Anybody giving exam next week ? 300-089 ?? Pls let me know .
Sandy
January 11th, 2018
300-080 i mean , I m giving next week Friday , pls let me know if anyone giving exam
robert
January 11th, 2018
@Sandy the questions are above, please help to answer them
Tony Gunz
January 11th, 2018
Some of the questions I previously posted have been resolved. Blow is my revised list of questions, any help would be grateful since these are current test questions
1. (45) An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one. Which statement can be the cause of this issue?
a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
2. (70) Refer to the exhibit. A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit. The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unavailable (23)”. Which configuration requirement supports Cisco EMCC and avoids this error condition? http://172.16.1.1:8080/emapp/EMAppServlet?device=#DEVICENAME#%EMCC=#EMCC#
a. The user must associate a device profile
b. The Cisco IP Phone Service Configuration for Cisco EMCC must set the enterprise subscription
c. The given user ID is not found in the remote cluster
d. The device must be subscribed to Cisco EMCC Services
3. (33) You are troubleshooting an intersite call between two endpoints where calls are intermittently failing with the error message “488 Not Acceptable Media”. Which option causes this error message to trigger?
a. The device pool contains more call processing agents in the CMO group than the endpoint can support
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support
d. MRGL contains more media groups than the endpoint can support
4. (26) You are troubleshooting support for g711alaw between two different sites. The current configuration is as follows:
Dspfarm profile 1 transcode
Codec g711ulaw
Codec g729ar8
Codec g729abr8
Codec g729br8
Codec g729r8
Maximum sessions 4
Associate application SCCP
Which two steps do you need to take in order to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command
5. (24) …configuration of Intercluster Lookup service, this command is used to look up the URI of a remote cluster user…
… … lookup {email not allowed}
…ing string is cucm1 cisco.com
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of the remote cluster user?
a. SIP route pattern for domain * acme.com
b. End user with directory URI {email not allowed}
c. SIP trunk with destination cucm1 cisco.com
d. SIP route pattern for domain * cisco.com
6. (17) … a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. Both sites use their local … At the headquarters site, the PSTN prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is … and the emergency number is 112. Here are the deployment policies for roaming devices?
• The phones can roam between two sites
• A roaming softphone uses the local gateway for all PSTN calls
• The user keeps home and dial habits on a roaming softphone, with the exception of the emergency number
When a headquarters user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work. Which setting on CUCM should be checked?
a. DHCP subnet
b. Device Mobility info
c. Device Mobility Group
d. Physical Location
Tony Gunz
January 11th, 2018
for question 5, the sample email was blocked, it is: user1 @ acme . com
shady
January 11th, 2018
@sandy
yes i m’preparing to take exam too.
my email:Shady.mahmoud992 at gmail . com
robert
January 12th, 2018
4. (26) You are troubleshooting support for g711alaw between two different sites. The current configuration is as follows:
Dspfarm profile 1 transcode
Codec g711ulaw
Codec g729ar8
Codec g729abr8
Codec g729br8
Codec g729r8
Maximum sessions 4
Associate application SCCP
Which two steps do you need to take in order to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile ******
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command *****
please share the ones that you have solved
Reoni
January 12th, 2018
Which two Cisco Unified Communications Manager operations will test reverse DNS lookup? (Choose two)
o Reboot
o Upgrade
o Installation
o Changing IP address or hostname
o Switch version
cyberknock
January 12th, 2018
4. (26) You are troubleshooting support for g711alaw between two different sites. The current configuration is as follows:
Dspfarm profile 1 transcode
Codec g711ulaw
Codec g729ar8
Codec g729abr8
Codec g729br8
Codec g729r8
Maximum sessions 4
Associate application SCCP
Which two steps do you need to take in order to add support for this codec? (Choose two)
Xa. Issue the command shutdown under the dspfarm profile ******
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
Xe. Add the command codec g711alaw and issue the no shutdown command *****
Which two Cisco Unified Communications Manager operations will test reverse DNS lookup? (Choose two)
o Reboot
o Upgrade
X Installation
x Changing IP address or hostname
o Switch version
George Looney
January 14th, 2018
anyone having lead2pass 248 dumps, pl share. i have exam next weekend. Then i can also here share my experience. Thanks
cyberknock
January 14th, 2018
@Tony
3. (33) You are troubleshooting an intersite call between two endpoints where calls are intermittently failing with the error message “488 Not Acceptable Media”. Which option causes this error message to trigger?
a. The device pool contains more call processing agents in the CMO group than the endpoint can support
b. The hunt group contains more devices than the endpoint can support
X c. A lower bandwidth is set in the region than the endpoint can support
d. MRGL contains more media groups than the endpoint can support
shady
January 14th, 2018
@george looney
please send me on this mail
shady.mahmoud992 at gmail .com
as i ‘m taking the exam too.
hey all ,,,,,,,,,,,,,,,,,,,,,,,
it seem that no one have the passlead dump 248 which is the most accurate these days
so if any on going to take exam soon .
please send me a mail on shady.mahmoud992 at gmail dot com
as we can buy the passlead dumps and studying these new question and i think we will pass .
as this secinario is hapening every exam .
also i making a wats group for studying and explain question
if any one is interested please join us as we now 4 .
thank you
Roy
January 14th, 2018
@shandy, are you want to buy 248 dump?
please count me in
Shady
January 14th, 2018
@roy plz send me on mail so i can get you and buy the dump
Also as ì menthoned i make wats group for exam prepartion
I used PassLeader 300-080 dumps (248q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-080 dumps are available here FYI:
70. Refer to the URL. A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit. The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”. Which configuration requirement supports Cisco EMCC and avoids this error condition?
a. The user must associate a device profile
b. The Cisco IP Phone Service Configuration for Cisco EMCC must set the enterprise subscription
c. The given user ID is not found in the remote cluster
d. The device must be subscribed to Cisco EMCC Services
45. An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one. Which statement can cause of this issue?
a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
45. An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one. Which statement can cause of this issue?
X a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
Must be A
Here from the TS Conductor Admin Guide:
It is possible to use the TelePresence Conductor without a release key, as TelePresence Conductor Essentials. This
results in limited system capacity. The limitations are:
■ The TelePresence Conductor cannot be part of a cluster.
■ Only one standalone conference bridge across all conference bridge pools can be enabled at a time
Lyla
January 17th, 2018
Users in your enterprise can establish PSTN calls, but users notice that when they attempt to perform a transfer the call fails. Which two actions must you take to troubleshoot the problem? (Choose two.)
A. Verify that media resources are assigned to the transcoder.
B. Verify that MTP resources are registered with Cisco Unified Communications Manager.
C. Use RTMT Performance monitoring to verify that an MTP device is available to support supplementary services.
D. Restart the Cisco Serviceability tool.
E. Restart Cisco Unified Communications Manager services.
cyberknock
January 17th, 2018
Users in your enterprise can establish PSTN calls, but users notice that when they attempt to perform a transfer the call fails. Which two actions must you take to troubleshoot the problem? (Choose two.)
A. Verify that media resources are assigned to the transcoder.
B. Verify that MTP resources are registered with Cisco Unified Communications Manager.
C. Use RTMT Performance monitoring to verify that an MTP device is available to support supplementary services.
D. Restart the Cisco Serviceability tool.
E. Restart Cisco Unified Communications Manager services.
BC as the main issue are supplementary services
Lyla
January 17th, 2018
thank @cyber
could you help me with this one
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was not activated.
d An H.323 SAF trunk was configured instead of a SIP SAF trunk
e CCD advertising service was not activated.
ccie-dump
January 18th, 2018
update dumps
freeciscodumps dot com
Tony Gunz
January 18th, 2018
@Lyla
I have:
Incorrect user credentials were used on the SAF Forwarder
CCD Requesting service was not activated
Tony Gunz
January 18th, 2018
@Cyberknock, Thank you
cyberknock
January 18th, 2018
@Lyla Tony’s answers are correct
Lyla
January 18th, 2018
thanks guys,
One of your sales executives is unable to complete long-distance calls. The trouble ticket indicates that the user is dialing telephone numbers in 1 + 10 digit format. Which two actions can you take to correct the problem? (Choose two).
A. Correct the end user´s phone calling search space and partition to allow long distance calls.
B. Create a new globalized route pattern for the user.
C. Check if the phone is assigned to the end user page.
D. Set the route pattern to OnNet.
E. Verify that the user is entering the correct access code for PSTN access before dialing the telephone number.
An engineer has a SIP trunk configured between Cisco Unified Communications Manager (CUCM) and a Cisco VCS cluster. When a call is made from a Cisco TelePresence System EX60 that is registered to the Cisco VCS to a Cisco IP Phone 9971 that is registered to CUCM, it rings. But upon picking up the call, a busy tone is heard. What should be checked to resolve this issue?
o SIP trunk registration
o CUCM zone on the Cisco VCS
o SIP trunk and phone region settings
o Authentication on the SIP trunk
0In this CUCM dial-plan, a localized translation pattern 9.1[2-9]XX[2-9]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. This Translation Pattern is used to globalize the User´s dialed digits followed by matching a \+! Route Pattern as seen in the Exhibit. Users with devices/Lines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678309 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
A. Route Pattern does not have “Urgent Priority” checked
B. Route Pattern does not have “Allow Overlap Sending” checked
C. Translation Pattern does not have “Urgent Priority” checked
D. Router Pattern Call Classification set to Offnet
E. Translation Pattern has “Provide Outside Dial Tone” checked.
Lyla
January 18th, 2018
Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
o Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”
cyberknock
January 19th, 2018
An engineer has a SIP trunk configured between Cisco Unified Communications Manager (CUCM) and a Cisco VCS cluster. When a call is made from a Cisco TelePresence System EX60 that is registered to the Cisco VCS to a Cisco IP Phone 9971 that is registered to CUCM, it rings. But upon picking up the call, a busy tone is heard. What should be checked to resolve this issue?
o SIP trunk registration
o CUCM zone on the Cisco VCS
X SIP trunk and phone region settings
o Authentication on the SIP trunk
If signaling is ok then the issue have to be codec related -> regions
In this CUCM dial-plan, a localized translation pattern 9.1[2-9]XX[2-9]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. This Translation Pattern is used to globalize the User´s dialed digits followed by matching a \+! Route Pattern as seen in the Exhibit. Users with devices/Lines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678309 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
A. Route Pattern does not have “Urgent Priority” checked
B. Route Pattern does not have “Allow Overlap Sending” checked
C. Translation Pattern does not have “Urgent Priority” checked
D. Router Pattern Call Classification set to Offnet
E. Translation Pattern has “Provide Outside Dial Tone” checked.
They want to know if you are familar with urgent priority -> AC
Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
x Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”
cyberknock
January 19th, 2018
Stop the last one is not correct, there is no 2XX Expiry Timer in SIP Profile.
Timer Register Delta
(seconds)
Use this parameter in conjunction with the Timer Register Expires setting.
The phone reregisters Timer Register Delta seconds before the registration
period ends. The registration period gets determined by the value of the SIP
Station KeepAlive Interval service parameter. Valid values range from 32767
to 0. Default specifies 5.
In my opinion it should be this timer, because the Station Keepalive Interval is as he name says a keepalive timer, but from the question the client fails to register.
So my answer would be B.
cyberknock
January 19th, 2018
i have also the info from my CCIE teammates that the station interval timer only have effect on skinny devices
Lyla
January 19th, 2018
@cyberknock thank you very much
what do you think onthis
One of your sales executives is unable to complete long-distance calls. The trouble ticket indicates that the user is dialing telephone numbers in 1 + 10 digit format. Which two actions can you take to correct the problem? (Choose two).
A. Correct the end user´s phone calling search space and partition to allow long distance calls.
B. Create a new globalized route pattern for the user.
C. Check if the phone is assigned to the end user page.
D. Set the route pattern to OnNet.
E. Verify that the user is entering the correct access code for PSTN access before dialing the telephone number.
Sandy
January 19th, 2018
I am going to buy 300-080 latest dump, the persons who want to give exams can write me email and we can share our questions in exam and can help each other .
er_sandeepsuman@ rediffmail.com
cyberknock
January 19th, 2018
One of your sales executives is unable to complete long-distance calls. The trouble ticket indicates that the user is dialing telephone numbers in 1 + 10 digit format. Which two actions can you take to correct the problem? (Choose two).
A. Correct the end user´s phone calling search space and partition to allow long distance calls.
B. Create a new globalized route pattern for the user.
C. Check if the phone is assigned to the end user page.
D. Set the route pattern to OnNet.
E. Verify that the user is entering the correct access code for PSTN access before dialing the telephone number.
This is really funny, in my 248q dump there is only one option to choose, in my opinion the question in your example is wrong because only one option make sense.
Only option E makes sense …
In my dump the question is:
QUESTION 235
One of your sales executives is unable to complete long-distance calls.
The trouble ticket indicates that the user is dialing telephone numbers in 1+10 digit format.
Which action corrects it?
A. set the route pattern OnNet
B. Verify that the user is entering that correct access code for PSTN access before dialing the number
C. create a new globalized route pattern for the user
D. move the end user’s phone to a different partition and CSS
E. check if the phone is assigned to the end user
Lyla
January 19th, 2018
Which two issues can cause an IP phone to fail roaming when device mobility has been configured? (Choose two)
o No physical locations have been configured and assigned to the device pools.
o No locations have been configured and assigned to the device pools.
o No device mobility-related information settings were configured under the device pools.
o No device mobility groups have been configured.
o Device Mobility Mode is set to Off in the Cisco Unified Communications Manager service parameters while the device mobility configuration on the phone is set to default.
After you install the Cisco Jabber client, it fails to register with the Cisco Unified Communications Manager server. Which two actions can you take to troubleshoot the problem? (Choose two)
A. Verify Layer 3 connectivity on the gateway
B. Verify that the LMHOST file is installed on the PC
C. Reboot the Cisco Unified Border Element Gateway
D. Verify that the corporate firewall allows connections to and from the jabber client
E. Verify that the DNS SRV record is correctly configured
If a user receives a reorder tone after dialing a number, the Cisco Unified Communications Manager bandwidth allocation for the location of one of the call end devices may have been exceeded. Which option is true?
• If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 8k
• If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 16k
• If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 16k
If the call is using G.729. Cisco Unified CM subtracts 8k
• If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 24k
what is the bandwidth used by g.723 ??
Victor
January 20th, 2018
anyone making exam next week ?? pls tell me. We can share the Q248 VCE dumps
cyberknock
January 20th, 2018
Which two issues can cause an IP phone to fail roaming when device mobility has been configured? (Choose two)
X No physical locations have been configured and assigned to the device pools.
o No locations have been configured and assigned to the device pools.
o No device mobility-related information settings were configured under the device pools.
o No device mobility groups have been configured.
X Device Mobility Mode is set to Off in the Cisco Unified Communications Manager service parameters while the device mobility configuration on the phone is set to default.
After you install the Cisco Jabber client, it fails to register with the Cisco Unified Communications Manager server. Which two actions can you take to troubleshoot the problem? (Choose two)
A. Verify Layer 3 connectivity on the gateway
B. Verify that the LMHOST file is installed on the PC
C. Reboot the Cisco Unified Border Element Gateway
XD. Verify that the corporate firewall allows connections to and from the jabber client
XE. Verify that the DNS SRV record is correctly configured
If a user receives a reorder tone after dialing a number, the Cisco Unified Communications Manager bandwidth allocation for the location of one of the call end devices may have been exceeded. Which option is true?
• If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 8k
• If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 16k
• If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 16k
If the call is using G.729. Cisco Unified CM subtracts 8k
• If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 24k
strange answers …. in my opinion no answer is correct?
Shady
January 20th, 2018
@victor
Please share with me 248 vce at
Shady.mahmoud992 at gmail com
John Donald
January 22nd, 2018
Congrats!!!
Passed 300-080 exam last week!!! 9XX/1000 points!!!
I used PassLeader 300-080 dumps (248q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-080 dumps are available here FYI:
Pass Troubleshooting Cisco Unified Communications v8.0 (TVOICE v8.0) Exam by learning Pass4surekey dumps to get effective socre in exam. You can get latest 642-427 dumps from there https://www.pass4surekey.com/exam/642-427.html
Good Luck
cyberknock
January 23rd, 2018
Refer to the exhibit. An engineer is troubleshooting an issue with a newly configured transcoder. After the engineer configures the IOS device and Cisco Unified Communications Manager (CUCM), the device will not register. What must the engineer reconfigure to fix the issue?
A. The device pool on the transcoder
B. The device type on CUCM
C. The router to remove any unnecessary codecs
D. The router to match the profile name
I don’t know the exhibit but i would say it have to be D.
Roy
January 25th, 2018
Hi any valid update for dumps 300-080?
because i want take exam next month
thak you
lyla
January 25th, 2018
Refer to the exhibit. Calls from Phone 1(96641234), which is registered to Cluster A, are failing to Phone 2 (64431234), which is registered to Cluster XX. The exhibit was taken from Cluster XX. What are two possible root causes for this problem? (Choose two)
a Incoming calling search space on the Cluster B SIP trunk is misconfigured.
b The calling search space on the Cluster A SIP trunk is misconfigured.
c Cluster A is missing a route pattern to reach Cluster B.
d Cluster B is missing a route pattern to reach Cluster A.
e A translation pattern is misconfigured on Cluster B.
do you remembere this??
Based on the ACK SDP output, what can be concluded?
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
d This event is a multipoint video call with three participants.
When viewing the configuration of Intercluster Lookup service, this command is used to look up the URI of a remote cluster user
Admin: utils ils lookup user1 @ acme . com
routing string is cucm1.cisco.com
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of the remote cluster user?
A. SIP route pattern for domain * acme.com
B. end user with directory URI user1 @ acme.com
C. SIP trunk with destination cucm1 cisco.com
D. SIP route pattern for domain * cisco.com
cyberknock
January 25th, 2018
When viewing the configuration of Intercluster Lookup service, this command is used to look up the URI of a remote cluster user
Admin: utils ils lookup user1 @ acme . com
routing string is cucm1.cisco.com
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of the remote cluster user?
A. SIP route pattern for domain * acme.com
B. end user with directory URI user1 @ acme.com
C. SIP trunk with destination cucm1 cisco.com
D. SIP route pattern for domain * cisco.com
Anyone here to discuss this?
The command utils ils lookup is not available in CUCM 10.0 and higher.
anyway… route string returned is cucm1.cisco.com so D should be the correct answer.
What do you guys mean?
Paco -mujica
January 25th, 2018
I did yesterday but I fail whit 770 score but passleader dums is no updating
my opinion
QUESTION 235
One of your sales executives is unable to complete long-distance calls.
The trouble ticket indicates that the user is dialing telephone numbers in 1+10 digit format.
Which action corrects it?
A. set the route pattern OnNet
B. Verify that the user is entering that correct access code for PSTN access before dialing the number
C. create a new globalized route pattern for the user
D. move the end user’s phone to a different partition and CSS
E. check if the phone is assigned to the end user
Answer is B
regards
TripTip
January 25th, 2018
Tri
Save You Huge Exam Fee!!
Pass exam at first attempt.
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
Anyone plan to give exam , share with me email I’d , I can provide free dumps vce 300-080. Only need that people share experience after exam … just write email here to get dumps
shady
January 28th, 2018
@ Parul
shady.mahmoud992 Dot gmail com
Roy
January 29th, 2018
@ Parul
plese send to my email drupal.biru @ gmail .com
Parul Sharma
January 29th, 2018
@drupal. Check email
shady
January 29th, 2018
@ sharma send please
shady.mahmoud992 @ gmail com
Looney
January 29th, 2018
@Parul
fleflufle @ gmail .com
thanks in advance !
Faisal
January 29th, 2018
@Parul
please share with me
faisal.saoud @ hotmai . com
Diablos
January 29th, 2018
@Parul
Appreciate if you can send in the dumps
ahmedsamir2505 @ gmail .com
ted
January 29th, 2018
Based on the ACK SDP output, what can be concluded?
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
d This event is a multipoint video call with three participants.
A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work. Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
o Device Mobility Group
cyberknock
January 29th, 2018
A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work. Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group
D in my Opinon, discuss?
Parul Sharma
January 30th, 2018
Anyone who recently taken exam ? Pls share your experience guys . Will be helpful for everyone . Anyone who needs dumps just send me email .
roy
January 30th, 2018
Refer to the exhibit. A cisco Unified Communications Manager engineer configured CCD in two clusters. The patterns were successfully learned; however, the call attempt from the cluster 1 agent to the cluster 2 agent fails. Based on the output of this cluster 1 trace, what is the root cause of the issue?
a The pattern that was dialed has been added to the Blocked Learned Pattern configuration.
b The CCD partition is missing from the CCD Requesting Service configuration.
c The Activated Feature check in the CCD Requesting Service configuration is missing.
d The CSS is missing from the phones and line configuration.
Parul Sharma
February 1st, 2018
Anyone who going to take exam this week ? I can share the dumps against the experience in exam ; ) write your email here . Will reply back .
Stephen Kozar
February 1st, 2018
Hi!
Everyone here!!!
This site has much and much spam now.
I just created one WA Group for talking the CCNP exams.
If you want to talk and share, you can add the group by this link:
(copy that short link and open it in your web browser!!!)
Good luck, all!!!
Julian
February 1st, 2018
Parul please send on juljan555 @ gmail . com. I am going to give the exam next week
Roy
February 1st, 2018
@Parul please send on drupal.biru @ gmail . com. I am going to give the exam next week too
Parul Sharma
February 1st, 2018
@juljan555 Check it out. Sent you
cyberknock
February 3rd, 2018
I want to let you know that i passed 300-080 on 30. January with 926 points, i learned 2 months for it and checked my learning with the 248q pdf. In the exam i had approx. 10 questions from the pdf.
My conclusion, without really preparing for the exam you will not pass it, it was the tuffest one after 300-085.
Anyway, i am CCNP Collaboration now and i am so happy about it, my 2year goal is solved, next step is preparing for CCIE Collaboration 2.0, goal is to do the written middle 2019.
i wish you all good luck!
Parul Sharma
February 3rd, 2018
@cybernock
Can you pls try to give answer to above questions which I posted before . Now your this effort will let many people To pass exam and be ccnp . Thanks
Anonymous
February 4th, 2018
Pass exam at first attempt. Save You Huge Exam Fee!!
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
(copy that link and open it in your web browser!!!)
Good luck!
Faisal
February 5th, 2018
@cybernock
What is the material that you studied to help you pass this exam?
can you share link for downloading
Thanks
robert
February 6th, 2018
@cyberknock how do you prepare for 300-085??
cyberknock
February 7th, 2018
@Faisal, SRND, Service and Feature Guides, Deployment Guides, Troubleshooting Guides and working with those things.
@Robert, Cisco Press Book and SRND, Service and Feature Guides, Deployment Guides, Troubleshooting Guides and working with those things.
Daniel BA
February 19th, 2018
Passed 300-080 exam on 15/Feb/2018!!! 9XX/1000 points!!!
I used PassLeader 300-080 dumps (248q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-080 dumps are available here FYI:
(copy that short link and open it in your browser!!!)
Good Luck!!!
albert
February 22nd, 2018
Hi, I would like to start group buy for 300-080 dump.
We need 10 people , with individual contribution of $25 each.
please inform if you want to join
Please note: ****Once we have 10 people , i will send you the payment details by PM****
Anonymous
February 22nd, 2018
@albert
I am in ricky.maverick.1234 @ gmail.com
But do you know for sure which dumps are valid now?
albert
February 23rd, 2018
@Anonymous
Yes sure, i know which dumps are valid now. Please note: ****Once we have 10 people , i will send you the payment details by PM****
List of 10 people shown interest.
1. albert
2. ricky.maverick
=======================================
Hi, I would like to start group buy for 300-080 dump.
We need 10 people , with individual contribution of $25 each.
please inform if you want to join
Please note: ****Once we have 10 people , i will send you the payment details by PM****
Julian
February 23rd, 2018
Sounds pretty expensive 250$. What accuracy are we talking? When we make up ten, I guess you will give us more info?
albert
February 24th, 2018
@Julian
Yes, this dump is expensive because information from the vendor is $250 and the vendor is sp*to
if you interest i will inform to you, please inform your email first.
Looney
February 26th, 2018
@albert
i’m interested also (fleflufle @ gmail.com)
but roughly not interested with another fake crap like all spammers out here do advertise
as far as i see for now there’s no any accurate file about this exam among all vendors (PL, examcoll. , ITLibraries)
so the info about the accuracy of your option would be highly appreciated
albert
February 26th, 2018
@Looney
Yes sure, ****Once we have 10 people , i will send you the payment details by PM****
List of 10 people shown interest.
1. albert
2. ricky.maverick
3. Looney
=======================================
Hi, I would like to start group buy for 300-080 dump.
We need 10 people , with individual contribution of $25 each.
please inform if you want to join
Please note: ****Once we have 10 people , i will send you the payment details by PM****
julian
February 26th, 2018
There is a 157 Questions Dump published over some sites. Anyone has a feedback on it?
I paased exam. Review question on this site, a lot of them. 248 dumps, old one 642-427 Pass4Sure Troubleshooting Cisco Unified Communications v8.0 (TVOICE v8.0) Version: 6.0.
I had learn guide, documentation, on job…
1) 488 Media Not Acceptable – meaning
2) Login unavailable (23) – meaning, two question, one for extension mobility, seconde one for EMCC.
3) Replication – give description, you have to choose 0, 1, 2, 3 or 4
4) show mgcp connection
5) IOS configuration XCode, CFB, MTP… – question what is the problem, or how to do…
Ela
February 27th, 2018
VCS – where in configuration you set new SIP domain
brad
February 28th, 2018
@ela Thanks for the info! About how many questions came from the 248q?
Anybody giving exam next week ? 300-089 ?? Pls let me know .
300-080 i mean , I m giving next week Friday , pls let me know if anyone giving exam
@Sandy the questions are above, please help to answer them
Some of the questions I previously posted have been resolved. Blow is my revised list of questions, any help would be grateful since these are current test questions
1. (45) An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one. Which statement can be the cause of this issue?
a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
2. (70) Refer to the exhibit. A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit. The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unavailable (23)”. Which configuration requirement supports Cisco EMCC and avoids this error condition?
http://172.16.1.1:8080/emapp/EMAppServlet?device=#DEVICENAME#%EMCC=#EMCC#
a. The user must associate a device profile
b. The Cisco IP Phone Service Configuration for Cisco EMCC must set the enterprise subscription
c. The given user ID is not found in the remote cluster
d. The device must be subscribed to Cisco EMCC Services
3. (33) You are troubleshooting an intersite call between two endpoints where calls are intermittently failing with the error message “488 Not Acceptable Media”. Which option causes this error message to trigger?
a. The device pool contains more call processing agents in the CMO group than the endpoint can support
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support
d. MRGL contains more media groups than the endpoint can support
4. (26) You are troubleshooting support for g711alaw between two different sites. The current configuration is as follows:
Dspfarm profile 1 transcode
Codec g711ulaw
Codec g729ar8
Codec g729abr8
Codec g729br8
Codec g729r8
Maximum sessions 4
Associate application SCCP
Which two steps do you need to take in order to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command
5. (24) …configuration of Intercluster Lookup service, this command is used to look up the URI of a remote cluster user…
… … lookup {email not allowed}
…ing string is cucm1 cisco.com
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of the remote cluster user?
a. SIP route pattern for domain * acme.com
b. End user with directory URI {email not allowed}
c. SIP trunk with destination cucm1 cisco.com
d. SIP route pattern for domain * cisco.com
6. (17) … a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. Both sites use their local … At the headquarters site, the PSTN prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is … and the emergency number is 112. Here are the deployment policies for roaming devices?
• The phones can roam between two sites
• A roaming softphone uses the local gateway for all PSTN calls
• The user keeps home and dial habits on a roaming softphone, with the exception of the emergency number
When a headquarters user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work. Which setting on CUCM should be checked?
a. DHCP subnet
b. Device Mobility info
c. Device Mobility Group
d. Physical Location
for question 5, the sample email was blocked, it is: user1 @ acme . com
@sandy
yes i m’preparing to take exam too.
my email:Shady.mahmoud992 at gmail . com
4. (26) You are troubleshooting support for g711alaw between two different sites. The current configuration is as follows:
Dspfarm profile 1 transcode
Codec g711ulaw
Codec g729ar8
Codec g729abr8
Codec g729br8
Codec g729r8
Maximum sessions 4
Associate application SCCP
Which two steps do you need to take in order to add support for this codec? (Choose two)
a. Issue the command shutdown under the dspfarm profile ******
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
e. Add the command codec g711alaw and issue the no shutdown command *****
please share the ones that you have solved
Which two Cisco Unified Communications Manager operations will test reverse DNS lookup? (Choose two)
o Reboot
o Upgrade
o Installation
o Changing IP address or hostname
o Switch version
4. (26) You are troubleshooting support for g711alaw between two different sites. The current configuration is as follows:
Dspfarm profile 1 transcode
Codec g711ulaw
Codec g729ar8
Codec g729abr8
Codec g729br8
Codec g729r8
Maximum sessions 4
Associate application SCCP
Which two steps do you need to take in order to add support for this codec? (Choose two)
Xa. Issue the command shutdown under the dspfarm profile ******
b. Add the command codec g711alaw and issue the command no sccp followed by the command sccp
c. Issue the command no associate application sccp
d. Disassociate the profile under the CCM group
Xe. Add the command codec g711alaw and issue the no shutdown command *****
Which two Cisco Unified Communications Manager operations will test reverse DNS lookup? (Choose two)
o Reboot
o Upgrade
X Installation
x Changing IP address or hostname
o Switch version
anyone having lead2pass 248 dumps, pl share. i have exam next weekend. Then i can also here share my experience. Thanks
@Tony
3. (33) You are troubleshooting an intersite call between two endpoints where calls are intermittently failing with the error message “488 Not Acceptable Media”. Which option causes this error message to trigger?
a. The device pool contains more call processing agents in the CMO group than the endpoint can support
b. The hunt group contains more devices than the endpoint can support
X c. A lower bandwidth is set in the region than the endpoint can support
d. MRGL contains more media groups than the endpoint can support
@george looney
please send me on this mail
shady.mahmoud992 at gmail .com
as i ‘m taking the exam too.
here is the link where i have downloaded my file
https://drive.google.com/file/d/0B0NwfaGKfeTFeVU2RFpJa1ZmbUk/view?usp=sharing
@cyberknock
thank you so much
hey all ,,,,,,,,,,,,,,,,,,,,,,,
it seem that no one have the passlead dump 248 which is the most accurate these days
so if any on going to take exam soon .
please send me a mail on shady.mahmoud992 at gmail dot com
as we can buy the passlead dumps and studying these new question and i think we will pass .
as this secinario is hapening every exam .
also i making a wats group for studying and explain question
if any one is interested please join us as we now 4 .
thank you
@shandy, are you want to buy 248 dump?
please count me in
@roy plz send me on mail so i can get you and buy the dump
Also as ì menthoned i make wats group for exam prepartion
Passed 300-080 exam recently!!! 9XX/1000 points!!!
I used PassLeader 300-080 dumps (248q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-080 dumps are available here FYI:
http://bit.ly/300-080-dumps-online
(248q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, part of PassLeader 300-070 dumps are available here for your reference:
http://bit.ly/300-070-dumps-online
(228q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, part of PassLeader 300-075 dumps are available here for your reference:
http://bit.ly/300-075-dumps-online
(391q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, part of PassLeader 300-080 dumps are available here for your reference:
http://bit.ly/300-080-dumps-online
(248q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, part of PassLeader 300-085 dumps are available here for your reference:
http://bit.ly/300-085-dumps-online
(186q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
new ccie lab dumps
http://cciedump.spoto.net/ccie-rs-lab.php
70. Refer to the URL. A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit. The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”. Which configuration requirement supports Cisco EMCC and avoids this error condition?
http://172.16.1.1:8080/emapp/EMAppServlet?device=#DEVICENAME#%EMCC=#EMCC#
a. The user must associate a device profile
b. The Cisco IP Phone Service Configuration for Cisco EMCC must set the enterprise subscription
c. The given user ID is not found in the remote cluster
d. The device must be subscribed to Cisco EMCC Services
45. An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one. Which statement can cause of this issue?
a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
2018 latest CCIE Dumps
freeciscodumps.com/rs-ccie.php
Download All Cisco CCNA updated Question Answers here: https://dumpsgator.com/vendor/Cisco-braindumps-questions
45. An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one. Which statement can cause of this issue?
X a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge
Must be A
Here from the TS Conductor Admin Guide:
It is possible to use the TelePresence Conductor without a release key, as TelePresence Conductor Essentials. This
results in limited system capacity. The limitations are:
■ The TelePresence Conductor cannot be part of a cluster.
■ Only one standalone conference bridge across all conference bridge pools can be enabled at a time
Users in your enterprise can establish PSTN calls, but users notice that when they attempt to perform a transfer the call fails. Which two actions must you take to troubleshoot the problem? (Choose two.)
A. Verify that media resources are assigned to the transcoder.
B. Verify that MTP resources are registered with Cisco Unified Communications Manager.
C. Use RTMT Performance monitoring to verify that an MTP device is available to support supplementary services.
D. Restart the Cisco Serviceability tool.
E. Restart Cisco Unified Communications Manager services.
Users in your enterprise can establish PSTN calls, but users notice that when they attempt to perform a transfer the call fails. Which two actions must you take to troubleshoot the problem? (Choose two.)
A. Verify that media resources are assigned to the transcoder.
B. Verify that MTP resources are registered with Cisco Unified Communications Manager.
C. Use RTMT Performance monitoring to verify that an MTP device is available to support supplementary services.
D. Restart the Cisco Serviceability tool.
E. Restart Cisco Unified Communications Manager services.
BC as the main issue are supplementary services
thank @cyber
could you help me with this one
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was not activated.
d An H.323 SAF trunk was configured instead of a SIP SAF trunk
e CCD advertising service was not activated.
update dumps
freeciscodumps dot com
@Lyla
I have:
Incorrect user credentials were used on the SAF Forwarder
CCD Requesting service was not activated
@Cyberknock, Thank you
@Lyla Tony’s answers are correct
thanks guys,
One of your sales executives is unable to complete long-distance calls. The trouble ticket indicates that the user is dialing telephone numbers in 1 + 10 digit format. Which two actions can you take to correct the problem? (Choose two).
A. Correct the end user´s phone calling search space and partition to allow long distance calls.
B. Create a new globalized route pattern for the user.
C. Check if the phone is assigned to the end user page.
D. Set the route pattern to OnNet.
E. Verify that the user is entering the correct access code for PSTN access before dialing the telephone number.
An engineer has a SIP trunk configured between Cisco Unified Communications Manager (CUCM) and a Cisco VCS cluster. When a call is made from a Cisco TelePresence System EX60 that is registered to the Cisco VCS to a Cisco IP Phone 9971 that is registered to CUCM, it rings. But upon picking up the call, a busy tone is heard. What should be checked to resolve this issue?
o SIP trunk registration
o CUCM zone on the Cisco VCS
o SIP trunk and phone region settings
o Authentication on the SIP trunk
0In this CUCM dial-plan, a localized translation pattern 9.1[2-9]XX[2-9]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. This Translation Pattern is used to globalize the User´s dialed digits followed by matching a \+! Route Pattern as seen in the Exhibit. Users with devices/Lines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678309 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
A. Route Pattern does not have “Urgent Priority” checked
B. Route Pattern does not have “Allow Overlap Sending” checked
C. Translation Pattern does not have “Urgent Priority” checked
D. Router Pattern Call Classification set to Offnet
E. Translation Pattern has “Provide Outside Dial Tone” checked.
Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
o Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”
An engineer has a SIP trunk configured between Cisco Unified Communications Manager (CUCM) and a Cisco VCS cluster. When a call is made from a Cisco TelePresence System EX60 that is registered to the Cisco VCS to a Cisco IP Phone 9971 that is registered to CUCM, it rings. But upon picking up the call, a busy tone is heard. What should be checked to resolve this issue?
o SIP trunk registration
o CUCM zone on the Cisco VCS
X SIP trunk and phone region settings
o Authentication on the SIP trunk
If signaling is ok then the issue have to be codec related -> regions
In this CUCM dial-plan, a localized translation pattern 9.1[2-9]XX[2-9]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. This Translation Pattern is used to globalize the User´s dialed digits followed by matching a \+! Route Pattern as seen in the Exhibit. Users with devices/Lines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678309 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
A. Route Pattern does not have “Urgent Priority” checked
B. Route Pattern does not have “Allow Overlap Sending” checked
C. Translation Pattern does not have “Urgent Priority” checked
D. Router Pattern Call Classification set to Offnet
E. Translation Pattern has “Provide Outside Dial Tone” checked.
They want to know if you are familar with urgent priority -> AC
Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
x Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”
Stop the last one is not correct, there is no 2XX Expiry Timer in SIP Profile.
But i do not know the answer
From https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b06siprf.pdf
Timer Register Delta
(seconds)
Use this parameter in conjunction with the Timer Register Expires setting.
The phone reregisters Timer Register Delta seconds before the registration
period ends. The registration period gets determined by the value of the SIP
Station KeepAlive Interval service parameter. Valid values range from 32767
to 0. Default specifies 5.
In my opinion it should be this timer, because the Station Keepalive Interval is as he name says a keepalive timer, but from the question the client fails to register.
So my answer would be B.
i have also the info from my CCIE teammates that the station interval timer only have effect on skinny devices
@cyberknock thank you very much
what do you think onthis
One of your sales executives is unable to complete long-distance calls. The trouble ticket indicates that the user is dialing telephone numbers in 1 + 10 digit format. Which two actions can you take to correct the problem? (Choose two).
A. Correct the end user´s phone calling search space and partition to allow long distance calls.
B. Create a new globalized route pattern for the user.
C. Check if the phone is assigned to the end user page.
D. Set the route pattern to OnNet.
E. Verify that the user is entering the correct access code for PSTN access before dialing the telephone number.
I am going to buy 300-080 latest dump, the persons who want to give exams can write me email and we can share our questions in exam and can help each other .
er_sandeepsuman@ rediffmail.com
One of your sales executives is unable to complete long-distance calls. The trouble ticket indicates that the user is dialing telephone numbers in 1 + 10 digit format. Which two actions can you take to correct the problem? (Choose two).
A. Correct the end user´s phone calling search space and partition to allow long distance calls.
B. Create a new globalized route pattern for the user.
C. Check if the phone is assigned to the end user page.
D. Set the route pattern to OnNet.
E. Verify that the user is entering the correct access code for PSTN access before dialing the telephone number.
This is really funny, in my 248q dump there is only one option to choose, in my opinion the question in your example is wrong because only one option make sense.
Only option E makes sense …
In my dump the question is:
QUESTION 235
One of your sales executives is unable to complete long-distance calls.
The trouble ticket indicates that the user is dialing telephone numbers in 1+10 digit format.
Which action corrects it?
A. set the route pattern OnNet
B. Verify that the user is entering that correct access code for PSTN access before dialing the number
C. create a new globalized route pattern for the user
D. move the end user’s phone to a different partition and CSS
E. check if the phone is assigned to the end user
Which two issues can cause an IP phone to fail roaming when device mobility has been configured? (Choose two)
o No physical locations have been configured and assigned to the device pools.
o No locations have been configured and assigned to the device pools.
o No device mobility-related information settings were configured under the device pools.
o No device mobility groups have been configured.
o Device Mobility Mode is set to Off in the Cisco Unified Communications Manager service parameters while the device mobility configuration on the phone is set to default.
After you install the Cisco Jabber client, it fails to register with the Cisco Unified Communications Manager server. Which two actions can you take to troubleshoot the problem? (Choose two)
A. Verify Layer 3 connectivity on the gateway
B. Verify that the LMHOST file is installed on the PC
C. Reboot the Cisco Unified Border Element Gateway
D. Verify that the corporate firewall allows connections to and from the jabber client
E. Verify that the DNS SRV record is correctly configured
If a user receives a reorder tone after dialing a number, the Cisco Unified Communications Manager bandwidth allocation for the location of one of the call end devices may have been exceeded. Which option is true?
• If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 8k
• If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 16k
• If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 16k
If the call is using G.729. Cisco Unified CM subtracts 8k
• If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 24k
what is the bandwidth used by g.723 ??
anyone making exam next week ?? pls tell me. We can share the Q248 VCE dumps
Which two issues can cause an IP phone to fail roaming when device mobility has been configured? (Choose two)
X No physical locations have been configured and assigned to the device pools.
o No locations have been configured and assigned to the device pools.
o No device mobility-related information settings were configured under the device pools.
o No device mobility groups have been configured.
X Device Mobility Mode is set to Off in the Cisco Unified Communications Manager service parameters while the device mobility configuration on the phone is set to default.
After you install the Cisco Jabber client, it fails to register with the Cisco Unified Communications Manager server. Which two actions can you take to troubleshoot the problem? (Choose two)
A. Verify Layer 3 connectivity on the gateway
B. Verify that the LMHOST file is installed on the PC
C. Reboot the Cisco Unified Border Element Gateway
XD. Verify that the corporate firewall allows connections to and from the jabber client
XE. Verify that the DNS SRV record is correctly configured
If a user receives a reorder tone after dialing a number, the Cisco Unified Communications Manager bandwidth allocation for the location of one of the call end devices may have been exceeded. Which option is true?
• If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 8k
• If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 16k
• If the call is using G.711. Cisco Unified CM subtracts 64k
If the call is using G.723. Cisco Unified CM subtracts 16k
If the call is using G.729. Cisco Unified CM subtracts 8k
• If the call is using G.711. Cisco Unified CM subtracts 80k
If the call is using G.723. Cisco Unified CM subtracts 24k
If the call is using G.729. Cisco Unified CM subtracts 24k
what is the bandwidth used by g.723 ??
https://www.cisco.com/c/en/us/support/docs/voice/voice-quality/7934-bwidth-consume.html
strange answers …. in my opinion no answer is correct?
@victor
Please share with me 248 vce at
Shady.mahmoud992 at gmail com
Congrats!!!
Passed 300-080 exam last week!!! 9XX/1000 points!!!
I used PassLeader 300-080 dumps (248q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-080 dumps are available here FYI:
http://bit.ly/300-080-dumps-online
(248q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, PassLeader 300-070 dumps are available here for your reference:
http://bit.ly/300-070-dumps-online
(228q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
And, PassLeader 300-075 dumps are available here FYI:
http://bit.ly/300-075-dumps-online
(391q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
Also, PassLeader 300-085 dumps are available here for your reference:
http://bit.ly/300-085-dumps-online
(186q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
dumps new
free
cisco
dumps
dot com
Pass Troubleshooting Cisco Unified Communications v8.0 (TVOICE v8.0) Exam by learning Pass4surekey dumps to get effective socre in exam. You can get latest 642-427 dumps from there https://www.pass4surekey.com/exam/642-427.html
Good Luck
Refer to the exhibit. An engineer is troubleshooting an issue with a newly configured transcoder. After the engineer configures the IOS device and Cisco Unified Communications Manager (CUCM), the device will not register. What must the engineer reconfigure to fix the issue?
A. The device pool on the transcoder
B. The device type on CUCM
C. The router to remove any unnecessary codecs
D. The router to match the profile name
I don’t know the exhibit but i would say it have to be D.
Hi any valid update for dumps 300-080?
because i want take exam next month
thak you
Refer to the exhibit. Calls from Phone 1(96641234), which is registered to Cluster A, are failing to Phone 2 (64431234), which is registered to Cluster XX. The exhibit was taken from Cluster XX. What are two possible root causes for this problem? (Choose two)
a Incoming calling search space on the Cluster B SIP trunk is misconfigured.
b The calling search space on the Cluster A SIP trunk is misconfigured.
c Cluster A is missing a route pattern to reach Cluster B.
d Cluster B is missing a route pattern to reach Cluster A.
e A translation pattern is misconfigured on Cluster B.
do you remembere this??
Based on the ACK SDP output, what can be concluded?
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
d This event is a multipoint video call with three participants.
When viewing the configuration of Intercluster Lookup service, this command is used to look up the URI of a remote cluster user
Admin: utils ils lookup user1 @ acme . com
routing string is cucm1.cisco.com
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of the remote cluster user?
A. SIP route pattern for domain * acme.com
B. end user with directory URI user1 @ acme.com
C. SIP trunk with destination cucm1 cisco.com
D. SIP route pattern for domain * cisco.com
When viewing the configuration of Intercluster Lookup service, this command is used to look up the URI of a remote cluster user
Admin: utils ils lookup user1 @ acme . com
routing string is cucm1.cisco.com
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of the remote cluster user?
A. SIP route pattern for domain * acme.com
B. end user with directory URI user1 @ acme.com
C. SIP trunk with destination cucm1 cisco.com
D. SIP route pattern for domain * cisco.com
Anyone here to discuss this?
The command utils ils lookup is not available in CUCM 10.0 and higher.
anyway… route string returned is cucm1.cisco.com so D should be the correct answer.
What do you guys mean?
I did yesterday but I fail whit 770 score but passleader dums is no updating
my opinion
QUESTION 235
One of your sales executives is unable to complete long-distance calls.
The trouble ticket indicates that the user is dialing telephone numbers in 1+10 digit format.
Which action corrects it?
A. set the route pattern OnNet
B. Verify that the user is entering that correct access code for PSTN access before dialing the number
C. create a new globalized route pattern for the user
D. move the end user’s phone to a different partition and CSS
E. check if the phone is assigned to the end user
Answer is B
regards
Tri
Save You Huge Exam Fee!!
Pass exam at first attempt.
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
Instant Download Latest Dumps:
https://docs.google.com/document/d/1qVfGQ3eWc81pGKEN5NFkLW-SoW2NAjHsijf0Gp4EcR4/edit?usp=sharing
latest ccna dumps
http://www.dumpspro.com/ccna-dumps
Anyone plan to give exam , share with me email I’d , I can provide free dumps vce 300-080. Only need that people share experience after exam … just write email here to get dumps
@ Parul
shady.mahmoud992 Dot gmail com
@ Parul
plese send to my email drupal.biru @ gmail .com
@drupal. Check email
@ sharma send please
shady.mahmoud992 @ gmail com
@Parul
fleflufle @ gmail .com
thanks in advance !
@Parul
please share with me
faisal.saoud @ hotmai . com
@Parul
Appreciate if you can send in the dumps
ahmedsamir2505 @ gmail .com
Based on the ACK SDP output, what can be concluded?
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
d This event is a multipoint video call with three participants.
A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work. Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
o Device Mobility Group
A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work. Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group
D in my Opinon, discuss?
Anyone who recently taken exam ? Pls share your experience guys . Will be helpful for everyone . Anyone who needs dumps just send me email .
Refer to the exhibit. A cisco Unified Communications Manager engineer configured CCD in two clusters. The patterns were successfully learned; however, the call attempt from the cluster 1 agent to the cluster 2 agent fails. Based on the output of this cluster 1 trace, what is the root cause of the issue?
a The pattern that was dialed has been added to the Blocked Learned Pattern configuration.
b The CCD partition is missing from the CCD Requesting Service configuration.
c The Activated Feature check in the CCD Requesting Service configuration is missing.
d The CSS is missing from the phones and line configuration.
Anyone who going to take exam this week ? I can share the dumps against the experience in exam ; ) write your email here . Will reply back .
Hi!
Everyone here!!!
This site has much and much spam now.
I just created one WA Group for talking the CCNP exams.
If you want to talk and share, you can add the group by this link:
http://bit.ly/ccnp-study-share-group
(copy that short link and open it in your web browser!!!)
Good luck, all!!!
Parul please send on juljan555 @ gmail . com. I am going to give the exam next week
@Parul please send on drupal.biru @ gmail . com. I am going to give the exam next week too
@juljan555 Check it out. Sent you
I want to let you know that i passed 300-080 on 30. January with 926 points, i learned 2 months for it and checked my learning with the 248q pdf. In the exam i had approx. 10 questions from the pdf.
My conclusion, without really preparing for the exam you will not pass it, it was the tuffest one after 300-085.
Anyway, i am CCNP Collaboration now and i am so happy about it, my 2year goal is solved, next step is preparing for CCIE Collaboration 2.0, goal is to do the written middle 2019.
i wish you all good luck!
@cybernock
Can you pls try to give answer to above questions which I posted before . Now your this effort will let many people To pass exam and be ccnp . Thanks
Pass exam at first attempt. Save You Huge Exam Fee!!
Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
Instant Download Latest Dumps:
https://rebrand.ly/ccnacc7d5
The latest CCNP dumps collection (300-070/300-075/300-080/300-085):
docs.google.com/spreadsheets/d/1Yx4MUGmaLRn-UtgVVlfEdrpnM9d0RK02xJwjPmi-jCw/
(copy that link and open it in your web browser!!!)
Good luck!
@cybernock
What is the material that you studied to help you pass this exam?
can you share link for downloading
Thanks
@cyberknock how do you prepare for 300-085??
@Faisal, SRND, Service and Feature Guides, Deployment Guides, Troubleshooting Guides and working with those things.
@Robert, Cisco Press Book and SRND, Service and Feature Guides, Deployment Guides, Troubleshooting Guides and working with those things.
Passed 300-080 exam on 15/Feb/2018!!! 9XX/1000 points!!!
I used PassLeader 300-080 dumps (248q~~~2018 NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!
And, part of PassLeader 300-080 dumps are available here FYI:
http://bit.ly/300-080-dumps-online
(248q~~~2018 NEW VERSION DUMPS!!!)
Good Luck!!!
More, part of PassLeader 300-085 dumps are available here for your reference:
http://bit.ly/300-085-dumps-online
(186q~~~2018 NEW VERSION DUMPS!!!)
(copy that short link and open it in your browser!!!)
Good Luck!!!
More, part of PassLeader 300-070 dumps are available here for your reference:
http://bit.ly/300-070-dumps-online
(228q~~~2018 NEW VERSION DUMPS!!!)
(copy that short link and open it in your browser!!!)
Good Luck!!!
More, part of PassLeader 300-075 dumps are available here for your reference:
http://bit.ly/300-075-dumps-online
(391q~~~2018 NEW VERSION DUMPS!!!)
(copy that short link and open it in your browser!!!)
Good Luck!!!
Hi, I would like to start group buy for 300-080 dump.
We need 10 people , with individual contribution of $25 each.
please inform if you want to join
Please note: ****Once we have 10 people , i will send you the payment details by PM****
@albert
I am in ricky.maverick.1234 @ gmail.com
But do you know for sure which dumps are valid now?
@Anonymous
Yes sure, i know which dumps are valid now. Please note: ****Once we have 10 people , i will send you the payment details by PM****
List of 10 people shown interest.
1. albert
2. ricky.maverick
=======================================
Hi, I would like to start group buy for 300-080 dump.
We need 10 people , with individual contribution of $25 each.
please inform if you want to join
Please note: ****Once we have 10 people , i will send you the payment details by PM****
Sounds pretty expensive 250$. What accuracy are we talking? When we make up ten, I guess you will give us more info?
@Julian
Yes, this dump is expensive because information from the vendor is $250 and the vendor is sp*to
if you interest i will inform to you, please inform your email first.
@albert
i’m interested also (fleflufle @ gmail.com)
but roughly not interested with another fake crap like all spammers out here do advertise
as far as i see for now there’s no any accurate file about this exam among all vendors (PL, examcoll. , ITLibraries)
so the info about the accuracy of your option would be highly appreciated
@Looney
Yes sure, ****Once we have 10 people , i will send you the payment details by PM****
List of 10 people shown interest.
1. albert
2. ricky.maverick
3. Looney
=======================================
Hi, I would like to start group buy for 300-080 dump.
We need 10 people , with individual contribution of $25 each.
please inform if you want to join
Please note: ****Once we have 10 people , i will send you the payment details by PM****
There is a 157 Questions Dump published over some sites. Anyone has a feedback on it?
2018 latest ccna dumps
http://www.dumpspro.com/ccna_dumps.php
I paased exam. Review question on this site, a lot of them. 248 dumps, old one 642-427 Pass4Sure Troubleshooting Cisco Unified Communications v8.0 (TVOICE v8.0) Version: 6.0.
I had learn guide, documentation, on job…
1) 488 Media Not Acceptable – meaning
2) Login unavailable (23) – meaning, two question, one for extension mobility, seconde one for EMCC.
3) Replication – give description, you have to choose 0, 1, 2, 3 or 4
4) show mgcp connection
5) IOS configuration XCode, CFB, MTP… – question what is the problem, or how to do…
VCS – where in configuration you set new SIP domain
@ela Thanks for the info! About how many questions came from the 248q?