can anyone pls verify the answers of following from PL391
Q284- Answer need to verify
Q310 – Answer need to verify Pg152 Answer B & C
Q314- Answer need to verify pg 153
Q316 – Answer need to verify Pg 153
Q317 – Answer need to verify pg 154
Q319 – Answer need to verify pg 155
Q326 – Answer need to verify Pg 157
Q328 – Answer need to verify Pg 158
Ccieflyer
December 30th, 2017
Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate external calls, VCS Expressway is deployed and
traversal server zone is set up there. Video endpoints inside Company X have registered, but are unable to receive calls from outside endpoints. Which
option could be the cause of this issue?
A. The traversal zone on the VCS Control does not have a search rule configured.
B. The access control list on the VCS Control must be updated with the IP for the external users.
C. When a traversal zone is set up on VCS Control only outbound calls are possible.
D. The local zone on the VCS Control does not have a search rule configured.
Correct Answer: A or B ?
Bourne
December 31st, 2017
The correct answer to the above question is A.
The traversal zone on the VCS Control does not have a search rule configured.
Bourne
December 31st, 2017
Passed the 300-075 exam recently, a lot of material was covered, thanks to everyone who has contributed with their knowledge. It sure is appreciated.
Happy New Year Everyone
Sandy
December 31st, 2017
@nlmcan you pls share some questions with ya ??
Diablos
January 1st, 2018
Just passed CIPTV2 with 976.
Thanks for all the efforts and comments shared here, I couldn’t make it without you guys.
I used 391q + the questions shared here starting from page 18.
Now is the time to have some rest, Good luck to you.
Happy new year all !!
Tinyau
January 1st, 2018
@Sandy
Would you share the latest PL dumps ?
I need to recert CCNP Voice before Jan-2018.
Please please.
tinyau80220 at gmail
Mohankr
January 2nd, 2018
Today I purchased PL391 from PL. I am planning to take exam on 13th Jan. Will update you ASAP. With PL391 they inserted new questions screenshot also separately.
SAINT-LAGER
January 2nd, 2018
Passed 300-075 exam last week!!! 9xx/1000 points!!!
Mainly learned PassLeader 300-075 dumps (391q~~~NEW VERSION DUMPS!!!), most of new questions are available in it, the most valid 300-075 dumps now!
Part of PassLeader 300-075 dumps are available here:
I made my 300-075 certification in 02-01-2018 with > 900 and the information that i want share is the following :
In my exam only 50% of the questions was from 300-075_391Questions !!
Many questions are listed here at the last 5-7 pages ( thanks to all persons that share the information @Ant,@Beta,@Sandy, etc)
And some questions are new, but they are easy.
You ned read the question with carefuly, because sometimes they are made in other way, but are the question that is in the dump.
Good Luck
Damian Roche
January 2nd, 2018
Passed 300-075 exam last week!!! 9XX/1000 points!!!
I used PassLeader 300-075 dumps (391q~~~NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-075 dumps are available here FYI:
Hi, Anyone given the 300-075 exam recently in january , Pls share your experience, i m going to give exam this week, so will be helpfull. Thanks in advance.
Anonymous
January 3rd, 2018
Hi guys could you help me with this one
You enabled Service Advertisement Framework, Call Control Discovery between your Cisco Unified Communications Manager clusters. You see remote extension as learned DN patterns, but calls are unsuccessful. Which two causes of this issue are likely? (Choose two)
A. Pattern is not defined in hosted DN configuration.
B. Enable SAF is not in SIP trunk configuration.
C. Call Control Discovery partition is not assigned to your Calling Search Space.
D. Enable SAF is not set in H.323 trunk configuration.
E. Advertising Service is blocking pattern
sak
January 3rd, 2018
can anyone please share the latest dumps for 300-075 PL391
email : sakeergbm at gmail
Sandy
January 4th, 2018
AnonymousJanuary 3rd, 2018
Hi guys could you help me with this one
You enabled Service Advertisement Framework, Call Control Discovery between your Cisco Unified Communications Manager clusters. You see remote extension as learned DN patterns, but calls are unsuccessful. Which two causes of this issue are likely? (Choose two)
A. Pattern is not defined in hosted DN configuration.
B. Enable SAF is not in SIP trunk configuration.
C. Call Control Discovery partition is not assigned to your Calling Search Space.
D. Enable SAF is not set in H.323 trunk configuration.
E. Advertising Service is blocking pattern
@anonymus ; my answers are C and E
Singh
January 6th, 2018
@nim
Can you share new questions which cane in exam ? Otherwise there is no use of writing here anything
Reoni
January 6th, 2018
1.- Some of your users report issues when they are dialing extensions located in other branch offices. Sometimes the calls are set up successfully and sometimes users experiences problems during call setup. Which two reasons for the issue are true? (Choose two)
o The remote branch experiences WAN link outages and there is no Forward Unregistered Internal number configured for the remote directory number.
o The Partition that contains the called extensions is not assigned to the line or deice CSS of the calling users.
o The called extension is used only on a device profile for extension mobility and the user has been authenticated to a second phone in a different branch so the calls are delivered randomly to only one of the phones.
o Not enough bandwidth is available between the two locations and Automated Alternate Routing is disable on the cluster.
o A firewall rule blocks traffic between the branch offices so the call setup cannot be completed.
2.- An engineer configured Cisco Extension Mobility for a user. The user can log in to the profile but notices that the extension is not correct. Which component should the engineer check first to verify the user extension?
o SIP Profile
o Device Profile
o Phone Service
o UC Service
o User Profile
what do you think guys??
Hicham
January 6th, 2018
I passed the exam 300-075 the day before yesterday.
The dumps 391 Q & A and the questions posted on this forum are more than enough to succeed.
Hicham
January 6th, 2018
good like friends.
and thank a lot for your help
Sandy
January 7th, 2018
@Reoni
2.- An engineer configured Cisco Extension Mobility for a user. The user can log in to the profile but notices that the extension is not correct. Which component should the engineer check first to verify the user extension?
o SIP Profile
o Device Profile
o Phone Service
o UC Service
o User Profile
My answer is device profile /user profile —— not sure
Victor
January 7th, 2018
1.- Some of your users report issues when they are dialing extensions located in other branch offices. Sometimes the calls are set up successfully and sometimes users experiences problems during call setup. Which two reasons for the issue are true? (Choose two)
o The remote branch experiences WAN link outages and there is no Forward Unregistered Internal number configured for the remote directory number.*
o The Partition that contains the called extensions is not assigned to the line or deice CSS of the calling users.
o The called extension is used only on a device profile for extension mobility and the user has been authenticated to a second phone in a different branch so the calls are delivered randomly to only one of the phones.
o Not enough bandwidth is available between the two locations and Automated Alternate Routing is disable on the cluster.*
o A firewall rule blocks traffic between the branch offices so the call setup cannot be completed.
2.- An engineer configured Cisco Extension Mobility for a user. The user can log in to the profile but notices that the extension is not correct. Which component should the engineer check first to verify the user extension?
o SIP Profile
o Device Profile *
o Phone Service
o UC Service
o User Profile
Victor
January 7th, 2018
@Reoni
ARe these from exam 300-075 new questions ???
Naveed
January 8th, 2018
Naveed is Back with available Voucher + Paid dumps free
Contact (whatapp/IMO) : 0092 321 467 0123
CCNA 26000
CCNP 28000
CCIE 45000
Microsoft 5000
IBM(100$) 8000
DELL(200$) 17000
VMware VCA(105$) 8200
Vmware VCP (205$) 18000
Amazon Web Services AWS Associate (150$) 13000
Amazon Web Services AWS Professional (300$) 27500
Victor
January 9th, 2018
Anbody had given exam today ?? pls let me knwo, i have exam tomorrow !!!!
Pako
January 9th, 2018
I am sorry Victor, I have not done the exam yet, I have scheduled my exam for the 26. However, please, share your experience here after you have done yours.
Victor
January 9th, 2018
@Pakko#
Yes i will, dont worry.
Anonymous
January 9th, 2018
Anyone gave exam today, i have tomm
Please suggest abt paper
I have given exam toda and passed with 953. all from dump q931 and from page 23-26 of voucetut.
Sandy
January 10th, 2018
Sorry q391 I mean
Viv
January 11th, 2018
@Sandy, from where I can get this dump ?
Anonymous
January 12th, 2018
Does any one has a solution for the recently posted questions
robert
January 12th, 2018
67. Refer to the exhibit. These settings are configured on a Cisco TelePresence System EX90. What is the result?
a. The endpoint successfully registers to Cisco VCS as a SIP endpoint
b. The endpoint successfully registers to Cisco VCS as an H.323 endpoint.
c. The endpoint does not register to Cisco VCS as a SIP endpoint, because the domain information is missing
d. The endpoint does not register to Cisco Unified Communications Manager, because the domain information is missing
e. The endpoint successfully registers to Cisco Unified Communications Manager as a SIP endpoint
f. The endpoint successfully registers to Cisco Unified Communications Manager as an H.323 endpoint. *******
kilian
January 12th, 2018
Hi folks,
can anybody pls share the 391q dump. I only managed to find the older 356q PL dump :-/
email: qmsbfpul at 10mail.org
(I am using a dropmail for this purpose to avoid spaming)
robert
January 12th, 2018
sorry, the answer is
67. Refer to the exhibit. These settings are configured on a Cisco TelePresence System EX90. What is the result?
a. The endpoint successfully registers to Cisco VCS as a SIP endpoint
b. The endpoint successfully registers to Cisco VCS as an H.323 endpoint.************
c. The endpoint does not register to Cisco VCS as a SIP endpoint, because the domain information is missing
d. The endpoint does not register to Cisco Unified Communications Manager, because the domain information is missing
e. The endpoint successfully registers to Cisco Unified Communications Manager as a SIP endpoint
f. The endpoint successfully registers to Cisco Unified Communications Manager as an H.323 endpoint.
Reoni
January 12th, 2018
Which two Cisco Unified Communications Manager operations will test reverse DNS lookup? (Choose two)
o Reboot
o Upgrade
o Installation
o Changing IP address or hostname
o Switch version
Anonymous
January 14th, 2018
When you implement the remote failover model, which two guidelines must you observer? (Choose two)
1) If a backup subscriber over the IP WAN is not wanted, then an SRST can be used as a backup call-processing agent
2) You can configure Cisco Unified Communication Manager groups and device pools to allow devices to register with servers over the WAN as a second or third choice
3) Signaling or call control traffic requires low bandwidth when devices are registered across the WAN with a remote Cisco unified Communication Manager server in a different cluster
4) Configure the Cisco unified communication manager groups to have the primary and secondary servers at one site and the tertiary server at a remote site over the WAN
5) A backup publisher over the IP WAN is not wanted, an E-SRST router can be used as a backup call-processing agent
I used PassLeader 300-075 dumps (391q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-075 dumps are available here FYI:
I used Testcollection 642-427 test questions. His 642-427 practice exam really valid and correct answer. Guys, you can also pass the 642-427 exam after using Testcollection 642-427 practice test. https://testcollection.us/ 642-427-vce-download.html
70. Refer to the URL. A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit. The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”. Which configuration requirement supports Cisco EMCC and avoids this error condition?
a. The user must associate a device profile
b. The Cisco IP Phone Service Configuration for Cisco EMCC must set the enterprise subscription
c. The given user ID is not found in the remote cluster
d. The device must be subscribed to Cisco EMCC Services
45. An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one. Which statement can cause of this issue?
a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
Users in your enterprise can establish PSTN calls, but users notice that when they attempt to perform a transfer the call fails. Which two actions must you take to troubleshoot the problem? (Choose two.)
A. Verify that media resources are assigned to the transcoder.
B. Verify that MTP resources are registered with Cisco Unified Communications Manager.
C. Use RTMT Performance monitoring to verify that an MTP device is available to support supplementary services.
D. Restart the Cisco Serviceability tool.
E. Restart Cisco Unified Communications Manager services.
webka
January 18th, 2018
anyone cleared the exam this week and want to share their experience?
robert
January 18th, 2018
17. … remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. Both sites use their local … At the headquarters site, the PSTN prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is … How are … prefix is 112. Here are the deployment policies for roaming devices?
• … phones can roam between two sites
• A roaming softphone uses the local gateway for all PSTN calls
• The user keeps home and dial habits on a roaming softphone, with the exception of the emergency number
When a headquarters user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work. Which setting on CUCM should be checked?
a. DHCP subnet
b. Device Mobility info
c. Device Mobility Group
d. Physical Location
24. …configuration of Intercluster Lookup service, this command is used to look up the URI of a remote cluster user…
… … lookup {email not allowed}
… string is cucm1 cisco.com
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of the remote cluster user?
a. SIP route pattern for domain * acme.com
b. End user with directory URI {email not allowed}
c. SIP trunk with destination cucm1 cisco.com
d. SIP route pattern for domain * cisco.com
26. … support for g711alaw between two different sites. The current configuration is as follows Which two steps do you need to take to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command
27. … tone after dialing a number, the Cisco Unified Communications Manager bandwidth allocation for the location of one of the … they have been exceeded. Which option is true?
a. If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 8k
b. If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 16k
c. If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 16k
If the call is using G.729. Cisco Unified CM subtracts 8k
d. If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 24k
Roshni
January 19th, 2018
Hello guys,
I cleared 🙂 with some decent marks.
All questions were from PL391 and this forum. I read this forum from page 18 till date.
Thank you so much all for posting the latest questions you encountered, and sharing your exam feelings.
My feeling is that the PL and this forum are sufficient to score a 900 + marks.
A few questions in the PL are wrongly answered, which i always had confusion. I think i lost there.
All the best to those you are yet to conquer. The sky is your limit.
webka
January 19th, 2018
Congrats Roshni.
I booked the exam on 28th. do you remember the questions you said you had doubts which you think lost in the exam?
Thanks
sytho
January 20th, 2018
@Sandy
Can you please share PL dumps?
sythorah27 @ gmail
thanks in advance
sytho
January 20th, 2018
@Roshni
Can you please share the PL391?
sythorah27 @ gmail
thanks in advance
ccie-dump
January 22nd, 2018
dumps new
free
cisco
dumps
dot com
teen
January 23rd, 2018
HY friends today i share my Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0) Exam experince with you i get excellent score in my certification exam i learn pass4surekey dumps you can get from https://www.pass4surekey.com/exam/642-457.html
i am sure you pass your exam in first try.
Jack
January 24th, 2018
@webka good luck with your exam & please let us know your exam experience. I’m planning to take exam in early feb.
webka
January 25th, 2018
@Jack sure will let you know.
Mina
January 25th, 2018
@webka
Could you please tell me the material you are using for studying for the exam
My ccnp voice will expire @ 28/1 and I have taken the CCIE written exam to renew my ccnp voice but unfortunately I have discovered lately that I have to renew it using CIPTV2 only.
I wish I can do it before the expiration
Jack
January 25th, 2018
Thanks webka!
@Mina, I’m using PL391 and questions from page 18 -26. my CCNP Voice will expire in April. what about you? when are going for the exam?
webka
January 25th, 2018
@Mina, Same as Jack. however, I am using the exam blue print and learning from Cisco Documents areas I need to understand more.
@Jack , Thanks a lot
I will go for the exam on 28/1
@webka, Thanks a lot
Good luck for us 🙂
Jack
January 25th, 2018
Do you guys know where i can down VCE player?
NiceTeam
January 25th, 2018
Pass exam at first attempt. Save You Huge Exam Fee!!
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
Hello, I have passed my test today. I remember that there was a new question
“What does the call termination reasom code 1 mean in the CCM logs.
Normal call end
Call rejected
And another one about the features of enhanced location based cac.(I dont remember more)
I Hope that could help,
webka
January 26th, 2018
@jack send me your email wabkaa at yahoo dot com
Mina
January 26th, 2018
@Pako
Can you share the material you used, and if u have write down the questions you have collected from here can you share it ?
Jack
January 26th, 2018
@Webka email send it to you.
jacko
January 27th, 2018
Passed my exam with 9xxx
I used passleader 391 recently updated version, and questions from this forum.
Almost every question from this forum was on the exam, I also got the new question Pako got.
Study every question on this forum carefully and you will be ok.
Mina
January 27th, 2018
@jacko , @ anyone have that info
Congratulations , Can you please send me the material u have used on this mail
{email not allowed}
I don’t know if the passleader that i have is the updated one or not
and if u have collected the questions in this forums please send it also
Please if anyone can help
Mina
January 28th, 2018
Please share the material and the collected questions from the forum
mina dot amin86 at hotmail dot com
thanks in advance
Clarkson
January 29th, 2018
It is my luck that I chose the best material at the right time. I am very thankful to Dumps4Download for designing such a helpful material like 642-457 Braindumps. This is a surety to pass in the exam by the first attempt. I will appreciate their work for the betterment of students. 642-457 Questions & Answers have packed the information in the best way. All the material was in easy-to-understand and concise form. I went through the syllabus in very short time. I will suggest to everyone to prepare from 642-457 Study Material for the best results. https://www.dumps4download.com/642-457-dumps.html
I used PassLeader 300-075 dumps (391q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-075 dumps are available here FYI:
can anyone pls verify the answers of following from PL391
Q284- Answer need to verify
Q310 – Answer need to verify Pg152 Answer B & C
Q314- Answer need to verify pg 153
Q316 – Answer need to verify Pg 153
Q317 – Answer need to verify pg 154
Q319 – Answer need to verify pg 155
Q326 – Answer need to verify Pg 157
Q328 – Answer need to verify Pg 158
Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate external calls, VCS Expressway is deployed and
traversal server zone is set up there. Video endpoints inside Company X have registered, but are unable to receive calls from outside endpoints. Which
option could be the cause of this issue?
A. The traversal zone on the VCS Control does not have a search rule configured.
B. The access control list on the VCS Control must be updated with the IP for the external users.
C. When a traversal zone is set up on VCS Control only outbound calls are possible.
D. The local zone on the VCS Control does not have a search rule configured.
Correct Answer: A or B ?
The correct answer to the above question is A.
The traversal zone on the VCS Control does not have a search rule configured.
Passed the 300-075 exam recently, a lot of material was covered, thanks to everyone who has contributed with their knowledge. It sure is appreciated.
Happy New Year Everyone
@nlmcan you pls share some questions with ya ??
Just passed CIPTV2 with 976.
Thanks for all the efforts and comments shared here, I couldn’t make it without you guys.
I used 391q + the questions shared here starting from page 18.
Now is the time to have some rest, Good luck to you.
Happy new year all !!
@Sandy
Would you share the latest PL dumps ?
I need to recert CCNP Voice before Jan-2018.
Please please.
tinyau80220 at gmail
Today I purchased PL391 from PL. I am planning to take exam on 13th Jan. Will update you ASAP. With PL391 they inserted new questions screenshot also separately.
Passed 300-075 exam last week!!! 9xx/1000 points!!!
Mainly learned PassLeader 300-075 dumps (391q~~~NEW VERSION DUMPS!!!), most of new questions are available in it, the most valid 300-075 dumps now!
Part of PassLeader 300-075 dumps are available here:
http://bit.ly/300-075-dumps-online
(391q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
And, part of PassLeader 300-070 dumps are available here FYI:
http://bit.ly/300-070-dumps-online
(228q~~~NEW VERSION DUMPS!!!)
Good Luck!!! Happy New Year!!!
And, part of PassLeader 300-080 dumps are available here FYI:
http://bit.ly/300-080-dumps-online
(248q~~~NEW VERSION DUMPS!!!)
Good Luck!!! Happy New Year!!!
And, part of PassLeader 300-085 dumps are available here FYI:
http://bit.ly/300-085-dumps-online
(186q~~~NEW VERSION DUMPS!!!)
Good Luck!!! Happy New Year!!!
@Diablos
Can you share your experience here ??
I made my 300-075 certification in 02-01-2018 with > 900 and the information that i want share is the following :
In my exam only 50% of the questions was from 300-075_391Questions !!
Many questions are listed here at the last 5-7 pages ( thanks to all persons that share the information @Ant,@Beta,@Sandy, etc)
And some questions are new, but they are easy.
You ned read the question with carefuly, because sometimes they are made in other way, but are the question that is in the dump.
Good Luck
Passed 300-075 exam last week!!! 9XX/1000 points!!!
I used PassLeader 300-075 dumps (391q~~~NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-075 dumps are available here FYI:
http://bit.ly/300-075-dumps-online
(391q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
And, part of PassLeader 300-070 dumps are available here FYI:
http://bit.ly/300-070-dumps-online
(228q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
And, part of PassLeader 300-080 dumps are available here FYI:
http://bit.ly/300-080-dumps-online
(248q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
And, part of PassLeader 300-085 dumps are available here FYI:
http://bit.ly/300-085-dumps-online
(186q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
2018 spoto latest ccna dumps
cciedump.spoto.net/rs-ccna.php
Hi, Anyone given the 300-075 exam recently in january , Pls share your experience, i m going to give exam this week, so will be helpfull. Thanks in advance.
Hi guys could you help me with this one
You enabled Service Advertisement Framework, Call Control Discovery between your Cisco Unified Communications Manager clusters. You see remote extension as learned DN patterns, but calls are unsuccessful. Which two causes of this issue are likely? (Choose two)
A. Pattern is not defined in hosted DN configuration.
B. Enable SAF is not in SIP trunk configuration.
C. Call Control Discovery partition is not assigned to your Calling Search Space.
D. Enable SAF is not set in H.323 trunk configuration.
E. Advertising Service is blocking pattern
can anyone please share the latest dumps for 300-075 PL391
email : sakeergbm at gmail
AnonymousJanuary 3rd, 2018
Hi guys could you help me with this one
You enabled Service Advertisement Framework, Call Control Discovery between your Cisco Unified Communications Manager clusters. You see remote extension as learned DN patterns, but calls are unsuccessful. Which two causes of this issue are likely? (Choose two)
A. Pattern is not defined in hosted DN configuration.
B. Enable SAF is not in SIP trunk configuration.
C. Call Control Discovery partition is not assigned to your Calling Search Space.
D. Enable SAF is not set in H.323 trunk configuration.
E. Advertising Service is blocking pattern
@anonymus ; my answers are C and E
@nim
Can you share new questions which cane in exam ? Otherwise there is no use of writing here anything
1.- Some of your users report issues when they are dialing extensions located in other branch offices. Sometimes the calls are set up successfully and sometimes users experiences problems during call setup. Which two reasons for the issue are true? (Choose two)
o The remote branch experiences WAN link outages and there is no Forward Unregistered Internal number configured for the remote directory number.
o The Partition that contains the called extensions is not assigned to the line or deice CSS of the calling users.
o The called extension is used only on a device profile for extension mobility and the user has been authenticated to a second phone in a different branch so the calls are delivered randomly to only one of the phones.
o Not enough bandwidth is available between the two locations and Automated Alternate Routing is disable on the cluster.
o A firewall rule blocks traffic between the branch offices so the call setup cannot be completed.
2.- An engineer configured Cisco Extension Mobility for a user. The user can log in to the profile but notices that the extension is not correct. Which component should the engineer check first to verify the user extension?
o SIP Profile
o Device Profile
o Phone Service
o UC Service
o User Profile
what do you think guys??
I passed the exam 300-075 the day before yesterday.
The dumps 391 Q & A and the questions posted on this forum are more than enough to succeed.
good like friends.
and thank a lot for your help
@Reoni
2.- An engineer configured Cisco Extension Mobility for a user. The user can log in to the profile but notices that the extension is not correct. Which component should the engineer check first to verify the user extension?
o SIP Profile
o Device Profile
o Phone Service
o UC Service
o User Profile
My answer is device profile /user profile —— not sure
1.- Some of your users report issues when they are dialing extensions located in other branch offices. Sometimes the calls are set up successfully and sometimes users experiences problems during call setup. Which two reasons for the issue are true? (Choose two)
o The remote branch experiences WAN link outages and there is no Forward Unregistered Internal number configured for the remote directory number.*
o The Partition that contains the called extensions is not assigned to the line or deice CSS of the calling users.
o The called extension is used only on a device profile for extension mobility and the user has been authenticated to a second phone in a different branch so the calls are delivered randomly to only one of the phones.
o Not enough bandwidth is available between the two locations and Automated Alternate Routing is disable on the cluster.*
o A firewall rule blocks traffic between the branch offices so the call setup cannot be completed.
2.- An engineer configured Cisco Extension Mobility for a user. The user can log in to the profile but notices that the extension is not correct. Which component should the engineer check first to verify the user extension?
o SIP Profile
o Device Profile *
o Phone Service
o UC Service
o User Profile
@Reoni
ARe these from exam 300-075 new questions ???
Naveed is Back with available Voucher + Paid dumps free
Contact (whatapp/IMO) : 0092 321 467 0123
CCNA 26000
CCNP 28000
CCIE 45000
Microsoft 5000
IBM(100$) 8000
DELL(200$) 17000
VMware VCA(105$) 8200
Vmware VCP (205$) 18000
Amazon Web Services AWS Associate (150$) 13000
Amazon Web Services AWS Professional (300$) 27500
Anbody had given exam today ?? pls let me knwo, i have exam tomorrow !!!!
I am sorry Victor, I have not done the exam yet, I have scheduled my exam for the 26. However, please, share your experience here after you have done yours.
@Pakko#
Yes i will, dont worry.
Anyone gave exam today, i have tomm
Please suggest abt paper
2018 latest ccna dumps http://cciedump.spoto.net/rs-ccna.php
I have given exam toda and passed with 953. all from dump q931 and from page 23-26 of voucetut.
Sorry q391 I mean
@Sandy, from where I can get this dump ?
Does any one has a solution for the recently posted questions
67. Refer to the exhibit. These settings are configured on a Cisco TelePresence System EX90. What is the result?
a. The endpoint successfully registers to Cisco VCS as a SIP endpoint
b. The endpoint successfully registers to Cisco VCS as an H.323 endpoint.
c. The endpoint does not register to Cisco VCS as a SIP endpoint, because the domain information is missing
d. The endpoint does not register to Cisco Unified Communications Manager, because the domain information is missing
e. The endpoint successfully registers to Cisco Unified Communications Manager as a SIP endpoint
f. The endpoint successfully registers to Cisco Unified Communications Manager as an H.323 endpoint. *******
Hi folks,
can anybody pls share the 391q dump. I only managed to find the older 356q PL dump :-/
email: qmsbfpul at 10mail.org
(I am using a dropmail for this purpose to avoid spaming)
sorry, the answer is
67. Refer to the exhibit. These settings are configured on a Cisco TelePresence System EX90. What is the result?
a. The endpoint successfully registers to Cisco VCS as a SIP endpoint
b. The endpoint successfully registers to Cisco VCS as an H.323 endpoint.************
c. The endpoint does not register to Cisco VCS as a SIP endpoint, because the domain information is missing
d. The endpoint does not register to Cisco Unified Communications Manager, because the domain information is missing
e. The endpoint successfully registers to Cisco Unified Communications Manager as a SIP endpoint
f. The endpoint successfully registers to Cisco Unified Communications Manager as an H.323 endpoint.
Which two Cisco Unified Communications Manager operations will test reverse DNS lookup? (Choose two)
o Reboot
o Upgrade
o Installation
o Changing IP address or hostname
o Switch version
When you implement the remote failover model, which two guidelines must you observer? (Choose two)
1) If a backup subscriber over the IP WAN is not wanted, then an SRST can be used as a backup call-processing agent
2) You can configure Cisco Unified Communication Manager groups and device pools to allow devices to register with servers over the WAN as a second or third choice
3) Signaling or call control traffic requires low bandwidth when devices are registered across the WAN with a remote Cisco unified Communication Manager server in a different cluster
4) Configure the Cisco unified communication manager groups to have the primary and secondary servers at one site and the tertiary server at a remote site over the WAN
5) A backup publisher over the IP WAN is not wanted, an E-SRST router can be used as a backup call-processing agent
Does any one know the answer to this question , seems to me that 1,2 and 4 are correct based on this https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/models.html#59672
Passed 300-075 exam recently!!! 9XX/1000 points!!!
I used PassLeader 300-075 dumps (391q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-075 dumps are available here FYI:
http://bit.ly/300-075-dumps-online
(391q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, part of PassLeader 300-070 dumps are available here for your reference:
http://bit.ly/300-070-dumps-online
(228q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, part of PassLeader 300-080 dumps are available here for your reference:
http://bit.ly/300-080-dumps-online
(248q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, part of PassLeader 300-085 dumps are available here for your reference:
http://bit.ly/300-085-dumps-online
(186q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
Hello Seamie
What do you mean by ~~~2018 NEW VERSION DUMPS!!!) , Is this different than the questions mentioned on this site ?
new ccie lab dumps
http://cciedump.spoto.net/ccie-rs-lab.php
Every question are available in https://testcollection.us/642-457-vce-download.html. Friends you can easily pass the 642-457 exam after his test questions
I used Testcollection 642-427 test questions. His 642-427 practice exam really valid and correct answer. Guys, you can also pass the 642-427 exam after using Testcollection 642-427 practice test. https://testcollection.us/ 642-427-vce-download.html
Hi , I cant download nothing from this link , can someone help me?
https://drive.google.com/open?id=1mzEpj52J5IYXJh6eG0-yaFlPWr4A7dRU
70. Refer to the URL. A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit. The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”. Which configuration requirement supports Cisco EMCC and avoids this error condition?
http://172.16.1.1:8080/emapp/EMAppServlet?device=#DEVICENAME#%EMCC=#EMCC#
a. The user must associate a device profile
b. The Cisco IP Phone Service Configuration for Cisco EMCC must set the enterprise subscription
c. The given user ID is not found in the remote cluster
d. The device must be subscribed to Cisco EMCC Services
45. An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one. Which statement can cause of this issue?
a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
2018 latest CCIE Dumps
freeciscodumps.com/rs-ccie.php
Download All Cisco CCNA, CCIE, CCIE etc updated Question Answers available here in PDF: https://dumpsgator.com/vendor/Cisco-braindumps-questions
Users in your enterprise can establish PSTN calls, but users notice that when they attempt to perform a transfer the call fails. Which two actions must you take to troubleshoot the problem? (Choose two.)
A. Verify that media resources are assigned to the transcoder.
B. Verify that MTP resources are registered with Cisco Unified Communications Manager.
C. Use RTMT Performance monitoring to verify that an MTP device is available to support supplementary services.
D. Restart the Cisco Serviceability tool.
E. Restart Cisco Unified Communications Manager services.
anyone cleared the exam this week and want to share their experience?
17. … remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. Both sites use their local … At the headquarters site, the PSTN prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is … How are … prefix is 112. Here are the deployment policies for roaming devices?
• … phones can roam between two sites
• A roaming softphone uses the local gateway for all PSTN calls
• The user keeps home and dial habits on a roaming softphone, with the exception of the emergency number
When a headquarters user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work. Which setting on CUCM should be checked?
a. DHCP subnet
b. Device Mobility info
c. Device Mobility Group
d. Physical Location
24. …configuration of Intercluster Lookup service, this command is used to look up the URI of a remote cluster user…
… … lookup {email not allowed}
… string is cucm1 cisco.com
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of the remote cluster user?
a. SIP route pattern for domain * acme.com
b. End user with directory URI {email not allowed}
c. SIP trunk with destination cucm1 cisco.com
d. SIP route pattern for domain * cisco.com
26. … support for g711alaw between two different sites. The current configuration is as follows Which two steps do you need to take to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command
27. … tone after dialing a number, the Cisco Unified Communications Manager bandwidth allocation for the location of one of the … they have been exceeded. Which option is true?
a. If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 8k
b. If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 16k
c. If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 16k
If the call is using G.729. Cisco Unified CM subtracts 8k
d. If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 24k
Hello guys,
I cleared 🙂 with some decent marks.
All questions were from PL391 and this forum. I read this forum from page 18 till date.
Thank you so much all for posting the latest questions you encountered, and sharing your exam feelings.
My feeling is that the PL and this forum are sufficient to score a 900 + marks.
A few questions in the PL are wrongly answered, which i always had confusion. I think i lost there.
All the best to those you are yet to conquer. The sky is your limit.
Congrats Roshni.
I booked the exam on 28th. do you remember the questions you said you had doubts which you think lost in the exam?
Thanks
@Sandy
Can you please share PL dumps?
sythorah27 @ gmail
thanks in advance
@Roshni
Can you please share the PL391?
sythorah27 @ gmail
thanks in advance
dumps new
free
cisco
dumps
dot com
HY friends today i share my Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0) Exam experince with you i get excellent score in my certification exam i learn pass4surekey dumps you can get from https://www.pass4surekey.com/exam/642-457.html
i am sure you pass your exam in first try.
@webka good luck with your exam & please let us know your exam experience. I’m planning to take exam in early feb.
@Jack sure will let you know.
@webka
Could you please tell me the material you are using for studying for the exam
My ccnp voice will expire @ 28/1 and I have taken the CCIE written exam to renew my ccnp voice but unfortunately I have discovered lately that I have to renew it using CIPTV2 only.
I wish I can do it before the expiration
Thanks webka!
@Mina, I’m using PL391 and questions from page 18 -26. my CCNP Voice will expire in April. what about you? when are going for the exam?
@Mina, Same as Jack. however, I am using the exam blue print and learning from Cisco Documents areas I need to understand more.
Can someone sent me last dumps or last pdf to {email not allowed} , because I cant download from https://drive.google.com/open?id=17semHqGmkJVoDxpTdD5s7fzFILS-bXVZ
Thank you in advance
my email is csa2835688 at gmail dot com
sory may email is csa2835atgmail.com
@Jack , Thanks a lot
I will go for the exam on 28/1
@webka, Thanks a lot
Good luck for us 🙂
Do you guys know where i can down VCE player?
Pass exam at first attempt. Save You Huge Exam Fee!!
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
Instant Download Latest Dumps:
https://docs.google.com/document/d/1qVfGQ3eWc81pGKEN5NFkLW-SoW2NAjHsijf0Gp4EcR4/edit?usp=sharing
latest ccna dumps
http://www.dumpspro.com/ccna-dumps
Hello, I have passed my test today. I remember that there was a new question
“What does the call termination reasom code 1 mean in the CCM logs.
Normal call end
Call rejected
And another one about the features of enhanced location based cac.(I dont remember more)
I Hope that could help,
@jack send me your email wabkaa at yahoo dot com
@Pako
Can you share the material you used, and if u have write down the questions you have collected from here can you share it ?
@Webka email send it to you.
Passed my exam with 9xxx
I used passleader 391 recently updated version, and questions from this forum.
Almost every question from this forum was on the exam, I also got the new question Pako got.
Study every question on this forum carefully and you will be ok.
@jacko , @ anyone have that info
Congratulations , Can you please send me the material u have used on this mail
{email not allowed}
I don’t know if the passleader that i have is the updated one or not
and if u have collected the questions in this forums please send it also
Please if anyone can help
Please share the material and the collected questions from the forum
mina dot amin86 at hotmail dot com
thanks in advance
It is my luck that I chose the best material at the right time. I am very thankful to Dumps4Download for designing such a helpful material like 642-457 Braindumps. This is a surety to pass in the exam by the first attempt. I will appreciate their work for the betterment of students. 642-457 Questions & Answers have packed the information in the best way. All the material was in easy-to-understand and concise form. I went through the syllabus in very short time. I will suggest to everyone to prepare from 642-457 Study Material for the best results. https://www.dumps4download.com/642-457-dumps.html
@Webka & @mina How was your exam? did you pass?
This are 100% https://www.itlibraries.com/product/300-075-3/
Good luck!
Most questions here are valid too.
I didn’t take the exam
@Jack
When you will take the exam ?
@Mina, planning mid feb, How about you?
any updates from Webka?
Any update???
300-075 exam, any update???
Please share valid 300-075 dumps, help me.
New 300-075 dumps, please share.
Thanks!!!
Anyone kindly uploading the latest 300-075 dumps???
Thanks in advance!!!
Anyone share your exam passing tips???
Please share~~~I need the newest 300-075 dumps.
Thanks all.
Passed 300-075 exam recently!!! 9XX/1000 points!!!
I used PassLeader 300-075 dumps (391q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-075 dumps are available here FYI:
http://bit.ly/300-075-dumps-online
(391q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!