The new PassLeader 210-065 dumps (April/2019 Updated) now are available, here are part of 210-065 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 401
An engineer must create a SIP trunk profile on Cisco Unified Communications Manager. Which menu navigation sequence accomplishes this task?
A. System > Service Parameters > SIP Trunk Security Profile
B. Device > Device Setting > SIP Trunk Security Profile
C. System > Security > SIP Trunk Security Profile
D. Device > Trunk
Answer: C
NEW QUESTION 402
Which feature enables the hosting of a multipoint conference locally on a Cisco TelePresence endpoint without the use of an external bridge?
A. multisite
B. MCU
C. multipoint
D. VCS
E. multiway
Answer: A
NEW QUESTION 403
A Cisco TelePresence EX90 endpoint is not registering successfully, and the endpoint IP address is not known. What is the proper method to obtain the current IP address of the device?
A. Reboot the device, and watch the screen for the IP address at system boot.
B. Use Telnet to connect to the MAC address of the device, and type “STATICA”.
C. Display the IP on the Cisco TelePresence EX90 screen by using the Cisco TelePresence Remote Control.
D. Connect a computer to the NIC on the Cisco TelePresence EX90, and enable DHCP.
E. Use the Cisco TelePresence Touch Control system menu.
Answer: E
NEW QUESTION 404
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?
A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
B. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.
C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
Answer: A
NEW QUESTION 405
An engineer wants to select a different camera layout to send to different users. Which video surveillance software component allows camera layouts?
A. Virtual Matrix
B. Operations Manager
C. Integrated Services Router
D. Media Server
Answer: A
NEW QUESTION 406
Which Cisco TelePresence system includes three cameras and a second row of seating for meeting participants?
A. TelePresence TX9000
B. Cisco TelePresence System 1300
C. Cisco TelePresence System 1100
D. Cisco TelePresence TX9200
Answer: D
NEW QUESTION 407
What are two characteristics of room acoustics regarding Cisco TelePresence Systems that should be avoided? (Choose two.)
A. low ambient SPL
B. high reverberation
C. ambient noise level 36dBA
E. NRC of .75
Answer: BD
NEW QUESTION 408
……
Get more NEW PassLeader 210-065 exam questions from here:
Hello Guys
any news for de 210-060 testing ? is the 309q dump still valid ?
VOIP_VOIP
April 24th, 2019
Hey all, please share the new questions for who took the test 210 – 060 recently and advise if 309 passleader is enough to pass, good luck in advance ya’ll.
ramo
April 24th, 2019
Hello evryone
i need a valid dumps CCID 210-060
thanks a lot
Anonymous
April 24th, 2019
Ksbxb
Anonymous
April 24th, 2019
A. System > Service Parameters > SIP Trunk Security Profile
B. Device > Device Sejsndtting > SIP Trunk Security Profile
C. System > Security > SIP Trunk Security Profile
D. Device > Trunk
Answer: C
NEW QUESTION 402
Which feature enables the hosting of a multipoint conference localbdbdndxbxbly on a Cisco TelePresence endpoint without the use of an external bridge?
A. multisite
B. MCU
C. multipoint
D. VCS
E. multiway
Answer: A
NEW QUESTION 403
A Cisco TelePresence EX90 endpoint is not registering successfully, and the endpoint IP address is not known. What is the proper method to obtain the current IP address of the device?
A. Reboot the device, and watch the screen for the IP address at system boot.
B. Use Telnet to connect to the MAC address of the device, and type “STATICA”.
C. Display the IP on the Cisco TelePresence EX90 screen by using the Cisco TelePresence Remote Control.
D. Connect a computer to the NIC on the Cisco TelePresence EX90, and enable DHCP.
E. Use the Cisco TelePresence Touch Control system menu.
Answer: E
NEW QUESTION 404
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?
A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
B. Hold the munznxte button down for 20 seconds while you power on the Touch 8 controller.
C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
Answer: A
NEW QUESTION 405
An engineer wants to select a different camera layout to send to different users. Which video surveillance software component allows camera layouts?
A. Virtual Matrix
B. Operations Manager
C. Integrated Services Router
D. Media Server
Answer: A
NEW QUESTION 406
Which Cisco TelePresence system includes three cameras and a second row of seating for meeting participants?
A. TelePresence TX9000
B. Cisco TelePresence System 1300
C. Cisco TelePresejdbxnce System 1100
D. Cisco TelePresence TX9200
Answer: D
NEW QUESTION 407
What are two characteristics of room acoustics regarding Cisco TelePresence Systems that should be avoided? (Choose two.)
A. low ambient SPL
B. high revernsbzberation
C. ambient noise level 36dBA
E. NRC of .75
NEW QUESTION 405
An engineer wants to select a different camera layout to send to different users. Which video surveillance software component allows camera layouts?
A. Virtual Matrix
B. Operations Manager
C. Integrated Services Router
D. Media Server
Answer: A
NEW QUESTION 406
Which Cisco TelePresence system includes three cameras and a second row of seating for meeting participants?
A. TelePresence TX9000
B. Cisco TelePresence System 1300
C. Cisco TelePrejhsejdbxnce System 1100
D. Cisco TelePresence TX9200
Answer: D
failed
April 24th, 2019
210-060 there are from 10 to 15 new question on the exam, dont trust the 309q dumps out there because none of them have the questions, if you plan to do the test soon my advice is to reschedule until we find the new questions
Elizabeth
April 24th, 2019
Passed too today using the same dump posted by Emma
@failed, sorry to hear that, and thanks for sharing your experience.. could you share some of what you remember of the new questions?
Failed
April 28th, 2019
@VOIP_VOIP
I remember only about a question asking how to extract phone reports using CUCM, but it was not using route plan report.. and another question asking about IM and presence what they stand for and I think there was a answer IM chat.. the rest I don’t remember, I just know that I never saw those question in here or any dump out there.
Anonymous
April 29th, 2019
Hi! All!!!
Finally PASSED 210-060 and 210-065 recently!!!
I used the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, valid enough for passing now!
Good Luck!
P.S.
Part of PassLeader 210-060 dumps and 210-065 dumps are available here:
hello, anyone that tested Vceplus can confirm if 383q for 210-060 is valid ?
vampire
May 3rd, 2019
@Failed
Can you share your dump for 210-060
My email : pxtrinh99 @ gmail . com
Tks very much !
ramo
May 4th, 2019
I am looking for dumps 210-060.
how do i buy it
Thank you
Joel Westerlund
May 6th, 2019
Thanks for sharing!
Luckily passed the 210-060/210-065 exam recently.
Questions are all available in that new PassLeader 210-060/210-065 dumps, just few answers are not same as the actual 210-060/210-065 test.
Thanks for updated PassLeader 210-060/210-065 dumps, helpful!
Good luck, all!
ben
May 7th, 2019
Recently passed exam 300-080 using latest spoto177 dated Apr/19 (mht file) and got 2 new questions more; trying to recover cost. If you want to share it with, i can offer it at 30 USD, email me at benvaras2 at Gmail com
Anonymous
May 8th, 2019
C. System > Security > SIP Trunk Security Profile
D. Device > Trunk
Answer: C
NEW QUESTION 402
Which feature enables the hosting of a multipoint conference localbdbdndxbxbly on a Cisco TelePresence endpoint without the use of an external bridge?
A. multisite
B. MCU
C. multipoint
D. VCS
E. multiway
Answer: A
NEW QUESTION 403
A Cisco TelePresence EX90 endpoint is not registering successfully, and the endpoint IP address is not known. What is the proper method to obtain the current IP address of the device?
A. Reboot the device, and watch the screen for the IP address at system boot.
B. Use Telnet to connect to the MAC address of the device, and type “STATICA”.
C. Display the IP on the Cisco TelePresence EX90 screen by using the Cisco TelePresence Remote Control.
D. Connect a computer to the NIC on the Cisco TelePresence EX90, and enable DHCP.
E. Use the Cisco TelePresence Touch Control system menu.
Answer: E
NEW QUESTION 404
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?
A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
B. Hold the munznxte button down for 20 seconds while you power on the Touch 8 controller.
C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
Answer: A
NEW QUESTION 405
An engineer wants to select a different camera layout to send to different users. Which video surveillance software component allows camera layouts?
A. Virtual Matrix
B. Operations Manager
C. Integrated Services Router
D. Media Server
Answer: A
NEW QUESTION 406
Which Cisco TelePresence system includes three cameras and a second row of seating for meeting participants?
A. TelePresence TX9000
B. Cisco TelePresence System 1300
C. Cisco TelePresejdbxnce System 1100
D. Cisco TelePresence TX9200
Answer: D
NEW QUESTION 407
What are two characteristics of room acoustics regarding Cisco TelePresence Systems that should be avoided? (Choose two.)
A. low ambient SPL
B. high revernsbzberation
C. ambient noise level 36dBA
E. NRC of .75
Anonymous
May 8th, 2019
Hello,
I passed the exam today (985/1000)
All the questions were from this dump (Updated this month with the new questions)
Which directory number setting defines calling permissions?
A calling search space
B external phone mask
C associated devices
D route partition
A
Which action can an engineer take to ensure that calling privileges are uniform for a user with a phone that has multiple lines?
A Enable Dependency Records for CSS.
B Configure Called Party Transformation CSS.
C Configure CSS on IP phone.
D Configure CSS on individual lines.
D
An engineer has updated the company dial plan and wants to get rid of unassigned numbers. Which action must be taken in Cisco Unified Communications Manager to accomplish this task?
A Delete unassigned DNS under Route Group.
B Delete unassigned DNS under Route Plan Report
C Delete unassigned DNS under Route Pattern.
D Delete unassigned DNS under Route List
B
passhot dot com
May 9th, 2019
hi，guys valid dumps，look my name
Ebrahem
May 10th, 2019
Hello,
I passed the exam today (985/1000)
All the questions were from this dump (Updated this month with the new questions)
Questions are all available in that new PassLeader 210-060/210-065 dumps, just few answers are not same as the actual 210-060/210-065 test.
Thanks for updated PassLeader 210-060/210-065 dumps, helpful!
Good luck, all!
+1
Ebrahem fake fake….
May 14th, 2019
Ebrahem IS FAKE FAKE FAKE ..
Ebrahem IS FAKE FAKE FAKE ..
DON’T USE Ebrahem FAKE FAKE FAKE DUMPS
koko
May 14th, 2019
Hello Guys,
share exam questions
pass hot dot com
jimx
May 15th, 2019
passleader 309q or passleadervce 382q?
Can you share your dump for 210-060
My email : mikeway87@ hotmail . com
Thanks very much !
kayy
May 15th, 2019
kindly to share dump for 210-060 for me
this my email : enjoyhostpot @ gmail . com
Thanks you very much !
Das Envio
May 15th, 2019
Any one share the latest dumps.
VOIP_VOIP
May 17th, 2019
@failed, the last update of Vceplus 383, from what I see the last 83 is only about Video or Camera not sure if this really part of 210-060 exam or they just mix it up, cuz none of these question on the cisco voice part subject. but I just going to study them who nows LOL.
@failed -> @Success
May 17th, 2019
@VOIP_VOIP, Yesterday i did the test 210-060, and passed 914, the was a lot of questions that it is not on the dump like 15 but they are not hard, the rest was on the dump, with diferente texting and some differnt answers, it includes some CME, jabber and general CUCM, they are not tricky, if you studied the content you should find the correct answer easily. No vídeo at all questions, no drag and drop, no jabber tshoot questions. there was only straight and forward questions, or select 2 right answers and that’s it. i wish you good luck, maybe you are right maybe the 300 to 383 is for the 210-065… thanks all
VOIP_VOIP
May 18th, 2019
@faild, that is the most great news I have heard for today congrats! I scheduled my exam for Monday, thanks a lot for sharing!
CoughIP
May 18th, 2019
{email not allowed}—Prepping for 210-060—2 Mondays from now. Will share my experience as I go. Thanks.
Videohelp
May 18th, 2019
@failed Congrats !!!! have you planned the next exam 210-065 ?
@ALL please share exam experience !!!!!!! anyone have passed 210-065 recently ?
THX
VOIP_VOIP
May 19th, 2019
Guys what is the correct answer for this question?
QUESTION 302
Two IP phones configured in the same office have a phone call in progress when the Call Manager they are registered to fails. Which result is true?
A.The call remains active, and the Cisco IP Phones enable SIP proxy mode for RTP
B.The call is immediately disconnected
C.The call remains active but features such as MOH and Transfer are unavailable for the rest of the call
D.The call disconnects after the RTP/RTCP keepalive between the IP phones and Call Manager fails.
vampire
May 20th, 2019
@VOIP_VOIP
Can you share your dump for 210-060
My email : pxtrinh99 @ gmail . com
Tks very much !
Jose Moreno
May 20th, 2019
@Kyle Stevens
Congratulations!!!
Would you like to share that PassLeader 210-060/210-065 dumps (new version) with VCE or PDF file?
All questions was from dumps no need to learn more
My Marks: 9xx/1000
Anonymous
May 20th, 2019
NEW QUESTION 404
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?
A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
B. Hold the munznxte button down for 20 seconds while you power on the Touch 8 controller.
C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
Answer: A
VOIP_VOIP
May 20th, 2019
Hey all, I passed the exam today with 9XX, most of the questions were from passLeader 309 Q. It was not that hard. I will share some of the new questions I that I got shortly and I will also share the dumps here so it will be available for everyone. Thanks all whom share their experience.
Failed
May 21st, 2019
@VOIP_VOIP i told you man =P congratz for passing too on this test lets go to 210-065 now hahaha
Zoe
May 21st, 2019
Passed too using the same dump
emagcreator.com/ikki/210117060/?trial
Jimx
May 22nd, 2019
Hi VoIP,
Can you share the new questions and the dumps pls
I going to take the 210-060 exam tomorrow
mikeway87 @ hotmail.com
Best regards,
Jimx
May 22nd, 2019
Guys what is the correct answer for this question?
QUESTION 302
Two IP phones configured in the same office have a phone call in progress when the Call Manager they are registered to fails. Which result is true?
A.The call remains active, and the Cisco IP Phones enable SIP proxy mode for RTP
B.The call is immediately disconnected
C.The call remains active but features such as MOH and Transfer are unavailable for the rest of the call
D.The call disconnects after the RTP/RTCP keepalive between the IP phones and Call Manager fails.
passed exam 300-080(spoto177) and 300-085(spoto157) and got new questions; trying to recover cost. If you want to share it with, can offer it for a price, email me at benvaras2 at Gmail com
Soobhan Rostom
May 27th, 2019
Please
Soobhan Rostom
May 27th, 2019
Share
Soobhan Rostom
May 27th, 2019
Please share.
Soobhan Rostom
May 27th, 2019
Please share 210-060/210-065.
Soobhan Rostom
May 27th, 2019
Please share 210-060/210-065 dumps.
Thanks!
Rohit Gupta
May 27th, 2019
Congratulations!!!
Finally PASSED 210-060 and 210-065 recently!!!
I used the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, valid enough for passing now!
Good Luck!
Rohit Gupta
May 27th, 2019
P.S.
Part of PassLeader 210-060 dumps and 210-065 dumps are available here:
210-060 dumps:
bit.ly/210-060-dumps-online
(309q~~~NEW VERSION DUMPS)
210-065 dumps:
bit.ly/210-065-dumps-online
(412q~~~NEW VERSION DUMPS)
Good Luck!!!
Failed
May 27th, 2019
@VOIP_VOIP / @Voicehelp
I did not started the 210-065 yet, i was enjoying my free time these days but now i want to start the 210-065 study, where do you recommend to start the material ? Do you guys have anything to share ?
Passed Successfully
May 27th, 2019
Hello. I passed my exam yesterday with 97x/1000 score..
Dump is very reliable and stable.
All questions was from dumps no need to learn more
Without Stars**
split.t*o/PGvmdeD
franledo
May 27th, 2019
NEW QUESTION 308
Which action can you take to prevent users from transferring external calls to external devices?
A. Enable the Block OffNet to OffNet Transfer feature in Cisco Unified Communications Manager.
B. Block the National route pattern.
C. Remove the route pattern to prevent inbound calls from matching the gateway.
D. Create a new translation pattern to block external call transfer.
Answer: A
NEW QUESTION 309
Which CLI command is used to troubleshoot ILS network connection issues within the local Cisco Unified CM cluster to determine which server within the cluster is the xnode?
A. utils ils lookup
B. utils ils showpeerinfo
C. utils ils display xnode
D. utils ils find xnode
Answer: D
PassedITeasy
May 27th, 2019
Pass it without any risk:
Save You Huge Exam Fee!!
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
REMOVE SPACES
rebrand . ly/ccnac9fa4
I made it today with 9xx/1000, everything here is valid.
I am now moving on to Next Exam.
Share latest examm Questions enjoy
Remove Stars***
https:/*/cut*t.ly/eyJG5q
Maria
May 30th, 2019
Passed too using Caroline dump
985/1000
Richard
May 31st, 2019
failed my exam using Caroline dump.
ExamPass
June 1st, 2019
If any one need sure dump please contact me at anoopitexamsatgmaildotcom
Isabella
June 2nd, 2019
Passed too today using Caroline dump
Victor Dellovo
June 3rd, 2019
Congratulations!!!
PASSED 210-060 and 210-065 in May/2019!!!
I mainly learned the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, still stable and valid enough for passing!
Recommend PassLeader dumps to you all!
Good Luck!
ben
June 3rd, 2019
passed exam 300-080 using spoto177 and got few new questions; can share it with you for $30 USD also passed 300-085 with a score of 9XX using spoto157 questions. 90% of the questions in the exam, just email benvaras2 at Gmail if interested, for $40, just need to recover cost getting this spoto. email at benvaras2 at Gmail
David
June 4th, 2019
someone has the latest spoto dumps 210-060 (202 Q) and 210-065 (174 Q)?? we can share cost.
mimo
June 5th, 2019
@VOIP VOIP @ franledo
can you guys share the dump 210-060 the 309Q? PLEASE
amoo9847— @ — gmail.com
Maria Del Patos
June 6th, 2019
Passeeed today (985/1000) using the following dump
my.syncplicity.com/share/qjxztrjadgnrnd0/210-060
pass(No spaces)hot dot com
June 6th, 2019
Hello, share latest exam questions
look my name
Videohelp
June 6th, 2019
@ALL , please anyone had passed 210-065 ?
Maria Del Patos
June 9th, 2019
Maria Del Patos mother fu**r fake
Maria Del Patos mother fu**r fake
Maria Del Patos mother fu**r fake
Don’t use Maria Del Patos mother fu**r fake Dumps
Elena Amieiro
June 10th, 2019
Congratulations!!!
PASSED 210-060 and 210-065 in May/2019!!!
I mainly learned the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, still stable and valid enough for passing!
Recommend PassLeader dumps to you all!
Good Luck!
+1
mimo
June 10th, 2019
@Elena
can you please share the 210-060 dump
amoo9847 at gmail
Videohelp
June 11th, 2019
@ALL Pay ATTENTION last date to take exam 24/02/2020
mimo
June 11th, 2019
Where can an engineer set the maximum message length in Cisco Unity Connection?
A message store settings
OB mailbox quotas
C class of service
D system call handlers
ans: C
A single end user reports that the message waiting indicator lamp on his 7945 IP phone does not light when messages arrive or upon incoming calls. Which fault domain should be investigated first?
A IP phone
B Cisco Unified Communications Manager Media Resources
C voice gateways
D network routers and switches
ans: A
Which directory number setting defines calling permissions?
A calling search space
B external phone mask
C associated devices
D route partition
ans: A
Which action can an engineer take to ensure that calling privileges are uniform for a user with a phone that has multiple lines?
A Enable Dependency Records for CSS.
B Configure Called Party Transformation CSS.
C Configure CSS on IP phone.
D Configure CSS on individual lines.
ans: C (not sure)
An engineer has updated the company dial plan and wants to get rid of unassigned numbers. Which action must be taken in Cisco Unified Communications Manager to accomplish this task?
A Delete unassigned DNS under Route Group.
B Delete unassigned DNS under Route Plan Report
C Delete unassigned DNS under Route Pattern.
D Delete unassigned DNS under Route List
ans: B
An engineer must run a CUCM report on the number of Iocal calls with poor voice quality. Which report type provides this information?
A QoS by Call Types report
B QoS by Gateway report
C QoS Detail report
D QOS Summary report
ans: D
Detail report gives you also types of calls but for individual calls not totals of numbers of the calls.
You are a network administrator tasked with configuring the device security for a single device. What is the result of you configuring the new device security mode in the phone configuration window of Cisco Unified Communications Manager?
A a rebuild of device configuration.exe file
B an automatic reboot of the entire duster
C an automatic connection to the security mode database
D rebuild of the device configuration.xml file
ans: D (not sure)
An engineer must generate a report of Cisco Unified Communications Manager usage for capacity planning. Where can this information be obtained within System reports?
A precedence call
B voice usage
C user usage
D traffic
ans: D
A system administrator needs to grant additional privileges to a single Cisco Unified Communications Manager user. How should the administrator accomplish this task?
A assign a new role to the user
B add the user to a new access control group
C assign an access control group to a new role
D add the user to a new role
ans: C
Cisco Unified Communications Manager clustering creates scalability in a network. Which administrative action increases performance in a Cisco Unified Comnunications Manager cluster?
A segregating processes to other machines
B providing multiple goints for remote administration
C enabling DSP process in the Cisco Unified Communications Manager GUI
D using only one endpoint to create redundancy
ans: D (not sure)
Which two configuration options are used to populate users in Cisco Unified Communications Manager? (Choose two.)
A system > enterprise parameters
Bsystem > LDAP > LDAP directory
C system > LDAP > LDAP system > LDAP synchronization
D system > LDAP > LDAP System
E user management > credential policy default
ans: B, D
Michel PASSET
June 12th, 2019
Congratulations!!!
PASSED 210-060 and 210-065 at the beginning of June/2019!!!
I mainly learned the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, still stable and valid enough for passing!
Recommend PassLeader dumps to you all!
Good Luck!
+1
+1
p.s.
Taking the 210-060/210-065 exams ASAP, these exams will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
Anonymous
June 12th, 2019
Where can an engineer set the maximum message length in Cisco Unity Connection?
A message store settings
OB mailbox quotas
C class of service
D system call handlers
ans: C
A single end user reports that the message waiting indicator lamp on his 7945 IP phone does not light when messages arrive or upon incoming calls. Which fault domain should be investigated first?
A IP phone
B Cisco Unified Communications Manager Media Resources
C voice gateways
D network routers and switches
ans: A
Which directory number setting defines calling permissions?
A calling search space
B external phone mask
C associated devices
D route partition
ans: A
Which action can an engineer take to ensure that calling privileges are uniform for a user with a phone that has multiple lines?
A Enable Dependency Records for CSS.
B Configure Called Party Transformation CSS.
C Configure CSS on IP phone.
D Configure CSS on individual lines.
ans: C (not sure)
An engineer has updated the company dial plan and wants to get rid of unassigned numbers. Which action must be taken in Cisco Unified Communications Manager to accomplish this task?
A Delete unassigned DNS under Route Group.
B Delete unassigned DNS under Route Plan Report
C Delete unassigned DNS under Route Pattern.
D Delete unassigned DNS under Route List
ans: B
An engineer must run a CUCM report on the number of Iocal calls with poor voice quality. Which report type provides this information?
A QoS by Call Types report
B QoS by Gateway report
C QoS Detail report
D QOS Summary report
ans: D
Detail report gives you also types of calls but for individual calls not totals of numbers of the calls.
You are a network administrator tasked with configuring the device security for a single device. What is the result of you configuring the new device security mode in the phone configuration window of Cisco Unified Communications Manager?
A a rebuild of device configuration.exe file
B an automatic reboot of the entire duster
C an automatic connection to the security mode database
D rebuild of the device configuration.xml file
ans: D (not sure)
An engineer must generate a report of Cisco Unified Communications Manager usage for capacity planning. Where can this information be obtained within System reports?
A precedence call
B voice usage
C user usage
D traffic
ans: D
A system administrator needs to grant additional privileges to a single Cisco Unified Communications Manager user. How should the administrator accomplish this task?
A assign a new role to the user
B add the user to a new access control group
C assign an access control group to a new role
D add the user to a new role
ans: C
Cisco Unified Communications Manager clustering creates scalability in a network. Which administrative action increases performance in a Cisco Unified Comnunications Manager cluster?
A segregating processes to other machines
B providing multiple goints for remote administration
C enabling DSP process in the Cisco Unified Communications Manager GUI
D using only one endpoint to create redundancy
ans: D (not sure)
Which two configuration options are used to populate users in Cisco Unified Communications Manager? (Choose two.)
A system > enterprise parameters
Bsystem > LDAP > LDAP directory
C system > LDAP > LDAP system > LDAP synchronization
D system > LDAP > LDAP System
E user management > credential policy default
ans: B, D
New Dumps File
June 12th, 2019
I made it today with 9xx/1000, everything here is valid.
I am now moving on to Next Exam.
Share latest examm Questions enjoy
Remove Stars***
https:/*/cut*t.ly/eyJG5q
Anonymous
June 12th, 2019
A single end user reports that the message waiting indicator lamp on his 7945 IP phone does not light when messages arrive or upon incoming calls. Which fault domain should be investigated first?
A IP phone
B Cisco Unified Communications Manager Media Resources
C voice gateways
D network routers and switches
ans: A
Which directory number setting defines calling permissions?
A calling search space
B external phone mask
C associated devices
D route partition
ans: A
mimo
June 12th, 2019
anyone can share the 309Q dump, please? amoo9847 at gmail.com (delete the space)
Anonymous
June 13th, 2019
Hi
Anyone can share the 210-065
mikeway87 at hotmail.com
Best regards,
Joe Gonzalez
June 17th, 2019
Congratulations!!!
PASSED 210-060 and 210-065 at the beginning of June/2019!!!
I mainly learned the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, still stable and valid enough for passing!
Recommend PassLeader dumps to you all!
Good Luck!
+1
+1
+1
p.s.
Taking the 210-060/210-065 exams ASAP, these exams will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
Anonymous
June 17th, 2019
P.S.
Part of PassLeader 210-060 dumps and 210-065 dumps are available here:
210-060 dumps:
bit.ly/210-060-dumps-online
(309q~~~NEW VERSION DUMPS)
210-065 dumps:
bit.ly/210-065-dumps-online
(412q~~~NEW VERSION DUMPS)
Good Luck!!!
RObert
June 17th, 2019
failed my exam using Caroline dump.
Nik
June 17th, 2019
guys please share valid 210-065
Thank You
June 19th, 2019
New Dumps File Thank You i download your file and today i passed the exam
Thank You again god bless you
Just Remove 2 Stars** get file
https:/*/eze*e.link/Q4ip0SG4xT
Anonymous
June 20th, 2019
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpascoints registered on borgth systems. Users finefd that video endpoints registered on Call manager can call each ovdthfaer and likewise for the endpoints
registered cson the VCS server. The administrator forvdf Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up aw neig3t4hbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP twqrunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: ACfq
Passed CICD 210-060
2nd time’s a charm!
All the questions on the exam were from this dump
https://static.atonline.net/private/c2lxVPs6phFxwA79Hz1p8oRLKU2-Z5muQdpdzE-EFSPoEHRHhVNdaDDycTWePlk9/210-060.pdf
The new PassLeader 210-065 dumps (April/2019 Updated) now are available, here are part of 210-065 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 401
An engineer must create a SIP trunk profile on Cisco Unified Communications Manager. Which menu navigation sequence accomplishes this task?
A. System > Service Parameters > SIP Trunk Security Profile
B. Device > Device Setting > SIP Trunk Security Profile
C. System > Security > SIP Trunk Security Profile
D. Device > Trunk
Answer: C
NEW QUESTION 402
Which feature enables the hosting of a multipoint conference locally on a Cisco TelePresence endpoint without the use of an external bridge?
A. multisite
B. MCU
C. multipoint
D. VCS
E. multiway
Answer: A
NEW QUESTION 403
A Cisco TelePresence EX90 endpoint is not registering successfully, and the endpoint IP address is not known. What is the proper method to obtain the current IP address of the device?
A. Reboot the device, and watch the screen for the IP address at system boot.
B. Use Telnet to connect to the MAC address of the device, and type “STATICA”.
C. Display the IP on the Cisco TelePresence EX90 screen by using the Cisco TelePresence Remote Control.
D. Connect a computer to the NIC on the Cisco TelePresence EX90, and enable DHCP.
E. Use the Cisco TelePresence Touch Control system menu.
Answer: E
NEW QUESTION 404
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?
A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
B. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.
C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
Answer: A
NEW QUESTION 405
An engineer wants to select a different camera layout to send to different users. Which video surveillance software component allows camera layouts?
A. Virtual Matrix
B. Operations Manager
C. Integrated Services Router
D. Media Server
Answer: A
NEW QUESTION 406
Which Cisco TelePresence system includes three cameras and a second row of seating for meeting participants?
A. TelePresence TX9000
B. Cisco TelePresence System 1300
C. Cisco TelePresence System 1100
D. Cisco TelePresence TX9200
Answer: D
NEW QUESTION 407
What are two characteristics of room acoustics regarding Cisco TelePresence Systems that should be avoided? (Choose two.)
A. low ambient SPL
B. high reverberation
C. ambient noise level 36dBA
E. NRC of .75
Answer: BD
NEW QUESTION 408
……
Get more NEW PassLeader 210-065 exam questions from here:
http://bit.ly/210-065-dumps-online
(412Q NEW VERSION DUMPS!!!)
Good Luck!!!
MORE:
MORE:
MORE:
MORE:
MORE:
Part of PassLeader 210-060 dumps FYI:
http://bit.ly/210-060-dumps-online
(309q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
Good Luck!!!
Good Luck!!!
Passed too today using the same dump
http://static.atonline.net/private/c2lxVPs6phFxwA79Hz1p8oRLKU2-Z5muQdpdzE-EFSPoEHRHhVNdaDDycTWePlk9/210-060.pdf
Hello Guys
any news for de 210-060 testing ? is the 309q dump still valid ?
Hey all, please share the new questions for who took the test 210 – 060 recently and advise if 309 passleader is enough to pass, good luck in advance ya’ll.
Hello evryone
i need a valid dumps CCID 210-060
thanks a lot
Ksbxb
A. System > Service Parameters > SIP Trunk Security Profile
B. Device > Device Sejsndtting > SIP Trunk Security Profile
C. System > Security > SIP Trunk Security Profile
D. Device > Trunk
Answer: C
NEW QUESTION 402
Which feature enables the hosting of a multipoint conference localbdbdndxbxbly on a Cisco TelePresence endpoint without the use of an external bridge?
A. multisite
B. MCU
C. multipoint
D. VCS
E. multiway
Answer: A
NEW QUESTION 403
A Cisco TelePresence EX90 endpoint is not registering successfully, and the endpoint IP address is not known. What is the proper method to obtain the current IP address of the device?
A. Reboot the device, and watch the screen for the IP address at system boot.
B. Use Telnet to connect to the MAC address of the device, and type “STATICA”.
C. Display the IP on the Cisco TelePresence EX90 screen by using the Cisco TelePresence Remote Control.
D. Connect a computer to the NIC on the Cisco TelePresence EX90, and enable DHCP.
E. Use the Cisco TelePresence Touch Control system menu.
Answer: E
NEW QUESTION 404
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?
A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
B. Hold the munznxte button down for 20 seconds while you power on the Touch 8 controller.
C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
Answer: A
NEW QUESTION 405
An engineer wants to select a different camera layout to send to different users. Which video surveillance software component allows camera layouts?
A. Virtual Matrix
B. Operations Manager
C. Integrated Services Router
D. Media Server
Answer: A
NEW QUESTION 406
Which Cisco TelePresence system includes three cameras and a second row of seating for meeting participants?
A. TelePresence TX9000
B. Cisco TelePresence System 1300
C. Cisco TelePresejdbxnce System 1100
D. Cisco TelePresence TX9200
Answer: D
NEW QUESTION 407
What are two characteristics of room acoustics regarding Cisco TelePresence Systems that should be avoided? (Choose two.)
A. low ambient SPL
B. high revernsbzberation
C. ambient noise level 36dBA
E. NRC of .75
Passed Today (985/1000)
All the questions were from this dump
https://drive.google.com/open?id=1EWcOE6-_5grfYiT1O0iPs3KdQdzzjPGV
NEW QUESTION 405
An engineer wants to select a different camera layout to send to different users. Which video surveillance software component allows camera layouts?
A. Virtual Matrix
B. Operations Manager
C. Integrated Services Router
D. Media Server
Answer: A
NEW QUESTION 406
Which Cisco TelePresence system includes three cameras and a second row of seating for meeting participants?
A. TelePresence TX9000
B. Cisco TelePresence System 1300
C. Cisco TelePrejhsejdbxnce System 1100
D. Cisco TelePresence TX9200
Answer: D
210-060 there are from 10 to 15 new question on the exam, dont trust the 309q dumps out there because none of them have the questions, if you plan to do the test soon my advice is to reschedule until we find the new questions
Passed too today using the same dump posted by Emma
https://www.flipsnack.com/Ikikay2/210-060.html
Elizabeth is fake/////
@failed, sorry to hear that, and thanks for sharing your experience.. could you share some of what you remember of the new questions?
@VOIP_VOIP
I remember only about a question asking how to extract phone reports using CUCM, but it was not using route plan report.. and another question asking about IM and presence what they stand for and I think there was a answer IM chat.. the rest I don’t remember, I just know that I never saw those question in here or any dump out there.
Hi! All!!!
Finally PASSED 210-060 and 210-065 recently!!!
I used the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, valid enough for passing now!
Good Luck!
P.S.
Part of PassLeader 210-060 dumps and 210-065 dumps are available here:
210-060 dumps:
http://bit.ly/210-060-dumps-online
(309q~~~NEW VERSION DUMPS)
210-065 dumps:
http://bit.ly/210-065-dumps-online
(412q~~~NEW VERSION DUMPS)
Good Luck!!!
2 of my students passed too today using the same dump
https://app.box.com/s/8vpec0434rjp631nb8xik0u1wcqbvhvp
Anyone passed 210-065 recently
Ebrahem is fake fake
hello, anyone that tested Vceplus can confirm if 383q for 210-060 is valid ?
@Failed
Can you share your dump for 210-060
My email : pxtrinh99 @ gmail . com
Tks very much !
I am looking for dumps 210-060.
how do i buy it
Thank you
Thanks for sharing!
Luckily passed the 210-060/210-065 exam recently.
Questions are all available in that new PassLeader 210-060/210-065 dumps, just few answers are not same as the actual 210-060/210-065 test.
Thanks for updated PassLeader 210-060/210-065 dumps, helpful!
Good luck, all!
Recently passed exam 300-080 using latest spoto177 dated Apr/19 (mht file) and got 2 new questions more; trying to recover cost. If you want to share it with, i can offer it at 30 USD, email me at benvaras2 at Gmail com
C. System > Security > SIP Trunk Security Profile
D. Device > Trunk
Answer: C
NEW QUESTION 402
Which feature enables the hosting of a multipoint conference localbdbdndxbxbly on a Cisco TelePresence endpoint without the use of an external bridge?
A. multisite
B. MCU
C. multipoint
D. VCS
E. multiway
Answer: A
NEW QUESTION 403
A Cisco TelePresence EX90 endpoint is not registering successfully, and the endpoint IP address is not known. What is the proper method to obtain the current IP address of the device?
A. Reboot the device, and watch the screen for the IP address at system boot.
B. Use Telnet to connect to the MAC address of the device, and type “STATICA”.
C. Display the IP on the Cisco TelePresence EX90 screen by using the Cisco TelePresence Remote Control.
D. Connect a computer to the NIC on the Cisco TelePresence EX90, and enable DHCP.
E. Use the Cisco TelePresence Touch Control system menu.
Answer: E
NEW QUESTION 404
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?
A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
B. Hold the munznxte button down for 20 seconds while you power on the Touch 8 controller.
C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
Answer: A
NEW QUESTION 405
An engineer wants to select a different camera layout to send to different users. Which video surveillance software component allows camera layouts?
A. Virtual Matrix
B. Operations Manager
C. Integrated Services Router
D. Media Server
Answer: A
NEW QUESTION 406
Which Cisco TelePresence system includes three cameras and a second row of seating for meeting participants?
A. TelePresence TX9000
B. Cisco TelePresence System 1300
C. Cisco TelePresejdbxnce System 1100
D. Cisco TelePresence TX9200
Answer: D
NEW QUESTION 407
What are two characteristics of room acoustics regarding Cisco TelePresence Systems that should be avoided? (Choose two.)
A. low ambient SPL
B. high revernsbzberation
C. ambient noise level 36dBA
E. NRC of .75
Hello,
I passed the exam today (985/1000)
All the questions were from this dump (Updated this month with the new questions)
https://drive.google.com/open?id=1m563xSJH8DfBkrQIhNm4KhCsj4bhAyN5
Which directory number setting defines calling permissions?
A calling search space
B external phone mask
C associated devices
D route partition
A
Which action can an engineer take to ensure that calling privileges are uniform for a user with a phone that has multiple lines?
A Enable Dependency Records for CSS.
B Configure Called Party Transformation CSS.
C Configure CSS on IP phone.
D Configure CSS on individual lines.
D
An engineer has updated the company dial plan and wants to get rid of unassigned numbers. Which action must be taken in Cisco Unified Communications Manager to accomplish this task?
A Delete unassigned DNS under Route Group.
B Delete unassigned DNS under Route Plan Report
C Delete unassigned DNS under Route Pattern.
D Delete unassigned DNS under Route List
B
hi，guys valid dumps，look my name
Hello,
I passed the exam today (985/1000)
All the questions were from this dump (Updated this month with the new questions)
https://emagcreator.com/ikki/210117060/?trial
Thanks for sharing!
Luckily passed the 210-060/210-065 exam recently.
Questions are all available in that new PassLeader 210-060/210-065 dumps, just few answers are not same as the actual 210-060/210-065 test.
Thanks for updated PassLeader 210-060/210-065 dumps, helpful!
Good luck, all!
+1
Ebrahem IS FAKE FAKE FAKE ..
Ebrahem IS FAKE FAKE FAKE ..
DON’T USE Ebrahem FAKE FAKE FAKE DUMPS
Hello Guys,
share exam questions
pass hot dot com
passleader 309q or passleadervce 382q?
Can you share your dump for 210-060
My email : mikeway87@ hotmail . com
Thanks very much !
kindly to share dump for 210-060 for me
this my email : enjoyhostpot @ gmail . com
Thanks you very much !
Any one share the latest dumps.
@failed, the last update of Vceplus 383, from what I see the last 83 is only about Video or Camera not sure if this really part of 210-060 exam or they just mix it up, cuz none of these question on the cisco voice part subject. but I just going to study them who nows LOL.
@VOIP_VOIP, Yesterday i did the test 210-060, and passed 914, the was a lot of questions that it is not on the dump like 15 but they are not hard, the rest was on the dump, with diferente texting and some differnt answers, it includes some CME, jabber and general CUCM, they are not tricky, if you studied the content you should find the correct answer easily. No vídeo at all questions, no drag and drop, no jabber tshoot questions. there was only straight and forward questions, or select 2 right answers and that’s it. i wish you good luck, maybe you are right maybe the 300 to 383 is for the 210-065… thanks all
@faild, that is the most great news I have heard for today congrats! I scheduled my exam for Monday, thanks a lot for sharing!
{email not allowed}—Prepping for 210-060—2 Mondays from now. Will share my experience as I go. Thanks.
@failed Congrats !!!! have you planned the next exam 210-065 ?
@ALL please share exam experience !!!!!!! anyone have passed 210-065 recently ?
THX
Guys what is the correct answer for this question?
QUESTION 302
Two IP phones configured in the same office have a phone call in progress when the Call Manager they are registered to fails. Which result is true?
A.The call remains active, and the Cisco IP Phones enable SIP proxy mode for RTP
B.The call is immediately disconnected
C.The call remains active but features such as MOH and Transfer are unavailable for the rest of the call
D.The call disconnects after the RTP/RTCP keepalive between the IP phones and Call Manager fails.
@VOIP_VOIP
Can you share your dump for 210-060
My email : pxtrinh99 @ gmail . com
Tks very much !
@Kyle Stevens
Congratulations!!!
Would you like to share that PassLeader 210-060/210-065 dumps (new version) with VCE or PDF file?
Thanks in advance!!!
Passed my Exam successfully..
https://drive.google.com/open?id=1E7lAgK_dCTW_82tQ5YJL-Wlsah78o9Dl
All questions was from dumps no need to learn more
My Marks: 9xx/1000
NEW QUESTION 404
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?
A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
B. Hold the munznxte button down for 20 seconds while you power on the Touch 8 controller.
C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
Answer: A
Hey all, I passed the exam today with 9XX, most of the questions were from passLeader 309 Q. It was not that hard. I will share some of the new questions I that I got shortly and I will also share the dumps here so it will be available for everyone. Thanks all whom share their experience.
@VOIP_VOIP i told you man =P congratz for passing too on this test lets go to 210-065 now hahaha
Passed too using the same dump
emagcreator.com/ikki/210117060/?trial
Hi VoIP,
Can you share the new questions and the dumps pls
I going to take the 210-060 exam tomorrow
mikeway87 @ hotmail.com
Best regards,
Guys what is the correct answer for this question?
QUESTION 302
Two IP phones configured in the same office have a phone call in progress when the Call Manager they are registered to fails. Which result is true?
A.The call remains active, and the Cisco IP Phones enable SIP proxy mode for RTP
B.The call is immediately disconnected
C.The call remains active but features such as MOH and Transfer are unavailable for the rest of the call
D.The call disconnects after the RTP/RTCP keepalive between the IP phones and Call Manager fails.
Answer:C
Share latest Update exam question
http:/*/u6.g*g/sAu9r
@Failed, yea man you were absolutely right, if you understand the concept the question are so easy, thanks again. See you in 210-065 LOL…
Hello, VOIP_VOIP, congradulation! We’ll be waiting for your dumps. Please upload them when you will be able to! Thank you!
Hello
I buy the dump spoto (dumps 210-060) that interest to share the price with me.
yhanks
@VOIP_VOIP @Failed
I’m studying too for 210.065! Keep in touch !
I cleared my exam today with a good mark
my.pcloud.com/publink/show?code=XZIE3I7ZUkepPdMp2yjc9hAkQDri60CvNuCk
passed exam 300-080(spoto177) and 300-085(spoto157) and got new questions; trying to recover cost. If you want to share it with, can offer it for a price, email me at benvaras2 at Gmail com
Please
Share
Please share.
Please share 210-060/210-065.
Please share 210-060/210-065 dumps.
Thanks!
Congratulations!!!
Finally PASSED 210-060 and 210-065 recently!!!
I used the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, valid enough for passing now!
Good Luck!
P.S.
Part of PassLeader 210-060 dumps and 210-065 dumps are available here:
210-060 dumps:
bit.ly/210-060-dumps-online
(309q~~~NEW VERSION DUMPS)
210-065 dumps:
bit.ly/210-065-dumps-online
(412q~~~NEW VERSION DUMPS)
Good Luck!!!
@VOIP_VOIP / @Voicehelp
I did not started the 210-065 yet, i was enjoying my free time these days but now i want to start the 210-065 study, where do you recommend to start the material ? Do you guys have anything to share ?
Hello. I passed my exam yesterday with 97x/1000 score..
Dump is very reliable and stable.
All questions was from dumps no need to learn more
Without Stars**
split.t*o/PGvmdeD
NEW QUESTION 308
Which action can you take to prevent users from transferring external calls to external devices?
A. Enable the Block OffNet to OffNet Transfer feature in Cisco Unified Communications Manager.
B. Block the National route pattern.
C. Remove the route pattern to prevent inbound calls from matching the gateway.
D. Create a new translation pattern to block external call transfer.
Answer: A
NEW QUESTION 309
Which CLI command is used to troubleshoot ILS network connection issues within the local Cisco Unified CM cluster to determine which server within the cluster is the xnode?
A. utils ils lookup
B. utils ils showpeerinfo
C. utils ils display xnode
D. utils ils find xnode
Answer: D
Pass it without any risk:
Save You Huge Exam Fee!!
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
REMOVE SPACES
rebrand . ly/ccnac9fa4
Passed using the same dump posted on the page 89
my.pcloud.com/publink/show?code=XZIE3I7ZUkepPdMp2yjc9hAkQDri60CvNuCk
I made it today with 9xx/1000, everything here is valid.
I am now moving on to Next Exam.
Share latest examm Questions enjoy
Remove Stars***
https:/*/cut*t.ly/eyJG5q
Passed too using Caroline dump
985/1000
failed my exam using Caroline dump.
If any one need sure dump please contact me at anoopitexamsatgmaildotcom
Passed too today using Caroline dump
Congratulations!!!
PASSED 210-060 and 210-065 in May/2019!!!
I mainly learned the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, still stable and valid enough for passing!
Recommend PassLeader dumps to you all!
Good Luck!
passed exam 300-080 using spoto177 and got few new questions; can share it with you for $30 USD also passed 300-085 with a score of 9XX using spoto157 questions. 90% of the questions in the exam, just email benvaras2 at Gmail if interested, for $40, just need to recover cost getting this spoto. email at benvaras2 at Gmail
someone has the latest spoto dumps 210-060 (202 Q) and 210-065 (174 Q)?? we can share cost.
@VOIP VOIP @ franledo
can you guys share the dump 210-060 the 309Q? PLEASE
amoo9847— @ — gmail.com
Passeeed today (985/1000) using the following dump
my.syncplicity.com/share/qjxztrjadgnrnd0/210-060
Hello, share latest exam questions
look my name
@ALL , please anyone had passed 210-065 ?
Maria Del Patos mother fu**r fake
Maria Del Patos mother fu**r fake
Maria Del Patos mother fu**r fake
Don’t use Maria Del Patos mother fu**r fake Dumps
Congratulations!!!
PASSED 210-060 and 210-065 in May/2019!!!
I mainly learned the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, still stable and valid enough for passing!
Recommend PassLeader dumps to you all!
Good Luck!
+1
@Elena
can you please share the 210-060 dump
amoo9847 at gmail
@ALL Pay ATTENTION last date to take exam 24/02/2020
Where can an engineer set the maximum message length in Cisco Unity Connection?
A message store settings
OB mailbox quotas
C class of service
D system call handlers
ans: C
A single end user reports that the message waiting indicator lamp on his 7945 IP phone does not light when messages arrive or upon incoming calls. Which fault domain should be investigated first?
A IP phone
B Cisco Unified Communications Manager Media Resources
C voice gateways
D network routers and switches
ans: A
Which directory number setting defines calling permissions?
A calling search space
B external phone mask
C associated devices
D route partition
ans: A
Which action can an engineer take to ensure that calling privileges are uniform for a user with a phone that has multiple lines?
A Enable Dependency Records for CSS.
B Configure Called Party Transformation CSS.
C Configure CSS on IP phone.
D Configure CSS on individual lines.
ans: C (not sure)
An engineer has updated the company dial plan and wants to get rid of unassigned numbers. Which action must be taken in Cisco Unified Communications Manager to accomplish this task?
A Delete unassigned DNS under Route Group.
B Delete unassigned DNS under Route Plan Report
C Delete unassigned DNS under Route Pattern.
D Delete unassigned DNS under Route List
ans: B
An engineer must run a CUCM report on the number of Iocal calls with poor voice quality. Which report type provides this information?
A QoS by Call Types report
B QoS by Gateway report
C QoS Detail report
D QOS Summary report
ans: D
Detail report gives you also types of calls but for individual calls not totals of numbers of the calls.
You are a network administrator tasked with configuring the device security for a single device. What is the result of you configuring the new device security mode in the phone configuration window of Cisco Unified Communications Manager?
A a rebuild of device configuration.exe file
B an automatic reboot of the entire duster
C an automatic connection to the security mode database
D rebuild of the device configuration.xml file
ans: D (not sure)
An engineer must generate a report of Cisco Unified Communications Manager usage for capacity planning. Where can this information be obtained within System reports?
A precedence call
B voice usage
C user usage
D traffic
ans: D
A system administrator needs to grant additional privileges to a single Cisco Unified Communications Manager user. How should the administrator accomplish this task?
A assign a new role to the user
B add the user to a new access control group
C assign an access control group to a new role
D add the user to a new role
ans: C
Cisco Unified Communications Manager clustering creates scalability in a network. Which administrative action increases performance in a Cisco Unified Comnunications Manager cluster?
A segregating processes to other machines
B providing multiple goints for remote administration
C enabling DSP process in the Cisco Unified Communications Manager GUI
D using only one endpoint to create redundancy
ans: D (not sure)
Which two configuration options are used to populate users in Cisco Unified Communications Manager? (Choose two.)
A system > enterprise parameters
Bsystem > LDAP > LDAP directory
C system > LDAP > LDAP system > LDAP synchronization
D system > LDAP > LDAP System
E user management > credential policy default
ans: B, D
Congratulations!!!
PASSED 210-060 and 210-065 at the beginning of June/2019!!!
I mainly learned the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, still stable and valid enough for passing!
Recommend PassLeader dumps to you all!
Good Luck!
+1
+1
p.s.
Taking the 210-060/210-065 exams ASAP, these exams will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
Where can an engineer set the maximum message length in Cisco Unity Connection?
A message store settings
OB mailbox quotas
C class of service
D system call handlers
ans: C
A single end user reports that the message waiting indicator lamp on his 7945 IP phone does not light when messages arrive or upon incoming calls. Which fault domain should be investigated first?
A IP phone
B Cisco Unified Communications Manager Media Resources
C voice gateways
D network routers and switches
ans: A
Which directory number setting defines calling permissions?
A calling search space
B external phone mask
C associated devices
D route partition
ans: A
Which action can an engineer take to ensure that calling privileges are uniform for a user with a phone that has multiple lines?
A Enable Dependency Records for CSS.
B Configure Called Party Transformation CSS.
C Configure CSS on IP phone.
D Configure CSS on individual lines.
ans: C (not sure)
An engineer has updated the company dial plan and wants to get rid of unassigned numbers. Which action must be taken in Cisco Unified Communications Manager to accomplish this task?
A Delete unassigned DNS under Route Group.
B Delete unassigned DNS under Route Plan Report
C Delete unassigned DNS under Route Pattern.
D Delete unassigned DNS under Route List
ans: B
An engineer must run a CUCM report on the number of Iocal calls with poor voice quality. Which report type provides this information?
A QoS by Call Types report
B QoS by Gateway report
C QoS Detail report
D QOS Summary report
ans: D
Detail report gives you also types of calls but for individual calls not totals of numbers of the calls.
You are a network administrator tasked with configuring the device security for a single device. What is the result of you configuring the new device security mode in the phone configuration window of Cisco Unified Communications Manager?
A a rebuild of device configuration.exe file
B an automatic reboot of the entire duster
C an automatic connection to the security mode database
D rebuild of the device configuration.xml file
ans: D (not sure)
An engineer must generate a report of Cisco Unified Communications Manager usage for capacity planning. Where can this information be obtained within System reports?
A precedence call
B voice usage
C user usage
D traffic
ans: D
A system administrator needs to grant additional privileges to a single Cisco Unified Communications Manager user. How should the administrator accomplish this task?
A assign a new role to the user
B add the user to a new access control group
C assign an access control group to a new role
D add the user to a new role
ans: C
Cisco Unified Communications Manager clustering creates scalability in a network. Which administrative action increases performance in a Cisco Unified Comnunications Manager cluster?
A segregating processes to other machines
B providing multiple goints for remote administration
C enabling DSP process in the Cisco Unified Communications Manager GUI
D using only one endpoint to create redundancy
ans: D (not sure)
Which two configuration options are used to populate users in Cisco Unified Communications Manager? (Choose two.)
A system > enterprise parameters
Bsystem > LDAP > LDAP directory
C system > LDAP > LDAP system > LDAP synchronization
D system > LDAP > LDAP System
E user management > credential policy default
ans: B, D
I made it today with 9xx/1000, everything here is valid.
I am now moving on to Next Exam.
Share latest examm Questions enjoy
Remove Stars***
https:/*/cut*t.ly/eyJG5q
A single end user reports that the message waiting indicator lamp on his 7945 IP phone does not light when messages arrive or upon incoming calls. Which fault domain should be investigated first?
A IP phone
B Cisco Unified Communications Manager Media Resources
C voice gateways
D network routers and switches
ans: A
Which directory number setting defines calling permissions?
A calling search space
B external phone mask
C associated devices
D route partition
ans: A
anyone can share the 309Q dump, please? amoo9847 at gmail.com (delete the space)
Hi
Anyone can share the 210-065
mikeway87 at hotmail.com
Best regards,
Congratulations!!!
PASSED 210-060 and 210-065 at the beginning of June/2019!!!
I mainly learned the NEW version PassLeader 210-060 (309q~~~NEW VERSION DUMPS) and 210-065 (412q~~~NEW VERSION DUMPS) dumps, still stable and valid enough for passing!
Recommend PassLeader dumps to you all!
Good Luck!
+1
+1
+1
p.s.
Taking the 210-060/210-065 exams ASAP, these exams will retire in Feb/2020!!!
Referring to — Next Level Certifications — from the official website.
Good luck!
P.S.
Part of PassLeader 210-060 dumps and 210-065 dumps are available here:
210-060 dumps:
bit.ly/210-060-dumps-online
(309q~~~NEW VERSION DUMPS)
210-065 dumps:
bit.ly/210-065-dumps-online
(412q~~~NEW VERSION DUMPS)
Good Luck!!!
failed my exam using Caroline dump.
guys please share valid 210-065
New Dumps File Thank You i download your file and today i passed the exam
Thank You again god bless you
Just Remove 2 Stars** get file
https:/*/eze*e.link/Q4ip0SG4xT
NEW QUESTION 176
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpascoints registered on borgth systems. Users finefd that video endpoints registered on Call manager can call each ovdthfaer and likewise for the endpoints
registered cson the VCS server. The administrator forvdf Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other
video endpoint. Which two steps must the administrator take to add the
SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up aw neig3t4hbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP twqrunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: ACfq
@Voicehelp @VOIP_VOIP
guys need help for valid 210-065 please share!