Share your TVoice v8.0 Experience

Hi KS:

Thanks for sharing.

Can you rewiew 195Q Dump? maybe there are other questions that were in your exam:

For you question about C-Series TS , Can you check “http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc4/api_reference_guide/codec-c60-c40_api_reference_guide_tc41.pdf” if the debug output was in your exam is in this link.

Regards

Hey Pablo, can you share the 195Q dump?
thanks 😉

@Grace: please check but not for sure:

1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot the problem?(choose two)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk
2. System A company 1 is calling system B company 2.the call completes but onl audio and video are present on system A from system B .what are two possible causes?(choose two)
• An access list is blocking video and audio somewhere in the video and audio path between system A and system B
• There is a firewall in the path that is blocking audio and video traffic from company 1 to company 2
3. What is the meaning of this alarm snippet CCM_CALLMANAGER-3Endpoint Transient Connections?
• The device was misconfigured
4. After you deploy SAF in a mega cluster and verify that TCP port 5050 is open you notice that SAF connections are failing .which two functions must you check to troubleshoot the problem?(choose two)
• Cisco UP XCP Router service
• Cisco AXL Web service
5. Which two statements about software MTP devices are true if the services are enabled on the same server ?(choose two?
• When you configure and reset the MTP the changes are applied immediately to active calls
• The RTMT can monitor the number of registered and in use MTPs
6. Cisco TelePresence system Ex90 A and Ex90 B are in a call. Ex90 A tries to call Ex90 C. when the call is dialled Ex90 B is put on hold Ex90 A and EX90 C are connected but there is no merge button on the touch panel. What is causing this issue?
• The multipoint system key is missing
7. You install a second Cisco TelePresence PrecisionHD 1080p camera on your C-series codec. But you are unable to control the camera .what should you do to fix the issue?
• Order a VISCA cascading cable from the Cisco which connects the first camera to the second camera
8. A Cisco Unified manager call trace ,which string indicates an intrasite call?
• OutsideDialton =(1)
9. Users are complaining of problems when they make SIP calls by dialling URIs .to help users complete calls , what must you do?
• Adjust the URI lookup to case insensitive
10. Where do you configure the phonebook synchronization for an endpoint that is registered to Cisco VCS?
• In the Cisco TelePresence Management suite under Administration >provisioning
11. You implement multiple registrars for SIP trunks for the Cisco Unified Border element to ensure redundant PTSN access, you receive an error that indicates that the registration server is invalid. Which two commands correct the problem?(choose two)
• Registrar 1 dns:cisco.com expires 180
• Registrar 2 ipv4:1.1.1. expires 360
12. The CLI command utils dbreplication reset all was run on a Cisco Unified Communications Manager, however , replication failed to restart . which courses of action should be taken to resolve this issue?
• Issue the CLI command utilis dbreplication cluster reset
13. When you troubleshoot call connection problems in an H323 gateway, which command allows you to verify the allocation of DSPs?
• Debug vtsp session
14. A user takes a currently registered IP phone from one office to another and just called you to inform that the phone does not work in the new location? which three things should you check to resolve the issue? (choose three)
• Make sure that the device pool is assigned to device mobility group
• Make sure that the physical locations are properly assigned under device pools
• Check whether the phone is registered under a different MAC address
15. A user is trying to call a mobile phone using the number 847885341 where 8 is the prefix to call of net numbers. Calls to mobile phones have worked in the past, but now the call does not work .which two areas should you check to resolve the issue?(choose two)
• Verify that the PTSN line is connected to the Cisco Unified Communications Manager
• Verify the pattern ,route list and route group
16. An end user at a remote site is trying to initiate an Ad Hpc conference call to an end user at the main site. The conference bridge is configured to support one codec. The remote end user receives an error message on the phone “cancel computer conference call”. What is one cause of the issue?
• The remote phone does not have the conference feature assigned
17. Which two precautions are required for a Cisco 9900 IP phone to successfully register with Cisco Unified Communications Manager?(choose two)
dont know
18. Which two items are displayed on the endpoint registration verification page in Cisco VCS?(choose two)
• Device type
• Endpoint names
19. During a conference that is hosted on Cisco TelePresence server .which two circumstances determine that a participant do not have video but they do have audio?
• No free screen licensing points are available
• No video points are available in a single Cisco TelePresence Server configuration
20. You have installed a Cisco Unified IP 8831 conference phone that is failing to register .which two actions must you take to troubleshoot the problem?
• Verify that the phones network can access the option 150 server
21. Cisco Unified Communications Manager configured to collect H 225 traces through the Cisco Unified Serviceability web interface. What do you use to download and view the trace files?
• Cisco Unified Real-time Monitoring Tool
22. A system administrator receives a help ticket stating that a remote office are unable to make three way calls. What should the administrator do in the Cisco Unified Communications Manager configuration to troubleshoot the issue?
• Check the media resources for a registered conference bridge and ensure that it is assigned to the right media resource group for that office
23. The link from your local Cisco unity connection site to another site has gone down. While troubleshooting you discover that the local gateway is unable to reach a DNS server. what action can you take to re-establish the link?
• Restart the connection manager services on the local gateway
24. Which two statements about software MTP devices are true. If the services are enabled on the same server?
• When you configure and restart the MTP the changes are applied immediately to active calls
• The RTMT can monitor the number of registered and in use MTPs
25. Which alarm string purges all learned patterns from the Cisco Limited Communications Manager?
• CCDL learned pattern LimitReached
26. A remote offices uses VPN with the HQ office to register its phones for centralized management. The office has a local ISP gateway with PRI for calling and to support SRST on the Cisco Unified Communications Manager . a device pool is created for this site with media resources that are local to Cisco Unified Communications Manager .a SIP trunk that requires MTP connects to the gateway , users report voice quality issues when making and receiving calls. How do you resolve this issue?
• Enable QoS on the remote office
27. Two Cisco Dx80 collaboration endpoints that support high definition video are registered to a Cisco Unified Communication manager in a single site deployment model, however the video that is displayed is pixelated and appears as sub HD .to enable the Cisco Dx80 to make high definition video calls, which configuration option do you check?
• Check the configuration in the Cisco Dx80 settings menu and enable high definition video
28. When you display SAF CCD in a remote location, you are unable to enable the SAF CCD service on a Cisco IOS based device. Which action can you take to troubleshoot the problem?
• Verify that Cisco Unity express is operational
29. You are receiving complaints of pixilation ,smearing and pulsing of video calls between two offices that are connected by a WAN. Assuming that QoS is implemented on the WAN which classification should you use to mark the video traffic according to the Cisco QoS baseline?
• AF41
30. ACME corporation is deploying a new voice gateway. The network administrator is trying to configure the ISDN PRI T1 cards. However the router does not accept the controller t1 0/0/0 command . the administrator sees this error message % invalid input detected at “marker” . to diagnose this problem which two commands should the administrator use (choose two)
• Use the show inventory command
• Use the card type t1 command
31. An engineer configuring Cisco Unified Communications Manager (CUCM) VERSION 10.0 . The office manager of a remote office sends a request to set up a new phone that contains the MAC address of the phone (QAFC00021AB2) and the extension (2324) the engineer manually creates a new Cisco Unified IP phone 7942 in CUCM but the phone displays ”registration rejected” when the user plugs the phone to the LAN. What should be done to fix this issue if auto registration is already enabled in CUCM?
• Check the enterprise license manager to ensure that the system is not out of licences
32. Which Cisco Unified Communications Manager tool can you use to troubleshoot issues with international calling?
• RTMT

@chacalak

It is in this forum page 8 or 7.

Regards

@KC:
Is it similar with your question?
https://supportforums.cisco.com/video/12537606/speaker-track-installation-sx80

https://www.dumps4download.com/642-427-dumps.html

https://www.youtube.com/channel/UCXjxd2pYBK_4Kf8-nj3BUhw/videos?sort=dd&view=0&shelf_id=0

Hi guys,
Help to answer plz.
Phone from Cluster A call cluster B but fail:
a. The CSS on A SIP trunk misconfig
b. A missing route pattern to B
c. The CSS on B SIP trunk misconfig
d. B missing route pattern to A
e. Translate pattern on A
f. Translate pattern on B

Hi Minh:

Almost option could be the correct answer, for example:
CSS on A ST: If you dont have the corrects CSS you dont reach the ST
CSS on B ST: in the CCS on ST on B site are wrong, it´s imposible to reach the phone B
Missing RP on A: if you dont have a RP wit ST on A side, it´s imposible to reach ST on side B so impossible to reach the phone B.
TP on A and TP on B: if you have a TP that transfor the DN of B, maybe we dont reach the phone B

So my friend maybe the question must be more specific. ( It´s a question in 300-080 exam?)

Regards

@Pablo: Yes, it in 300-080 exam
I found this link about this issue:
http://git.net/ml/voip.cisco/2005-10/msg00398.html
Phone A will use Route Pattern first, than next B SIP trunk will use CSS
Answer B,C, right?

I find someone as these question, anyone know the answers?

1. A engineer configured a SIP or Intercluster trunk from Chicago to Toyko. The users in Toyko can call Chicago, but Chicago users are unable to call Tokyo.
2. A user successfully login to Extension Mobility, the phone rebooted and reset successfully. What
caused this to happen.

@ Minh
The link you provided to the speaker-track-installation
https://supportforums.cisco.com/video/12537606/speaker-track-installation-sx80
is the closest thing to the exam question i could find. The section “Logs” output on that page resembled the question. To restate the question, i believe it was something like, “What does the output of this C-Series Telepresence debug show?” Answers were Mic and Speaker Registered, Trackpad Registered, Camera Registered, Speaker Track registered. So because of this output I believe Speaker Track registration would be most likely. It is amazing how little I could find on this. Thanks @Minh for this link.
@Pablo, the link you sent about C-Series TS in the .pdf did not have any output that resembled the question. Thank you anyways.

Minh’s question dump above has a lot of questions from my dump. I have gone through and tried to verify if the answers on my dump are valid and i found a lot of inaccurate answers. (so i was gping in to the exam handicapped.)

5.Which two statements about software MTP devices are true if the services are enabled on the same server? (choose 2) I found on Cisco documentation that a reset or restart do NOT affect active calls. But it does state that running the IP Voice Media Streaming Application can affect performance of CUCM if run on the same server. I have revised my answer bank to reflect the answers to be “The RTMT can monitor the number of registered and in-use MTPs. and The Cisco IP Voive Media Streaming Application can reduce the performance of the Cisco Unified Communications Manager if it is installed on the same server.” Please verify yourself if you are unsure.

12. I have mentioned before that the “utils dbreplication …” has like 3 questions about it on the test. So i did some looking and the question, “The CLI command utils dbreplication reset all was run on a Cisco Unified Communications Manager, however , replication failed to restart . which courses of action should be taken to resolve this issue?” stated here I believe the answer should actually be “Issue the CLI command utils dbreplication clusterreset all” instead of the “Issue the CLI command utils dbreplication reset” Documentation shows these two commands (reset & restart) almost interchangeably, but it says to use the cluster reset to completely clear out the DB and rebuild it for the whole cluster and states it as a last resort. i think that is what they are asking for.

15. the answer “Verify that the PTSN line is connected to the Cisco Unified Communications Manager” always bugged me because no PSTN line EVER connects directly to CUCM, it uses a gateway, but that was the answer on my dump. My dump asks for 3 answers, so i have the router pattern, route list… answer, and “Verify that the Cisco Unified Border Element is running. and Verify that the connection to and from the Cisco Unified Boarder Element is good.” The latter being what i think was on the actual test.

16. I don’t have this question with all of the other answers, but this doesn’t sound right to me. They usually refer to Conference Resources, not Conference Features, because Conferencing is not a feature to be activated, it is an event that requires resources. If you can provide the other answers, maybe we can confirm your answer.

24. see #5 – same question

26. A remote offices uses VPN with the HQ office to register its phones for centralized management. The office has a local ISP gateway with PRI for calling and to support SRST on the Cisco Unified Communications Manager . a device pool is created for this site with media resources that are local to Cisco Unified Communications Manager .a SIP trunk that requires MTP connects to the gateway , users report voice quality issues when making and receiving calls. How do you resolve this issue?
The answer stated is “Enable QOS” but how would QOS fix voice quality issues if the call is between the remote gateway and the remote phone. Another answer that might be better is the “Assign an MTP that is local to the remote office to the device pool that is used by the phones.” As is, the call would have to be routed across the WAN to the MTP for the remote SIP trunk. Enabling QOS might help, but adding a local MTP resource would be better IMHO.

32. Which Cisco Unified Communications Manager tool can you use to troubleshoot issues with international calling? -> This question I did not have on my bank, but WAS on the test. Pablo said he thought this should be DNA, not RTMT. I answered RTMT on the exam, but I could never independently verify this. I am going to use DNA, but please make your own judgement call.

I hope that helps some. Scheduled for exam on Tuesday. I will update with anything we have not gone over. Please update if you find anything between now and then.

Hi KS:

Thanks for sharing the good information.

I agree with you with all you answers.
26. For me should be Assign an MTP that is local to the remote office to the device pool that is used by the phones.

I will take the exam on next friday, please if you could share the experience of your exam,
I would be pleased.

Regards

Hi guys, please share experience of your exam, because I will take the exam too.

Hi KS: i agree with almost your answers.
But with question 12: it seem “utils dbreplication clusterreset” is right answer.

@all: someone already post he got 02 question below in actual exam, please show the answer if you have.

1. A engineer configured a SIP or Intercluster trunk from Chicago to Toyko. The users in Toyko can call Chicago, but Chicago users are unable to call Tokyo.
2. A user successfully login to Extension Mobility, the phone rebooted and reset successfully. What caused this to happen?

@Minh

Question 12. I believe you are right, ““utils dbreplication clusterreset” not ““utils dbreplication clusterreset all”. I think i read your answer wrong, i thought you had indicated the “utils dbreplication reset”. My bad.

#1 I believe the answer was something about SIP route patterns. Remember i failed the test, so maybe that is proof that this is NOT the answer, lol.

#2 new question sounds familiar. The answer would be the phone locale was updated. I don’t remember the wording of the answer, but that is what is happening. This is when something like the language of the phone is updated when roaming. So if you are using extension mobility in Germany, but your extension mobility profile shows a locale of USA, your phone has to reboot to take that basic language change.

I’ll let you guys know how Tuesday goes. Thanks for your input and help!

Hi Minh:

Could you post the answer option about the two new questions?

Regards

Hi Pablo,

I dont have the list choice answers.

So may be someone just took actual exam could provide it.

Hi guys, any update for valid dumps?

Hi KS, Pablo,

Have you got any comment all other answers in my list?

Please advise.

examdumpYou can free 642-467 exam Braindumps download from here!

https://www.realexamdumps.us/cisco/642-467-braindumps.html

Hi guys, passleader 195Q still valid for exam 300-080 or not?

Hi @KS:

How was your exam?

Please can you share your experience.

Thanks

Failed 848/860. So this is failure #3. I have 3 test banks and i took a Global Knowledge self-paced study class. I am confident in all of the answers that I have seen before, but about 1/3 were new to this test. about 1/2 were from banks and the remainder were not on banks, but I have seen in previous tests. I am going to take a break from this one for a while. Most of the questions are so trivial that you HAVE to have a good test bank to pass. I really wish they would make these exams about the material that someone would actually use. I wish i could be more help, but i couldn’t really memorize 20 new questions/answer choices. It was too much and i used all but 4 minutes of the duration. I wish you better luck.

The Passleader 195q dump is the best still. That will get you about half of the questions. and after confirming answers on it independently, they are pretty much 100%. We just don’t have a full bank.

Cheers,

@KS:

Sorry man, I´ll take tomorrow my first time this exam, I´ll share my experience.

Regards

Hi @KS:
How was your exam?
Please can you share your experience.
Thanks

Hi @Anonymous

How was your exam?
Please can you share your experience.
Thanks

Hi All:

Pass the examm with 878, but It was really dificult only 30% of questions in 195Q.

Many questions about ILS, CCD, Video.

Good luck .

New Update: My student passed today. Latest 100% VALID Exam Questions Dumps at below page. PDF version and Working VCE player also included in package.

Download at below page:
http://rebrand.ly/ccnac9fa4

I am still looking for additional questions on 300-080 exam, help please

Hi guys,
Anyone has the 300-080 dump ? Can you please share to andre.salgueiro @ gmail. com
thanks!

Hello I just passed 300-080 exam with 950/1000 just because of certifications desk:

https://www.certificationsdesk.com/cisco/real-300-080-exam-questions.html

Hi Guys, any update for 300-080 dumps?
still looking for additional questions on 300-080 exam.

Hello, anyone to share latest experience with 300-080?

appreciate

How does cách sử dụng gel titan figure out?
Titan gel order
The unique means delivered the potential gist regular if obtained with rude methods
or put-upon on an irregular basis. Thanks to the Bodoni methods of making the take out and its combination with many
innate dynamic substances, the creators of “Titan gel” managed to attain an telling leave! https://titan-gel-vietnam.pro/

Sample Question 1:
Which two types of Cisco Unified Communications Manager trace files contain Call Processing information that is helpful for troubleshooting outbound and inbound calling issues? (Choose two)

Options
A. Cisco Unified Communications Manager syslog trace
B. Cisco Unified Communications Manager Dialed Number Analyzer trace
C. Real Time Monitoring Tool Processes trace
D. Cisco Unified Communications Manager SDL trace
E. Cisco Unified Communications Manager Log4Jtrace
F. Cisco Unified Communications Manager SDI trace

Correct Answer: D, F

301 Questions With Answers

https://www.dumps4download.com/642-427-dumps.html

is this dump valid?

hello @Emma. Do you have and can share this 301q dump with us? If yes, can send me at csccosta at msn dot com. I’ll be very very grateful to you. I’ve tried the 300-080 exam one time but didn’t pass. I wont spend more money without have sure I’ll can pass.

Best Regards.

Hello @kakacisco
When did you take your attempt?
Can you tell how many of question from your exam wasn’t in 195q dump?
About what theme was these new questions (VCS, TMS, SAF….)?

hi @Anonymous … had a variety of themes as: MTP issues, CCD issues, echo problems causes, dbreplication and so. There are some few questions I’ve noted after the exam. My attempt was in Apr 4th.

What can cause a echo in a call (select two):
Delay
Bad phone
Wiring
Network issues

Wich router IOS CLI command could be used for troubleshooting a MTP issues:
I believe the correct answer is: show sccp connections

What can cause a CUCM issues when registering in the saf forwarder?
no route pattern configured
no pattern direct number active
bad username and password

The extension mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?:
User profile
Device Profile 
And others

an administration ever replace a MAC-ADDRESS but even after change, the mac address of device is show the old address:
an administration don’t have a full permission for this change
has a database replication issue between cucm publisher where the administrator is righting the configuration and subscriber server where the IP Phones is registered

One question has a scenario look like this:
PHONE A REGISTERED ON CUCM PUB >>> GW >>> PSTN >>> PHONE C

PHONE B REGISTERED ON CUCM SUB >>> GW >>> PSTN >>> PHONE C

PHONE A CAN REACH A PHONE C BUT PHONE B NOT

WHAT THE MAIN CAUSE:
PHONE A IS A SOFTPHONE
PHONE B IS A SOFTPHONE
DATABASE REPLICATION

after perform a cisco cli commando on publisher utils dbreplication reset all, wich command to see report status and replications tables status:
I believe is one of these two commands, most the utlis dbreplication status, I will try this one in the next try:
utils dbreplication status
utils dbreplication runtimestate

Hello @kakacisco
Thank you for info. It was very useful.

Updated dumps for the 300-080 exam are now available on https://www.itlibraries.com/product/300-080-3/
Includes all the new questions added in April and May.
PDF and VCE that works with A+ Player and VCE Player.
It took a while to update it but it out now so enjoy it.

Pass it while it lasts and support us 🙂

Hello @kakacisco
Can you said, did you face in your exam the questions mentioned in KS’s post (page 10, from May 11th, 2017)?

Hi everyone,
any update for 300-080 dumps?
Thanks

hey,

any update? i need a valid dump to cert my ccnp. it is the last exam 😮

Visit this link to get some help to prepare for CCNA 642-427 Dumps. I’m Sure you can pass 642-427 exam in First Attempt. https://www.dumps4download.com/642-427-dumps.html

Hi,

sorry for putting this in this thread. Does any one have Cisco CCNA Collaboration 210-060 CICD and 210-065 video dumps. I tried hard to find one but still no luck.

Thanks a lot in advance.

@tinki.
U should look into the ICOMM comments.
U can get the pdf and vce and new Q from the comments (dismiss all da spamm).

Passed today,
The 195q dumps are valid.
I got them for 35$ from itlibraries, if you have the PL ones they are the same.

Hello, Pat

My congratulations. Good news.

Can you please answer, how many questions on exam wasnt in PL 195 dump? Did you face any D&D questions on exam? About what theme was new questions (CUCM, SAF, VCS, TMS, CUC……)? Did you use any additional info or only PL195?

Hello. Passed today. Got nearly 15 – 20 questions from PL195 file, 2 – 4 question from old 262q dump (64-427), all questions described in kakacisco post. All other new.

Aloot of question about SAF (they give trace – you need to said the reason). One question about cross cluster extension mobility. One obout problem with jabber registrtion. Only few question about Unity Connection (all from dumps). No questions about TMS. allot of questions about torbleshooting issues with trunk beetween systems (cucm – vcs – gateway). No D&D questions.

congrats guy … do you remember some of the new questions ?? could advertise me about something new? I need to try again in the next month. If you prefer, send me for email – csccosta at msn dot com

Regards!

hi all,
I passed 300-080 on 6/25. I used 195q to prepare along with online reading about TMS, SAF, Device Mobility. Only 40-50% of the questions were from 195q. Many questions about SAF, jabber registration, Unity Connection. 70q for 75 minutes which was very tied.

Good luck everyone and keep up with this forum to help others.

Hi @ccna collab.

Do you remember some questions that is not covered by 195q?

I’m studying a lot of SAF, TMS and any others … I’m going to schedule the exam this week.

If you remember something, can send me at csccosta_at_msn_dot_com

Best Regards!

Hi kakacisco,
not really, one of the question was about EMCC asking how to you set the home cluster for a user and that is by checking Home Cluster checkbox in the End User account.
questions that are not in the 195q bank are not really difficult if you have some experience by working with UC, however the challenge I see is the number of questions (70) for the time (75mins) being very tied. If you are not familiar with the question and have to read slowly to understand, that has a negative impact on time management.

hope this happens

Thank you so much @ccna collab … yes, I have a large experience working with UC, almost ten years hehe. As my country we don’t speak english natively, we have a adaptative extension of time and it’s very helpful.
I will try tomorow and hope share good news soon.

Regards!

kakacisco good luck 🙂

Anyone have experience with the order of Exam CCNP-Colla ?

hi @Lörres … if you’re talking about about an exam order … firstly you need have a CCNA R&S and then get a CCNA Collab (210-065) exam to be able to start in CCNP-Collab … regarding CCNP Collab exams, the most common order is: 300-070, then 300-075, then 300-080 and finally 300-085 … but you can take in any order. I did this sequence exam order: 300-075 – 300-070 – 300-085 and tomorrow I will try 300-080 for second attempt.

Hi kakacisco,

Please update, for your exam result, 300-080 it’s just my latest exam.

Thanks

Hi kakacisco thank you for detail answer.
I have done the following tests. CCNA R+S, CCNA COLLAB (last week)
I will start with 300-070 … it’s a long way to finish ccnp colla. :()

Hi @Lörres … good luck and welcome to Collaboration’s world hehehe.

Hi kakacisco.

Help to advise about 300-080. Any updated ?

hello Minh,
Get valid free 300-080 from Dumps4downlaod.co.in and prepare your exam in just 24 hours. Dumps4download is the leading organization which are providing 300-080 real exam sample questions which helps to pass your exam in good marks. https://www.dumps4download.co.in/free-300-080-practice-questions.html

hello everyone … I had passed in my last CCNP Collab exam – 300-080!!! But wasn’t easy!

Don’t believe in these announcements of dump … are all invalid for this exam.

Pay attention studying Cisco SAF (specially IOS configurations – saf forwarder and some client registration errors – cluster labels, etc.) / ILS (has one question talking about an error connecting with peer and this connection is broken due a remote peer never answers) / EM (has one question where users are complaining that cannot log in ther phones after a cucm upgrade to version 10.5 – has answers options talking about regenerate a Tomcat Certificate on publisher, or in all cluster servers, restart publisher server or all server and so, I encourage to study this theme. Also has another question regard EM saying something about configuration of the EM service … and showing the EM service url … decorates this url.

Has one question about quality video multipoint talking about a MCU interoperability between one call multipoint with CUVC and CTS envolving CTMS and so … I had answered the option that says the quality is reduced to CIF as says Cisco TelePresence Interoperability documentation.

Has one question that shows a Cisco Jabber registration log error due a time register delta expired then the correct answer is it. Need to change a timer register delta to keep registered as well.

Another question is about: where can you see a Cisco CUCM cluster dbreplications status? I answered these options: CLI / RTMT / Reporting Tool.

Another one says the end users cannot login at EM after CUCM upgrade to version 10.5. Is necessary to regenerate Cisco TomCat certificate (on all cluster servers), restart the Cisco Tomcat Service and restart the TFTP servers.

From 70 questions of this exam, only between 15 – 20 are from 195q dumps.

Good study and good luck to everyone!!!

congrats kakacisco, only have ~20 question from the dump is bad new.

Hi @Kakacisco,

can you share about study material for 300-080 exam? I want to take this exam.
whats score you get for 300-080 exam?

Thank you

thanks @Minh

Hi @Albert … I’ve been focused on topics aren’t usual for us day by day for example ILS, GPDR, SAF and so. Studying via Cisco datasheet, SRND and technical documentations. I got 880 points when the mininum score is 860 … are 70 questions at this exam.

Pay attention at the period of exam, the exam time need to be administered having in mind are 70 questions. I finished in the latest minutes.

@kakacisco

Congrats Man , I see u really did good job. Best of Luck.

Hi guys, exam 300-080 already update dumps to 221Q
Please confirm 221Q it’s valid dumps.

Thanks

Hello Albert

If you have the 221 Dump , plz share to tarek.elkady.90 @ gmail .com

Hi! I was curious to know if setting up a blog site such your own: is tough to do for unskilled people? I’ve been wanting to create my own website for a while now but have been turned off mainly because I’ve always assumed it demanded tons of work. What do you think? Thanks!
nike air max dámské http://www.nike-airmax2017.cz

Hi Albert,

Please share 221 dump to {email not allowed}. Thanks

Hi Albert,

Please share 221 dump to contactronkybabe2001 @ gmail .com

Hi brothers, any recent taker of this exam 300 – 080? Please share 221 dump and your exam experience. Cheers!

@Ronky
Hi Ronky, sorry brother i haven’t 221 dump

@A_Team
I’m still waiting for 221 dump valid or not before take exam.

Thanks

Besides, part of that new 248Q 300-080 dumps are available here:

https://drive.google.com/open?id=0B-ob6L_QjGLpZ0owZW9faW9hbzQ

Best Regards!

Rod RI,

Could you please send me 248q yy.go31 @ gmail com

Rod RI — 248q dump on google drive was missing some question…. Can you upload it again or anyone that has a copy and let us check what are the new question & answer please

Hey Guys

Could you please share the latest dump..

Thank you looking forward to your success! cheers!

GUYS
GUYS
GUYS

Any new on this exam 300 – 080? Please share 221 dump and your exam experience.

Hi all, Iam looking for a nice forum, for a long time with no spammessages but i cant find one. I build a new forum http: // ccnpcollabcisco . forumprofi . de / for share experience about the exams in the CCNP Collaboration.
At this forum i will share tomorrow the newest 186q passleader dumps from CAPPS. In this forum there will be no spamuser, all user must be approved before they can start.
To be aproved send your Certificate Verification number from the CCNA Collab. This is necessary to check that you want to do the CCNP Collaboration and you are no spammember from any website.
I hope we can see you at soon at our forum.

Team any update here?
Team any update here?
Team any update here?

any update for valid dumps?

anyone recently used the passleader 300-080 dump to pass ?
is it Valid and sure to pass with it ?

can someone share me 241Q 300-080 to schichri93 at gmail com ? thanks to all.

Hi guys, any update for 248Q dump?
I need exam 300-080 to become CCNP Collab

any recently taker of this exam?

@A_Team, I think still no update from this exam, so bad

Hi all, for this question,

Cisco Jabber registration log error …
Warning Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.

Which configuration item needs to be adjusted to correct this condition?

A. UCM Device Assigned SIP Profile “2XX Expiry Timer”
B. UCM Service Parameter “Station KeepAlive Interval”
C. UCM Device Assigned SIP Profile “Timer Register Delta”
D. “KeepAlive_Timer” parameter in jabber-config.xml file

Can anyone advise which one is correct?

Thanks

Another question Call from phone 1 (88541234), which is registered to Cluster A, are failing to phone 2 (84431234), which is registered to cluster B. The exhibit is from cluster B.

What are the two possible root causes of this problem?

SIP/2.0 404 Not Found
Via: SIP/2.0/TLS …..
From ; tag=….
To: ; tag=…
.
.
CSeq: 1000 INVITE
.
.

A. CSS on Cluster A SIP Trunk is mis-configured.
B. CSS on Cluster B SIP Trunk is mis-configured.
C. Cluster A is missing a route pattern to reach cluster B
D. A translation pattern is mis-configured on cluster B
E. Cluster B is missing a route pattern to reach Cluster A

Which one or two are correct?

Very Happy with Pass4SureKey Team they work brilliant provide helpful stuff to students i recently pass my 300-075 – Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam which consist on 383 questions which complete the each aspect of this course get now from this landing page https://www.pass4surekey.com/exam/300-075.html

@Michael —> from where you get these questions?

@A_Team, from the PassLeader 300-080 dumps (248q~~~NEW VERSION~~~)

@Michael can you share the dump?

anyone has a copy of 248q dump? Please send it to me I want to verify the question and answer ASAP yy.go31 @ gmail COM

hi Michael,
could you share dumps 248q ? my email is minhlh81 @ gmail COM
thank you so much.

Hello Did anyone try the passleader 300-080 248 Qs Passleader dump ?
can you share your experience ?

@Michael can you share the dump? to this forum?

Hey Guys,

Planning to buy 300-080 248 Qs PL dump, but want to make sure that it is valid first.

can anyone help to say if it is valid or not.
Thanks.

Dont spam. Dont dumps are more then 50 % valid.

any update for valid dumps?