Home > Share your CIPT2 v8.0 Experience

Share your CIPT2 v8.0 Experience

June 27th, 2011 in CIPT2 v8.0 642-457 Go to comments
Comments (100) Comments
Comment pages
1 … 33 34 35 36 37 405
  1. GC21
    August 15th, 2019

    In Cisco Unified Communications Manager, where do you configure the default bit rate for audio and video devices?
    A. Enterprise Parameters
    B. Region under Region Information
    C. Cisco CallManager service under Service Parameter Configuration
    D. Enterprise Phone Configuration

    B or C?
    Passleader says C but i think it should be B. Your input please.

  2. Epilef Czar
    August 16th, 2019

    The new PassLeader 300-080 dumps (Aug/2019 Updated) now are available, here are part of 300-080 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 348
    Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?

    A. 4
    B. 0
    C. 2
    D. 3

    Answer: B

    NEW QUESTION 349
    Which CLI command monitors ILS replication progress?

    A. utils ils findxnode
    B. utils ils show peer info
    C. utils ils showpeerinfo
    D. utils ils lookup

    Answer: C

    NEW QUESTION 351
    What is the most typical issue that causes a call setup to fail within a single site?

    A. A translation pattern is configured as urgent.
    B. Caller ID is missing or incorrect.
    C. Incorrect CoS settings such as CSSs and route partitions.
    D. Destination is a shared line.

    Answer: C

    NEW QUESTION 352
    Which problem would never cause a multisite intracluster call to fail?

    A. A codec mismatch between the two endpoints.
    B. CoS settings on the endpoints.
    C. Incorrect digit manipulation.
    D. Lack of required media resource.
    E. A codec match between the two endpoints.

    Answer: E

    NEW QUESTION 353
    Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)

    A. Blocked patterns at the advertising cluster.
    B. Blocked numbers at the advertising cluster.
    C. Blocked URIs at the advertising cluster.
    D. Blocked patterns at the receiving cluster.
    E. GDPR is not enabled.
    F. Cluster is configured with a wrong password.

    Answer: EF

    NEW QUESTION 354
    Which configuration element is not used to implement Unified Mobility?

    A. Softkey templates
    B. User accounts
    C. Access lists
    D. Remote destination profiles
    E. Remote destinations
    F. Enterprise parameters

    Answer: F

    NEW QUESTION 355
    The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

    A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
    B. The office phone device is not enabled for Mobile Connect.
    C. The softkey template with the Mobility button is not attached to the office phone device.
    D. The Mobile Connect service has not been activated.

    Answer: C

    NEW QUESTION 356
    An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

    A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
    B. The QoS configuration on the routers is inadequate.
    C. The WAN link between the sites is experiencing excessive packet loss.
    D. The TCP timeout is set too low on one of the network devices.

    Answer: A

    NEW QUESTION 359
    An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

    A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
    B. There is a missing MTP source for the SCCP IP phone.
    C. The phone number is in the incorrect partition.
    D. There are insufficient DSP resources on the PSTN gateways.

    Answer: D

    NEW QUESTION 360
    Which two of the following items are the gateway supplementary services? (Choose two.)

    A. Hold
    B. DTMF relay
    C. Transfer
    D. Transcoding

    Answer: AC

    NEW QUESTION 361
    As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

    A. Gateway
    B. Gatekeeper
    C. MCU
    D. Call agent

    Answer: B

    NEW QUESTION 362
    Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

    A. RTMT trace output.
    B. Cisco IOS debug commands.
    C. Dialed Number Analyzer output.
    D. Cisco Unified Communications Manager alerts.
    E. Cisco IOS show commands.

    Answer: BE

    NEW QUESTION 363
    A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

    A. voiceGWay(config)# show dialplan number 1000
    B. voiceGWay(config)# show all voip dialpeer
    C. voiceGWay(config)# show sip 1000 voip dialpeer
    D. voiceGWay(config)# show version

    Answer: A

    NEW QUESTION 364
    Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

    A. xcommand ForceConfigUpdate master
    B. xcommand ForceConfiguration
    C. xcommand ConfigUpdate
    D. xcommand ForceConfigUpdate

    Answer: A

    NEW QUESTION 365
    Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

    A. show voice dsp group all
    B. show voip rtp connections
    C. show dspfarm dsp active
    D. show call active voice brief

    Answer: BC

    NEW QUESTION 366
    ……

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369Q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy that link and open it in your web browser!!!)]

  3. Epilef Czar
    August 16th, 2019

    BTW:

    1. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (256q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (346q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (483q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  4. Anonymous
    August 17th, 2019

    NEW QUESTION 363
    A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

    A. voiceGWay(config)# show dialplan number 1000
    B. voiceGWay(config)# show all voip dialpeer
    C. voiceGWay(config)# show sip 1000 voip dialpeer
    D. voiceGWay(config)# show version

    Answer: A

    What do you consider are the proper answers for the following questions:

    An administrator chooses Service > Control Center in the DNA tool. Which service should be enabled?

    A. dialed number analyzer server
    B. database syncadhronization
    C. directory number alias sync
    D. directory number alias lookup

  5. Passed Successfully
    August 17th, 2019

    Just Passed.

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    Without 1 star**
    https:/*/zkrt.cz/F0i

  6. Anonymous
    August 17th, 2019

    NEW QUESTION 356
    An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

    A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
    B. The QoS configuratidwon on the routers is inadequate.
    C. The WAN link between the sites is experiencing excessive packet loss.
    D. The TCP timeout is set too low on one of the network devices.

    Answer: A

  7. Chris
    August 17th, 2019

    Hi Everyone, just got back from the exam and thankfully I passed so thanks to @ggbg from a couple pages ago, his extra questions were spot on. If I can think of any new questions, I’ll post here for the rest of the weekend.

    One of the new ones was asking to list two things that SRST does like provides phone service during a WAN failure, etc. One of them asked to configure an MRA.

    To all those studying, I used the 476q and of the 60 questions on the exam, around a dozen or so were ones I’ve never seen. Keep in mind the 476q has quite a few wrong answers so do your research. Also, several of the questions on the exam look like the ones from 476q, but worded differently or change from single answer to multiple choice, combining a couple questions into one.

    My feeling is if you know the 476q inside and out with all the corrected answers, you should be able to guess your way to a passing score on the other questions. I got a 919 and I thought I had failed about 2/3 way into the test. I had no drag and drops and no diagrams with multi-part questions.

    Good luck everyone!

  8. GC21
    August 18th, 2019

    @Chris

    Congrats Bro…can u share 476Q…i only have the 459 from PL…i plan to take the exam after 2 weeks.

    krislice7678 at gmail dot com

    thanks in advance!

  9. GC21
    August 18th, 2019

    In Cisco Unified Communications Manager, where do you configure the default bit rate for audio and video devices?
    A. Enterprise Parameters
    B. Region under Region Information
    C. Cisco CallManager service under Service Parameter Configuration
    D. Enterprise Phone Configuration

    B or C?
    Passleader says C but i think it should be B. Your input please.

  10. PS78
    August 18th, 2019

    For those who have presented the exam (300-075) recently:

    1. Does anybody has seen any question related to MLPS?…
    2. Does anybody has seen a question asking about a scenario with SAF1, SAF2 & SAF3?

    Thnx in advance,

  11. Ben Wallis
    August 19th, 2019

    @Epilef Czar August 16th, 2019

    Hi!

    Thanks for your new questions.

    Would you like to share the full version PassLeader 300-070/300-075/300-080/300-085 dumps?

    ~~~PassLeader 300-070/300-075/300-080/300-085 dumps~~~

    I want to complete my CCNP Collaboration exams at the end of year 2019.

    Thanks in advance!!!

  12. Chris
    August 19th, 2019

    Here is the 476q (obviously remove the stars): h*ttp*s://w*e.tl/t-*UU*cTjta*rf*d

    @GC21: In Cisco Unified Communications Manager, where do you configure the default bit rate for audio and video devices?

    The region is where you configure codecs between sites, but you configure the default codecs under Service Parameters. You can double check that if you log into CUCM as I did to confirm that answer. I too originally thought it was the region.

    @PS78, the SAF1-3 question was shown by ggbg a couple pages ago, check out their posts. Not sure about what MPLS question you’re referring to outside of the dump.

    I’ll check this forum one more time tomorrow before I sign off for good. Best of luck to everyone!

  13. GC21
    August 19th, 2019

    @Chris

    Thanks a lot Bro for sharing…Best of luck in your next exam.

  14. Gerald Ridge
    August 21st, 2019

    BTW:

    1. PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (483q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (256q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  15. Anonymous
    August 22nd, 2019

    NEW QUESTION 331
    Which of these best describes the function of transformations?

    A. allow the call-routing component to modify the calling or called number
    B. identify and define the tags and operatives used in route filters
    C. configure and revise discard digits
    D. redirect calls

    Answer: A

    NEW QUESTION 332
    Which three can be assigned a partition? (Choose three.)

    A. directory number
    B. IP phone
    C. gatewwqeay
    D. route pattern
    E. translation pattern
    F. gatekeeper

    Answer: ADE

    NEW QUESTION 333
    Which two can be targets of a route pattern? (Choose two.)

    A. gateway
    B. gatekeeper
    C. route group
    D. route list
    E. translation pattern
    F. CTI Port

    Answer: AD

    NEW QUESTION 334
    If a SIP phone has neither KPML nor a set of dial rules configured, how are digits sent to Cisco Unified Communications Manager for further processing?

    A. the user must press the # key
    B. the user must preeqwss the Dial softkey
    C. the user must press the enbloc softkey
    D. when the user finishes dialing, the digits will be sent automatically

    Answer: B

  16. congrats to pass.’
    August 22nd, 2019

    Congratulations Passed!

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    Without 1 star**
    https:/*/zkrt.cz/F0i

  17. Anonymous
    August 22nd, 2019

    NEW QUESTION 360
    Which option describes destinations that can be routed?

    A. DNs located in the partitions inside its calling search space.
    B. DNs not listed odawn the restricted dialing list of the device.
    C. DNs on the allowed list in the ACL of the registered Cisco Unified Communications Manager server.
    D. DNs on the trusted list of the CA within the Cisco Unified Communications Manager cluster.

    Answer: A

    NEW QUESTION 361
    What is the maximum number of supported participants for a MeetMe conference?

    A. 32
    B. 64
    C. 96
    D. 128

    Answer: D

  18. SusyQ
    August 22nd, 2019

    Hi all,
    I just failed with 827 using the 483q from PL… (I’m pretty sure some questions are incorrect)

    anyone has any idea of a dump that I can trust in?

    I took a look at the prepaway dump but it’s the same old questions.

    I won’t bother you to share your dumps with me… I just want to buy a dump 100% real.

  19. kerca
    August 22nd, 2019

    @SusyQ

    Did you see new any questions or you think that just the answers from 483q from PL are wrong.

    Did you study something else or just the dumps?

    Regards.

  20. SusyQ
    August 22nd, 2019

    @kerca

    I saw around 10 different questions about Expressway and ILS.

    I found the “new questions” that some of you guys have posted here but I’m not sure if those answers are correct cause I used them and I failed.

    PL was my only reference in terms of dumps, but I’m still looking for a dump 100% real…

  21. KL
    August 23rd, 2019

    @ SusyQ

    If you can post the 483Q PL here we will discuss the doubtful questions and correct it. PL is a reliable dump in my own experience.

  22. Dersy
    August 23rd, 2019

    What is the minimum passing score?

  23. Kaleb
    August 24th, 2019

    QUESTION
    An engineer wants to allow more calls on the WAN link from the head office to a branch. The region setting has been changed from G711 to G729.
    Which other configuration in Cisco Unified Communications Manager must be updated to accomplish this goal?
    A. region
    B. physical location
    C. class of control
    D. location
    E. AAR group

    Experts… what’s your answer for the question above?

  24. SusyQ
    August 24th, 2019

    @KL
    What do you think about for the following question:

    Which configuration can you add to Mobile Connect to explicitly allow or block calls to remote destinations based on the caller ID of the caller?
    A. external call control
    B. access list
    C. route filter
    D. call anchoring

  25. KL
    August 24th, 2019

    @ SusyQ

    B. access list

  26. Dersy
    August 24th, 2019

    @SusyQ
    What was the minimum passing score?

  27. KupacKupsPaccHTecT
    August 24th, 2019

    Has anybody tried the new Q496 PrepAway version yet ?

  28. Kerca
    August 24th, 2019

    Hi all, i just take my exam a few hours ago and passed with 886/860 score, i used the PL 483q, there are some questions with wrongs answers because ir that i made a research of every question.

    At the moment to take the exam PL was very helpfull but isnt enough, i saw maybe 5 new questions that isnt on PL but are like @chris mentioned before

    I remenber a new one, said something like how many concurrent traces can you schedule at the same time in RTMT.

    Answers
    3
    4
    5
    6

    I think selected 4 but im not sure if it was the correct answer

    Good look

  29. KL
    August 24th, 2019

    Congratulations Kerca! Can u share 483Q to us please?

  30. SusyQ
    August 25th, 2019

    @Kerca
    Yeah, I remember that question… I thought it was 6…

    did you see a question about MPLS, something about a hub-and-spoke topology?..

    Any particular question that you remember that is wrong from PL 483q?

    @860

  31. KL
    August 25th, 2019

    @SusyQ

    The answer should be 6. RTMT offers 6 concurrent traces as per document in Cisco.

    (You can use the Schedule Collection option of the trace and log central feature to schedule recurring up to six concurrent trace collections)

    Can u share the 483Q in krislice7678 at gmail dot com? I will try to confirm the questions with correct answers…

  32. SusyQ
    August 25th, 2019

    @KL sent.

    Yeah… I was sure it was 6, that question is not in PL though…

  33. Richard Wu
    August 26th, 2019

    Hi!

    The new PassLeader 300-075 dumps (Aug/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 468
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 469
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 470
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 471
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 472
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 473
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 474
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 475
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 476
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 477
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 479
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 480
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 481
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

    NEW QUESTION 482
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (483q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  34. Richard Wu
    August 26th, 2019

    More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (256q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  35. d
    August 26th, 2019

    NEW QUESTION 475
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 476
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 477
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 479
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

  36. Ebrahem’s Student
    August 26th, 2019

    Congratulations Passed.

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    Without 2 star**
    http:/*/tiny.l*t/rtmrxx4i

  37. Anonymous
    August 26th, 2019

    NEW QUESTION 481
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block tranaslation pattern.
    D. Create a block learned pattern.

    Answer: C

  38. Alberto Bayo
    September 2nd, 2019

    Hi!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 468
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 469
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 470
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 471
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 472
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 473
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 474
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 475
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 476
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 477
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 479
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 480
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 481
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

    NEW QUESTION 482
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (483q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  39. Alberto Bayo
    September 2nd, 2019

    More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (256q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  40. xortan
    September 2nd, 2019

    Could anyone please share the latest PL dump? The 483 Q one.
    My e-mail is natro*xortan*@gma*il.com

    Remove the stars please 🙂

  41. Anonymous
    September 5th, 2019

    NEW QUESTION 354
    Which configuration element is not used to implement Unified Mobility?

    A. Softkey templates
    B. User accounts
    C. Access lists
    D. Remote destination profiles
    E. Remote destinations
    F. Enterprise parameters

    Answer: F

    NEW QUESTION 355
    The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

    A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
    B. The office phone device is not enabled for Mobile Connect.
    C. The softkey template with the Mobility button is not attached to the office phone device.
    D. The Mobile Connect service has not been activated.

    Answer: C

    NEW QUESTION 356
    An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

    A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
    B. The QoS configuration on the routers is inadequate.
    C. The WAN link between the sites is experiencing excessive packet loss.
    D. The TCP timeout is set too low on one of the network devices.

    Answer: A

    NEW QUESTION 359
    An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

    A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
    B. There is a missing MTP source for the SCCP IP phone.
    C. The phone number is in the incorrect partition.
    D. There are insufficient DSP resources on the PSTN gateways.

    Answer: D

    NEW QUESTION 360
    Which two of the following items are the gateway supplementary services? (Choose two.)

    A. Hold
    B. DTMF relay
    C. Transfer
    D. Transcoding

    Answer: AC

    NEW QUESTION 361
    As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

    A. Gateway
    B. Gatekeeper
    C. MCU
    D. Call agent

    Answer: B

    NEW QUESTION 362
    Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

    A. RTMT trace output.
    B. Cisco IOS debug commands.
    C. Dialed Nuember Analyzer output.
    D. Cisco Unified Communications Manager alerts.
    E. Cisco IOS show commands.

    Answer: BE

    NEW QUESTION 363
    A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

    A. voiceGWay(config)# show dialplan number 1000
    B. voiceGWay(config)# show all voip dialpeer
    C. voiceGWay(config)# show sip 1000 voip dialpeer
    D. voiceGWay(config)# show version

    Answer: A

    NEW QUESTION 364
    Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

    A. xcommand ForceConfigUpdate master
    B. xcommand ForceConfiguration
    C. xcommand ConfigUpdate
    D. xcommand ForceConfigUpdate

    Answer: A

    NEW QUESTION 365
    Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

    A. show voice dsp group all
    B. show voip rtp connections
    C. show dspfarm dsp active
    D. show call active voice brief

    Answer: BC

  42. Anonymous
    September 5th, 2019

    Congratulations Passed!

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    Without 2 star**
    http:/*/tiny.l*t/rtmrxx4i

  43. Anonymous
    September 5th, 2019

    NEW QUESTION 364
    Which item is mandatory to enable the auto-registration tool?

    A. Cisco Unity
    B. Cisco DRS
    C. Cisco CRS
    D. Cisco CME

    Answer: C??????????????????

  44. matutina de garbanzos
    September 6th, 2019

    Hi @SusyQ and @KL

    I’m planning to take 300-075 exam in the next 2 weeks. If you could also share with me a copy of your 483Q dumps, I’ll greatly appreciate it!

    my email address is: anthony.soleno at yahoo dot com

    Thank you!

  45. Bruce Hoang
    September 9th, 2019

    Hi!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 468
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 469
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 470
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 471
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 472
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 473
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 474
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 475
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 476
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 477
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 479
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 480
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 481
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

    NEW QUESTION 482
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (483q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  46. Bruce Hoang
    September 9th, 2019

    More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (256q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  47. Anonymous
    September 11th, 2019

    NEW QUESTION 354
    Which configuration element is not used to implement Unified Mobility?

    A. Softkey templates
    B. User accounts
    C. Access lists
    D. Remote destination profiles
    E. Remote destinations
    F. Enterprise parameters

    Answer: F

    NEW QUESTION 355
    The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

    A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
    B. The office phone device is not enabled for Mobile Connect.
    C. The softkey template with the Mobility button is not attached to the office phone device.
    D. The Mobile Connect service has not been activated.

    Answer: C

    NEW QUESTION 356
    An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

    A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
    B. The QoS configuration on the routers is inadequate.
    C. The WAN link between the sites is experiencing excessive packet loss.
    D. The TCP timeout is set too low on one of the network devices.

    Answer: A

    NEW QUESTION 359
    An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

    A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
    B. There is a missing MTP source for the SCCP IP phone.
    C. The phone number is in the incorrect partition.
    D. There are insufficient DSP resources on the PSTN gateways.

    Answer: D

    NEW QUESTION 360
    Which two of the following items are the gateway supplementary services? (Choose two.)

    A. Hold
    B. DTMF relay
    C. Transfer
    D. Transcoding

    Answer: AC

    NEW QUESTION 361
    As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

    A. Gateway
    B. Gatekeeper
    C. MCU
    D. Call agent

    Answer: B

    NEW QUESTION 362
    Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

    A. RTMT trace output.
    B. Cisco IOS debug commands.
    C. Dialed Nuember Analyzer output.
    D. Cisco Unified Communications Manager alerts.
    E. Cisco IOS show commands.

    Answer: BE

    NEW QUESTION 363
    A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

    A. voiceGWay(config)# show dialplan number 1000
    B. voiceGWay(config)# show all voip dialpeer
    C. voiceGWay(config)# show sip 1000 voip dialpeer
    D. voiceGWay(config)# show version

    Answer: A

    NEW QUESTION 364
    Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

    A. xcommand ForceConfigUpdate master
    B. xcommand ForceConfiguration
    C. xcommand ConfigUpdate
    D. xcommand ForceConfigUpdate

    Answer: A

    NEW QUESTION 365
    Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

    A. show voice dsp group all
    B. show voip rtp connections
    C. show dspfarm dsp active
    D. show call active voice brief

    Answer: BC

    AnonymousSeptember 5th, 2019
    Congratulations Passed!

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    Without 2 star**
    http:/*/tiny.l*t/rtmrxx4i

    AnonymousSeptember 5th, 2019
    NEW QUESTION 364
    Which item is mandatory to enable the auto-registration tool?

    A. Cisco Unity
    B. Cisco DRS
    C. Cisco CRS
    D. Cisco CME

    Answer: C??????????????????

    matutina de garbanzosSeptember 6th, 2019
    Hi @SusyQ and @KL

    I’m planning to take 300-075 exam in the next 2 weeks. If you could also share with me a copy of your 483Q dumps, I’ll greatly appreciate it!

    my email address is: anthony.soleno at yahoo dot com

    Thank you!

    Bruce HoangSeptember 9th, 2019
    Hi!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 468
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 469
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 470
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 471
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 472
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 473
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 474
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 475
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 476
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 477
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 479
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 480
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 481
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Cresqate a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

  48. Passed Successfully
    September 11th, 2019

    Congratulations Passed.

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    Without 2 star**
    http:/*/tiny.l*t/rtmrxx4i

  49. Anonymous
    September 11th, 2019

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unifiqed CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

  50. ciscohelp
    September 14th, 2019

    Hi Guys…need your help on below questions please…

    QUESTION
    Which two rules are applied to the Expressway-C when configuring business-to-business communications? (Choose two.)
    A. Send any SIP URI with the domain portion that matches any other domain to the DNS Zone that is used for DNS SRV resolution.
    B. Send any SIP URI with the domain portion that matches the domain of the local company to the Expressway-C cluster.
    C. Use a SIP Route Pattern set to “*”.
    D. Send any SIP URI with the domain portion that matches any other domain to Expressway-E.
    E. Send any SIP URI with the domain portion that matches the domain of the local company to Cisco Unified Communications Manager.

    QUESTION
    You must install an Expressway Edge server pair to enable mobile and remote access for a customer network.
    Which two requirements are used to install an MRA solution successfully? (Choose two.)
    A. Configure your firewalls to allow traffic from Expressway-Core to Expressway-Edge servers and to allow traffic from internet hosts to Expressway-Edge servers. You do not need to configure firewall rules for traffic from Expressway-Edge to Expressway Core servers.
    B. You can deploy Edge servers with multiple network interfaces or with a single network interface. In both scenarios, you must enable NAT for the Internet-facing interface if you are using private Ip addresses.
    C. Make sure that Expressway-Edge and Expressway-Core servers have their server certificates signed by the same certification authority and the CA certificate is uploaded to the trusted CA store otherwise the Traversal zone will not work.
    D. Configure DNS SRV records according. Make sure that you can resolve DNS SRV record_collabedge_ tls.yourdomain.com outside your company network. Make sure that you cannot resolve it inside your company network.

  51. Ronald Parrott
    September 16th, 2019

    Hello!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 468
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 469
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 470
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 471
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 472
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 473
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 474
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 475
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 476
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 477
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 479
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 480
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 481
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

    NEW QUESTION 482
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (483q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  52. Ronald Parrott
    September 16th, 2019

    More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (256q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  53. Youki Free File
    September 16th, 2019

    Congratulations Passed.

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    Without 1 star***
    http:/*/psce.pw/LQUU2

  54. Anonymous
    September 16th, 2019

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application qwServer Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

  55. kloo
    September 20th, 2019

    hello guys
    Today I have done my test

    Exam Very easy all questions in Dumps

    not difficult at all, do not worry!

    Without 1 star***
    https:*/**/**priv.sh/PWi4BF2

  56. Anonymous
    September 22nd, 2019

    kloo is fake fake fake….

    kloo is fake fake fake….

    kloo is fake fake fake…. /////////////////

  57. Adam Jasinski
    September 25th, 2019

    Hello!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 468
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 469
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 470
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 471
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 472
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 473
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 474
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 475
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 476
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 477
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 478
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 479
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 480
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 481
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

    NEW QUESTION 482
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (483q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  58. Adam Jasinski
    September 25th, 2019

    More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (386q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (283q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  59. Gerardo Madrid
    September 25th, 2019

    Hi!

    The new PassLeader 300-070 dumps (Updated Recently) now are available, here are part of 300-070 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 385
    How is the translated number recorded in the Call Detail Record when a dialed number is manipulated using a translation pattern?

    A. It does not display that a call was placed.
    B. It shows the translated number and not the originally dialed number.
    C. It shows the originally dialed number, not the translated one.
    D. It shows only that a call was placed, but not the dialed or translated number.

    Answer: B

    NEW QUESTION 386
    In Cisco Unified Communications Manager, for which type of trunk is URI dialing available?

    A. SIP
    B. H.323
    C. H.225
    D. QSIG

    Answer: A

    NEW QUESTION 387
    Through which two configuration elements are off-net calls routed in inbound and outbound direction respectively?

    A. Inbound CSS and route groups.
    B. Inbound CSS and device pools.
    C. Route lists and outgoing CSS.
    D. Route patterns and outgoing CSS.

    Answer: A

    NEW QUESTION 388
    An engineer is developing a new SRST configuration for a branch router using PRI for PSTN access. The engineer is developing a test plan for SRST using this new H.323 gateway. How does the engineer validate that H.323 call routing is working in a failover scenario?

    A. When the WAN is down, dial another extension in the office.
    B. When the WAN is down, dial an extension at another site in the network.
    C. Establish a call through the gateway and drop the WAN link to see if the call is preserved.
    D. Establish a call through the gateway, place it on hold, and retrieve it.
    E. When the WAN is down, place a new local call and long distance call.

    Answer: C

    NEW QUESTION 389
    When configuring a SIP route pattern, which two provide the basis for routing? (Choose two.)

    A. Domain name
    B. MAC address
    C. IP address
    D. Directory number
    E. E.164 number

    Answer: AC

    NEW QUESTION 390
    An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two markings can be used for voice traffic? (Choose two.)

    A. dscp ef
    B. cos 6
    C. ip precedence 5
    D. dscp 5
    E. cos 4
    F. ip precedence 3

    Answer: AC

    NEW QUESTION 391
    Which two options are correct description of Media Resources? (Choose two.)

    A. Codec-selection
    B. Dial peers
    C. VAD
    D. Music on hold
    E. Annunciator

    Answer: DE

    NEW QUESTION 392
    What is the decimal value of DSCP marking Expedited Forwarding?

    A. 41
    B. 46
    C. 34
    D. 48

    Answer: B

    NEW QUESTION 393
    Which purpose of the Dialed Number Analyzer within Cisco Unified Communications Manager is true?

    A. It provides a way to retrieve only the called number when examining CDR logs.
    B. It is used as a troubleshooting tool as it provides an efficient way to analyze the dial plan.
    C. It allows the administrator to see the dialed number (DNIS) of a call in real time as the call is being placed.
    D. It helps sort and analyze CDR logs.

    Answer: B

    NEW QUESTION 394
    Which component must an engineer configure before configuring SIP route pattern?

    A. SIP trunk
    B. route filter
    C. route partition
    D. calling search space

    Answer: A

    NEW QUESTION 395
    Which two devices support voice and video capabilities simultaneously? (Choose two.)

    A. Cisco TelePresence Codec C40
    B. Cisco 7975 IP phone
    C. Cisco 7960 IP phone
    D. Intercluster trunk
    E. Cisco 7940 IP phone

    Answer: AB

    NEW QUESTION 396
    An engineer is configuring Cisco IOS-based MTP for video call. Which requirement must be met?

    A. Minimum sessions must be set to 4.
    B. Maximum sessions must be set to 100.
    C. Passthrough must be enabled.
    D. Passthrough must be disabled.

    Answer: C

    NEW QUESTION 397
    Media resources provide which two services? (Choose two.)

    A. annunciator
    B. codec selection
    C. dial peers selection
    D. voice activity detection (VAD)
    E. music on hold

    Answer: AE

    NEW QUESTION 398
    Which statement best describes the relationship between a route pattern, route group, and route list?

    A. Route group are members within a route list, and a route list is assigned to a route pattern.
    B. Route list contain a range of route patterns, and route groups contain route lists.
    C. Route patterns are assigned to either route lists or route groups.
    D. Route lists are members within a route list, and a route group is assigned to a route pattern.

    Answer: A

    NEW QUESTION 399
    What are three features of Cisco Unified Border Element? (Choose three.)

    A. Address Hiding
    B. Automated Alternate Routing
    C. Bandwidth Control
    D. Video Integration
    E. Protocol Interworking
    F. Admission Request

    Answer: DEF

    NEW QUESTION 400
    Which two options can a route pattern be assigned? (Choose two.)

    A. a gateway that is assigned to a route group
    B. a route list with no route groups configured
    C. a gateway
    D. a layer 3 switch
    E. a route list with one or more route groups configured

    Answer: BC

    NEW QUESTION 401
    ……

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (401Q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy that link and open it in your web browser!!!)]

  60. Gerardo Madrid
    September 25th, 2019

    BTW:

    1. PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (483q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (283q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  61. Anonymous
    September 26th, 2019

    NEW QUESTION 386
    In Cisco Unified Communications Manager, for which type of trunk is URI dialing available?

    A. SIP
    B. H.323
    C. H.225
    D. QSIG

    Answer: A

    NEW QUESTION 387
    Through which two configuration elements are off-net calls routed in inbound and outbound direction respectively?

    A. Inbound CSS and route groups.
    B. Inbound CSS and device pools.
    C. Route lists and outgoing CSS.
    D. Route patterns and outgoing CSS.

    Answer: A

    NEW QUESTION 388
    An engineer is developing a new SRST configuration for a branch router using PRI for PSTN access. The engineer is developing a test plan for SRST using this new H.323 gateway. How does the engineer validate that H.323 call routing is working in a failover scenario?

    A. When the WAN is down, dial another extension in the office.
    B. When the WAN is down, dial an extension at another site in the network.
    C. Establish a call through the gateway and drop the WAN link to see if the call is preserved.
    D. Establish a call through the gateway, place it on hold, and retrieve it.
    E. When the WAN is down, place a new local call and long distance call.

    Answer: C

    NEW QUESTION 389
    When configuring a SIP route pattern, which two provide the basis for routing? (Choose two.)

    A. Domain name
    B. MAC address
    C. IP address
    D. Directory number
    E. E.164 number

    Answer: AC

    NEW QUESTION 390
    An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two markings can be used for voice traffic? (Choose two.)

    A. dscp ef
    B. cos 6
    C. ip precedence 5
    D. dscp 5
    E. cos 4
    F. ip precedence 3

    Answer: AC

    NEW QUESTION 391
    Which two options are correct description of Media Resources? (Choose two.)

    A. Codec-selection
    B. Dial peers
    C. VAD
    D. Music on hold
    E. Annunciator

    Answer: DE

    NEW QUESTION 392
    What is the decimal value of DSCP marking Expedited Forwarding?

    A. 41
    B. 46
    C. 34
    D. 48

    Answer: B

    NEW QUESTION 393
    Which purpose of the Dialed Number Analyzer within Cisco Unified Communications Manager is true?

    A. It provides a way to retrieve only the called number when examining CDR logs.
    B. It is used as a troubleshooting tool as it provides an efficient way to analyze the dial plan.
    C. It allows the administrator to see the dialed number (DNIS) of a call in real time as the call is being placed.
    D. It helps sort and analyze CDR logs.

    Answer: B

    NEW QUESTION 394
    Which component must an engineer configure before configuring SIP route pattern?

    A. SIP trunk
    B. route filter
    C. route partition
    D. calling search space

    Answer: A

    NEW QUESTION 395
    Which two devices support voice and video capabilities simultaneously? (Choose two.)

    A. Cisco TelePresence Codec C40
    B. Cisco 7975 IP phone
    C. Cisco 7960 IP phone
    D. Intercluster trunk
    E. Cisco 7940 IP phone

    Answer: AB

    NEW QUESTION 396
    An engineer is configuring Cisco IOS-based MTP for video call. Which requirement must be met?

    A. Minimum sessions must be set to 4.
    B. Maximum sessions must be set to 100.
    C. Passthrough must be enabled.
    D. Passthrough must be disabled.

    Answer: C

    NEW QUESTION 397
    Media resources provide which two services? (Choose two.)

    A. annunciator
    B. codec selection
    C. dial peers selection
    D. voice activity detection (VAD)
    E. music on hold

    Answer: AE

    NEW QUESTION 398
    Which statement best describes the relationship between a route pattern, route group, and route list?

    A. Route group are members within a route list, and a route list is assigned to a route pattern.
    B. Route list contain a range of route patterns, and route groups contain route lists.
    C. Route patterns are assigned to either route lists or route groups.
    D. Route lists are members within a route list, and a route group is assigned to a route pattern.

    Answer: A

    NEW QUESTION 399
    What are three features of Cisco Unified Border Element? (Choose three.)

    A. Address Hiding
    B. Automated Alternate Routing
    C. Bandwidth Control
    D. Video Integration
    E. Protocol Interworking
    F. Admission Request

    Answer: DEF

    NEW QUESTION 400
    Which two options can a route pattern be assigned? (Choose two.)

    A. a gateway that is assigned to a route group
    B. a route list with no route groups configured
    C. a gateway
    D. a layer 3 switch
    E. a route list with one or more route groups configured

    Answer: BC

  62. Anonymous
    September 26th, 2019

    Congratulations Passed and get 962.

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    open link and get dumps
    tnd.li/b23cm7a9nk

  63. Anonymous
    September 26th, 2019

    NEW QUESTION 398
    Which statement best describes the relationship between a route pattern, route group, and route list?

    A. Route group are members within a route list, and a route list is assigned to a route pattern.
    B. Route list contain a range of route patterns, and route groups contain route limsts.
    C. Route patterns are assigned to either route lists or route groups.
    D. Route lists are members within a route list, and a route group is assigned to a route pattern.

    Answer: A

  64. Anthony 01
    September 30th, 2019

    new

  65. Yong Im
    September 30th, 2019

    i need the new 300-075 exam Qs.

  66. Oliver Stoeger
    September 30th, 2019

    anybody who can kindly share the new 300-075 exam questions?

    thanks.

  67. Hein Zaw
    September 30th, 2019

    NEW QUESTION 468
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

  68. Hein Zaw
    September 30th, 2019

    NEW QUESTION 469
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

  69. Hein Zaw
    September 30th, 2019

    NEW QUESTION 470
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

  70. Hein Zaw
    September 30th, 2019

    NEW QUESTION 471
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

  71. Hein Zaw
    September 30th, 2019

    NEW QUESTION 472
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

  72. Ade Ola
    September 30th, 2019

    Hello!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 484
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 485
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 486
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 487
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 488
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 489
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 490
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 491
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 492
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 493
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 494
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

    NEW QUESTION 495
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 496
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 497
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 498
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (500q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  73. Ade Ola
    September 30th, 2019

    More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (401q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (283q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  74. Anonymous
    October 1st, 2019

    NEW QUESTION 484
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 485
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 486
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 487
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 488
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 489
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 490
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 491
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 492
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Sweonfiguration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 493
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 494
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a blockdw learned pattern.

    Answer: C

    NEW QUESTION 495
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 496
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 497
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

  75. Passed Successfully
    October 1st, 2019

    Congratulations Passed and get 962/1000

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    open link and get dumps
    tnd.li/b23cm7a9nk

  76. Anonymous
    October 1st, 2019

    NEW QUESTION 493
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that regweister to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

  77. Maha
    October 1st, 2019

    Hi all, need your help please. 300-070!!!!!!!!!

    QUESTION 373
    Which number is the result of applying phone number mask 1234X5XX to number 54321?
    A.12344321
    B.12355321
    C.12354521
    D.12354321
    E.12344521
    Answer: B or E ??

    QUESTION 384
    An Engineer enters this configuration on a voice router
    Dial-peer voice 99 pots
    destination-pattern 115.
    Port 1/0/0
    Which digits does the router send out of the port 1/0/0 after the user dial the digits 1159?
    A.1159
    B.115
    C.59
    D.11
    E.9
    Answer: B or E ??

    NEW QUESTION 387
    Through which two configuration elements are off-net calls routed in inbound and outbound direction respectively?
    A. Inbound CSS and route groups.
    B. Inbound CSS and device pools.
    C. Route lists and outgoing CSS.
    D. Route patterns and outgoing CSS.
    Answer: A or D ??

    NEW QUESTION 390
    An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two markings can be used for voice traffic? (Choose two.)
    A. dscp ef
    B. cos 6
    C. ip precedence 5
    D. dscp 5
    E. cos 4
    F. ip precedence 3
    Answer: BF or BC ??

    NEW QUESTION 399
    What are three features of Cisco Unified Border Element? (Choose three.)
    A. Address Hiding
    B. Automated Alternate Routing
    C. Bandwidth Control
    D. Video Integration
    E. Protocol Interworking
    F. Admission Request
    Answer: BDF or BEF ??

    NEW QUESTION 400
    Which two options can a route pattern be assigned? (Choose two.)
    A. a gateway that is assigned to a route group
    B. a route list with no route groups configured
    C. a gateway
    D. a layer 3 switch
    E. a route list with one or more route groups configured
    Answer: A E or C D ??

  78. Maha
    October 1st, 2019

    there are two answers in the new dump. thanks.

  79. Maha
    October 1st, 2019

    Hi all, need your help please. 300-070!!!!!!!!! new answer, Sorry
    there are two answers in the new dump. thanks.

    QUESTION 373
    Which number is the result of applying phone number mask 1234X5XX to number 54321?
    A.12344321
    B.12355321
    C.12354521
    D.12354321
    E.12344521
    Answer: B or E ??

    QUESTION 384
    An Engineer enters this configuration on a voice router
    Dial-peer voice 99 pots
    destination-pattern 115.
    Port 1/0/0
    Which digits does the router send out of the port 1/0/0 after the user dial the digits 1159?
    A.1159
    B.115
    C.59
    D.11
    E.9
    Answer: A or E ??

    NEW QUESTION 387
    Through which two configuration elements are off-net calls routed in inbound and outbound direction respectively?
    A. Inbound CSS and route groups.
    B. Inbound CSS and device pools.
    C. Route lists and outgoing CSS.
    D. Route patterns and outgoing CSS.
    Answer: A or D ??

    NEW QUESTION 390
    An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two markings can be used for voice traffic? (Choose two.)
    A. dscp ef
    B. cos 6
    C. ip precedence 5
    D. dscp 5
    E. cos 4
    F. ip precedence 3
    Answer: CF or AC ??

    NEW QUESTION 399
    What are three features of Cisco Unified Border Element? (Choose three.)
    A. Address Hiding
    B. Automated Alternate Routing
    C. Bandwidth Control
    D. Video Integration
    E. Protocol Interworking
    F. Admission Request
    Answer: DEF or ADE ??

    NEW QUESTION 400
    Which two options can a route pattern be assigned? (Choose two.)
    A. a gateway that is assigned to a route group
    B. a route list with no route groups configured
    C. a gateway

  80. Anonymous
    October 3rd, 2019

    Passed 9xx, the dumps from itlibraries are still valid.

  81. Anonymous
    October 3rd, 2019

    Yey, dones with this awful exam, this are good enough to pass bit.ly/2IlEWAZ had only 2 questions which i messed up anyway :))

  82. Shailesh Bhamre
    October 8th, 2019

    Hello!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 484
    Where does an engineer configure Cisco Unified Communications Manager Directory URI?

    A. directory number
    B. Cisco IPC
    C. CSF-Jabber
    D. physical phone

    Answer: A

    NEW QUESTION 485
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 486
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 487
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 488
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 489
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 490
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 491
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 492
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 493
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 494
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

    NEW QUESTION 495
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 496
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 497
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 498
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (500q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  83. Shailesh Bhamre
    October 8th, 2019

    More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (401q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (283q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  84. Raji
    October 9th, 2019

    Anyone have

    Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2), 3rd Edition pdf?

    Please share {email not allowed}

  85. Raji
    October 9th, 2019

    Anyone have

    Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2), 3rd Edition pdf?

    Please share rajitha.kbsl @ g m a il.com

  86. kenjie
    October 10th, 2019

    Can anyone here verify the correct answer below?

    Which action configures PSTN backup for calls that are rejected by the gatekeeper CAC?
    A. Configure AAR in Cisco Unified Communications Manager.
    B. Configure CFUR in Cisco Unified Communications Manager.
    C. Configure a route pattern, a route list, and route groups to a trunk and a gateway in Cisco Unified Communications Manager.
    D. Configure a route pattern to a gateway in Cisco Unified Communications Manager.

    The answer from most dumps is C, but I think it should be A.

    Any thoughts?

  87. Free Premium File
    October 16th, 2019

    Congratulations Passed and get 962/1000

    D&D are valid no new one in my test
    BGP best path selection criteria
    ipv6 to Ipv4 , MPLS PHP

    open link and get dumps
    split.to/Ds2oI8e

  88. Anonymous
    October 16th, 2019

    NEW QUESTION 494
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block rosute pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

  89. opencom
    October 16th, 2019

    Hi everyone,

    Somebody send me ISO image (CUCM 10.x or CUMC 11.x)
    thank a lot
    poly_pan78[] hotmail.com

  90. Mahsa
    October 27th, 2019

    hello if any body here has new dumps for CIPTV2 ?
    can send for me mhs.ebrahimij@ gmail dot com

  91. ZiO
    October 29th, 2019

    Hello Guys

    I would like make this exam 300-075, but I think is very hard.
    My friends try it twue time and failed it, eh inform me there are only 50% question valid on the dump.
    Have you valid dumps for this exam?
    Can send for me -> zio @ didimail dot com

    Regards

  92. ABHIJEET
    November 3rd, 2019

    Hi can i get the 500Q brain dumps on my email id

    abhijeet*14789*@gmail.com

    remove the 2 stars

    from the below link i am not getting the questions from 300-500 completely

    od.lk/fl/NjFfMTUyNjExMF8

    i am planning to give the exam this november

  93. ABHIJEET
    November 3rd, 2019

    Hi,Also Question no 7

    What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints? (Choose two.)
    A. Media Resource Group List.
    B. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS.
    C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS.
    D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM.
    E. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM.

    is the correct answer to this question is B and E or C and D as per the brain dump

    because we configure neighbour zone in Cisco VCS control and SIP trunk towards Cisco VCS control in CUCM

  94. ZiO
    November 3rd, 2019

    Hello ABHIJEET

    In this DUMP there is a question on RTMT (How many traces…..)?
    Can you answer me?

    Regards

  95. Jason DeJarnatt
    November 4th, 2019

    Hello!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 485
    Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

    A. utils dbreplication clusterrest
    B. utils dbreplication quickaudit
    C. utils dbreplication rebuild
    D. utils dbreplication runtimestate

    Answer: D

    NEW QUESTION 486
    Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

    A. access layer switch
    B. branch router
    C. Cisco IP phone
    D. core layer switch

    Answer: A

    NEW QUESTION 487
    Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

    A. You can register endpoints to default zone.
    B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
    C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
    D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
    E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

    Answer: BE

    NEW QUESTION 488
    The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

    A. Size Safe
    B. Call Display Restriction Features
    C. CUCM Assistant Features
    D. Feature Safe

    Answer: A

    NEW QUESTION 489
    Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

    A. unique phone service for each Cisco Unified Communications Manager server
    B. automatically handled by Cisco Unified Communications Manager
    C. server load balancer virtual IP
    D. DNS A record with multiple IPs listed

    Answer: C

    NEW QUESTION 490
    Which two devices or applications support call preservation? (Choose two.)

    A. JTAPI applications
    B. CTI applications
    C. a software conference bridge
    D. an annunciator
    E. SIP trunks

    Answer: CE

    NEW QUESTION 491
    An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

    A. Configuration > Domains
    B. Configuration > Dial plan > Transforms
    C. Configuration > Dial plan > Search rules
    D. Configuration > Zones > Zones

    Answer: D

    NEW QUESTION 492
    Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

    A. Date/Time Group Configuration
    B. Cisco Unified CM Group Configuration
    C. Application Server Configuration
    D. Device Pool Configuration
    E. SRST Reference Configuration

    Answer: BE

    NEW QUESTION 493
    QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

    A. AF41 (34)
    B. EF (46)
    C. CS4 (32)
    D. CS3 (24)

    Answer: D

    NEW QUESTION 494
    An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

    A. Create a block transformation pattern.
    B. Create a block route pattern.
    C. Create a block translation pattern.
    D. Create a block learned pattern.

    Answer: C

    NEW QUESTION 495
    Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

    A. traversal subzone
    B. root zone
    C. default subzone
    D. default zone
    E. default registration zone

    Answer: D

    NEW QUESTION 496
    Which default DSCP marking value do telepresence endpoints use for video?

    A. CS4
    B. CS2
    C. AF41
    D. EF

    Answer: A

    NEW QUESTION 497
    A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

    A. 0
    B. 30
    C. 120
    D. 60

    Answer: C

    NEW QUESTION 498
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (500q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  96. Jason DeJarnatt
    November 4th, 2019

    What’s More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (401q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (283q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  97. Ali Hussain
    November 5th, 2019

    Hello!

    The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 509
    In RTMT, how many concurrent trace collections can you schedule to download the trace files to an SFTP or FTP server on your network?

    A. three
    B. four
    C. five
    D. six

    Answer: D

    NEW QUESTION 511
    An engineer is performing an international multisite deployment and wants to create an effective backup method to access TEHO destinations in case of call failure through primary route. Which technology provides this ability?

    A. AAR
    B. CFUR
    C. LRG
    D. SRST

    Answer: B

    NEW QUESTION 512
    ……

    P.S.

    PassLeader 300-075 dumps FYI:

    od.lk/fl/NjFfMTUyNjExMF8

    (514q~~~NEW VERSION DUMPS!!!)

    Good Luck!!!

    [(copy the short link and open it in your web browser!!!)]

  98. Ali Hussain
    November 5th, 2019

    What’s More:

    1. PassLeader 300-070 dumps FYI:

    od.lk/fl/NjFfMTUyNjEwOV8

    (401q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    2. PassLeader 300-080 dumps FYI:

    od.lk/fl/NjFfMTUyNjExM18

    (369q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    3. PassLeader 300-085 dumps FYI:

    od.lk/fl/NjFfMTUyNjExNF8

    (295q~~~NEW VERSION DUMPS!!!)

    ~~~~~~~~~~~~~~~~~~~~~~~

    Good Luck!!!

    [(copy those links and open them in your web browser!!!)]

  99. mahsa
    November 5th, 2019

    helloooooo nobody here hasnt new dumps for 300.075 ciptv2 ?

  100. kloo
    November 6th, 2019

    The most favorable price this year!
    Dumps for 70% off and Gifts for you.
    Free LAB, Free WRITTEN DUMPS.
    End this Black Friday Month.
    Never too late to Seize this opportunity.
    ciscodumps09 dot livejournal dot com/1509.html

Comment pages
1 … 33 34 35 36 37 405
Add a Comment


CAPTCHA Image
Reload Image