Share your CIPT2 v8.0 Experience

Passed last week…it was piece of cake just go through the same 391PL and then the questions here from the forum before it changes soon…Good luck

Passed this week with score 9xx , 391 PL 70 % and this forum 30 %

+ 2 to 4 new questions

on VCS / CUCM.

Can someone share the new questions that are from this forum with answers schaehan at gmail dot com.

all questions included from page 17 to 23 in this forum

Cleared the exam today. Most questions are from this forum shared by Henry and few others. Go through these questions very thoroughly because these will come for sure. Along with these read the dumps.

examdumpJust Passed ccnp exam very recently. Most updated exam dumps used to prepare for 300-115. Really helpful dumps for me. Try these dumps Question answers : https://www.braindumpskey.com/exam/300-115.html

Which two types of devices are affected when an engineer changes the DSCP for Video Calls service parameter? (Choose two.)
A. DX-650
B. Cisco Jabber Desktop
C. CP-7965
D. EX-60
E. MX-200

please advise

Hi newh,

the answer is A, and B.

many thanks

@newh
when you will take this exam?

i need vaild dump plz mohamed.elraie77@ gmail .com

For Newh’s question
Which two types of devices are affected when an engineer changes the DSCP for Video Calls service parameter? (Choose two.)
A. DX-650
B. Cisco Jabber Desktop
C. CP-7965
D. EX-60
E. MX-200

Many dumps have A and C as right answer

Passed this week with score 9xx , 391 PL 70 % and this forum 30 %

Can someone please share the PDF file of 391 PL to my email (ipe_chie07 @ yahoo . com)? Thanks in advance and God bless!

Which two types of devices are affected when an engineer changes the DSCP for Video Calls service parameter? (Choose two.)
A. DX-650
B. Cisco Jabber Desktop
C. CP-7965
D. EX-60
E. MX-200
Many dumps have A and C as right answer – I agree to this since DX-650 and CP-7965 are registered with CUCM… Jabber is for Presence/IM&P

CP-7965 , support only audio calls no video , also Jabber can register with CUCM as a soft client , Jabber support Video Calls .
so the correct answer should be : DX650 and Cisco Jabber Desktop

Common port using Expresway C and E:
*-1920
-1921
-1922
-1923

How to pickup call in progress?
MVA
*mobile connect

Q1: How do you configure phones to register with a primary and secondary cucm
-dns option 150
-dhcp option 66
*-dhcp option 150
-tftp config file
-cucm config file , and secondary cucm during registration
Q2: other one is dhcp question…where does the endpoint get a list of cucm
*-tftp config file

is it right? please advise

port usage of secure traversal zone between expressway C and E
– 8190
– 8192
– 8193
– 8194
Answer : – 8192

Passed today 8xx.
The new dumps from IT-Libraries are more then enough to pass. now they have the VCE player included too.
https://www.itlibraries.com/downloads/300-075-3/

120. Companl X has deploled a VCS Control with a local zone and a traversal client zone. To facilitate external calls, VCS
Expressway is deploled and traversal server zone is set up there. Video endpoints inside Companl X have registered,
but are unable to receive calls from outside endpoints. Which option could be the cause of this issue?
**B.The access control list on the VCS Control must be updated with the IP for the external users.
D.The local zone on the VCS Control does not have a search rule configured.

is it right?

Passed last week with 9xx.

Study the IT-Libraries 402Q, PL 391Q dumps and the questions posted here in this forum. (about 90% is valid)

they left about 6 news questions, some of which I remember:

Question:

…pre-searches rules subzones…where can define… limit bandwith?
-defaul, traversal, all manual subzones
-cluster
-default <—
-manual subzones

Question:

dial-peer voice 9 pots
Description …dialing first 9
destination-pattern 9011T
port 1/0:23

……..if send out PSTN number 90113648850..?

-01113648850
-90113648850
-+90113648850
-13648850

Question:

SRST fail…switch backup number?
– ???
– ???
– ???
– ???

Question:

…?(chosse two)
– …VCS priority (first 1, than 2, 3) <—
-… route is configure call after police politics applies, befores user polices…
-….route is configure call before police politics applies, befores user polices…
– ???
– ???

Question:

..alling number transformation fields in CUCM SIP trunk…? (choose two.)
A. subscriber <—-
B. unknown <—–
C. ????
D. ????
E. ????
F. ????

Question:

….how calls can be registed in the CUCM?
-DHCP option 150
-CDP prococol
-??
-??

Question:

Which 3 steps to configure mobile and remote access (MRA) on VCS configure? (Choose three)
– Configure VCS for CUCM
– Configure DNS and NTP
– Discover CUCM to IM&P
-??
-??
-???

Sorry, I can not remember anything else. Good Luck!!!

Hi Nuke,

Could you share with me the IT-Libraries 402Q on faisal (dot) saoud (at) hotmail (dot) com

thanks in advance 🙂

Did the exam today. Loads of new questions on VCS. Know your stuff and you will be alright.

Peace,
Could you share few questions on the exam, specially the ones on VCS? I have worked on the VCS, just want to be on the safe side as I am writing my exam on Monday.

does anyone have the latest dump? I can’t seem to find any and taking it tuesday. Please email it to me if you do. I would greatly appreciate it. clistpjw (at) gmail dot com

Thanks much

Ricky, sorry I don’t recall them. The very 1st question showed an image of a h.323 and a sip video endpoints connected to a VCS. The question was about the protocol they use and the options was something like h225, h224…cant remember the rest. Know your protocols on VCS and VCS Expressway and understand how they work with cucm.

I also remembered about the trunk set up between VCS and CUCM but don’t remember the options.

Read everything else on this forum and you will pass e.g QoS, ILS and read Nuke post above as I got all those questions.

I must do exam on 27 Oct ……. anything new?

I need the VCS questions 🙂 and QOS

@Parkracer,

Are you have the IT-Libraries 402Q? if, yes. plz, send to me on faisal (dot) saoud (at) hotmail (dot) com

thanks in advance

Thanks Peace
Studying hard for this beast.

Really Thanks an all,
I have to do the Exam in two week, the dump at IT-Libraries is now 490 Q&A,
https://www.itlibraries.com/all-certifications/,
Is the dump engouh to be succes in the Exam
With the best Regards
Taha

Hi Guys,
Just passed today with 888
passleader is enough for passing, the extra question is easy.

Congrats bud
I am studying 391 PL and this forum, will that be sufficient?
Can you share some new questions if you remember?
have a good one!

18. 3 steps when configuring SIP trunk on VCS?
a) configure search rule
b) configure neighbor zone
c) DNS <<<<< Please advise
d) configure SIP trunk
Answer: a, b, c

Cisco Docs:
* Configure a neighbor zone that contains the Unified CM.
* Configure a search rule to route calls to that zone.
* Configure a transform that converts number@ to {email not allowed}in. <<<<< Please advise

* Configure a transform that converts number@ to number @ vcs. domain. <<<<< Please advise

35. Which function research branch office phone via DN in case of WAN outage?
CAC
CFUR
RSVP

What is the answer for this? CFUR? Or all of them?

42. How to configure a SAF client:
a) Setup a MWI
b) Configure a SIP profile
c) Setup a SAF forwarder
d) Directory pattern

Is it letter d only?

Hi Phil,

The answer is b and c

Thank you, Derek! Can you also advise on the following?

18. 3 steps when configuring SIP trunk on VCS?
a) configure search rule
b) configure neighbor zone
c) DNS <<<<< Please advise
d) configure SIP trunk
Answer: a, b, c

Cisco Docs:
* Configure a neighbor zone that contains the Unified CM.
* Configure a search rule to route calls to that zone.
* Configure a transform that converts number@ to number @ vcs. domain. <<<<< Please advise

35. Which function research branch office phone via DN in case of WAN outage?
CAC
CFUR
RSVP
Is the answer is CFUR?

examcollection . com is back!!!

Hi
I had to postpone my exam.
Did anybody write it recently, is PL 391 still valid?

Latest dumps for 300-075 exam can be found here

https://www.itlibraries.com/product/300-075-3/

@ Faisal nope sorry

tomorrow D-DAY!!!!!!!!!

@Parkracer
My D-Day is day after tomorrow, could you please share some new questions after your exam.
I have done only 301 PL dumps and have read this forum. Not sure if that will be enough. If you have some extra material, can you please share it with me
ricky.maverick.1234atgmail.com

FAIL lots of new questions learn VCS this forum is 5% valid 🙁 ……. they think we are CCIE guys grrrrr.

@Parkracer
Did you study the 391 PL Dumps?

@lovecisco Sorry I was too quick found 56 questions from pl391q other was something CUCM cli cpu utiliization command ….. ithink i had a blackout. score 810
I was quite angry who makes these crazy questions.
But forum is 5% valid.

@parkracer
Sorry to hear and wish you luck for next attempt.
How many questions are there in the exam, 80?
56 from dumps, 5% of this forum i.e 4 question, risk of 20 questions.

@ricky 60 questions

@parkracer
ai man i now the feeling i got 795
can you please send me the 391 pdf
lovecisco22 at gmail dot com

@parkracer
ai man i now the feeling i got 795
can you please send me the 391 pdf
lovecisco22 at gmail dot com

Guys I spent $50 on the latest dumps from some website exam-labs, if someone needs them, we can share the cost?
Dumps updated day before yesterday on Oct 27

how many questions @rick ?
Spoto is saying 150USD with 60 questions. Exam-labs has 160 questions in the website.

@Isuekpe i only see 10 now 2016 ????

@globin9979
it has 383 questions.

mail the questions please trolburp add gmail.com thanks all!!!

@rick add gmail com in my name, let’s speak about pay/share

can you chip in only 15 bucks?

@rick 15 bucks is ok. Send me a email. When are you going to do the test?

Hi,
did someone recently write this exam? can you please share some new questions?

@ciscoguy – What questions do you have? PL or something different? Somebody wrote that questions in this forum are not valid anymore.

I dont have pl 391, I bought one from exam docs, these are 383 questions plus a 60q dumps from a friend who recently wrote and passed.

Guys, take care

my exam was today i passed with score 867. PL 391 Questions is not enough at all.i got about 15 Q out of 60 questions, from PL391 dumps so takecare.

@Khaled
brother can you please share some new questions, or any study material
I am writing my exam today, or else my all certifications are bound to expire.

you may check questions posted by nuke & IT-Libraries 402Q. but dun waste time on 391PL

anyone wants 391PL contact me on mail khaled dot fahmy at outlook. but again dont depend it

@Khaled
Did you get my email?

check your email

https://www.dropbox.com/s/g6wr9xcdu3w3cik/300-075.vce?dl=0

VCE Player: https://www.dropbox.com/s/kjyv966qcgc3qe4/VCEPlayer.rar?dl=0

thanks Khaled.
do you remember few new questions on VCS?

Hi Guys,
I just passed the exam with 9XX.
I found all the questions from the dumps.
Couple new questions, one was related to ILS authentication, dont remember another, but was easy

Good luck!

Thanks Khaled

@Ciscoguy
Well done!! is it the 383q or the 391q?

Hi guys
I need to recertify my CCNP Voice. Can you guys tell me which dumps are valid and getting though easily.

9xx, studied only the new dumps from IT-Libraries the ones with 490 questions. only went 2 times over the dumps and it was enough to pass. super ez

Confirming the 490q dumps are valid I got them from here https://www.itlibraries.com/downloads/300-075-2/

good luck all!

I must do exam 210-060 on 10 Nov ……. anything new?

@Matias,
give me your email id, I have a dump file, not sure if it up to date, but might be a good reference.

Passed CCNP COLLABORATION:
Thank for this forum

Instant Download Dumps:
https://rebrand.ly/ccnacc7d5

Hello Jack,

Please send them also to me: {email not allowed}

Thank you

Hello Jack,
Please send them also to me: danielpetrache13 at gmail. com
Thank you

@jackreacher, @k, @jan
could you please share the itlibraries dump and others with me?
jubert.thegeek (at) gmail (dot) com

@jubertthegeek @Dani
Guys, which dumps you need?

Hi all
J
I know this is the CCNP side but i couldn’t find any help on the CCNA side. I have exam scheduled this coming Tuesday, could someone please help me with valid dump for 210- 060 please. medkaloks06@

Hi all

I know this is the CCNP side but i couldn’t find any help on the CCNA side. I have exam scheduled this coming Tuesday, could someone please help me with valid dump for 210- 060 please. medkaloks06@

Shadow
Hi all

I know this is the CCNP side but i couldn’t find any help on the CCNA side. I have exam scheduled this coming Tuesday, could someone please help me with valid dump for 210- 060 please. medkaloks06 @ gmail.com

Hello Everyone,
Kindly Exam-collection back all Cisco dumps with prices but did anyone try any of them that is valid dump or no ? ? ?
please advise.

@jackreacher

300-070 and 300-075 preferably itlibraries dumps please…

https://www.facebook.com/groups/ccnpvoice/?ref=bookmarks

best CCNP Group in facebook

Hello Jack,
Please send valid dupp for 210-060 to me: danielpetrache13 at gmail. com

Thank you

Please send valid dump 300-075 to kdj4life at verizon. net

@Voicehelp do you have something for 210-060?
Please send valid dupp for 210-060 to me: danielpetrache13 at gmail. com

Any update guys for valid dump My CCNP will retired soon

passed today with +-960. I studied the official guide and SRND, and prepared the exam with PL 391 and the questions shared here…So big thanks to all that shared info.

I had about 9-10 questions that hadn’t seen…could save these, (I hadn’t checked the answers, so let them for you to discuss them)

– Device responsible of marking traffic when a cisco phone is connected to switch
+ Core Layer Switch
+ CISCO IP Phone
+ Access Layer Switch
+ Router

– Peer address configured when Expressway E has 1 NIC and something about static NAT
+ CUCM FQDN
+ Expressway E FQDN
+ Expressway E DHCP
+ CUCM DHCP

– sentences about VCS Search and Transfrom
+ Can’t setup rules on SIP and H323 trunks
+ Transforms dont’ use Priority numbers
+ Presearch transforms are applied after call policy is configured but before user policy is applied
+ Presearch transforms are applied before call policy is configured and before user policy is applied
+ Priority is selected from high to low ( 255,254,…)
+ Priority is selected from low to high ( 1,2,…)

– Central CUCM server unreachable, how endpoints identify the IP address to connect to backup
+ CDP
+ SRST router fallback configuration
+ DHP Option 150
+ SRST Reference

– Cli Command to list CPU ussage of all process
+ sh perf query counter partition “% usd”
+ sh perf query counter proccess “process status”
+ sh perf query counter proccess “cpu time”
+ sh network status

– Where in CUCM is ILS configured
I can’t remember the options, some where on class of control,.. but it’s under Advanced Features -> ILS Configuration

Good luck!

@Ray Stantz Could you please tell us which answers did you choose?

Hi. Thanks to Share Ray.
i think this is the answer for each question.
– Device responsible of marking traffic when a cisco phone is connected to switch
+ Core Layer Switch
+ CISCO IP Phone
+ Access Layer Switch
+ Router*

– Peer address configured when Expressway E has 1 NIC and something about static NAT
+ CUCM FQDN
+ Expressway E FQDN*
+ Expressway E DHCP
+ CUCM DHCP

– sentences about VCS Search and Transfrom
+ Can’t setup rules on SIP and H323 trunks
+ Transforms dont’ use Priority numbers
+ Presearch transforms are applied after call policy is configured but before user policy is applied
+ Presearch transforms are applied before call policy is configured and before user policy is applied
+ Priority is selected from high to low ( 255,254,…)
+ Priority is selected from low to high ( 1,2,…)*

– Central CUCM server unreachable, how endpoints identify the IP address to connect to backup
+ CDP
+ SRST router fallback configuration
+ DHP Option 150
+ SRST Reference*

– Cli Command to list CPU ussage of all process
+ sh perf query counter partition “% usd”
+ sh perf query counter proccess “process status”
+ sh perf query counter proccess “cpu time” *
+ sh network status

– Where in CUCM is ILS configured
I can’t remember the options, some where on class of control,.. but it’s under Advanced Features -> ILS Configuration

Pleas share your comments