[(copy those links and open them in your web browser!!!)]
Anonymoz
June 24th, 2019
So many robots here. I will take the exam next week and update also.
But if their are any people took the exam the latest.
Please help us.
Brett Knewman
June 24th, 2019
Anonymoz, I will say the 459Q that I’ve seen passed around here that is from 2018 will only get you so far. If you just use that, you will NOT pass. It has many old questions that are no longer on the exam, as well as missing a bunch of new questions.
Good luck.
PASS
June 24th, 2019
I Pass June 20th , 860 , wityh PL 459 Q
appears like 15 new questions in this link shorturl.at/EFJO9
WeNt
June 24th, 2019
Brett if you was taking exam recently can you tell us what they are asking about now? some tips and tricks, what we should focus on while preparing? If you don’t want to share questions with us, then just share your thoughts. Definetly it will help some of us!
Thanks in advance.
Anonymous
June 25th, 2019
NEW QUESTION 106
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef
Answer: B
NEW QUESTION 107
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)
A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.
Answer: CE
NEW QUESTION 116
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.
Answer: A
NEW QUESTION 117
Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RASenabled
endpoint that originates from an external zone?
A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS
Answer: C
QUESTION 124
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)
A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.
Answer: BE
NEW QUESTION 128
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: AC
Answer: AC
NEW QUESTION 131
Which two options should be used to create a secure traversal zone between the Expressway-C and
Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Answer: AC
NEW QUESTION 134
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence
endpoints?
A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)
Answer: D
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 154
Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered oefn both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints
registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zeone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: AC
Passed Successfully
June 25th, 2019
Passed Successfully Thank You i download your file and today i passed the exam
.
Thank You again god bless you
Just Remove 2 Stars** get file
https:/*/eze*e.link/Q4ip0SG4xT
Anonymous
June 25th, 2019
EW QUESTION 154
Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-fwof-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
Brett Knewman
June 25th, 2019
@WeNT
My exam focused heavily on VCS/Expressway. Make sure you know that stuff well. As for the 459Q being passed around on here, it is older (I’ve seen 2018). I saw maybe 15% of those questions on the exam I had. The only reason I passed that exam is because I have real world experience. If you are trying to pass based only off that outdated dump being passed around here, it would be very difficult to do so…not impossible, but improbable IMO.
PASS
June 25th, 2019
new questions
1. A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device profile.
However, the user logs into a Cisco 8941, which device profile will be used?
2. Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
Mobility Profile
Answer Too Soon timer
Remote Destination Profile
Enable Mobile Connect***
3. Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
unique phone service for each Cisco Unified Communications Manager server
automatically handled by Cisco Unified Communications Manager
server load balancer virtual IP *****
DNS A record with multiple IPs listed
4. In Cisco Unified Communications Manager region configuration, you have “Maximum Audio Bit Rate” set to 256 kbps between region A and region B.
Which description is true?
If the total bandwidth for all calls between region A and B goes beyond 256 kbps, Cisco Unified
Communications Manager starts to drop calls.
A single call between region A and B uses bandwidth of exactly 256 kbps.
The total bandwidth for all calls between region A and B uses up to 256 kbps.
A single call between region A and B uses bandwidth of up to 256 kbps.*****
5. Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
7. QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
AF41 (34)
EF (46)
CS4 (32)
CS3 (24)*****
PASS
June 25th, 2019
aqui vienen todas
shorturl.at/alFLP
Anonymous
June 27th, 2019
share
The best preparation for the Cisco exam, I passed the cisco exam with the help of it.
http:/**/c7.gg/fCXw8
Anonymous
June 29th, 2019
18. Which two types of call causes the user to hear the reorder tone? (Choose two.) (was on the exam)
a) restricted call ———->correct
b) call using a non-Cisco phone
c) call to a number that is working but is unlisted
d) unrestricted call
e) call to number that has been blocked ———->correct
19. An engineer is investigating voice quality degradationon calls passing through a particular SIP gateway. To father the necesarry information, simple traffic captures are taken. (was on the exam)
Which information in the capture reveals the problem?
a) version
b) destination port
c) ToS bits——->correct (not sure)
d) MTU
20. In a network with two Cisco Unified Communications Manager clusters, Phone 1 on Cluster A dials {email not allowed} to reach Phone 2 on Cluster B, and the call fails.
What are two possible causes for this problem? (Choose two) (was on the exam)
a) The calling search space on Phone 1 contains the partitions with a pattern that matches {email not allowed}
b) Cisco UDS is not enabled on Cluster B —->correct (not sure)
c) Cisco UDS is not enabled on Cluster A
d) Cluster A does not have a SIP trunk to reach Cluster B—->correct (not sure)
e) Cluster B does not have a SIP trunk to reach Cluster A
21. Company XYZ just completed an upgrade of the Cisco Unified Communications Manager from version 9.X to version 10.5 Users report that they cannot log in to Extension Mobility after the upgrade.
This error message is displayed ” login is unavailable (23)” Which action can resolve the issue? (was on the exam)
a) Re-enable extension mobility for the affected users
b) Cisco Unified Communications Manager 10.5 does not include Extension Mobility
c) Enable the remote cluster option for the affected users
d) Enable the home cluster option for the affected users —->correct
7. 1. Refer to the exhibit inbound calls via a SIP trunk to the Cisco IP phones that are registered on Cisco Unified Communications Manager are failing.
Based on the Cisco CallManager service trace, which action should you take to fix the issue? (was on the exam)
a) Add xyz.com in the Organization Top level Domain field on Cisco Unified Communications Manager
b) Set the incoming Transport Type to TLS on the SIP trunk security profile that is assigned to the SIP trunk
c) Check whether the calling search space for incoming calls on the Sip Trunk has access to the partition of the Cisco IP phone that is being called
d) Add vcs.abc.org in the Organization Top Level Domain Field on Cisco Unified Communications Manager
When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration? (was on the exam)
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.
Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information?(was on the exam)
A. location controller
B. route pattern
C. route string
D. URI
SIP 15 min timeout question: SESSION REFRESH
Based on the ACK SDP output, what can be concluded? (was on the exam)
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
xd This event is a multipoint video call with three participants.
A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. (was on the exam /2 questions/)
Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911.
At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work.
Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group
a. The device pool contains more call processing agents in the CMO group than the endpoint can support (was on the exam)
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support ——>correct
d. MRGL contains more media groups than the endpoint can support
Q27 Refer to the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder. (was on the exam)
What is the root cause of the issue?
a. The client SAF label is incorrectly configured
b. The SAF port is incorrectly configured
c. The SAF password is incorrectly configured ———>correct (not sure)
d. The packets are being corrupted on the network
e. The packets are being dropped on the network
48. Refer to the exhibit. In this CUCM dial-plan, a localized translation pattern 9.1[2-0]XX[2-0]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. (was on the exam)
The translation pattern is used to globalize the Users dialed digits followed by matching a \+1 Route Pattern as seen in the exhibit.
Users with DeviceLines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678300 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
a. Route Pattern does not have “Urgent Priority” checked—–>correct
b. Translation Pattern does not have “Urgent Priority” checked —–>correct
c. Translation Pattern has “Provide Outside Dial Tone” checked
d. Route Pattern does not have “Allow Overlap Sending” checked
e. Route Pattern Call Classification set to OffNet
Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)
A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct
SAF not registering check the config, (was on the exam)
username/password etc,
The extension mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?: (was on the exam)
User profile
Device Profile
And others
1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot the problem?(choose two) (was on the exam)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk
8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)
1.Which debug command analyzes messages that are produced by SIP during the call setup process in IOS? (was on the exam)
A:Debug ccsip messages
one dbreplication question: what does the reply of the status command mean? My answer: a synch problem in the one of the tables;
how do you prevent echo and choppy audio: my answer—->QoS and Echo Canceller;
a really long question about translation rules and how do you preserve a dialing habits in SRST mode. They want to configure a translation profile under CCM falback mode. Please bear in mind here the directions are reverted not like in dial peers;
G711, G729, G723 bandwidth question. How much the CUCM will substract (two questions);
Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
x Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was not activated.
d An H.323 SAF trunk was configured instead of a SIP SAF trunk
e CCD advertising service was not activated.
How do you block external transfers on the CUCM? Ans: enable ‘block offnet to offnet transfer feature’
An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one.
Which statement can cause of this issue? (was on the exam)
X a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone whwrere Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit.
The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”.
Which configuration requirement supports Cisco EMCC and avoids this error condition?
VALID DUMPS
June 29th, 2019
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam.
Share latest examm Questions enjoy
Without 1 ***
https:/*/ezee.link/Q4ip0SG4xT
Anonymous
June 29th, 2019
How do you block external transfers on the CUCM? Ans: enable ‘block offnet to offnet transfer feature’
An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one.
Which statement can cause of this issue? (was on the exam)
X a. No valid release key is idnstalled on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
saleem
June 29th, 2019
@Brett
and any brothers can advice me for the best dump can shared to pass the exam 300-075 it will highly appreciated
I have read the materials 4 times with old version of INE Please I need to pass before the expiration and to fined a job
my email kindly: eng.fadi80 at gmail dot com
Thanks for help
Tair Yunussov
July 1st, 2019
Congratulations!!!
Passed 300-075 exam on 27/June/2019 with 9xx.
PassLeader 459q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing!
Thanks a lot!
+1
+1
+1
+1
p.s.
Taking the 300-075 exam ASAP, the exam will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
Tair Yunussov
July 1st, 2019
P.S.
1. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(459q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Tair Yunussov
July 1st, 2019
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
KoenMay
July 1st, 2019
Hi @Anonymous for you help in 300 070, now I go for 300 075, I have a dump but I think is old with 246 questions so could you share me some dump please? or some else?
koenmay at outlook dot com
Regards
SPINEDA
July 2nd, 2019
Hello forum,
I am certifying and I want to recover some money, I send the exams for 20 Dolares each one by Paypal.
300-070 – Implementing Cisco IP Telephony & Video, Part 1 v1.0
305 Q&As
300-075 – Implementing Cisco IP Telephony & Video, Part 2 v1.0
459 Q&As
18. Which two types of call causes the user to hear the reorder tone? (Choose two.) (was on the exam)
a) restricted call ———->correct
b) call using a non-Cisco phone
c) call to a number that is working but is unlisted
d) unrestricted call
e) call to number that has been blocked ———->correct
19. An engineer is investigating voice quality degradationon calls passing through a particular SIP gateway. To father the necesarry information, simple traffic captures are taken. (was on the exam)
Which information in the capture reveals the problem?
a) version
b) destination port
c) ToS bits——->correct (not sure)
d) MTU
20. In a network with two Cisco Unified Communications Manager clusters, Phone 1 on Cluster A dials {email not allowed} to reach Phone 2 on Cluster B, and the call fails.
What are two possible causes for this problem? (Choose two) (was on the exam)
a) The calling search space on Phone 1 contains the partitions with a pattern that matches {email not allowed}
b) Cisco UDS is not enabled on Cluster B —->correct (not sure)
c) Cisco UDS is not enabled on Cluster A
d) Cluster A does not have a SIP trunk to reach Cluster B—->correct (not sure)
e) Cluster B does not have a SIP trunk to reach Cluster A
21. Company XYZ just completed an upgrade of the Cisco Unified Communications Manager from version 9.X to version 10.5 Users report that they cannot log in to Extension Mobility after the upgrade.
This error message is displayed ” login is unavailable (23)” Which action can resolve the issue? (was on the exam)
a) Re-enable extension mobility for the affected users
b) Cisco Unified Communications Manager 10.5 does not include Extension Mobility
c) Enable the remote cluster option for the affected users
d) Enable the home cluster option for the affected users —->correct
7. 1. Refer to the exhibit inbound calls via a SIP trunk to the Cisco IP phones that are registered on Cisco Unified Communications Manager are failing.
Based on the Cisco CallManager service trace, which action should you take to fix the issue? (was on the exam)
a) Add xyz.com in the Organization Top level Domain field on Cisco Unified Communications Manager
b) Set the incoming Transport Type to TLS on the SIP trunk security profile that is assigned to the SIP trunk
c) Check whether the calling search space for incoming calls on the Sip Trunk has access to the partition of the Cisco IP phone that is being called
d) Add vcs.abc.org in the Organization Top Level Domain Field on Cisco Unified Communications Manager
When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration? (was on the exam)
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.
Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information?(was on the exam)
A. location controller
B. route pattern
C. route string
D. URI
SIP 15 min timeout question: SESSION REFRESH
Based on the ACK SDP output, what can be concluded? (was on the exam)
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
xd This event is a multipoint video call with three participants.
A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. (was on the exam /2 questions/)
Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911.
At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work.
Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group
a. The device pool contains more call processing agents in the CMO group than the endpoint can support (was on the exam)
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support ——>correct
d. MRGL contains more media groups than the endpoint can support
Q27 Refer to the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder. (was on the exam)
What is the root cause of the issue?
a. The client SAF label is incorrectly configured
b. The SAF port is incorrectly configured
c. The SAF password is incorrectly configured ———>correct (not sure)
d. The packets are being corrupted on the network
e. The packets are being dropped on the network
48. Refer to the exhibit. In this CUCM dial-plan, a localized translation pattern 9.1[2-0]XX[2-0]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. (was on the exam)
The translation pattern is used to globalize the Users dialed digits followed by matching a \+1 Route Pattern as seen in the exhibit.
Users with DeviceLines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678300 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
a. Route Pattern does not have “Urgent Priority” checked—–>correct
b. Translation Pattern does not have “Urgent Priority” checked —–>correct
c. Translation Pattern has “Provide Outside Dial Tone” checked
d. Route Pattern does not have “Allow Overlap Sending” checked
e. Route Pattern Call Classification set to OffNet
Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)
A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct
SAF not registering check the config, (was on the exam)
username/password etc,
The extension mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?: (was on the exam)
User profile
Device Profile
And others
1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot the problem?(choose two) (was on the exam)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk
8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)
1.Which debug command analyzes messages that are produced by SIP during the call setup process in IOS? (was on the exam)
A:Debug ccsip messages
one dbreplication question: what does the reply of the status command mean? My answer: a synch problem in the one of the tables;
how do you prevent echo and choppy audio: my answer—->QoS and Echo Canceller;
a really long question about translation rules and how do you preserve a dialing habits in SRST mode. They want to configure a translation profile under CCM falback mode. Please bear in mind here the directions are reverted not like in dial peers;
G711, G729, G723 bandwidth question. How much the CUCM will substract (two questions);
Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
x Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was wqdnot activated.
d An H.323 SAF trunk was configured instead of a SIP SAF trunk
e CCD advertising service was not activated.
Anonymous
July 3rd, 2019
https:/*/hide*uri.*co*m/xdMM8X
VALID DUMPS QUESTIONS
July 3rd, 2019
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Without stars ***
https:/*/hide*uri.*co*m/xdMM8X
franledo
July 3rd, 2019
Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)
A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires2 Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct
SAF not registering check the config, (was on the exam)
username/password etc,e
DumpsGuy
July 5th, 2019
Check this one out Q476
h*tt*ps*:*//w*e.*tl/t*-RpzQi*f7*TXQ
–> Remove stars
–> Let me know how it turns out
kong (300-075)
July 7th, 2019
The questions posted by “Anonymous” (July 3rd) did not appear on the exam 300-075 but the q’s posted by “Pass” (25th of June) did. Some of the answers are wrong I think.
Chris
July 7th, 2019
Hi Kong, what about the one posted by DumpsGuy on July 5?
Carlos Fernandes
July 8th, 2019
Congratulations!!!
Passed 300-075 exam on 3/July/2019 with 9xx.
PassLeader 459q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing!
Thanks a lot!
+1
+1
+1
+1
p.s.
Taking the 300-075 exam ASAP, the exam will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
Carlos Fernandes
July 8th, 2019
P.S.
1. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(459q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Carlos Fernandes
July 8th, 2019
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Saleem
July 9th, 2019
@kong, @Chris
and any brothers can advice me for the best dump can shared to pass the exam 300-075 it will highly appreciated
I have read the materials 4 times with old version of INE Please I need to pass before the expiration and to fined a job
my email kindly: eng.fadi80 at gmail dot com
Thanks for help
Anonymous
July 11th, 2019
NEW QUESTION 104
Which type of endpoints support the DSCP for Video Calls parameter in Cisco Unified CM?
A. only Cisco Telepresence endpoints
B. any video capable device
C. only Jabber
D. only Cisco UC video endpoints
Answer: B
NEW QUESTION 106
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef
Answer: B
NEW QUESTION 107
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)
A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.
Answer: CE
NEW QUESTION 116
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.
Answer: A
NEW QUESTION 117
Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RASenabled
endpoint that originates from an external zone?
A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS
Answer: C
QUESTION 124
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)
A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.
Answer: BE
NEW QUESTION 128
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: AC
Answer: AC
NEW QUESTION 131
Which two options should be used to create a secure traversal zone between the Expressway-C and
Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Answer: AC
NEW QUESTION 134
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence
endpoints?
A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)
AnswerDA: D
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 154
Which option is Aa benefit of implementing CFUR?
A. CFUR is desigDned to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints
registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS CondQfiguration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: AC
Youki Free File.
July 11th, 2019
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Erase 2 Star***
https:/*/hec.s*u/jZr6
james
July 11th, 2019
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Aadpplication Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
Bill Watkins
July 11th, 2019
The new PassLeader 300-075 dumps (July/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 466
A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device profile. However, the user logs into a Cisco 8941, which device profile will be used?
A. 8941 default device profile
B. 8851 default device profile
C. the 8851 device profile
D. universal device profile
Answer: D
NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect
Answer: D
NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed
Answer: C
NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch
Answer: A
NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?
A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone
Answer: A
NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)
Answer: D
NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?
A. 0
B. 30
C. 120
D. 60
Answer: C
NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.
Answer: C
NEW QUESTION 482
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
Bill Watkins
July 11th, 2019
BTW:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
kloo123121
July 12th, 2019
Hello there Today pass the exam with 912
https:/**/*hideuri.c*o*m*/*qJJOdJ
Anonymous
July 15th, 2019
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI appslications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
Passed Exam $uccessfully
July 15th, 2019
I made it today with 9xx/1000, everything here is valid!
You are a network administrator tasked with configuring the device security for a single device. What is the result of you configurig the new device security mode in the phone configuration window of Cisco Unified Communications Manager?
A a rebuild of device configuration.exe file
B an automatic reboot of the entire duster
C an automatic connection to the security mode database
D rebuild of the device configuration.xml file
?
An engineer must generate a report of Cisco Unified Communications Manager usage for cadpacitqsy planning. Where can this information be obtained within System reports?
A precedence call
B voice usage
C user usage
D traffic
?
KL
July 15th, 2019
@ DumpsGuy
the file is already removed in this link:
h*tt*ps*:*//w*e.*tl/t*-RpzQi*f7*TXQ
Can u share it again? Thanks…
SPINEDA
July 15th, 2019
Hello forum,
I just passed the CIPTV2 exam, I was very good 91X.
I used the 459Q guide and 14 are new. I corrected the guide and added the reference lnk. If someone wants it, I am selling it for 10 Dollars to recover some money.
Contact me at ing.spineda a t g m a i l d o t c o m
I also want to help you pass.
In another forum I read a couple of key questions that helped me pass and I want to share them with you plus a couple more that I remember coming out.
I do this because the forum helped me several times and I want to pay for it.
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load virtual balancer IP
D. DNS A record with multiple IPs listed
Answer: C
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/cmapps.html#37411
Which is the default SRST Certificate Provider port?
A. 5060
B. 2445
C. 16236
D. 2000
Answer: B
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b02srst.pdf
Imagine you configured several zones for device registration on Cisco VCS.
To which top zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
An engineer opens up to TAC case and wants to implement CCD / SAF service.
Which menu navigation sequence must an engineer navigate to when configuring a hosted DN pattern?
A. Call Routing> Call Control Discovery> Hosted DN Pattern
B. Advanced Features> SAF> Hosted DN Pattern
C. Call Routing> SAF> Hosted DN Pattern
D. Advanced Features> Call Control Discovery> Hosted DN Pattern
Answer: A
Validated in CUCM.
What is the maximum allowed round-trip between Cisco Unified Communication Manager nodes?
A. 150 ms
B. 40 ms
C. 500 ms
D. 80 ms
Answer: D
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/models.html#wp1044021
Which field must be populated to assign to default directory URI partition in Communication Manager?
A. Directory URI Alias Partition
B. Alias URI Directory Partition
C. Alias URI Partition
D. Directory URI Partition
Answer: A
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_cucm-system-guide-90/CUCM_BK_CD2F83FA_00_system-guide_chapter_0101111.pdf
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Feature Safe
B. Size Safe
C. Call Display Restriction Features
D. CUCM Assistant Features
Answer: B
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsgd-861-cm/fsem.html
For which two reasons should you mark AF41 as the audio and video channels of a video call?
A. to allow high-definition quality calls over low-speed links
B. to give video calls to higher priority than AF41 in the QoS policy
C. to provide separate classes for audio-only calls and video calls
D. to prioritize video over other high-priority traffic classes
E. to preserve lip synchronization between the audio and video channels
Answer: DE
Most likely
365. An engineer must ensure that Expressway-E listens and only its legitimate sender of such traffic is Expressway-C. Which port must be opened to accomplish this task?
A. 2000
B. 2111
C. 2222
D. 2333
Answer: C
Validated
cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Cisco-Expressway-IP-Port-Usage-for-Firewall-Traversal-Deployment- Guide-X8-9-2.pdf
How many hosted DN patterns per cluster does Cisco Unified Communications Manager allow you to configure?
A. 5000
B. 10000
C. 1500
D. 2000
E. 2500
Answer: B
Validated
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100. html
What is the default value for the Drop Ad Hoc Conference service parameter?
A. Never
B. When No On-Net Parties Remain in the Conference
C. When No Off-Net Parties Remain in the Conference
D. Drop Ad Hoc Conference When Creator Leaves
Answer: A
Validated in CUCM
353. Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
TO.
policy-map policy1
class class1
set ip dscp 5
class class2
set ip dscp C S3
B.
policy-map policy1
class class1
set ip dscp ef
class class2
set ip dscp 5
C.
policy-map policy1
class class1
set ip dscp 5
class class2
set ip dscp ef
D.
policy-map policy1
class class1
set ip dscp 3
class class2
set ip dscp ef
Answer: B
Ambiguous if it goes first EF or 5
Enviar comentarios
Historial
Guardadas
Comunidad
Gatti (CONGRATS TO PASS YOUR TEST)
July 17th, 2019
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Without 1 star**
https:/*/ux9.de/Cv4d
Anonymous
July 17th, 2019
Which is the default SRST Certificate Provider port?
A. 5060
B. 2445
C. 16236
D. 2000
Answer: B
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b02srst.pdf
Imagine you configured several zones for device registration on Cisco VCS.
To which top zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
Pier-Luc Labarre
July 22nd, 2019
Hi!!!
The new PassLeader 300-075 dumps (July/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 466
A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device profile. However, the user logs into a Cisco 8941, which device profile will be used?
A. 8941 default device profile
B. 8851 default device profile
C. the 8851 device profile
D. universal device profile
Answer: D
NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect
Answer: D
NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed
Answer: C
NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch
Answer: A
NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?
A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone
Answer: A
NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)
Answer: D
NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?
A. 0
B. 30
C. 120
D. 60
Answer: C
NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.
Answer: C
NEW QUESTION 482
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
Pier-Luc Labarre
July 22nd, 2019
More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
July 22nd, 2019
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block trsanslation pattern.
D. Create a block learned pattern.
Answer: C
Free Get Dumps
July 22nd, 2019
Just Passed my Test!
I am now moving on to Next Exam
Share latest exam Questions enjoy
Without 2 star**
https:/*/u.t*o/Cv_TFQ
Anonymous
July 22nd, 2019
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Asssqistant Features
D. Feature Safe
Answer: A
ggbg
July 22nd, 2019
Taking the exam tomorrow. Will share inside.
Leonard
July 22nd, 2019
@ggbg
Best of luck bro!
kerca
July 22nd, 2019
@ggbg
We’ll be waiting your comments.
Anonymous
July 22nd, 2019
itlibraries
ggbg
July 23rd, 2019
Hi guys. Passed the exam with 946 today. 476q dump is solid (BUT I’ve researched most of the questions and found some mistakes). But there are still maybe 10-15/60 new questions.
Most of the new (or slightly changed) questions are for Expressway. I had a really bad headache and can recall just a couple of the questions exactly. If you work with UC systems on a daily basis you should be fine.
Here are the questions I remember:
1. There was a picture snipped from CUCM with 3 configured SAF Forwarders. The question was that SAF1 is configured to be primary, what happens if it fails?
– I am pretty sure that the answer is SAF2 becomes active and when SAF1 is up again it becomes third option.
2. There was a question for the steps required to configure MRA with Expressway-C and E. Similar to the dumps but not 100% match.
3. Also for Expressway C and E how is the search done with b2b calls?
– If the request comes from a known domain EXP-C sends it to CUCM.; -If the reuqeust is from another domain send it on the traversal zone to EXP-E.
4. There were created route patterns in CUCM 1365 with urgent priority and 1365X without urgent priority. What happens if 1365 is dialed and what do you see in the CM log?
– Call is routed immediately and – ForegoMatchExists in the logs – it was multi-choice.
5. Where do you configure Directory URI Alias Partition?
– Enterprise parameters
6. There was an exhibit whit one way audio on a traversal call with NAT.
Not sure of the answer, but for sure I know that signaling encryption does not support NAT traversal.
Take another look in CUCM (not the dumps) in the service parameters for DSCP.
SRST and Mobility questions were pretty much the same as the dumps.
Hope this helps guys
Chris
July 23rd, 2019
@ggbg Congratulations! Any chance you can tell us what questions from the 476q are incorrect? I know 152 and 175 are. Thank you in advance.
Chris
July 23rd, 2019
@ggbg Perhaps a better question might be is which incorrect answers on the 476q showed up in your exam? I unfortunately have never worked with Expressway so I’m not sure how concerned I should be about all the new questions if all I have is the 476q
Leonard
July 23rd, 2019
@ggbg
Congrats bro! Can u share the 476q dumps please?
Leonard
July 23rd, 2019
@ggbg and Chris
Kindly share 476q dumps
Leonard
July 23rd, 2019
@ggbg and Chris
Kindly share 476q dumps…Thanks
ericmart1977 at gmail dot com
kerca
July 23rd, 2019
Hi
Anyone is planing to take the exam 300-075 in the next days or weeks?
The next week i will buy the new passleader 300-075 updated with 483q, then i will share it here just to know if is still valid or do i need study more.
I don’t asking for your money, just pay me with your comment about it because i can’t fail this exam, i’m still studying the deployment guides, INE videos, etc.
Thanks
ggbg
July 24th, 2019
@Chris
I can’t really tell you which questions are wrong, I haven’t right them down. But for sure you can find two 100% same questions and possible answers where the answers marked as correct are different. Also, can’t tell you if any of those questions was in the exam.
@Leonard
Sent you the file.
@kerca
If I have some time I can look at what you have bought to verify how valid it is.
And one more question I remembered:
There was a snippet from CUCM SIP trunk with two Destination Addresses configured. The question was how is CUCM routing the calls over the two addresses?
– Randomly*
– Round-robin
– Always the first one until it is unreachable, then the second
– Both and whoever responds firs is taking the call
I have worked on this last year and I am 99.9% sure it is randomly. You can verify with some doc.
CV68
July 24th, 2019
i am taking 300-075 in 2 weeks, could I get a copy of the 476Q? cisco.voice68 at yahoo dot com. It would be very much appreciated.
faramir
July 24th, 2019
Hi ggbg,
could i get a copy of the dump ? I would be appreciated.. Thanks is advance
randekh8 at gmail dot com
Fateh
July 24th, 2019
congrats GGbg ,
did you purchased the dum 467 from prepaway ? or there is another source?
please advise
ggbg
July 25th, 2019
Yes, I bought the dumps from prepaway.
menxu
July 25th, 2019
Hello GGbg,
Can you share the dumps? menxu365 at gmail dot com
Thanks in advance
Stu
July 27th, 2019
Please share the dump GGbg, studixboy at yahoo dot com, thanks.
Anonymous
July 27th, 2019
Passed today, easy exam can’t complain. the questions posted here are good.
Studied questions posted here and itlibraries dumps
Fateh
July 27th, 2019
congrats Bro,
is the dump 476 still valid, any new questions appeared in the exam?
kindly ur advises.
Anonymous
July 28th, 2019
Can share de dumps?
Allan Harder
July 29th, 2019
Anyone share PassLeader new 300-075 dumps?
Venkata Sombhatta
July 29th, 2019
ATTENTION!!!
The new PassLeader 300-075 dumps (July/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect
Answer: D
NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed
Answer: C
NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch
Answer: A
NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?
A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone
Answer: A
NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)
Answer: D
NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?
A. 0
B. 30
C. 120
D. 60
Answer: C
NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.
Answer: C
NEW QUESTION 482
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
Venkata Sombhatta
July 29th, 2019
More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(346q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Maurizio Ferrara
July 30th, 2019
Hello!
The new PassLeader 300-070 dumps (July/2019 Updated~~~346q New Version) now are available, here are part of 300-070 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 321
In VCS, for H.323 calls, which setting must be enabled in the search rules for calls to work?
A. Set up search rule source to All Zones.
B. A search rule with a Mode of Any alias and a Target of the directory Expressway.
C. Search rules must be configured with a Source of Any.
D. Search rules configured without a Source of Any.
Answer: C
NEW QUESTION 322
An engineer is configuring a route pattern on Cisco Unified Communications Manager. Which string results in an error message?
A. 123
B. 123?
C. 123@
D. 123$
Answer: D
NEW QUESTION 323
Which tool is used in Cisco Unified Communications Manager to trace the path of a call logically?
A. Dialed Number Analyzer
B. Real Time Monitoring Tool
C. Log Partition Monitoring tool
D. Diagnostic Test tool
Answer: B
NEW QUESTION 324
A company is using an endpoint IX5200 dual-row, 18-seat system. Which conference device must be used?
A. IOS gateways
B. Cisco Unified Communications Manager
C. Cisco TelePresence server
D. MCU
Answer: B
NEW QUESTION 325
An engineer is defining a new Cisco Unified Communications Manager group. Which two features are provided in the Cisco Unified CM group? (Choose two.)
A. registration with different clusters in the same network
B. system IP address
C. prioritized list of up to two Cisco Unified CM servers
D. Cisco Unified CM redundancy
E. call load balancing
Answer: DE
NEW QUESTION 326
Through which two configurations, in Cisco Unified Communications Manager, are inbound and outbound calls routed, respectively?
A. inbound CSS and device pools
B. route lists and outgoing CSS
C. inbound CSS and route groups
D. route patterns and outgoing CSS
Answer: D
NEW QUESTION 327
How many full duplex timeslots does a T1 line contain?
A. 30
B. 24
C. 23
D. 31
Answer: B
NEW QUESTION 328
Which IOS command do you use for PRI when you enable QSIG signaling to connect ISDN to a PBX?
A. isdn switch-type basic-ni
B. isdn incoming-voice voice
C. isdn switch-type basic-qsig
D. isdn switch-type primary-qsig
Answer: D
NEW QUESTION 329
Which tool would be useful for analyzing changes or additions to an existing dial plan?
A. DRS
B. car
C. QRT
D. dna
Answer: D
NEW QUESTION 330
What is the correct procedure for implementing call coverage?
A. configure directory numbers, partitions, hunt pilot, hunt list, line groups
B. configure partitions, line groups, hunt lists, hunt pilot, directory numbers
C. configure partitions, directory numbers, line groups, hunt lists, hunt pilot
D. configure partitions, directory numbers, hunt pilot, hunt list, line groups
Answer: C
NEW QUESTION 331
Which of these best describes the function of transformations?
A. allow the call-routing component to modify the calling or called number
B. identify and define the tags and operatives used in route filters
C. configure and revise discard digits
D. redirect calls
Answer: A
NEW QUESTION 332
Which three can be assigned a partition? (Choose three.)
A. directory number
B. IP phone
C. gateway
D. route pattern
E. translation pattern
F. gatekeeper
Answer: ADE
NEW QUESTION 333
Which two can be targets of a route pattern? (Choose two.)
A. gateway
B. gatekeeper
C. route group
D. route list
E. translation pattern
F. CTI Port
Answer: AD
NEW QUESTION 334
If a SIP phone has neither KPML nor a set of dial rules configured, how are digits sent to Cisco Unified Communications Manager for further processing?
A. the user must press the # key
B. the user must press the Dial softkey
C. the user must press the enbloc softkey
D. when the user finishes dialing, the digits will be sent automatically
Answer: B
NEW QUESTION 335
Which two gateway configuration statements are required in order to enable Cisco Unified Communications Manager to control a T1 PRI in an MGCP gateway? (Choose two.)
A. mgcp
B. ccm-manager config
C. pri-group configuration on the controller
D. mgcp call-agent pointing to tftp server
E. isdn 13-backhaul ccm-manager on the serial interface
F. ccm-manager config server {TFTP ip_address}
Answer: BF
NEW QUESTION 336
Which wildcard character in a route pattern can be used to match to one or more digits in the range 0 through 9?
A. +
B. X
C. !
D. ?
Answer: C
NEW QUESTION 337
Which feature allows users to use the same set of patterns to route calls out of their local gateways?
A. standard local route group
B. route list
C. SIP trunking
D. intercluster trunk
Answer: A
NEW QUESTION 338
Which two phone states must contain the mobility softkey for the Cisco Mobile Connect feature? (Choose two.)
A. on hook
B. on hold
C. off hook
D. ring in
E. connected
Answer: AE
NEW QUESTION 339
You want to set up a Cisco TelePresence Server 8710 cluster. Which statement is true?
A. All blades in a cluster must be running the same version of software.
B. Up to four blades can be clustered in version 2.2.
C. The administrator can mix the type of blades in the cluster.
D. The support key can be installed in a single blade during the implementation.
Answer: B
NEW QUESTION 340
In which scenario can a software conference bridge from Cisco Unified Communications Manager be used for an audio conference?
A. when all participants use the G.711 codec
B. when there are only three participants
C. when all participants use both the G.711 and G.729 codecs
D. when only SCCP phones are used
Answer: A
NEW QUESTION 341
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a phone? (Choose two.)
A. on a softkey configuration
B. on the phone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone
Answer: CE
NEW QUESTION 342
……
P.S.
PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(346q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
Maurizio Ferrara
July 30th, 2019
What’s More:
1. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
July 30th, 2019
NEW QUESTION 327
How many full duplex timeslots does a T1 line contain?
A. 30
B. 24
C. 23
D. 31
Answer: B
NEW QUESTION 328
Which IOS command do you use for PRI when you enable QSIG signaling to connect ISDN to a PBX?
A. isdn switch-type basic-ni
B. isdn incoming-voice voice
C. isdn switch-type basic-qsig
D. isdn switch-type primary-qsig
Answer: D
NEW QUESTION 329
Which tool would be useful for analyzing changes or additions to an existing dial plan?
A. DRS
B. car
C. QRT
D. dna
Answer: D
NEW QUESTION 330
What is the correct procedure for implementing call coverage?
A. configure directory numbers, partitions, hunt pilot, hunt list, line groups
B. configure partitions, line groups, hunt lists, hunt pilot, directory numbers
C. configure partitions, directory numbers, line groups, hunt lists, hunt pilot
D. configure partitions, directory numbers, hunt pilot, hunt list, line groups
Answer: C
NEW QUESTION 331
Which of these best describes the function of transformations?
A. allow the call-routing component to modify the calling or called number
B. identify and define the tags and operatives used in route filters
C. configure and revise discard digits
D. redirect calls
Answer: A
NEW QUESTION 332
Which three can be assigned a partition? (Choose three.)
A. directory number
B. IP phone
C. gateway
D. route pattern
E. translation pattern
F. gatekeeper
Answer: ADE
NEW QUESTION 333
Which two can be targets of a route pattern? (Choose two.)
A. gateway
B. gatekeeper
C. route group
D. route list
E. translation pattern
F. CTI Port
Answer: AD
NEW QUESTION 334
If a SIP phone has neither KPML nor a set of dial rules configured, how are digits sent to Cisco Unified Communications Manager for further processing?
A. the user must press the # key
B. the user must press the Dial softkey
C. the user must press the enbloc softkey
D. when the user finishes dialing, the digits will be sent automatically
Answer: B
NEW QUESTION 335
Which two gateway configuration statements are required in order to enable Cisco Unified Communications Manager to control a T1 PRI in an MGCP gateway? (Choose two.)
A. mgcp
B. ccm-manager config
C. pri-group configuration on the controller
D. mgcp call-agent pointing to tftp server
E. isdn 13-backhaul ccm-manager on the serial interface
F. ccm-manager config server {TFTP ip_address}
Answer: BF
NEW QUESTION 336
Which wildcard character in a route pattern can be used to match to one or more digits in the range 0 through 9?
A. +
B. X
C. !
D. ?
Answer: C
NEW QUESTION 337
Which feature allows users to use the same set of patterns to route calls out of their local gateways?
A. standard local route group
B. route list
C. SIP trunking
D. intercluster trunk
Answer: A
NEW QUESTION 338
Which two phone states must contain the mobility softkey for the Cisco Mobile Connect feature? (Choose two.)
A. on hook
B. on hold
C. off hook
D. ring in
E. connected
Answer: AE
NEW QUESTION 339
You want to set up a Cisco TelePresence Server 8710 cluster. Which statement is true?
A. All blades in a cluster must be running the same version of software.
B. Up to four blades can be clustered in version 2.2.
C. The administrator can mix the type of blades in the cluster.
D. The support key can be installed in a single blade during the implementation.
Answer: B
NEW QUESTION 340
In which scenario can a software conference bridge from Cisco Unified Communications Manager be used for an audio conference?
A. when all participants use the G.711 codec
B. when there are only three participants
C. when all participants use both the G.711 and G.729 codecs
D. when only SCCP phones are used
Answer: A
NEW QUESTION 341
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a phone? (Choose two.)
A. on a softkey configuration
B. on the qsphone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone
Answer: CE
Good Luck All
July 30th, 2019
Just Passed my Test!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Without 2 star**
https:/*/u.t*o/Cv_TFQ
Anonymous
July 30th, 2019
NEW QUESTION 336
Which wildcard character in a route pattern can be used to match to one or more digits in the range 0 through 9?
A. +
B. X
C. !
D. ?
Answer: C
NEW QUESTION 337
Which feature allows users to use the same set of patterns to route calls out of their local gateways?
A. standard local route group
B. route list
C. SIP tqerunking
D. intercluster trunk
Answer: A
Kenjie
July 30th, 2019
@ggbg and/or @Leonard
Can you share the 476q dumps please? Thank you so much!
ken DOT baluyut AT gmail DOT com
Gabixuxo
August 1st, 2019
Hello All,
Please send me Latest dumps for 300-075. Got an exam in 5 days
gabixuxo at nextmail dot in
David Chung
August 5th, 2019
ATTENTION!!!
The new PassLeader 300-075 dumps (Aug/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect
Answer: D
NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed
Answer: C
NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch
Answer: A
NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?
A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone
Answer: A
NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)
Answer: D
NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?
A. 0
B. 30
C. 120
D. 60
Answer: C
NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.
Answer: C
NEW QUESTION 482
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
David Chung
August 5th, 2019
More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(346q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
August 6th, 2019
Passed IT-Libraries dumps are still good
Faramir
August 6th, 2019
@Ananymous Congrats.. How good it would if you upload the dump here..)
Anonymous
August 6th, 2019
Hi everyone,
Somebody to send Me #CISCO self Study CIPTV-2# book.
My email {email not allowed}.
Anonymous
August 6th, 2019
Somebody to send Me #CISCO self Study CIPTV-2# book.
polyxro () otenet.gr
Fateh
August 6th, 2019
Which dumps are the IT libraries?
Anonymous
August 7th, 2019
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can regisdster endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuraticson > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a blosqck translation pattern.
D. Create a block learned pattern.
Answer: C
Good Luck All
August 7th, 2019
I have done my test with 985/1000 congrats me!
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
Without 1 star**
https:/*/ej.uz/dan7
Anonymous
August 7th, 2019
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE///////////////
TONY
August 7th, 2019
Hello @ggbg @Leonard @kerca
Good day. I’m planning to take 300-075 exam in the next few weeks. If you could also share with me a copy of your 476Q or kerca’s 483Q file, that would be very helpful. Thank you.
my email address is: anthony DOT soleno AT yahoo DOT com
Kind regards
Mike
August 7th, 2019
Hello everybody,
When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully?
A. dial peers that address all sites in the multisite cluster
B. translation patterns that apply to the local PSTN for each gateway
C. incoming and outgoing COR lists
D. configuration of the gateway as an MGCP gateway
Correct answer:B
WHY???We can configure translation pattern only on CUCM, but it doesnt matter when link down and srst is working!!
GC21
August 7th, 2019
@Mike
Yes you are right…translation pattern makes no sense when WAN is down as local gateway function as stand-alone with PSTN routing the calls. So what do u think is the best choice here?
For me, i think the best answer is D but fallback should have been added.
Note:
MGCP gateway fallback is a feature that improves the availability of remote MGCP
gateways.
Mike
August 7th, 2019
@GC21
I think A is correct. WE can configure SIP gateway or H.323 gateway with SRST(MGCP not nessary), but we cant make calls to other sites without dial peers
GC21
August 8th, 2019
@Mike
If you will analyze choice A – dial-peers that address all sites in the multisite cluster is wrong. It should be dial-peer on that site only because it is in SRST mode and other dial peers in other cluster are unreachable due to WAN link failure…well thats my point of view only.
Chris
August 8th, 2019
Consider this question as a follow up to support Mike’s answer of A:
While operating in SRST, what is needed to route calls outside of the remote site location to the PSTN?
A. SIP trunk
B. CallManager route patterns
C. translation patterns
D. POTS dial peers
E. VOIP dial peers
Correct Answer: D
Mike
August 8th, 2019
I think, there is a mistake.
Correct answer is B, but it must be “translation profile”
A- isnt correct i think now. We cant make dial that adresses ALL SITES ….
We can make only pots dial peer.
Fateh
August 13th, 2019
Guys, I am not able to open ETE. files , did Vumingo still free to use?
any other ideas to open ete files?
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
So many robots here. I will take the exam next week and update also.
But if their are any people took the exam the latest.
Please help us.
Anonymoz, I will say the 459Q that I’ve seen passed around here that is from 2018 will only get you so far. If you just use that, you will NOT pass. It has many old questions that are no longer on the exam, as well as missing a bunch of new questions.
Good luck.
I Pass June 20th , 860 , wityh PL 459 Q
appears like 15 new questions in this link shorturl.at/EFJO9
Brett if you was taking exam recently can you tell us what they are asking about now? some tips and tricks, what we should focus on while preparing? If you don’t want to share questions with us, then just share your thoughts. Definetly it will help some of us!
Thanks in advance.
NEW QUESTION 106
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef
Answer: B
NEW QUESTION 107
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)
A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.
Answer: CE
NEW QUESTION 116
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.
Answer: A
NEW QUESTION 117
Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RASenabled
endpoint that originates from an external zone?
A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS
Answer: C
QUESTION 124
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)
A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.
Answer: BE
NEW QUESTION 128
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: AC
Answer: AC
NEW QUESTION 131
Which two options should be used to create a secure traversal zone between the Expressway-C and
Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Answer: AC
NEW QUESTION 134
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence
endpoints?
A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)
Answer: D
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 154
Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered oefn both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints
registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zeone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: AC
Passed Successfully Thank You i download your file and today i passed the exam
.
Thank You again god bless you
Just Remove 2 Stars** get file
https:/*/eze*e.link/Q4ip0SG4xT
EW QUESTION 154
Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-fwof-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
@WeNT
My exam focused heavily on VCS/Expressway. Make sure you know that stuff well. As for the 459Q being passed around on here, it is older (I’ve seen 2018). I saw maybe 15% of those questions on the exam I had. The only reason I passed that exam is because I have real world experience. If you are trying to pass based only off that outdated dump being passed around here, it would be very difficult to do so…not impossible, but improbable IMO.
new questions
1. A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device profile.
However, the user logs into a Cisco 8941, which device profile will be used?
8941 default device profile
8851 default device profile
the 8851 device profile
universal device profile ***
2. Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
Mobility Profile
Answer Too Soon timer
Remote Destination Profile
Enable Mobile Connect***
3. Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
unique phone service for each Cisco Unified Communications Manager server
automatically handled by Cisco Unified Communications Manager
server load balancer virtual IP *****
DNS A record with multiple IPs listed
4. In Cisco Unified Communications Manager region configuration, you have “Maximum Audio Bit Rate” set to 256 kbps between region A and region B.
Which description is true?
If the total bandwidth for all calls between region A and B goes beyond 256 kbps, Cisco Unified
Communications Manager starts to drop calls.
A single call between region A and B uses bandwidth of exactly 256 kbps.
The total bandwidth for all calls between region A and B uses up to 256 kbps.
A single call between region A and B uses bandwidth of up to 256 kbps.*****
5. Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
access layer switch ****
branch router
Cisco IP phone
core layer switch
6. Where does an engineer configure Cisco Unified Communications Manager Directory URI?
directory number*****
Cisco IPC
CSF – Jabber
physical phone
7. QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
AF41 (34)
EF (46)
CS4 (32)
CS3 (24)*****
aqui vienen todas
shorturl.at/alFLP
share
The best preparation for the Cisco exam, I passed the cisco exam with the help of it.
http:/**/c7.gg/fCXw8
18. Which two types of call causes the user to hear the reorder tone? (Choose two.) (was on the exam)
a) restricted call ———->correct
b) call using a non-Cisco phone
c) call to a number that is working but is unlisted
d) unrestricted call
e) call to number that has been blocked ———->correct
19. An engineer is investigating voice quality degradationon calls passing through a particular SIP gateway. To father the necesarry information, simple traffic captures are taken. (was on the exam)
Which information in the capture reveals the problem?
a) version
b) destination port
c) ToS bits——->correct (not sure)
d) MTU
20. In a network with two Cisco Unified Communications Manager clusters, Phone 1 on Cluster A dials {email not allowed} to reach Phone 2 on Cluster B, and the call fails.
What are two possible causes for this problem? (Choose two) (was on the exam)
a) The calling search space on Phone 1 contains the partitions with a pattern that matches {email not allowed}
b) Cisco UDS is not enabled on Cluster B —->correct (not sure)
c) Cisco UDS is not enabled on Cluster A
d) Cluster A does not have a SIP trunk to reach Cluster B—->correct (not sure)
e) Cluster B does not have a SIP trunk to reach Cluster A
21. Company XYZ just completed an upgrade of the Cisco Unified Communications Manager from version 9.X to version 10.5 Users report that they cannot log in to Extension Mobility after the upgrade.
This error message is displayed ” login is unavailable (23)” Which action can resolve the issue? (was on the exam)
a) Re-enable extension mobility for the affected users
b) Cisco Unified Communications Manager 10.5 does not include Extension Mobility
c) Enable the remote cluster option for the affected users
d) Enable the home cluster option for the affected users —->correct
7. 1. Refer to the exhibit inbound calls via a SIP trunk to the Cisco IP phones that are registered on Cisco Unified Communications Manager are failing.
Based on the Cisco CallManager service trace, which action should you take to fix the issue? (was on the exam)
a) Add xyz.com in the Organization Top level Domain field on Cisco Unified Communications Manager
b) Set the incoming Transport Type to TLS on the SIP trunk security profile that is assigned to the SIP trunk
c) Check whether the calling search space for incoming calls on the Sip Trunk has access to the partition of the Cisco IP phone that is being called
d) Add vcs.abc.org in the Organization Top Level Domain Field on Cisco Unified Communications Manager
When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration? (was on the exam)
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.
Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information?(was on the exam)
A. location controller
B. route pattern
C. route string
D. URI
SIP 15 min timeout question: SESSION REFRESH
Based on the ACK SDP output, what can be concluded? (was on the exam)
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
xd This event is a multipoint video call with three participants.
A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. (was on the exam /2 questions/)
Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911.
At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work.
Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group
a. The device pool contains more call processing agents in the CMO group than the endpoint can support (was on the exam)
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support ——>correct
d. MRGL contains more media groups than the endpoint can support
Q27 Refer to the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder. (was on the exam)
What is the root cause of the issue?
a. The client SAF label is incorrectly configured
b. The SAF port is incorrectly configured
c. The SAF password is incorrectly configured ———>correct (not sure)
d. The packets are being corrupted on the network
e. The packets are being dropped on the network
48. Refer to the exhibit. In this CUCM dial-plan, a localized translation pattern 9.1[2-0]XX[2-0]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. (was on the exam)
The translation pattern is used to globalize the Users dialed digits followed by matching a \+1 Route Pattern as seen in the exhibit.
Users with DeviceLines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678300 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
a. Route Pattern does not have “Urgent Priority” checked—–>correct
b. Translation Pattern does not have “Urgent Priority” checked —–>correct
c. Translation Pattern has “Provide Outside Dial Tone” checked
d. Route Pattern does not have “Allow Overlap Sending” checked
e. Route Pattern Call Classification set to OffNet
Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)
A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct
SAF not registering check the config, (was on the exam)
username/password etc,
The extension mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?: (was on the exam)
User profile
Device Profile
And others
1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot the problem?(choose two) (was on the exam)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk
8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)
1.Which debug command analyzes messages that are produced by SIP during the call setup process in IOS? (was on the exam)
A:Debug ccsip messages
one dbreplication question: what does the reply of the status command mean? My answer: a synch problem in the one of the tables;
how do you prevent echo and choppy audio: my answer—->QoS and Echo Canceller;
a really long question about translation rules and how do you preserve a dialing habits in SRST mode. They want to configure a translation profile under CCM falback mode. Please bear in mind here the directions are reverted not like in dial peers;
G711, G729, G723 bandwidth question. How much the CUCM will substract (two questions);
Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
x Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was not activated.
d An H.323 SAF trunk was configured instead of a SIP SAF trunk
e CCD advertising service was not activated.
How do you block external transfers on the CUCM? Ans: enable ‘block offnet to offnet transfer feature’
An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one.
Which statement can cause of this issue? (was on the exam)
X a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone whwrere Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit.
The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”.
Which configuration requirement supports Cisco EMCC and avoids this error condition?
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam.
Share latest examm Questions enjoy
Without 1 ***
https:/*/ezee.link/Q4ip0SG4xT
How do you block external transfers on the CUCM? Ans: enable ‘block offnet to offnet transfer feature’
An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one.
Which statement can cause of this issue? (was on the exam)
X a. No valid release key is idnstalled on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
@Brett
and any brothers can advice me for the best dump can shared to pass the exam 300-075 it will highly appreciated
I have read the materials 4 times with old version of INE Please I need to pass before the expiration and to fined a job
my email kindly: eng.fadi80 at gmail dot com
Thanks for help
Congratulations!!!
Passed 300-075 exam on 27/June/2019 with 9xx.
PassLeader 459q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing!
Thanks a lot!
+1
+1
+1
+1
p.s.
Taking the 300-075 exam ASAP, the exam will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
P.S.
1. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(459q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Hi @Anonymous for you help in 300 070, now I go for 300 075, I have a dump but I think is old with 246 questions so could you share me some dump please? or some else?
koenmay at outlook dot com
Regards
Hello forum,
I am certifying and I want to recover some money, I send the exams for 20 Dolares each one by Paypal.
300-070 – Implementing Cisco IP Telephony & Video, Part 1 v1.0
305 Q&As
300-075 – Implementing Cisco IP Telephony & Video, Part 2 v1.0
459 Q&As
300-085 – Implementing Cisco Collaboration Application v1.0
246 Q&As
I also have some books in PDF.
Send an email
ing.spineda at gmail.com
Good luck to everyone!
18. Which two types of call causes the user to hear the reorder tone? (Choose two.) (was on the exam)
a) restricted call ———->correct
b) call using a non-Cisco phone
c) call to a number that is working but is unlisted
d) unrestricted call
e) call to number that has been blocked ———->correct
19. An engineer is investigating voice quality degradationon calls passing through a particular SIP gateway. To father the necesarry information, simple traffic captures are taken. (was on the exam)
Which information in the capture reveals the problem?
a) version
b) destination port
c) ToS bits——->correct (not sure)
d) MTU
20. In a network with two Cisco Unified Communications Manager clusters, Phone 1 on Cluster A dials {email not allowed} to reach Phone 2 on Cluster B, and the call fails.
What are two possible causes for this problem? (Choose two) (was on the exam)
a) The calling search space on Phone 1 contains the partitions with a pattern that matches {email not allowed}
b) Cisco UDS is not enabled on Cluster B —->correct (not sure)
c) Cisco UDS is not enabled on Cluster A
d) Cluster A does not have a SIP trunk to reach Cluster B—->correct (not sure)
e) Cluster B does not have a SIP trunk to reach Cluster A
21. Company XYZ just completed an upgrade of the Cisco Unified Communications Manager from version 9.X to version 10.5 Users report that they cannot log in to Extension Mobility after the upgrade.
This error message is displayed ” login is unavailable (23)” Which action can resolve the issue? (was on the exam)
a) Re-enable extension mobility for the affected users
b) Cisco Unified Communications Manager 10.5 does not include Extension Mobility
c) Enable the remote cluster option for the affected users
d) Enable the home cluster option for the affected users —->correct
7. 1. Refer to the exhibit inbound calls via a SIP trunk to the Cisco IP phones that are registered on Cisco Unified Communications Manager are failing.
Based on the Cisco CallManager service trace, which action should you take to fix the issue? (was on the exam)
a) Add xyz.com in the Organization Top level Domain field on Cisco Unified Communications Manager
b) Set the incoming Transport Type to TLS on the SIP trunk security profile that is assigned to the SIP trunk
c) Check whether the calling search space for incoming calls on the Sip Trunk has access to the partition of the Cisco IP phone that is being called
d) Add vcs.abc.org in the Organization Top Level Domain Field on Cisco Unified Communications Manager
When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration? (was on the exam)
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.
Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information?(was on the exam)
A. location controller
B. route pattern
C. route string
D. URI
SIP 15 min timeout question: SESSION REFRESH
Based on the ACK SDP output, what can be concluded? (was on the exam)
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
xd This event is a multipoint video call with three participants.
A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. (was on the exam /2 questions/)
Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911.
At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work.
Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group
a. The device pool contains more call processing agents in the CMO group than the endpoint can support (was on the exam)
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support ——>correct
d. MRGL contains more media groups than the endpoint can support
Q27 Refer to the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder. (was on the exam)
What is the root cause of the issue?
a. The client SAF label is incorrectly configured
b. The SAF port is incorrectly configured
c. The SAF password is incorrectly configured ———>correct (not sure)
d. The packets are being corrupted on the network
e. The packets are being dropped on the network
48. Refer to the exhibit. In this CUCM dial-plan, a localized translation pattern 9.1[2-0]XX[2-0]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. (was on the exam)
The translation pattern is used to globalize the Users dialed digits followed by matching a \+1 Route Pattern as seen in the exhibit.
Users with DeviceLines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678300 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
a. Route Pattern does not have “Urgent Priority” checked—–>correct
b. Translation Pattern does not have “Urgent Priority” checked —–>correct
c. Translation Pattern has “Provide Outside Dial Tone” checked
d. Route Pattern does not have “Allow Overlap Sending” checked
e. Route Pattern Call Classification set to OffNet
Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)
A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct
SAF not registering check the config, (was on the exam)
username/password etc,
The extension mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?: (was on the exam)
User profile
Device Profile
And others
1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot the problem?(choose two) (was on the exam)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk
8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)
1.Which debug command analyzes messages that are produced by SIP during the call setup process in IOS? (was on the exam)
A:Debug ccsip messages
one dbreplication question: what does the reply of the status command mean? My answer: a synch problem in the one of the tables;
how do you prevent echo and choppy audio: my answer—->QoS and Echo Canceller;
a really long question about translation rules and how do you preserve a dialing habits in SRST mode. They want to configure a translation profile under CCM falback mode. Please bear in mind here the directions are reverted not like in dial peers;
G711, G729, G723 bandwidth question. How much the CUCM will substract (two questions);
Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
x Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was wqdnot activated.
d An H.323 SAF trunk was configured instead of a SIP SAF trunk
e CCD advertising service was not activated.
https:/*/hide*uri.*co*m/xdMM8X
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Without stars ***
https:/*/hide*uri.*co*m/xdMM8X
Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)
A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires2 Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct
SAF not registering check the config, (was on the exam)
username/password etc,e
Check this one out Q476
h*tt*ps*:*//w*e.*tl/t*-RpzQi*f7*TXQ
–> Remove stars
–> Let me know how it turns out
The questions posted by “Anonymous” (July 3rd) did not appear on the exam 300-075 but the q’s posted by “Pass” (25th of June) did. Some of the answers are wrong I think.
Hi Kong, what about the one posted by DumpsGuy on July 5?
Congratulations!!!
Passed 300-075 exam on 3/July/2019 with 9xx.
PassLeader 459q dumps are still valid for passing – few new questions, but not difficult!
Special thanks guys for sharing!
Thanks a lot!
+1
+1
+1
+1
p.s.
Taking the 300-075 exam ASAP, the exam will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
P.S.
1. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(459q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
More:
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
And,
4. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
@kong, @Chris
and any brothers can advice me for the best dump can shared to pass the exam 300-075 it will highly appreciated
I have read the materials 4 times with old version of INE Please I need to pass before the expiration and to fined a job
my email kindly: eng.fadi80 at gmail dot com
Thanks for help
NEW QUESTION 104
Which type of endpoints support the DSCP for Video Calls parameter in Cisco Unified CM?
A. only Cisco Telepresence endpoints
B. any video capable device
C. only Jabber
D. only Cisco UC video endpoints
Answer: B
NEW QUESTION 106
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef
Answer: B
NEW QUESTION 107
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)
A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.
Answer: CE
NEW QUESTION 116
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.
Answer: A
NEW QUESTION 117
Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RASenabled
endpoint that originates from an external zone?
A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS
Answer: C
QUESTION 124
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)
A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.
Answer: BE
NEW QUESTION 128
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)
A. allowing numeric dialing from Cisco phones to Expressway
B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list
Answer: AC
Answer: AC
NEW QUESTION 131
Which two options should be used to create a secure traversal zone between the Expressway-C and
Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to authenticate the neighboring peer.
Answer: AC
NEW QUESTION 134
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence
endpoints?
A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)
AnswerDA: D
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 139
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications Manager?
A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
Answer: C
NEW QUESTION 154
Which option is Aa benefit of implementing CFUR?
A. CFUR is desigDned to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints
registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS CondQfiguration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: AC
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Erase 2 Star***
https:/*/hec.s*u/jZr6
NEW QUESTION 172
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Aadpplication Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: AD
The new PassLeader 300-075 dumps (July/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 466
A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device profile. However, the user logs into a Cisco 8941, which device profile will be used?
A. 8941 default device profile
B. 8851 default device profile
C. the 8851 device profile
D. universal device profile
Answer: D
NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect
Answer: D
NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed
Answer: C
NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch
Answer: A
NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?
A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone
Answer: A
NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)
Answer: D
NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?
A. 0
B. 30
C. 120
D. 60
Answer: C
NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.
Answer: C
NEW QUESTION 482
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
BTW:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Hello there Today pass the exam with 912
https:/**/*hideuri.c*o*m*/*qJJOdJ
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI appslications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Erase 2 Star**
http:/*/shorten*me.pamhardy.net/7166dd1
You are a network administrator tasked with configuring the device security for a single device. What is the result of you configurig the new device security mode in the phone configuration window of Cisco Unified Communications Manager?
A a rebuild of device configuration.exe file
B an automatic reboot of the entire duster
C an automatic connection to the security mode database
D rebuild of the device configuration.xml file
?
An engineer must generate a report of Cisco Unified Communications Manager usage for cadpacitqsy planning. Where can this information be obtained within System reports?
A precedence call
B voice usage
C user usage
D traffic
?
@ DumpsGuy
the file is already removed in this link:
h*tt*ps*:*//w*e.*tl/t*-RpzQi*f7*TXQ
Can u share it again? Thanks…
Hello forum,
I just passed the CIPTV2 exam, I was very good 91X.
I used the 459Q guide and 14 are new. I corrected the guide and added the reference lnk. If someone wants it, I am selling it for 10 Dollars to recover some money.
Contact me at ing.spineda a t g m a i l d o t c o m
I also want to help you pass.
In another forum I read a couple of key questions that helped me pass and I want to share them with you plus a couple more that I remember coming out.
I do this because the forum helped me several times and I want to pay for it.
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load virtual balancer IP
D. DNS A record with multiple IPs listed
Answer: C
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/cmapps.html#37411
Which is the default SRST Certificate Provider port?
A. 5060
B. 2445
C. 16236
D. 2000
Answer: B
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b02srst.pdf
Imagine you configured several zones for device registration on Cisco VCS.
To which top zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
An engineer opens up to TAC case and wants to implement CCD / SAF service.
Which menu navigation sequence must an engineer navigate to when configuring a hosted DN pattern?
A. Call Routing> Call Control Discovery> Hosted DN Pattern
B. Advanced Features> SAF> Hosted DN Pattern
C. Call Routing> SAF> Hosted DN Pattern
D. Advanced Features> Call Control Discovery> Hosted DN Pattern
Answer: A
Validated in CUCM.
What is the maximum allowed round-trip between Cisco Unified Communication Manager nodes?
A. 150 ms
B. 40 ms
C. 500 ms
D. 80 ms
Answer: D
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/models.html#wp1044021
Which field must be populated to assign to default directory URI partition in Communication Manager?
A. Directory URI Alias Partition
B. Alias URI Directory Partition
C. Alias URI Partition
D. Directory URI Partition
Answer: A
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_cucm-system-guide-90/CUCM_BK_CD2F83FA_00_system-guide_chapter_0101111.pdf
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Feature Safe
B. Size Safe
C. Call Display Restriction Features
D. CUCM Assistant Features
Answer: B
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsgd-861-cm/fsem.html
For which two reasons should you mark AF41 as the audio and video channels of a video call?
A. to allow high-definition quality calls over low-speed links
B. to give video calls to higher priority than AF41 in the QoS policy
C. to provide separate classes for audio-only calls and video calls
D. to prioritize video over other high-priority traffic classes
E. to preserve lip synchronization between the audio and video channels
Answer: DE
Most likely
365. An engineer must ensure that Expressway-E listens and only its legitimate sender of such traffic is Expressway-C. Which port must be opened to accomplish this task?
A. 2000
B. 2111
C. 2222
D. 2333
Answer: C
Validated
cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Cisco-Expressway-IP-Port-Usage-for-Firewall-Traversal-Deployment- Guide-X8-9-2.pdf
How many hosted DN patterns per cluster does Cisco Unified Communications Manager allow you to configure?
A. 5000
B. 10000
C. 1500
D. 2000
E. 2500
Answer: B
Validated
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100. html
What is the default value for the Drop Ad Hoc Conference service parameter?
A. Never
B. When No On-Net Parties Remain in the Conference
C. When No Off-Net Parties Remain in the Conference
D. Drop Ad Hoc Conference When Creator Leaves
Answer: A
Validated in CUCM
353. Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?
TO.
policy-map policy1
class class1
set ip dscp 5
class class2
set ip dscp C S3
B.
policy-map policy1
class class1
set ip dscp ef
class class2
set ip dscp 5
C.
policy-map policy1
class class1
set ip dscp 5
class class2
set ip dscp ef
D.
policy-map policy1
class class1
set ip dscp 3
class class2
set ip dscp ef
Answer: B
Ambiguous if it goes first EF or 5
Enviar comentarios
Historial
Guardadas
Comunidad
I made it today with 9xx/1000, everything here is valid!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Without 1 star**
https:/*/ux9.de/Cv4d
Which is the default SRST Certificate Provider port?
A. 5060
B. 2445
C. 16236
D. 2000
Answer: B
Validated!
cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b02srst.pdf
Imagine you configured several zones for device registration on Cisco VCS.
To which top zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
Hi!!!
The new PassLeader 300-075 dumps (July/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 466
A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device profile. However, the user logs into a Cisco 8941, which device profile will be used?
A. 8941 default device profile
B. 8851 default device profile
C. the 8851 device profile
D. universal device profile
Answer: D
NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect
Answer: D
NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed
Answer: C
NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch
Answer: A
NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?
A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone
Answer: A
NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)
Answer: D
NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?
A. 0
B. 30
C. 120
D. 60
Answer: C
NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.
Answer: C
NEW QUESTION 482
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(303q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block trsanslation pattern.
D. Create a block learned pattern.
Answer: C
Just Passed my Test!
I am now moving on to Next Exam
Share latest exam Questions enjoy
Without 2 star**
https:/*/u.t*o/Cv_TFQ
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Asssqistant Features
D. Feature Safe
Answer: A
Taking the exam tomorrow. Will share inside.
@ggbg
Best of luck bro!
@ggbg
We’ll be waiting your comments.
itlibraries
Hi guys. Passed the exam with 946 today. 476q dump is solid (BUT I’ve researched most of the questions and found some mistakes). But there are still maybe 10-15/60 new questions.
Most of the new (or slightly changed) questions are for Expressway. I had a really bad headache and can recall just a couple of the questions exactly. If you work with UC systems on a daily basis you should be fine.
Here are the questions I remember:
1. There was a picture snipped from CUCM with 3 configured SAF Forwarders. The question was that SAF1 is configured to be primary, what happens if it fails?
– I am pretty sure that the answer is SAF2 becomes active and when SAF1 is up again it becomes third option.
2. There was a question for the steps required to configure MRA with Expressway-C and E. Similar to the dumps but not 100% match.
3. Also for Expressway C and E how is the search done with b2b calls?
– If the request comes from a known domain EXP-C sends it to CUCM.; -If the reuqeust is from another domain send it on the traversal zone to EXP-E.
4. There were created route patterns in CUCM 1365 with urgent priority and 1365X without urgent priority. What happens if 1365 is dialed and what do you see in the CM log?
– Call is routed immediately and – ForegoMatchExists in the logs – it was multi-choice.
5. Where do you configure Directory URI Alias Partition?
– Enterprise parameters
6. There was an exhibit whit one way audio on a traversal call with NAT.
Not sure of the answer, but for sure I know that signaling encryption does not support NAT traversal.
Take another look in CUCM (not the dumps) in the service parameters for DSCP.
SRST and Mobility questions were pretty much the same as the dumps.
Hope this helps guys
@ggbg Congratulations! Any chance you can tell us what questions from the 476q are incorrect? I know 152 and 175 are. Thank you in advance.
@ggbg Perhaps a better question might be is which incorrect answers on the 476q showed up in your exam? I unfortunately have never worked with Expressway so I’m not sure how concerned I should be about all the new questions if all I have is the 476q
@ggbg
Congrats bro! Can u share the 476q dumps please?
@ggbg and Chris
Kindly share 476q dumps
@ggbg and Chris
Kindly share 476q dumps…Thanks
ericmart1977 at gmail dot com
Hi
Anyone is planing to take the exam 300-075 in the next days or weeks?
The next week i will buy the new passleader 300-075 updated with 483q, then i will share it here just to know if is still valid or do i need study more.
I don’t asking for your money, just pay me with your comment about it because i can’t fail this exam, i’m still studying the deployment guides, INE videos, etc.
Thanks
@Chris
I can’t really tell you which questions are wrong, I haven’t right them down. But for sure you can find two 100% same questions and possible answers where the answers marked as correct are different. Also, can’t tell you if any of those questions was in the exam.
@Leonard
Sent you the file.
@kerca
If I have some time I can look at what you have bought to verify how valid it is.
And one more question I remembered:
There was a snippet from CUCM SIP trunk with two Destination Addresses configured. The question was how is CUCM routing the calls over the two addresses?
– Randomly*
– Round-robin
– Always the first one until it is unreachable, then the second
– Both and whoever responds firs is taking the call
I have worked on this last year and I am 99.9% sure it is randomly. You can verify with some doc.
i am taking 300-075 in 2 weeks, could I get a copy of the 476Q? cisco.voice68 at yahoo dot com. It would be very much appreciated.
Hi ggbg,
could i get a copy of the dump ? I would be appreciated.. Thanks is advance
randekh8 at gmail dot com
congrats GGbg ,
did you purchased the dum 467 from prepaway ? or there is another source?
please advise
Yes, I bought the dumps from prepaway.
Hello GGbg,
Can you share the dumps? menxu365 at gmail dot com
Thanks in advance
Please share the dump GGbg, studixboy at yahoo dot com, thanks.
Passed today, easy exam can’t complain. the questions posted here are good.
Studied questions posted here and itlibraries dumps
congrats Bro,
is the dump 476 still valid, any new questions appeared in the exam?
kindly ur advises.
Can share de dumps?
Anyone share PassLeader new 300-075 dumps?
ATTENTION!!!
The new PassLeader 300-075 dumps (July/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect
Answer: D
NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed
Answer: C
NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch
Answer: A
NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?
A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone
Answer: A
NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)
Answer: D
NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?
A. 0
B. 30
C. 120
D. 60
Answer: C
NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.
Answer: C
NEW QUESTION 482
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(346q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Hello!
The new PassLeader 300-070 dumps (July/2019 Updated~~~346q New Version) now are available, here are part of 300-070 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 321
In VCS, for H.323 calls, which setting must be enabled in the search rules for calls to work?
A. Set up search rule source to All Zones.
B. A search rule with a Mode of Any alias and a Target of the directory Expressway.
C. Search rules must be configured with a Source of Any.
D. Search rules configured without a Source of Any.
Answer: C
NEW QUESTION 322
An engineer is configuring a route pattern on Cisco Unified Communications Manager. Which string results in an error message?
A. 123
B. 123?
C. 123@
D. 123$
Answer: D
NEW QUESTION 323
Which tool is used in Cisco Unified Communications Manager to trace the path of a call logically?
A. Dialed Number Analyzer
B. Real Time Monitoring Tool
C. Log Partition Monitoring tool
D. Diagnostic Test tool
Answer: B
NEW QUESTION 324
A company is using an endpoint IX5200 dual-row, 18-seat system. Which conference device must be used?
A. IOS gateways
B. Cisco Unified Communications Manager
C. Cisco TelePresence server
D. MCU
Answer: B
NEW QUESTION 325
An engineer is defining a new Cisco Unified Communications Manager group. Which two features are provided in the Cisco Unified CM group? (Choose two.)
A. registration with different clusters in the same network
B. system IP address
C. prioritized list of up to two Cisco Unified CM servers
D. Cisco Unified CM redundancy
E. call load balancing
Answer: DE
NEW QUESTION 326
Through which two configurations, in Cisco Unified Communications Manager, are inbound and outbound calls routed, respectively?
A. inbound CSS and device pools
B. route lists and outgoing CSS
C. inbound CSS and route groups
D. route patterns and outgoing CSS
Answer: D
NEW QUESTION 327
How many full duplex timeslots does a T1 line contain?
A. 30
B. 24
C. 23
D. 31
Answer: B
NEW QUESTION 328
Which IOS command do you use for PRI when you enable QSIG signaling to connect ISDN to a PBX?
A. isdn switch-type basic-ni
B. isdn incoming-voice voice
C. isdn switch-type basic-qsig
D. isdn switch-type primary-qsig
Answer: D
NEW QUESTION 329
Which tool would be useful for analyzing changes or additions to an existing dial plan?
A. DRS
B. car
C. QRT
D. dna
Answer: D
NEW QUESTION 330
What is the correct procedure for implementing call coverage?
A. configure directory numbers, partitions, hunt pilot, hunt list, line groups
B. configure partitions, line groups, hunt lists, hunt pilot, directory numbers
C. configure partitions, directory numbers, line groups, hunt lists, hunt pilot
D. configure partitions, directory numbers, hunt pilot, hunt list, line groups
Answer: C
NEW QUESTION 331
Which of these best describes the function of transformations?
A. allow the call-routing component to modify the calling or called number
B. identify and define the tags and operatives used in route filters
C. configure and revise discard digits
D. redirect calls
Answer: A
NEW QUESTION 332
Which three can be assigned a partition? (Choose three.)
A. directory number
B. IP phone
C. gateway
D. route pattern
E. translation pattern
F. gatekeeper
Answer: ADE
NEW QUESTION 333
Which two can be targets of a route pattern? (Choose two.)
A. gateway
B. gatekeeper
C. route group
D. route list
E. translation pattern
F. CTI Port
Answer: AD
NEW QUESTION 334
If a SIP phone has neither KPML nor a set of dial rules configured, how are digits sent to Cisco Unified Communications Manager for further processing?
A. the user must press the # key
B. the user must press the Dial softkey
C. the user must press the enbloc softkey
D. when the user finishes dialing, the digits will be sent automatically
Answer: B
NEW QUESTION 335
Which two gateway configuration statements are required in order to enable Cisco Unified Communications Manager to control a T1 PRI in an MGCP gateway? (Choose two.)
A. mgcp
B. ccm-manager config
C. pri-group configuration on the controller
D. mgcp call-agent pointing to tftp server
E. isdn 13-backhaul ccm-manager on the serial interface
F. ccm-manager config server {TFTP ip_address}
Answer: BF
NEW QUESTION 336
Which wildcard character in a route pattern can be used to match to one or more digits in the range 0 through 9?
A. +
B. X
C. !
D. ?
Answer: C
NEW QUESTION 337
Which feature allows users to use the same set of patterns to route calls out of their local gateways?
A. standard local route group
B. route list
C. SIP trunking
D. intercluster trunk
Answer: A
NEW QUESTION 338
Which two phone states must contain the mobility softkey for the Cisco Mobile Connect feature? (Choose two.)
A. on hook
B. on hold
C. off hook
D. ring in
E. connected
Answer: AE
NEW QUESTION 339
You want to set up a Cisco TelePresence Server 8710 cluster. Which statement is true?
A. All blades in a cluster must be running the same version of software.
B. Up to four blades can be clustered in version 2.2.
C. The administrator can mix the type of blades in the cluster.
D. The support key can be installed in a single blade during the implementation.
Answer: B
NEW QUESTION 340
In which scenario can a software conference bridge from Cisco Unified Communications Manager be used for an audio conference?
A. when all participants use the G.711 codec
B. when there are only three participants
C. when all participants use both the G.711 and G.729 codecs
D. when only SCCP phones are used
Answer: A
NEW QUESTION 341
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a phone? (Choose two.)
A. on a softkey configuration
B. on the phone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone
Answer: CE
NEW QUESTION 342
……
P.S.
PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(346q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
What’s More:
1. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 327
How many full duplex timeslots does a T1 line contain?
A. 30
B. 24
C. 23
D. 31
Answer: B
NEW QUESTION 328
Which IOS command do you use for PRI when you enable QSIG signaling to connect ISDN to a PBX?
A. isdn switch-type basic-ni
B. isdn incoming-voice voice
C. isdn switch-type basic-qsig
D. isdn switch-type primary-qsig
Answer: D
NEW QUESTION 329
Which tool would be useful for analyzing changes or additions to an existing dial plan?
A. DRS
B. car
C. QRT
D. dna
Answer: D
NEW QUESTION 330
What is the correct procedure for implementing call coverage?
A. configure directory numbers, partitions, hunt pilot, hunt list, line groups
B. configure partitions, line groups, hunt lists, hunt pilot, directory numbers
C. configure partitions, directory numbers, line groups, hunt lists, hunt pilot
D. configure partitions, directory numbers, hunt pilot, hunt list, line groups
Answer: C
NEW QUESTION 331
Which of these best describes the function of transformations?
A. allow the call-routing component to modify the calling or called number
B. identify and define the tags and operatives used in route filters
C. configure and revise discard digits
D. redirect calls
Answer: A
NEW QUESTION 332
Which three can be assigned a partition? (Choose three.)
A. directory number
B. IP phone
C. gateway
D. route pattern
E. translation pattern
F. gatekeeper
Answer: ADE
NEW QUESTION 333
Which two can be targets of a route pattern? (Choose two.)
A. gateway
B. gatekeeper
C. route group
D. route list
E. translation pattern
F. CTI Port
Answer: AD
NEW QUESTION 334
If a SIP phone has neither KPML nor a set of dial rules configured, how are digits sent to Cisco Unified Communications Manager for further processing?
A. the user must press the # key
B. the user must press the Dial softkey
C. the user must press the enbloc softkey
D. when the user finishes dialing, the digits will be sent automatically
Answer: B
NEW QUESTION 335
Which two gateway configuration statements are required in order to enable Cisco Unified Communications Manager to control a T1 PRI in an MGCP gateway? (Choose two.)
A. mgcp
B. ccm-manager config
C. pri-group configuration on the controller
D. mgcp call-agent pointing to tftp server
E. isdn 13-backhaul ccm-manager on the serial interface
F. ccm-manager config server {TFTP ip_address}
Answer: BF
NEW QUESTION 336
Which wildcard character in a route pattern can be used to match to one or more digits in the range 0 through 9?
A. +
B. X
C. !
D. ?
Answer: C
NEW QUESTION 337
Which feature allows users to use the same set of patterns to route calls out of their local gateways?
A. standard local route group
B. route list
C. SIP trunking
D. intercluster trunk
Answer: A
NEW QUESTION 338
Which two phone states must contain the mobility softkey for the Cisco Mobile Connect feature? (Choose two.)
A. on hook
B. on hold
C. off hook
D. ring in
E. connected
Answer: AE
NEW QUESTION 339
You want to set up a Cisco TelePresence Server 8710 cluster. Which statement is true?
A. All blades in a cluster must be running the same version of software.
B. Up to four blades can be clustered in version 2.2.
C. The administrator can mix the type of blades in the cluster.
D. The support key can be installed in a single blade during the implementation.
Answer: B
NEW QUESTION 340
In which scenario can a software conference bridge from Cisco Unified Communications Manager be used for an audio conference?
A. when all participants use the G.711 codec
B. when there are only three participants
C. when all participants use both the G.711 and G.729 codecs
D. when only SCCP phones are used
Answer: A
NEW QUESTION 341
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a phone? (Choose two.)
A. on a softkey configuration
B. on the qsphone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone
Answer: CE
Just Passed my Test!
I am now moving on to Next Exam
Share latest examm Questions enjoy
Without 2 star**
https:/*/u.t*o/Cv_TFQ
NEW QUESTION 336
Which wildcard character in a route pattern can be used to match to one or more digits in the range 0 through 9?
A. +
B. X
C. !
D. ?
Answer: C
NEW QUESTION 337
Which feature allows users to use the same set of patterns to route calls out of their local gateways?
A. standard local route group
B. route list
C. SIP tqerunking
D. intercluster trunk
Answer: A
@ggbg and/or @Leonard
Can you share the 476q dumps please? Thank you so much!
ken DOT baluyut AT gmail DOT com
Hello All,
Please send me Latest dumps for 300-075. Got an exam in 5 days
gabixuxo at nextmail dot in
ATTENTION!!!
The new PassLeader 300-075 dumps (Aug/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?
A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect
Answer: D
NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?
A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed
Answer: C
NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?
A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch
Answer: A
NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?
A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone
Answer: A
NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?
A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)
Answer: D
NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?
A. 0
B. 30
C. 120
D. 60
Answer: C
NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?
A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone
Answer: D
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.
Answer: C
NEW QUESTION 482
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(346q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(333q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Passed IT-Libraries dumps are still good
@Ananymous Congrats.. How good it would if you upload the dump here..)
Hi everyone,
Somebody to send Me #CISCO self Study CIPTV-2# book.
My email {email not allowed}.
Somebody to send Me #CISCO self Study CIPTV-2# book.
polyxro () otenet.gr
Which dumps are the IT libraries?
NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)
A. You can regisdster endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.
Answer: BE
NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?
A. Configuration > Domains
B. Configuraticson > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones
Answer: D
NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?
A. CS4
B. CS2
C. AF41
D. EF
Answer: A
NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?
A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe
Answer: A
NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)
A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration
Answer: BE
NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?
A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate
Answer: D
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE
NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?
A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a blosqck translation pattern.
D. Create a block learned pattern.
Answer: C
I have done my test with 985/1000 congrats me!
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
Without 1 star**
https:/*/ej.uz/dan7
NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)
A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks
Answer: CE///////////////
Hello @ggbg @Leonard @kerca
Good day. I’m planning to take 300-075 exam in the next few weeks. If you could also share with me a copy of your 476Q or kerca’s 483Q file, that would be very helpful. Thank you.
my email address is: anthony DOT soleno AT yahoo DOT com
Kind regards
Hello everybody,
When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully?
A. dial peers that address all sites in the multisite cluster
B. translation patterns that apply to the local PSTN for each gateway
C. incoming and outgoing COR lists
D. configuration of the gateway as an MGCP gateway
Correct answer:B
WHY???We can configure translation pattern only on CUCM, but it doesnt matter when link down and srst is working!!
@Mike
Yes you are right…translation pattern makes no sense when WAN is down as local gateway function as stand-alone with PSTN routing the calls. So what do u think is the best choice here?
For me, i think the best answer is D but fallback should have been added.
Note:
MGCP gateway fallback is a feature that improves the availability of remote MGCP
gateways.
@GC21
I think A is correct. WE can configure SIP gateway or H.323 gateway with SRST(MGCP not nessary), but we cant make calls to other sites without dial peers
@Mike
If you will analyze choice A – dial-peers that address all sites in the multisite cluster is wrong. It should be dial-peer on that site only because it is in SRST mode and other dial peers in other cluster are unreachable due to WAN link failure…well thats my point of view only.
Consider this question as a follow up to support Mike’s answer of A:
While operating in SRST, what is needed to route calls outside of the remote site location to the PSTN?
A. SIP trunk
B. CallManager route patterns
C. translation patterns
D. POTS dial peers
E. VOIP dial peers
Correct Answer: D
I think, there is a mistake.
Correct answer is B, but it must be “translation profile”
A- isnt correct i think now. We cant make dial that adresses ALL SITES ….
We can make only pots dial peer.
Guys, I am not able to open ETE. files , did Vumingo still free to use?
any other ideas to open ete files?
hi, which dump would you recommend?