I need to recommend this stable and effective material website to everyone.
Dump type: CCNA, CCNP, CCIE and cissp
Account Type: Routing and Switching, Security, Wireless, Data Center, Service Provider, Collaboration, Design
http://www.aimpass.com/cisco_300_115_switch.php?utm_source=luntan0010100
Hello Guys,
share exam questions
pass hot dot com
Can any one help me on this
QUESTION 306
Which mechanism is used on Cisco Unified Communications Manager SIP trunks to determine where a SIP
user (A) can refer another user (B) to a third party (C)?
A. SIP trunk security profile
B. reference CSS
C. rerouting CSS
D. redirection
Correct Answer: D Section: (none)
Explanation
Explanation/Reference: I will take 300-070 next week
QUESTION 307
Which two items can be placed in a partition in Cisco Unified Communications Manager? (Choose two.)
A. gateways
B. CSS
C. translation patterns
D. Call Pickup Group
E. SIP trunks
@Geremew
306
C. rerouting CSS
307
C. translation patterns
D. Call Pickup Group
@Jake
do you remember any new qustions? could you write them plz?
Guys
Have any newses about this test.
Booked at tomorrow
Use Wobbie dumps but check answer again some of them incorrect.
About 15 new questions some questions that i had remembered.
1. On VCS for H.323 about route pattern flow.
My Ans: ????-> search rule -> find me -> Longest-match
2. IX500 requires?
My Ans: Telepresence server
3.server B as publisher and run IP media stream. Server B is backup and enable media resource both server. When server B down what happens.
My Ans: software media resource on server B deregister and hardware media resource still remain.
4. Which tool about trace path.
My Answer: RTMT
5. About command translate 7822222 to 682222 chosen two.
My ans: rule 1 \?????\ and translation profile.
6. Which combination about video conference resource something.
My ans: 2900/3900 ISR PVDM3
7. About inboud and outbound call on CUCM
My ans: inbound CSS and Route Group
8. Which pattern will occur error when configure route pattern.
My ans: 123?
9. About full duplex slot on T1
My ans: 24
10.about dial peer command (prefix)
11.which functions of CUCM group. Choose two
My ans : load share and prioritize of endpoints registered.
12. Best codec on unicast MoH.
My ans: G.711 ulaw.
13. About debog POST dial peer choose two.
My ans: debug vtsp session and debug hdi detail. Not sure should be debug voip dailpeer.
14. Which command enable gateway and CUCM connection via qsiq or something.
My ans: isdn switch-type primary-qsig
@Jake
many thanks!
Will write about new Qs also
Thnx @Jake appreciate your effort.
YES new questions really appeared
As described above 1-14 q
1. On VCS for H.323 about route pattern flow.
My Ans: ????-> search rule -> find me -> Longest-match —– What is the correct answer? ????
2. IX500 requires?
My Ans: Telepresence server —- I think that’s right
3.server B as publisher and run IP media stream. Server B is backup and enable media resource both server. When server B down what happens.
My Ans: software media resource on server B deregister and hardware media resource still remain. — What is the correct answer?????
4. Which tool about trace path.
My Answer: RTMT —- I think that’s right
5. About command translate 7822222 to 682222 chosen two.
My ans: rule 1 \?????\ and translation profile. —- What is the correct answer?????
6. Which combination about video conference resource something.
My ans: 2900/3900 ISR PVDM3 —– What is the correct answer?????
7. About inboud and outbound call on CUCM
My ans: inbound CSS and Route Group —- What is the correct answer?????
8. Which pattern will occur error when configure route pattern.
My ans: 123? —- What is the correct answer?????
9. About full duplex slot on T1
My ans: 24 —– What is the correct answer?????
10.about dial peer command (prefix) — What is the correct answer?????
11.which functions of CUCM group. Choose two
My ans : load share and prioritize of endpoints registered —- What is the correct ????
12. Best codec on unicast MoH.
My ans: G.711 ulaw —- What is the correct ????
13. About debog POST dial peer choose two.
My ans: debug vtsp session and debug hdi detail. Not sure should be debug voip dailpeer. —– What is the correct ????
14. Which command enable gateway and CUCM connection via qsiq or something.
My ans: isdn switch-type primary-qsig —– What is the correct ????
Today passed the exam did not pass were new questions
____________________
Woobbie
Are you sure that the dump wooble 322 correct answers?
QUESTION 311
You want to integrate MCU with Cisco Unified Communications Manager. How do you configure MCU in
Cisco Unified Communications Manager?
A. MCU is configured in Cisco VCS only.
B. Media Resource > Conference Bridge > Cisco IOS Heterogeneous Video Conference Bridge
C. Media Resource > Conference Bridge > Cisco IOS Homogenous Video Conference Bridge
D. Media Resource > Conference Bridge > Cisco TelePresence MCU
answer B
—– Is this correct answer seems to me —– D Telepresence MCU
ATTENTION PLEASE!!!
PassLeader 300-070 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpd3liQ3hmU0VIdnM
(305q~~~NEW VERSION DUMPS!!!)
And,
PassLeader 300-075 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpSlBUZHQxc19EWHM
(459q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
More:
PassLeader 300-080 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpZ0owZW9faW9hbzQ
(326q~~~NEW VERSION DUMPS!!!)
And,
PassLeader 300-085 dumps from Google Drive FYI:
https://drive.google.com/drive/folders/0B-ob6L_QjGLpYzVWM3RBVFduNXc
(246q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Passed 907, but were many new Q
In addition to below Qs:
In VCS for H.323 calls which settings must be enabled in the search rules for calls to work:
– A search rule with Module Any alias and a target of the directory Expressway
– set up serach rule surce toAll ZOne
– serach rules configured without a Source Any
+ serach rules must be configured with a source of Any
Which 2 configuration in CUCM are outbound and inbound calls:
– route lists and outgoing CSS
– inbound CSS and route group
+ route pattern and outgoing CSS
– inbound CSS and device pool
Which 2 features are provided in CUCM group:
+ call load balancing
– system IP address
– registration with different clusters in the same network
+ CUCM redundancy
– priorotized list of upto two CUCM servers (why two????)
Which search rule order is correct for VCS call routing:
– call policy routing logic > transforms > user policies (Find Me) > longest match search rule
– call policy routing logic > transforms > user policies (Find Me) > priopity-based search rule
– transforms > call policy routing logic > user policies (Find Me) > priopity-based search rule
– call policy routing logic > transforms > longest match search rule > user policies (Find Me)
+ transforms > call policy routing logic > user policies (Find Me) > longest match search rule
Any comments?
Trust48, which dump did you use?
@Istmo
Use W0bble dump with 322 Q&A
But it not enough
Trust48 what else did you use? Would wooble and new questions posted be enough to pass?
Share latest Update exam question
http:/*/u6.g*g/sAu9r
passed exam 300-080(spoto177 dated 4/19) and 300-085 and got new questions; trying to recover cost. If you want to share it with, can offer it for a price, email me at benvaras2 at Gmail com
@Bob
Yes, used dump and posted new questions overview. For passed its enough, but my test had many mistakes (about 9-10). Think W0bble dump has any mistakes.
Has any actual dump for 300-085 CAPPS?
Share expierence plz..
YES new questions really appeared
As described above 1-14 q
1. On VCS for H.323 about route pattern flow.
My Ans: ????-> search rule -> find me -> Longest-match —– What is the correct answer? ????
2. IX500 requires?
My Ans: Telepresence server —- I think that’s right
3.server B as publisher and run IP media stream. Server B is backup and enable media resource both server. When server B down what happens.
My Ans: software media resource on server B deregister and hardware media resource still remain. — What is the correct answer?????
4. Which tool about trace path.
My Answer: RTMT —- I think that’s right
5. About command translate 7822222 to 682222 chosen two.
My ans: rule 1 \?????\ and translation profile. —- What is the correct answer?????
6. Which combination about video conference resource something.
My ans: 2900/3900 ISR PVDM3 —– What is the correct answer?????
7. About inboud and outbound call on CUCM
My ans: inbound CSS and Route Group —- What is the correct answer?????
8. Which pattern will occur error when configure route pattern.
My ans: 123? —- What is the correct answer?????
9. About full duplex slot on T1
My ans: 24 —– What is the correct answer?????
10.about dial peer command (prefix) — What is the correct answer?????
11.which functions of CUCM group. Choose two
My ans : load share and prioritize of endpoints registered —- What is the correct ????
12. Best codec on unicast MoH.
My ans: G.711 ulaw —- What is the correct ????
13. About debog POST dial peer choose two.
My ans: debug vtsp session and debug hdi detail. Not sure should be debug voip dailpeer. —– What is the correct ????
14. Which command enable gateway and CUCM connection via qsiq or something.
My ans: isdn switch-type primary-qsig —– What is the correct ????
Today passed the exam did not pass were new questions
____________________
Woobbie
Are you sure that the dump wooble 322 correct answers?
QUESTION 311
You want to integrate MCU with Cisco Unified Communications Manager. How do you configure MCU in
Cisco Unified Communications Manager?
A. MCU is configured in Cisco VCS only.
B. Media Resource > Conference Bridge > Cisco IOS Heterogeneous Video Conference Bridge
C. Media Resource > Conference Bridge > Cisco IOS Homogenous Video Conference Bridge
D. Media Resource > Conference Bridge > Cisco TelePresence MCU
answer B
—– Is this correct answer seems to me —– D Telepresence MCU
Hello forum,
I am certifying and I want to recover some money, I send the exams for 20 Dolares each one by Paypal.
300-070 – Implementing Cisco IP Telephony & Video, Part 1 v1.0
305 Q&As Updated: May 22, 2019
300-075 – Implementing Cisco IP Telephony & Video, Part 2 v1.0
459 Q&As Updated: May 22, 2019
300-085 – Implementing Cisco Collaboration Application v1.0
246 Q&As Updated: May 22, 2019
I also have some books in PDF.
Send an email
ing.spineda at gmail.com
Good luck to everyone!
passed exam 300-080 using spoto177 and got few new questions; can share it with you for $30 USD
also passed 300-085 with a score of 9XX using spoto157 questions. 90% of the questions in the exam, just email benvaras2 at Gmail if interested, for $40, just need to recover cost getting this spoto.
email at benvaras2 at Gmail
Pass it without any risk:
Save You Huge Exam Fee!!
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
REMOVE SPACES
rebrand . ly/ccnac9fa4
I made it today with 9xx/1000, everything here is valid.
I am now moving on to Next Exam.
Share latest exam Questions enjoy
Remove Stars***
https:/*/cut*t.ly/eyJG5q
I have passed the exam with 8XX/1000.
Please make sure you verify answers.The above 14 questions also appeared.
Hello Joy,
Which Dump did you use?
I have 100 percent gurantee dump , please contact me at anoopitexamsatgamildotcom
Congratulations!!!
Passed 300-070 exam recently with 9xx.
PassLeader 305q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing! @Sederrick Salone (May 20th, 2019)
Thanks a lot!
Anyone can share the dumps for 300-070 pls
Kelvin Hi!
Did you give the exam within June
passed exam 300-080 using spoto177 and got few new questions; can share it with you for $30 also passed 300-085 with a score of 9XX using spoto157 questions. 90% of the questions in the exam, just email benvaras2 at Gmail if interested, for $40, just need to recover cost getting this spoto. email at benvaras2 at Gmail
@T3nn1,
I used the 322 questions shared by @wobble
and the 14 questions posted on this page
@Joy, Thanks for your feedack!!
This is what i am using as well. I was wondering if this is still up to date since I am planning to place the exam soon.
@t3nn1,
Yes it is but please re check the answers.BTW I will take CIPTV2 next week
@Joy
Good luck with your Exam, I will take 300-070 next week so I will keep you all posted.
anyone can pls share a valid dumps or wobble dumps?
thank you.
Hello guys, share latest exam questions
look my name
@VoipGuy send me your email and I share the wobble dumps with you
@jason
tanrannelyrvin at gmail.com
Thanks!
Congratulations!!!
Passed 300-070 exam on 5/June/2019 with 9xx.
PassLeader 305q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing! @Sederrick Salone (May 20th, 2019)
Thanks a lot!
+1
anyone takes the exam recently? please share
Hi!
Can you share with me the dumps? I going to take the examen next month.
CIPTV1 300-070
Here is my email: futurord2020 at gmail dot com
Thanks a lot and keep growing!!
Passed 300-075 with 8XX recently.
Passleader 459Q is still 80% relevant, there are some new questions, but I cannot remember sadly.
Passed 300-070 8XX
Anonymous May 27th, 2019 data is still relevant.
Some new questions again around 5-7q.
Good luck. I am preparing 300-075 now.
Better to take 3 exams this year to convert to the new CCNP Collaboration that has been announced.
Anyone passed?
Anyone passed recently?
Please share.
Congratulations!!!
Passed 300-070 exam at the beginning of June/2019 with 9xx.
PassLeader 303q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing! @Sederrick Salone (May 20th, 2019)
Thanks a lot!
+1
+1
p.s.
Taking the 300-070 exam ASAP, the exam will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
P.S.
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(459q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(246q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 104
Which type of endpoints support the DSCP for Video Calls parameter in Cisco Unified CM?
A. only Cisco Telepresence endpoints
B. any video capable device
C. only Jabber
D. only Cisco UC video endpoints
Answer: B
NEW QUESTION 106
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef
Answer: B
NEW QUESTION 107
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)
A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.
Answer: CE
NEW QUESTION 116
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.
Answer: A
NEW QUESTION 117
Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RASenabled
endpoint that originates from an external zone?
A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS
Answer: C
QUESTION 124
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)
A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.
Answer: BE
NEW QUESTION 128
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: AC
Answer: AC
NEW QUESTION 131
Which two options should be used to create a secure traversal zone between the Expressway-C and
Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Answer: AC
NEW QUESTION 134
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence
endpoints?
A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)
Answer: D
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 154
Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints
registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: AC
I made it today with 9xx/1000. everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Without 1 ***
https:/*/ezee.link/Q4ip0SG4xT
NEW QUESTION 206
Where do you specify the device mobility group and physical location after they have been configured?
A. phones
B. DMI
C. device mobility CSS
D. device pool
E. MRGL
F. locale
Answer: D
NEW QUESTION 210
Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)
A. The phone configuration is not modified.
B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.
C. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool.
D. If the DMGs are the same, the Device Mobility-related settings are also applied.
Answer: BD
Cisco will change in 2020, the guys who want to take the exam should hurry.
pass(No spaces)hot dot com provides the latest exam questions
Hi guys,
Any one has updated Dumps for 300-070?
please share it with us
Congratulations!!!
Passed 300-070 exam at the beginning of June/2019 with 9xx.
PassLeader 303q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing! @Sederrick Salone (May 20th, 2019)
Thanks a lot!
+1
+1
+1
p.s.
Taking the 300-070 exam ASAP, the exam will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
P.S.
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(459q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(246q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 106
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef
Answer: B
NEW QUESTION 107
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)
A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.
Answer: CE
NEW QUESTION 116
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.
Answer: A
NEW QUESTION 117
Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RASenabled
endpoint that originates from an external zone?
A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS
Answer: C
QUESTION 124
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)
A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.
Answer: BE
NEW QUESTION 128
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: AC
Answer: AC
NEW QUESTION 131
Which two options should be used to create a secure traversal zone between the Expressway-C and
Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Answer: AC
NEW QUESTION 134
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence
endpoints?
A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)
Answer: D
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 154
Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints
registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neig3t4hbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: AC
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam.
Share latest examm Questions enjoy
Without 2 ***
https:/*/eze*e.link/Q4ip0SG4xT