Share your TVoice v8.0 Experience

I_know

no valid dumps between passleader and lead2pass

Thanks Roy…
just have to work hard. Fail, study again and then pass.
Braindump… questions are there on every dump..
Waste of time and money.
No thanks for your advertising Chetan

Just failed it. 813 from 860.
71 Quesitons in total. I believe half of them from the 248 Dump.

@Julian

Do you remember any of those new question?

@julian

You were lucky, I failed with 815.
I was matched only 17 questions from the 248Q & A

no dump is valid now!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@all

Do you remember anything? please share

PLEASE WE NEED INPUT FROM YOU GUYS!!

@Alpha

unfortunately not, there are many

dump with 248 Q only covers around 25-30 questions at max it may be less.
@Juan not sure what you meant in your post.

attempt failed
Q: IOS command to display active connection that are controlled by MGCP
show mgcp nas
Show mgcp endpoint
show mgcp connection
show mgcp statistics

Show mgcp connections. Do you have more?

Anu updats Guys?

Guy anyone recently took this exam?

hello
i wiil take this exam in to 21 december someone have guide recently?

Hello @Paco-mujica;

I hope to u pass the exam, and I ask from u post anything u know about exam and the dump u will study from it and hope to post ur email to communicate with to exchange experience.
Good Luck 🙂

Thanks

Hi Paco

what is the dump u will study?

thanks

Team,

Any one recently took this exam. Please share your experience.

Thank you.

any update?? I am planning to take the exam next week!

@rebert

I hope to u to pass this exam, please share your experience.

Thanks

any update for 300-080 exam??

nothing for now, the dumps passleader are not valid!!!

No one want to take this exam !!!

why @Faisal is it too difficult??

I don’t know, but I am noticing that no one want to take this exam?

Any Valid Dumps for 300-075? I need to write it in a couple of weeks…. gonna expire soon, please help.

Guys, any update please I’m begging you please share if you have something.

@ Alpha : 2 attempts both un successful
one thing is clear none of the dumps are valid so dont waste time and mony on that only 20 question at max from dunps

@jack_any

Have faith my brother

@jack_any,

May you pls share few questions which you remember.

I passed the exam…Yohoo!!! Merry Christmas y’all!

@Alpha

Congratulations, please share your experience and the dump you studied

Thanks

@Alpha
I know not many people helped you on this forum.
But I hope you can set an example.
Could you please share the dumps you studied and if any study material you can recommend.
I have to clear 300-080 and 300-085 exams by end of this year.

ricky.maverick.1234 @ gmail.com

248 dump is still the best for 300-085.

Focus on SAF registration.
Mobility.
ILS.
URI.
Audio issue, Call set up issue – always check the region setup, MTP, transcoder.
One way audio – This is cause by Firewall, ACL blocking RTP packets.
Studied CSS, route pattern, SIP trunks, H.2XX protocol

I got 9XX/1000 this is passable. I took 2 attempts before I nailed it. It was my fault why I failed on my first attempt I did not focus and I was so tired that time. My first attempt I got 839 and passing score is 860. You can pass this exam in one shot if you give sometime to your self to read and watch video of those topics. Its not hard u just need to believe with your self. Understand the question and u will get the right answer even without the dumps. Trust me!

Take the exam before the year change.. January will be a different set of exam and it will be harder.

Dear Alpha,

Thanks for your response, Are you share with us the document u used.

Thanks

@Alpha, Congrats!!

try to share material with us since you know it is bit tough to crack. need your help!!

Thanks!

Hi, any news about a valid dump for CTCOLLAB exam 300-080 ? please need your help

Passed 300-080 exam last week!!! 9XX/1000 points!!!

I used PassLeader 300-080 dumps (248q~~~NEW VERSION DUMPS!!!), all new questions are from it and wrong answers have been corrected, valid enough for passing now!!!

And, part of PassLeader 300-080 dumps are available here FYI:

http://bit.ly/300-080-dumps-online

(248q~~~NEW VERSION DUMPS!!!)

Good Luck!!! Merry X’mas!!!

And, part of PassLeader 300-085 dumps are available here FYI:

http://bit.ly/300-085-dumps-online

(186q~~~NEW VERSION DUMPS!!!)

Good Luck!!! Merry X’mas!!!

And, part of PassLeader 300-070 dumps are available here FYI:

http://bit.ly/300-070-dumps-online

(228q~~~NEW VERSION DUMPS!!!)

Good Luck!!! Merry X’mas!!!

And, part of PassLeader 300-075 dumps are available here FYI:

http://bit.ly/300-075-dumps-online

(391q~~~NEW VERSION DUMPS!!!)

Good Luck!!! Merry X’mas!!!

Hi All,

As I said I just used 248q and watched video and read books on those topics that I’d posted on the top. That was enough for me to get 9XX on the exam. Study how those technology works, configuration and U will be good to go. There’s nothing special on the exam. All issue for one way is related on Blocking/ACL, SAF not registering check the config, username/password etc, Protocol H2XX – just read them to have some idea it was useful during exam no need to go deeper, make it simple. Phone registration Just watch CBT phone registration or video on youtube, There will be alot of question on the one why phone is not registering obliviously you need to make sure the VLAN/Network can reach CUCM/TFTP, NO ACL blocking the network, Use working port/cubicle to isolate port issue. Read SIP messages invites thats gonna be helpful.

Merry Christmas guys! Wish all the best!

Take time to read and watch and u will be good.

The exam is not hard – Trust me! U can pass it by one take, Don’t depend to much on the dump, All u need to do is to watch and read. And u will be good.

Next year it will be more harder. I suggest take it now or u will wait again to someone to try it again. The exam will change on 2018.

@Alpha

Thanks for sharing this !
Could you give some clue about the info : The exam will change on 2018 ?

since i’ve looked through the Net and did not see any official marks on CCNP Collab. track exam changes upcoming

looking forward to prepare and try it @ 2018

@ Beta

When I say exam change, I meant there will be a new set of question that we be shuffle with the existing one. So, Currently there are 20 questions from the 248q dumps showing up on the real exam and if they add new set of question this coming new year the probability to pass the exam will go lower. am I right?

Passed today!! yohooo!!! I got 903/1000

Exam is easy he’s right guys.

Just study those topic for CTCOLLAB and 248q and u can pass it.

Thank you Alpha for boosting my confidence!

Happy New year to all!

@Superman – Please don’t thank me, Thank your self 🙂 U did a job well done my friend and u deserved it amigo. Congrats and enjoy your holiday!

Hi, any news about a valid dump for CTCOLLAB exam 300-080 ?

question

An engineer is configure an IOS MTP on a Cisco 2911 Isr and CUCM):
dspfarm profile 20 mtp
codec g711ulaw
maximum sessions software 10
associate application SCCP
shutdown
The MTP will not register with CUCM. problem?
o The dspfarm profile is in a down state
o The MTP type is not compatible with CUCM
o The MTP type is incorrect
o The MTP is not enabled on CUCM

@lyla

Correct answer is –> The dspfarm profile is in a down state

Save You Huge Exam Fee!!
instant Download now.

Please follow below link to pass in first attempt.

The dumps are very stable good luck for all guys.
Only@20
Get DOWNLOAD Latest VALID Voice and Video New Valid Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below web:
http://rebrand.ly/ccnac9fa4

Passed! Got 914/1000

@Alpha – THANK U SIR! UR THE MAN!

@ D_man

What is the dump that you used and share your experience?

Thanks

i have a question but not the options

Endpoint A is registered to Cucm as {email not allowed}. It is trying to call Endpoint B, which is registered to the same company´s Cisco VCS Control with an H.323 ID of {email not allowed}. The route pattern is set to “*.*” and is pointed to a SIP trunk to the Cisco VCS Control. The search rule for (.*){email not allowed} is set to search the local zone. The call does not work. What is a possible reason?

Endpoint A is registered to Cisco Unified Communications Manager as S1 at company.com. It is trying to call Endpoint B, which is registered to the same company´s Cisco VCS Control with an H.323 ID of S2.internal at company.com. The route pattern is set to “*.*” and is pointed to a SIP trunk to the Cisco VCS Control. The search rule for (.*).internal at company.com is set to search the local zone. The call does not work. What is a possible reason?

it could be the interworking option in VCS??

@Faisal

I just followed Alpha advice. I used 248q dump then read the topic he posted at page 12. Then boom! I got 9XX

In a single-site deployment model, the internal endpoints are unable to dial from one to the other. What
are two possible causes? (Choose two.)
A. The PSTN gateway is not configured.
B. The called endpoint does not have the SIP trunk enabled.
C. The called endpoint is not registered.
D. The calling endpoint is not in the CSS of the called endpoint.
E. The called endpoint is not in the partition of the calling endpoint.

@ Robert

This was my answer during my exam:

The called endpoint is not registered.
The calling endpoint is not configured for the correct CoS.

latest ccie dumps
cciedump.spoto.net/rs-ccie.php
good luck all guys

@D_man

Could u post the links for material that you have to pass it?

Thanks

Dear ALL, I need CICD 210-060 Valid dump can any one help me, my mail eng.m.abdo89@gmailcom

Hi Everyone,
Can somebody please pass on the pdf books for CCNP Collab
300-070, 300-075, 300-080, 300-085
It would be a great help
Ricky.maverick.1234 @ gmail.com

Hi! Just passed 300-080 examrecently!!! 9XX/1000 points!!!

I mainly learned premium PassLeader 300-080 dumps (248q~~~NEW VERSION DUMPS!!!), 100% valid for passing now!

And, part of PassLeader 300-080 dumps are available here FYI:

http://bit.ly/300-080-dumps-online

(248q~~~NEW VERSION DUMPS!!!)

Good Luck!!! Happy New Year!!!

And, part of PassLeader 300-085 dumps are available here FYI:

http://bit.ly/300-085-dumps-online

(186q~~~NEW VERSION DUMPS!!!)

Good Luck!!! Happy New Year!!!

And, part of PassLeader 300-070 dumps are available here FYI:

http://bit.ly/300-070-dumps-online

(228q~~~NEW VERSION DUMPS!!!)

Good Luck!!! Happy New Year!!!

And, part of PassLeader 300-075 dumps are available here:

http://bit.ly/300-075-dumps-online

(391q~~~NEW VERSION DUMPS!!!)

Good Luck!!! Happy New Year!!!

Please make this group more relevant , beware from spammers.
Regards,
Rahul

Hi guys could you help me with this one

You enabled Service Advertisement Framework, Call Control Discovery between your Cisco Unified Communications Manager clusters. You see remote extension as learned DN patterns, but calls are unsuccessful. Which two causes of this issue are likely? (Choose two)
A. Pattern is not defined in hosted DN configuration.
B. Enable SAF is not in SIP trunk configuration.
C. Call Control Discovery partition is not assigned to your Calling Search Space.
D. Enable SAF is not set in H.323 trunk configuration.
E. Advertising Service is blocking pattern

I would say CE

2018 spoto latest ccna dumps
cciedump.spoto.net/rs-ccna.php

Can anyone share the 248q. I might have something you need.

Cancel that, I have them.

Please your help

Endpoint A is registered to Cisco Unified Communications Manager as S1 at company.com. It is trying to call Endpoint B, which is registered to the same company´s Cisco VCS Control with an H.323 ID of S2.internal at company.com. The route pattern is set to “*.*” and is pointed to a SIP trunk to the Cisco VCS Control. The search rule for (.*).internal at company.com is set to search the local zone. The call does not work. What is a possible reason?

***no options remeber

2.- You enabled Service Advertisement Framework, Call Control Discovery between your Cisco Unified Communications Manager clusters. You see remote extension as learned DN patterns, but calls are unsuccessful. Which two causes of this issue are likely? (Choose two)
A. Pattern is not defined in hosted DN configuration.
B. Enable SAF is not in SIP trunk configuration.
C. Call Control Discovery partition is not assigned to your Calling Search Space.
D. Enable SAF is not set in H.323 trunk configuration.
E. Advertising Service is blocking pattern

3.- You have configured a new MGCP gateway on your Cisco Communications Manager servers but the endpoints are shown with status “None”. What are two possible solutions for this registration issue? (Choose two)
A. Ensure that you have configured the ccm-manager call-agent command with the correct Cisco Communication Manager server address or hostname.
B. Activate the MGCP Feature service on all call-processing servers in the cluster.
C. Enable the endpoint voice interface for backhauling in interface configuration mode with the isdn bind-I3 ccm-manager command.
D. Ensure that you have configured the mgcp call-agent command with the Cisco Unified Communications Manager server address or hostname.
E. Configure the voice-VLAN interface of the MGCP gateway with mgcp-gateway voip interface command to set the source IP address of the MGCP packets correctly.

@Lyla,

When u will take this exam? and what is the dump that u are studying?

Thanks

@Faisal
I just failed and those questions i remembered, could you help me ??

@lyla
can you send me on my gmail as we can share the answers as i’m studying too and i want to exam as soon as possible.
shady.mahmoud992 at gmail Dot com

@lyla
when you took your last exams!!

@shady
I took it two weeks ago, those are the only questions i remembered, if you remembered other please share

@lyla

Endpoint A is registered to Cisco Unified Communications Manager as {email not allowed}. It is trying to call Endpoint B, which is registered to the same
company’s Cisco VCS Control with an H.323 ID of {email not allowed}. The route pattern is set to “*.*” and is pointed to a SIP trunk to the Cisco VCS
Control. The search rule for (.*){email not allowed} is set to search the local zone. The call does not work. What is a possible reason?
A. There is no search pattern to route the call to System B.
B. There is no valid route pattern to route from System A to System B.
C. System B is registered as H.323 and needs to use an E.164 alias number only.
D. The Cisco VCS Control should be neighbor to the Cisco Unified Communications Manager.
E. You need an MGCP gateway to route from the Cisco Unified Communications Manager to the Cisco VCS Control.
F. The Cisco VCS Control is missing the Cisco Unified Communications Manager interop option.
G. The Cisco VCS Control is missing the interworking option.

G because s1 is regsitered to cucm it is a sip endpoint and calls a h323 endpoint …

2.- You enabled Service Advertisement Framework, Call Control Discovery between your Cisco Unified Communications Manager clusters. You see remote extension as learned DN patterns, but calls are unsuccessful. Which two causes of this issue are likely? (Choose two)
A. Pattern is not defined in hosted DN configuration.
B. Enable SAF is not in SIP trunk configuration.
C. Call Control Discovery partition is not assigned to your Calling Search Space.
D. Enable SAF is not set in H.323 trunk configuration.
E. Advertising Service is blocking pattern

CE

3.- You have configured a new MGCP gateway on your Cisco Communications Manager servers but the endpoints are shown with status “None”. What are two possible solutions for this registration issue? (Choose two)
A. Ensure that you have configured the ccm-manager call-agent command with the correct Cisco Communication Manager server address or hostname.
B. Activate the MGCP Feature service on all call-processing servers in the cluster.
C. Enable the endpoint voice interface for backhauling in interface configuration mode with the isdn bind-I3 ccm-manager command.
D. Ensure that you have configured the mgcp call-agent command with the Cisco Unified Communications Manager server address or hostname.
E. Configure the voice-VLAN interface of the MGCP gateway with mgcp-gateway voip interface command to set the source IP address of the MGCP packets correctly.

here i am not 100% sure but from logic it have to be CD because:
A this command is not available
B never seen such a service
E never seen such a command

thanks @cyberknock do you have other questions?? please share

i only have the 248q like everyone

@cyberknock
can you please send 248q to me?
ricky.maverick.1234 @ gmail.com

Hi All,
any updates for valid dumps 300-080?

1.- Some of your users report issues when they are dialing extensions located in other branch offices. Sometimes the calls are set up successfully and sometimes users experiences problems during call setup. Which two reasons for the issue are true? (Choose two)
o The remote branch experiences WAN link outages and there is no Forward Unregistered Internal number configured for the remote directory number.
o The Partition that contains the called extensions is not assigned to the line or deice CSS of the calling users.
o The called extension is used only on a device profile for extension mobility and the user has been authenticated to a second phone in a different branch so the calls are delivered randomly to only one of the phones.
o Not enough bandwidth is available between the two locations and Automated Alternate Routing is disable on the cluster.
o A firewall rule blocks traffic between the branch offices so the call setup cannot be completed.

2.- An engineer configured Cisco Extension Mobility for a user. The user can log in to the profile but notices that the extension is not correct. Which component should the engineer check first to verify the user extension?
o SIP Profile
o Device Profile
o Phone Service
o UC Service
o User Profile

what do you think guys??

1.- Some of your users report issues when they are dialing extensions located in other branch offices. Sometimes the calls are set up successfully and sometimes users experiences problems during call setup. Which two reasons for the issue are true? (Choose two)
x The remote branch experiences WAN link outages and there is no Forward Unregistered Internal number configured for the remote directory number.
o The Partition that contains the called extensions is not assigned to the line or deice CSS of the calling users.
o The called extension is used only on a device profile for extension mobility and the user has been authenticated to a second phone in a different branch so the calls are delivered randomly to only one of the phones.
x Not enough bandwidth is available between the two locations and Automated Alternate Routing is disable on the cluster.
o A firewall rule blocks traffic between the branch offices so the call setup cannot be completed.

2.- An engineer configured Cisco Extension Mobility for a user. The user can log in to the profile but notices that the extension is not correct. Which component should the engineer check first to verify the user extension?
o SIP Profile
x Device Profile
o Phone Service
o UC Service
o User Profile

Not 100% sure by the first one

Hi Guys,
Can anyone please share new Cisco books for collaboration modules.

ricky.maverick.1234 @ gmail.com

Hi,

Can somebody help to clear this?

You discover that a CCD client is failing to learn patters with RTMT. Which two actions can you take to troubleshoot the problem? (Choose Two)
A. Verify that SIP trunk between Cisco Unified Communications Manager and the Cisco Unified Presence Server is configured correctly.
B. Verify that the trunk is selected for the CCD advertising service.
C. Verify that the trunk is selected for the CCD requesting service.
D. Verify that EIGRP topology information is available to the SAF Forwarders.
E. Verify the SAF configuration.
Correct Answer: CE <– but i think this is not true

You cannot configure a CCD Trunk on requesting service, the trunk is configured on advertising service.

Verify SAF configuration, is not right i think.

In my opinion BD are the right ones, but not sure

cancel that CE is true, i was a little bit confused this morning 😉

@cyberknock
can you send me the vse 248q file please
{email not allowed}

@cyberknock
can you send me the vse 248q file please
shady.mahmoud992 at gmail dot com

sorry guys i will not send any questions, i have downloaded my pdf directly from this thread …. please search for it

42. Users on a Cisco Unified Communications Manager cluster report that they receive error “Login Unavailable (23)” when they try to log in to Extension Mobility. Which reason for this error is true?
a. User has no Extension Mobility profiles assigned
b. User provided the wrong UserID or PIN
c. The given user ID is not found in any of the remote clusters
d. Phone is not subscribed to Extension Mobility phone service

43. Which command is used to display information for active connections that are controlled by the Media gateway Control Protocol?
a. Show mgcp run
b. Show mgcp endpoint
c. Show mgcp connection
d. Show mgcp statistics

48. Refer to the exhibit. In this CUCM dial-plan, a localized translation pattern 9.1[2-0]XX[2-0]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. The translation pattern is used to globalize the Users dialed digits followed by matching a \+1 Route Pattern as seen in the exhibit. Users with DeviceLines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678300 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
a. Route Pattern does not have “Urgent Priority” checked
b. Translation Pattern does not have “Urgent Priority” checked
c. Translation Pattern has “Provide Outside Dial Tone” checked
d. Route Pattern does not have “Allow Overlap Sending” checked
e. Route Pattern Call Classification set to OffNet

63. Users are reporting intermittent poor audio quality on VoIP calls. Which configuration area requires troubleshooting?
a. Network QoS
b. Phone setup
c. Call routing
d. Media resource

@cyberknock ok but dodn’t even ask for the updated question any more OK :@ :@ :@

2018 latest ccna dumps http://cciedump.spoto.net/rs-ccna.php

@Tony my answers

42.- C
43.- C
48.- B,D
63.- A

Please help me with this one;

Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
A.- “KeepAlive_Timer” parameter in jabber-config.xml file
B.- Unified CM Device Assigned SIP Profile “Timer Register Delta”
C.- Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
D.- Unified CM Service Parameter “Station KeepAlive Interval”

@ Robert, Thanks alot Bro… I have another below…

@Reoni, my answer is C

70. Refer to the exhibit. A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed in the exhibit. The service is configured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”. Which configuration requirement supports Cisco EMCC and avoids this error condition?
http://172.16.1.1:8080/emapp/EMAppServlet?device=#DEVICENAME#%EMCC=#EMCC#
a. The user must associate a device profile
b. The Cisco IP Phone Service Configuration for Cisco EMCC must set the enterprise subscription
c. The given user ID is not found in the remote cluster

d. The device must be subscribed to Cisco EMCC Services

Amigos dejo dos links uno para que puedan bajar el examen CAPPS ultima actualizacion de 186q y otro pdf con preguntas nuevas adicionales para reforzar el mismo.

Examen Actualizado:
https://drive.google.com/open?id=1VItmsHLMeZnoDHCTVdqCTfWwk4uPJ-kO

Nuevas Preguntas:
https://drive.google.com/file/d/1pLI5-cCqn6KGrZ2PDMNWL39xG0ts-syl/view

Deberia ser suficiente para aprobar.

Me comentan como les va.

@hig
Can you pls send me dumps at er.sumansandeep@ Gmail.com