Share your TVoice v8.0 Experience

Study material was this site, I did scroll back 10 pages and filtered all the questions that were shared. Rest is ‘hands on’. Here are a few more I can recall now:

Which troubleshooting tool would you use for tracing calls as they are happening?
-RTMT;

Partition can be assigned to?
-Directory number

Question with exhibit about HQ and BQ. HQ to HQ speak g711, BQ to BQ speak g711. HQ to BQ speak g.729 but fail. What should be done?
-Ans: configure transc on the HQ MRG and add to the HQ MRGL
(always remember to put the DSPs closer to the origin);

EX endpoint is failing to register VCS why? (output of the configuration was screened)

Failed registration on the VCS why? /know how allow and deny list work on VCS/

How do you configure domain on VCS? Know the path exactly

How do you check the attributes of a video call from the web interface of an endpoint?

There was a question about Jabber and problem with registration. It was state explicitly that there is a firewall on the laptop. My answer was: SIP inspection is enabled on the local FW

How do you make the trace more detailed so you can see per hop translations (or sth like that/there was an exhibit with the service parameters/):
Ans: digit analysis complexity set to——>TranslationAndAlternatePatternAnalysis

Problem with EMCC what to do?
Ans: enable logical partitioning

dspfarm profile 1 transcode universal
Q: what means the universal command? Ans: any two codecs can be transcoded;

endpoints handled by TMS automatically change from reachable on LAN to behind the firewall status, which protocol you check? Ans: HTTP/HTTPS

Audio calls from a CSF device fail. Which command set likely resolves the issue?
Ans: bearer cap command with the channel tag

I did not have a single ILS question;

Good luck all

Thank you and congrats Barut!

Anyone passed 300-080/300-085 exam recently???

Please kindly share valid 300-080/300-085 dumps.

Thanks!!!

Anyone have valid dumps for 210-065 CIVND Exam ?

@Wanderer.

I have passed with 911 last week. I can share my document $25 dollars.

Anyone taken 300-080 CTCOLLAB recently?
Is spoto 143q shared by junjun still valid?

Hello all ,
Any one can you send me the spoto dumps 143q please !!!
my email : mh1475896(at)gmail(dot)com

Thanks in advance

@kaz can you send me the dumps in my email mh1475896(at)gmail(dot)com
Please

Any one can you send me the spoto dumps 143q please !!!
my email : mh1475896(at)gmail(dot)com

Thanks in advance

hello my freinds , can you send me the spoto ndumps with 143q for exam 300-080 in my email:
mh1475896(at)gmail(dot)com

Please !!!!!!!!!

hello
please not send the spam here , anyone have the dumps can share here.

hello

any one can send me the dumps for 300-080
in my email: mh1475896(at)gmail(dot)com

Please !!!!

Please more activity on this group

hello guys

any one can send me the dumps in my email : mh1475896(at)gmail(dot)com

Pleasee !!!!!

i have the exam this month

Hi huys . Any one have the valid dumps for 300-080 i can bought with you

Hi. Is it 300-080 248 exam for all still valid

@Higo . I need the dumps please !!!!

Hi guys, i have 100% valid spoto dumps. i have just purchased anyone interested in group buy, i will share the file for $30USD. please email on dannygonzopa ‘at’ gmail

I have CIPTV2 and CAPPS exam 100% valid dumps as well for $30USD each. not a dump provider just trying to see if someone can share the cost with me…

@Danny i am interested for your offert . Let me know the dumps 300-080 is valid and any one passed with them successful ( how many score ) . How many question in this dumps ?
Kindly

Hi salah, 162Q’s very valid dump from spoto just purchased will give the exam on Tuesday and share the result with all of u….contact me on email for more details dannygonzopa ‘at’ gmail ‘dot’ com….

Congrats!!! Passed both 300-080 and 300-085 recently!

There are few new questions in the 300-080, but many new questions in the 300-085.

I mainly learned the PassLeader 300-080 and 300-085 dumps, still valid for passing.

All new questions have been covered in the latest PassLeader 300-085 dumps.

p.s.

PassLeader 300-080 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpZ0owZW9faW9hbzQ

(284q~~~NEW VERSION DUMPS!!!)

And,

PassLeader 300-085 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpYzVWM3RBVFduNXc

(246q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

More:

PassLeader 300-070 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpd3liQ3hmU0VIdnM

(305q~~~NEW VERSION DUMPS!!!)

And,

PassLeader 300-075 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpSlBUZHQxc19EWHM

(459q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

@Danny
can you contact me on my email: mh1475896(at)gmail(dot)com

@Danny have you passed the exam ??

@Pedro had to reschedule for later this week, will let you guys know how it goes…

@Danny did you passed the exam ?

Hello guys , any one have the answer for this question.

which two items are displayed bu checking the vcs via status > registrations ? choose two
A. device description
B. endpoint mac adress
C. device type
D. endpoint name
E. device pool

@Pedro I passed bro with 9XX email me and we can chat..

PassLeader was valid.

Thanks for sharing!!!

Passed today with 9xx . Any one would the dump 100% valid .
Write your email here . I will contact you

@Khobine

please contact me on mail o m e r _ s h a k i l AT y a h o o . c o m

@khobine

Please share with me too
doraemon9078 at hotmail dot com

Hello!

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

@khobine lets send dump to lordarayend at gmail dot com

@Khobilne
please here my email
mohsin dot ebm AT gmail dot com

Please share my email sparkyme.87 at gmail dot com

umer/dorayaki/toby/moh/sparky… does khobine sent an email or he is one of the spammers? planning to take the exam this month…

@Khobilne
please share
my email kvzacc01 AT gmail DOT com

Hi @Khobilne

Please share to me, my email ludinugroho at gmail dot com

Thx

Just 20$ to Pass without any risk:
Save You Huge Exam Fee!!

Please follow below link to pass in first attempt.
The dumps are very stable good luck for all guys.
Only@20

Get DOWNLOAD Latest VALID Voice and Video New Dumps
210-060, 210-065, 300-070, 300-075, 300-080, 300-085, CCNA CCNP COllaborationLatest dumps
At below webpage:
http://rebrand.ly/ccnac9fa4

@Khobilne

Please share with me, email tomek1 at szczepan dot com

Thx

@Khobilne

Please share with me, email schichri93 at Gmail.com

thank you

Anyone know what the two answers for this question would be?

The exhibit shows the output of debug isdn q931. An inbound PSTN call was received by a SIP gateway that is reachable via a SIP trunk that
is configured in Cisco Unified Communications Manager. The call failed to ring extension 3001. If the phone at extension 3001 is registered and reachable
through the gateway inbound CSS, which three actions can resolve this issue? (Choose two.)

A. Change the significant digits for inbound calls to 4 on the SIP trunk configuration in Cisco Unified Communications Manager.
B. Configure the digit strip 4 on the SIP trunk under Incoming Called Party Settings in Cisco Unified Communications Manager.
C. Configure a translation pattern in Cisco Unified Communications Manager that can be accessed by the trunk CSS to truncate the called number to four digits.
D. Configure a called-party transformation CSS on the gateway in Cisco Unified Communications Manager that includes a pattern that transforms the number
from ten digits to four digits.
E. Configure a voice translation profile in the SIP Cisco IOS gateway with a voice translation rule that truncates the number from ten digits to four digits.
F. Configure the Cisco IOS command num-exp 2288223001 3001 on the gateway ISDN interface.

this one too?

All region, MRG and MRGL configurations are set to default values. The service provider supports only the G.711 codec. Calls from the IP
Phone 7965 to the SIP service provider fail due to a codec missmatch.
Which action should you take to make this call work (Choose two)?

A. Assign the transcoder to an MRG and MRGL but do not apply the MRGL anywhere
B. Assign the transcoder to an MRG and MRGL and apply the MRGL to the phone 7965
C. set early-offer support on CUCM to “Disabled”
D. Disable SIP eary offer on the CUBE
E. assign the transcoder to an MRG and MRGL and apply the MRGL to the SIP TRUNK
F. set early-offer support on CUCM to “Mandatory”

Hi guys, i have 100% valid spoto dumps for 300-080 CTCOLLAB, 300-085 CAPPS & CIPTV2 300-075. i will share the file for $30USD per exam. please email on dannygonzopa ‘at’ gmail, its 100% valid, no new questions. I have passed and many of friends have also passed.

@Danny, how many questions are on the 300-080 SPOTO dump?

@myheadhurts if you have the dump write your email here and i will contact you

@myheadhurts 162Q’s for the 300-080 exam…2 people gave the exam yesterday and passed no new questions asked.

@Kaka my email is dannygonzopa “at” gmail “dot” com

I have valid spoto Dump I will sell it for 10 $ contact me on umer.shakil 2005 AT gamil.com

@myheadhurts
q931 debug: AC
Region: BE

Suxx, reread q.
q931 debug have 3 valid answer: ACE

Hello!

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

Anyone kindly share the PassLeader 300-070/300-075/300-080/300-085 dumps collection?

Thanks in advance!

Hi!

Passed the 300-080 exam few days ago!

9xx/1000 POINTS!

Only learned that NEW PassLeader 300-080 dumps with 284 Q&As.

Still 100% accurate!

All questions were from PassLeader, valid enough for passing!

Trying the PassLeader 300-080 dumps ASAP, all guys!

Good luck!!!

@spoto dump valid

Thanks for sharing, did you pass the exam with this dump?

yes, I passed

@Spoto dump valid

thanks and congrats, im reviewing the questions and trying to correct some answers which they are not correct.

@Sam

which questions do you believe have the wrong answer?

@ spoto dump valid

Did you get any new questions.

In a Cisco Unified Communications Manager call trace, which string indicates an intrasite
call?
A. OutsideDialtone = [1]
B. cmDeviceType=[AccessDevice]
C. OutsideDialtone= [0]
D. OutsideDialtone-[2]

A or B ???

@Zak, i can’t for the life of me find any Cisco documentation that describes what each of these mean.

I believe cmDeviceType = intra
OutsideDialtone 1 and 2 = Inter

@spoto dump valid

Did you get any new questions ?

Congratulations!!!

Passed both 300-080 and 300-085 recently!

There are few new questions in the 300-080, but many new questions in the 300-085.

I mainly learned the PassLeader 300-080 and 300-085 dumps, still valid for passing.

All new questions have been covered in the latest PassLeader 300-085 dumps.

p.s.

PassLeader 300-080 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpZ0owZW9faW9hbzQ

(284q~~~NEW VERSION DUMPS!!!)

And,

PassLeader 300-085 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpYzVWM3RBVFduNXc

(246q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

What’s More:

PassLeader 300-070 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpd3liQ3hmU0VIdnM

(305q~~~NEW VERSION DUMPS!!!)

And:

PassLeader 300-075 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpSlBUZHQxc19EWHM

(459q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Very easy to pass. With a little Job expirience on CUCM/VCS, study the last 10 Sites of the Comment (as mentioned by barut) and the PDF from megaupload one Site back. But be aware of wrong Answers or a little differenes in the Questions.

You dont need to spend any Money for dumps.

@katschuka

Could you post incorrect Answers?

Hi guys, please let me know if spoto dump is valid…….need to know urgently exam is next week…thanks in advance……

Just failed 300-080 with 78 percent, passleader 284q ist NOT VALID. 60 percent new/different questions.

Many Expressway and H323 logs. No change if you are not regually troubleshooting on the console.

Failed! Exam has changed be careful guys i used spoto posted by spotovaliddump and failed 🙁

@BavarianDude is right 60% new questions….I have passleader and spoto posted on megaupload…..both dumps are now outdated…the questions were very convoluted……..need to practice Expressway in the lab thoroughly to clear this exam….

Sadly no Cisco press book…

sorry to hear that bavariandude and chena! honestly haven’t gone through the spoto pdf shared recently… but i have another vce file compiled mostly from marks4sure… can you share your email address bavariandude or chena? i will send the vce file that i have and maybe you can share if M4S is more valid?

I m already certified. One other guy passed on Jan 22 and My cousin passed today 300-080 with 9XX
i only shared this link with him posted by spoto valid dump on January 15
https ://megaupload.nz/ O5hc89qfb4/ 300-080_2018-12-15_4-43-57_pdf

Just remove the spaces in the URL

Good Luck

@moh

do you find any wrong answers in spoto dump? pls share.

https:// vceguide.com /which-call-control-model-does-mgcp-use/

barely missed my exam, i think pass leader has a some wrong answers, you just need to do some quick research on those.

@ Wanderer Please share VCE file with me omer _ shakil AT yahoo.com

@ntop
in fact i myself not appeared in the exam, but the URL i shared; having pdf file from Lab591, not from spoto. Both guys who passed told that 5 to 6 questions out of dumps and let me tell you both have 917 marks. One of them passed on 25th. They Prepared from this pdf, nothing else.

Hope it will help

the dump in megaupload is not valid…I failed with 8XX…just missed by a few points will…..at least 20-25 new questions….let me know if anyone has latest dumps…

@Ilyas

did you used the one MOH for spoto or 591lab questions?any new questions that you can recall from your test?

Taking the 300-075 from 459 question bank on 2/15. Has anyone taken this exam in the past 30 days

@zak & @myheadhurts
In a Cisco Unified Communications Manager call trace, which string indicates an intrasite
call?
A. OutsideDialtone = [1]
B. cmDeviceType=[AccessDevice]
C. OutsideDialtone= [0]
D. OutsideDialtone-[2]

C

(I am taking 300-080 exam tomorrow)

from Barut, it appeared in his exam:

8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)

from the dump that I use, answer is also – OutsideDialtone = [1]

@wanderer – and take that with caution, as we all know… dumps have correct questions, but answers are mostly wrong 😉
btw. just passed with 923… until next time… CaptainC over&out #livelongandprosper #goodluck

Congrats CaptainC! So most of Barut questions appeared also? what reviewer do you recommend based on your questions?

New Pass Leader 300-080 dumps (Feb/2019 Updated~~~313Q NEW VERSION!!!) now are available, here are part of 300-080 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 296
An endpoint cannot connect to a valid TFTP server during the registration process. Which two statements describe possible causes? (Choose two.)

A. The DHCP configuration contains TFTP server 66, but no DNS server is available.
B. The DHCP configuration contains TFTP server 150, but no DNS server is available.
C. No separate voice VLAN configuration on the switch port connected to the endpoint.
D. Cisco Unified Communications Manager CallManager services are not started.
E. Cisco Unified Communications Manager TFTP services are not started.

Answer: DE

NEW QUESTION 297
An engineer is troubleshooting an intersite call between two endpoints where calls are intermediately failing with the error message: “488 Not Acceptable Media”. Which option causes this error message to trigger?

A. The device pool contains more call processing agents in the CMG group than the endpoint can support.
B. MRGL contains more media groups than the endpoint can support.
C. A lower bandwidth is set in the location than the endpoint can support.
D. The hunt group contains more devices than the endpoint can support.

Answer: C

NEW QUESTION 298
You are troubleshooting an ILS connectivity issue. All clusters are set to “Use TLS Certificates”. Which certificates must be exchanged between Cisco Unified Communications Manager clusters?

A. Tomcat certificates between all nodes in all clusters.
B. TLS certificates between publisher nodes in all clusters.
C. Call Manager certificates between publisher nodes in all clusters.
D. Tomcat certificates between publisher nodes in all clusters.

Answer: D

NEW QUESTION 299
An engineer is analyzing an issue about system connection under Cisco TMS connection, where endpoints handled by TMS automatically change from reachable on LAN to behind the firewall status. Which protocol does the network engineer need to troubleshoot the network between managed device Cisco TMS?

A. SDP
B. XMPP
C. FTP
D. HTTP

Answer: D

NEW QUESTION 300
Which two types of call causes the user to hear the reorder tone? (Choose two.)

A. call to a number that is working but is unlisted
B. restricted call
C. call using a non-Cisco phone
D. call to a number that has been blocked
E. unrestricted call

Answer: AB

NEW QUESTION 301
Replication is failing between the Cisco Unified Communications Manager Publisher and Subscriber servers. In which two ways can you verify the database replication status? (Choose two.)

A. TRACERT
B. CLI
C. APIC-EM
D. PING
E. RTMT

Answer: BE

NEW QUESTION 302
An engineer is investigating voice quality degradation on calls passing through a particular SIP gateway. To gather the necessary information, sample traffic captures are taken. Which information in the capture reveals the problem?

A. destination port
B. version
C. ToS bits
D. MTU

Answer: B

NEW QUESTION 303
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they are happening?

A. RTMT real-time trace
B. Cisco Unified Dialed Number Analyzer
C. Syslog output
D. RTMT performance log viewer

Answer: B

NEW QUESTION 304
An engineer is troubleshooting an issue where aliases that contain an identity “@abc.com” are unable to register with an endpoint due to an entry in the registration restriction configuration in Expressway-E. Where is the alias being blocked in Expressway-E?

A. regex list
B. hunt list
C. black list
D. allow list

Answer: C

NEW QUESTION 305
Which two statements about Cisco Unified CM location bandwidth deduction are true? (Choose two.)

A. If a call uses G.711, Cisco Unified Communications Manager subtracts 64k.
B. If a call uses G.711, Cisco Unified Communications Manager subtracts 80k.
C. If a call uses G.723, Cisco Unified Communications Manager subtracts 16k.
D. If a call uses G.729, Cisco Unified Communications Manager subtracts 16k.
E. If a call uses G.729, Cisco Unified Communications Manager subtracts 24k.

Answer: BE

NEW QUESTION 306
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two.)

A. An H.323 SAF trunk was configured instead of a SIP SAF trunk.
B. No directory number patterns were configured on the Cisco Unified Communications Manager.
C. CCD advertising service was not activated.
D. Incorrect user credentials were used on the SAF Forwarder.
E. CCD requesting service was not activated.

Answer: DE

NEW QUESTION 307
Company XYZ reports that their SAF calls are being routed through the PSTN. Which cause of the issue is true?

A. TCP Connection Failure has occurred between the SAF Forwarder and Cisco Unified Communications Manager.
B. Cisco Unified Communications Managed did not increment the service number correctly.
C. The maximum number of learned patterns have being reached.
D. Cisco Unified Communications Manager did not construct the SAF message correctly.

Answer: A

NEW QUESTION 308
Which action can you take to prevent users from transferring external calls to external devices?

A. Enable the Block OffNet to OffNet Transfer feature in Cisco Unified Communications Manager.
B. Block the National route pattern.
C. Remove the route pattern to prevent inbound calls from matching the gateway.
D. Create a new translation pattern to block external call transfer.

Answer: A

NEW QUESTION 309
Which CLI command is used to troubleshoot ILS network connection issues within the local Cisco Unified CM cluster to determine which server within the cluster is the xnode?

A. utils ils lookup
B. utils ils showpeerinfo
C. utils ils display xnode
D. utils ils find xnode

Answer: D

NEW QUESTION 310
After you deploy a new Cisco Collaboration solution, users report echoes and choppy voice quality. Which two actions correct the problem? (Choose two.)

A. Upgrade the Cisco IOS version and flash memory on the Cisco IOS router.
B. Deploy additional hardware resources.
C. Deploy an echo canceller.
D. Upgrade Cisco Unified Communications Manager.
E. Enable QoS on the network.

Answer: CE

NEW QUESTION 311
……

p.s.

PassLeader 300-080 dumps from Google Drive FYI:

https://drive.google.com/open?id=0B-ob6L_QjGLpZ0owZW9faW9hbzQ

(313q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

@CaptainC

Congrats for Passing the exam, can you please just verify what dumps you used or most valid ? is it from pass leader or the latest one fromthe lab 591 or something like that ?

New Questions on 300-075….I used the 459 bank and failed. anyone have updated version…. Certs expire 2.28.19

Congratulations!

Passed 300-080 exam on 20/Feb/2019 with 950.

PassLeader 313q dumps are still valid – no new questions! (Only some answers are debatable.)

Special thanks guys for sharing!

BTW, anyone kindly share the PassLeader 300-085 dumps with 246q?

Thanks a lot!

Passed the exam too…..89X
Dump Question is valid.
I m using spoto, pass leader and 1 more dump that been shared previously in this thread.
Just need to identify the correct answer.

ist the spoto dump still enough for passing 300-080?

Has anyone attempted 300-080 soon ?
Is spoto 162q uploaded here still valid ?

@rocky can u give my e-mail to communicate easily ?
my e-mail is ahmedhabib2293 at gmail . com

@Habib, it is valid.
the link is just there. download it and do some work on finding the correct answer

Spoto is Valid , just passed the exam today, make sure to review the answers. good luck all.

@sam spoto dump wrong answer ? did this dump is enough to pass

@sam did spoto dump has wrong answer ? did this dump is enough to pass

I want to place the exam next Thurusday, is the dump still valid ?

@sam Can u send the correct answers for wrong ones ?

all ,
in spoto the wrong answers are

Q3 the answer is SIP expieres timeout
Q15 answer is 2xx expiry timer
Q21 answer is c
q38 dont remember
Q63 answer is sip route pattern
q2q51 the answer is b
Q52 the answer is A
Q69 answer is three participant

and there a few more that I don’t recall because I know its wring through my knowledge

yes its enough to pass and of course, you will have between 5-10 new questions in the exam, just eliminate the non-sense answers, i remember a new question came asked about what is the default value between the sip phone and the call manager , the correct answer is 120ms with the service parameters

Thank u very much @Sam

Can someone sent spoto dump to my email lordarayend @ gmail dot com ?