Share your ICOMM Experience

I have heard that this dump is valid 210-065

http://www.mediafire.com/download/bb7ig7wkind79hh/210-065.examcollection.premium.exam.182q.pdf

the exam also includes these 7 questions:

Q1:which command to assign manualy IP to EX series using CLI
****X command set network IPV4 address:****
****X configuration network address Ethernet0:****
****X configuration network IPV4 address NIC0:****
****X configuration network IPV4 address:**** this is my answer

Q2:how to initiate a cisco Telepresence 1310-65 camera calibration
****Troubleshoot>Hardware setup>setup>show focus target**** this is my answer
****Troubleshoot>Hardware setup>camera>show camera target****
****Harware setup>start>camera>setup>show focus target****
****Troubleshoot>Hardware setup>camera>setup>calibrate****

Q3:which two standard supported for streaming live video on cisco telepresence content server (choose two)
****H265****
****H263****this is my answer
****H270****
****H261****this is my answer
****H262****

Q4:when an engineer try to pull log from an cisco EX90 codec for call setup issue using “log ctx sip packet debug 9” nothing happen, how to enable this debug
****collect log from webinterface****
****enter log ctx sippacket debug all****
****ssh into the codec to view the log****
****enter the logoutput on command**** this is my answer

Q5:how to enable existing remote jabber to register to cucm without VPN
****expressway with jabber guest****
****vcs with jabber guest****
****expressway with MRA**** this is my answer
****vcs with MRA****

Q6:end user is on a cisco telepresence session with remote participant and can control the camera at the remote endpoint. which feature is underlying
****FECC**** this is my answer
****DTMF****
****FEC****
****PIP****

Q7:which two actions take place for proper operation when using Advanced Networking on VCS (choose two)
****automatic routing must be enabled****
****manual route must be added using x command routeadd****
****network interface must reside in the same subnet****
****NAT reflection must be enabled on the firewall**** this is my answer
****Network interface must reside in separate subnet**** this is my answer

Anyone have 155q in PDF?

Anyone know where to get CBT nugget videos for CICD?

@Ron Bevans

Please kindly share that valid PassLeader 210-060/210-065 dumps!!!

Please kindly share that valid PassLeader 210-060/210-065 dumps!!!

Please kindly share that valid PassLeader 210-060/210-065 dumps!!!

I just found some free new 210-060 dumps here:

http://www.mctsbible.com/?s=210-060

And, free 210-065 dumps:

http://www.mctsbible.com/?s=210-065

Hi,

Does anybody knows answer for “the correct order for for configuring the end user Cisco Unified Personal Communicator?” – Drag and Drop

Hi,

Passed today, new questions related to

1. Auto Attendant features
2. How to add users to CUCM (adding path)
3. How to add Cisco telepresence 4500 MCU to CUCM.

@Raj is valid the 165q ?

Hi,

155q is valid…!

But you must study well, cisco has changed questions..!

Hi @raj is the same simulation (laboratory) of 155q or also changed it??

Does anyone know the current passing score for the 210-065 exam???

@CJ
passing score is 860.

Can anyone share me the latest dump for 210-060 ?
For my email

Anyone know where to find the CBT nugget videos for 210-060

Thanks @Moh. Those new questions were also on there as well.

@CJ
Did you pass? were there any new questions?

@Mink try finding in extratorrent I downloaded all, CBT nuggets (2gb)

Can someone confirm if 155q dumps are still valid? I am sitting this exam on the 14th!!!

Took the Cisco 210-060 exam YESTERDAY and passed with a good score! Many new questions, about 15 new questions and a lot of questions on CUCM Serviceability, RTMT, etc., which seems not available in the official study guide. I got all questions from PassLeader 210-060 dumps (http://www.passleader.com/210-060.html), 100% valid now!!!

You can refer to here for learning the newest 210-060 exam questions:

https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE

@indula93. Thank you for that tip. I searched many torrent sites and couldn’t find it.

Anyone have the link to the new dumps?

Im sorry .. Valid dumps for 210-60?

can some one see if they can find the answer, seeing some inconsistency.

Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video system to a factory condition?
xcommand SystemUnit FactoryReset- this what is said is the answer

http://www.cisco.com/c/en/us/td/docs/telepresence/cucm_cts/cucm_cts_admin_book/guide/cucm_cts_admin/cucm_cts_admin_verification.html

this site says other wise..

Passed today using of 155q with plus 5 new questions.

link is for adding user on cucm

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b08uspha.html

and know telepresence 4500 cucm also.

can any one share the new 5 question?

Sat exam today. 155q is mostly valid.

I encountered 5 new exam questions. Please study hard!

@Duran can you share the new 5 question? please

Can you share the 155q please. I really need it.

I have converted the file that Moh gave earlier for 155q.
@ Duran and Cutie – Can you confirm if this is the same 155q u studied from below?
Exam collation 155q – https://filetea.me/default/#t1sjiaPbHA6TFWRPm1b1cWFtA

@Mike

Thank so much for converting it, but the file is not found.

Can you please upload it on another website?

hi all … Please confirm if 210-065 is still valid??

@Mary
Yes it i! I just passed the 210-065 exam.

..

Moh i will try to upload the pdf later today.

@Moh yeah I passed. The only new questions i saw were the ones you posted. All others were on the 192q from PL.

Passed 210-065 exam yesterday and 210-060 exam recently!

PassLeader 210-060/210-065 dumps are still 100% valid now, they have updated dumps with 8-10 new questions.

210-060 dumps collection: http://www.mctsbible.com/?s=210-060

210-065 dumps collection: http://www.mctsbible.com/?s=210-065

Good Luck!

Passed 210-065 today 18/07/2016 with a score of 930

182q is valid however there are 5-10 new questions

Some of which are listed in above posts

Resources used
CBT nuggets
182q

Hey Guys,

I see a lot of people talking about the new set of exams. I was lookign at still passing the old 640-461 before the cut-off date. Could somebody please send me:
Cisco.Actualtests.640-461.v2014-01-16.by.Amy Cisco.Actualtests.640-461.v2014-01-07.by.Judy

to {email not allowed}

Thanks very much and good luck to everybody take exams soon,

Dan

@Dan, sorry to say that but
640-461 ICOMM
Last day to test was : September 17, 201

September 17, 2015

What about 165q (210-060) is valid?

I’m new to vce files and the search function on this page is no help. I have been going back to see if anyone suggest any good vce sim played. I know that the Cisco 210-060 have some sims in 155q. is there a vce player what lets you work the sim (console interface) like its suppose to?

NM I got it working

are there any SIM in 210-060 exam?

Passed both 210-060 and 210-065 exam recently!

Used PassLeader 210-060/210-065 dumps for preparing for exams, 100% valid now!

210-060 dumps: https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE

210-065 dumps: http://www.mctsbible.com/?s=210-065

in exam 210-060 have 1 labs ? dump 155q haven’t lab yea?

@Moh
Thank you, passed 210-065 today with 910 score
Moh updated questions are valid.

I have heard that this dump is valid 210-065
http://www.mediafire.com/download/bb7ig7wkind79hh/210-065.examcollection.premium.exam.182q.pdf
the exam also includes these 7 questions:
Q1:which command to assign manualy IP to EX series using CLI
****X command set network IPV4 address:****
****X configuration network address Ethernet0:****
****X configuration network IPV4 address NIC0:****
****X configuration network IPV4 address:**** this is my answer
Q2:how to initiate a cisco Telepresence 1310-65 camera calibration
****Troubleshoot>Hardware setup>setup>show focus target**** this is my answer
****Troubleshoot>Hardware setup>camera>show camera target****
****Harware setup>start>camera>setup>show focus target****
****Troubleshoot>Hardware setup>camera>setup>calibrate****
Q3:which two standard supported for streaming live video on cisco telepresence content server (choose two)
****H265****
****H263****this is my answer
****H270****
****H261****this is my answer
****H262****
Q4:when an engineer try to pull log from an cisco EX90 codec for call setup issue using “log ctx sip packet debug 9” nothing happen, how to enable this debug
****collect log from webinterface****
****enter log ctx sippacket debug all****
****ssh into the codec to view the log****
****enter the logoutput on command**** this is my answer
Q5:how to enable existing remote jabber to register to cucm without VPN
****expressway with jabber guest****
****vcs with jabber guest****
****expressway with MRA**** this is my answer
****vcs with MRA****
Q6:end user is on a cisco telepresence session with remote participant and can control the camera at the remote endpoint. which feature is underlying
****FECC**** this is my answer
****DTMF****
****FEC****
****PIP****
Q7:which two actions take place for proper operation when using Advanced Networking on VCS (choose two)
****automatic routing must be enabled****
****manual route must be added using x command routeadd****
****network interface must reside in the same subnet****
****NAT reflection must be enabled on the firewall**** this is my answer
****Network interface must reside in separate subnet**** this is my answer

Does anyone have new 201-060 dumps please.

Please share. writing this Friday.

@LOVE

here is the dumps

https://drive.google.com/drive/folders/0B6fTufdsQFeLMzZ2bDNybzQ4TWM

can you also convert the 210-060 file to pdf please?

Hello,
Does the exam CICD 210-060 include Lab (Configuration and stuff) or Simlet (inspect configuration and multiple choice answer)?

Mob did u take 210-60

Moh*

@love did u take 210-60?

@David
No I didn’t.
I have heard that there are 4-7 new questions out of this dump. And I’ve for people to share it!

@Moh.
Great please keep us updated. You are very helpful, i appreciate it.

Passed 210-060 yesterday!

Premium PassLeader 165q dumps is still valid! (http://www.passleader.com/210-060.html)

3 new questions one of them is what’s required to configure the telepresence unit.

Also one of the questions about LDAP sync which is in tge dump but in the exam it asks you for the config location of LDAP sync in CUCM.

Good Luck!

Question for the people that took it. Are there any labs in 210-060?

155Q for 210-060 still valid , i passed today
found 3 new question

Passed with 900+ score
155Q version was pretty valid, also about 3-4 new Qs showed up

some info recalled :

MCU 4500 registration in CUCM (chose two)
-sip profile
-media bridge
-XML
-AXL

Jabber how to place a call (NOT video call)
-person icon
-contact icon
-phone icon
-video conference icon

Planning to add 2nd receptionist due to high call volumes – what report needs to be utilized
-gateway utilization
-hunt group
-pickup group report
-xxx

An engineer recieves an isolated report that the customer can make calls successfully from an IP phone to other IP..
– some answers are modified but same thing:

-test the call using DNA in CUCM
-check calling search space in CUCM

CUCM DN configuration required fields

-owner id
-record call
-xxx
-xxx

also some Q’s are slightly modified (two answers options available instead of three etc)

For those who can’t still get the thing – no tasks to configure on the exam @ Simlets
there’s a simlet given so you just do the config output (yeah it’s – sh run) and check the stuff in order to answer 4Qs followed by
hope this can help

Cheers !

Hi, @love did you take 210-060 the last friday?

Hi Guys

I couldn’t find any valid link to download 210-060 dump
Is there pdf dump?
Could anyone here help me?

Many thanks

Someone recently took the test, be honest

@Chris
the dump is in VCE. If you convert it to pdf, please share it.

https://drive.google.com/folderview?id=0B6fTufdsQFeLMzZ2bDNybzQ4TWM&usp=sharing

Hi guys,

can someone share the link to download the CBT nuggets video for CICD?

Thanks in advance.

@Boy Bawang search in extra torrent, like CICD or Colloboration something. I got it through that!

Hi everyone! Just an inquiry…how many VCE licenses are included if i purchase the dumps through Passleader??? Appreciate any feedback…

Bought the 155q 210-060 premium dumps from examcollection.com for 49.99USD. It is valid, I passed the exam with flying colors. For those of you who are interested, I can share the PDF and VCE file for a fraction of the price that I paid for. Shoot me an email at {email not allowed}

Bought the 155q 210-060 premium dumps from examcollection.com for 49.99USD. It is valid, I passed the exam with flying colors. For those of you who are interested, I can share the PDF and VCE file for a fraction of the price that I paid for. Shoot me an email at

d e b x w a i d e n a t g m a i l d o t c o m

There is only 1 lab, no configurations needed, you just need to do a sh run command and figure out why the call is not connecting. Its provided in the 155q dumps.

Hello,

Anyone knows how to download free VCE simulator?
many thanks

Sorry i been busy and didn’t get a chance to upload the PDF for 210-60.
Here it is. http://www.mediafire.com/download/rtwi95vs777z0od/210.60+155q.pdf
Let us know if this is valid or not if you use it.

@Mink Thank you very much
could anyone share CBT Naggets videos for 210-60?

@MoH and LOVE
210-065
thank you for sharing the questions.
I have some remark:

Q2:how to initiate a cisco Telepresence 1310-65 camera calibration
****Troubleshoot>Hardware setup>setup>show focus target**** this is my answer
****Troubleshoot>Hardware setup>camera>show camera target****
****Harware setup>start>camera>setup>show focus target****
****Troubleshoot>Hardware setup>camera>setup>calibrate****

I believe that correct answer is
Troubleshoot>Hardware setup>camera>show camera target****
please check this link (Page 3-16):
http://www.cisco.com/c/en/us/td/docs/telepresence/cts_1300/cts_1310/assembly/guide/1310_assembly_guide.pdf

For Q7
Q7:which two actions take place for proper operation when using Advanced Networking on VCS (choose two)
****automatic routing must be enabled****
****manual route must be added using x command routeadd****
****network interface must reside in the same subnet****
****NAT reflection must be enabled on the firewall**** this is my answer
****Network interface must reside in separate subnet**** this is my answer

I believe correct answers are:
****NAT reflection must be enabled on the firewall****
****manual route must be added using x command routeadd****

Please check this link
http://www.cisco.com/c/en/us/support/docs/unified-communications/expressway/118992-configure-nat-00.pdf

@Mink
Thank you so much for converting the file.
The is working fine this time.

@Moh
No problem. Sorry for the delay. When are you taking the 210-60?

@Moh
Can you share your email to me, so we can communicate more frequently?

Also passed 210-060 yesterday!

3 new questions (what’s required to configure the telepresence unit…etc.)

And, one of the questions about LDAP sync which is in tge dump but in the exam it asks you for the config location of LDAP sync in CUCM.

I learned all questions from PassLeader 210-060 VCE dumps (http://www.passleader.com/210-060.html), 100% valid now!

P.S. PassLeader offer free VCE Simulator along with it VCE dumps, which saved me a lot to buy VCE Simulator.

Good Luck, All!

@Mink
I’m taking the exam on Thursday.
Here is my email: {email not allowed}

@moh
Awesome. I hope you pass the exam. What did u use to prepare for the exam?
Also the email was blocked, pls put it in a weird format so doesn’t get blocked.

By the way it’s mink

alwabel141 at gmail dot com

@moh. What did u use to prepare for the exam? Book? Videos?

I passed my 210-060 today. there are +5 new questions from 155q

@mink. I used the OCG and the dumps.

good luck!! @Moh

@Larry M. Walker

Congratulations!

I also passed my 210-060 exam yesterday by learning questions from that 165q PassLeader 210-060 dumps, 100% valid now!

165q PassLeader 210-060 dumps: http://www.passleader.com/210-060.html (VCE and PDF, and Free Version Of VCE Simulator)

Good Luck!

@moh ¿Did you pass the test (210-060)?

@Jeremy
I didn’t take the exam yet.
I had to postpone the exam. I’m taking it on Sunday.

Ppl that are posting pass leader site , are they just ads?

@moh what is ocg?

@mink
Official Cert Guide.

@moh . As far as the dumps you studied 155q that u provided ?

@moh ¿Did you pass the exam (210-060)?

is 210-065 182q still valid?

is 210-065 182q still valid?