Share your TVoice v8.0 Experience

More:

3. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(303q~~~NEW VERSION DUMPS!!!)

And,

4. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(459q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Hi all,

I just passed the exam with the Spoto dumps 189. The question from the exam were 100% equal, then from Spoto.
But some answers on the Spoto dumps are for sure incorrect.

Good luck for all of you!
Rantanplan

Hi Rantanplan, coongrats on passing the exam! would you kind enough to us the dumps/reviewers that you used? thanks in advance!

The best preparation for the Cisco exam, I passed the cisco exam with the help of it.
good luck guys
http:/**/c7.gg/fCXw8

18. Which two types of call causes the user to hear the reorder tone? (Choose two.) (was on the exam)
a) restricted call ———->correct
b) call using a non-Cisco phone
c) call to a number that is working but is unlisted
d) unrestricted call
e) call to number that has been blocked ———->correct

19. An engineer is investigating voice quality degradationon calls passing through a particular SIP gateway. To father the necesarry information, simple traffic captures are taken. (was on the exam)
Which information in the capture reveals the problem?
a) version
b) destination port
c) ToS bits——->correct (not sure)
d) MTU

20. In a network with two Cisco Unified Communications Manager clusters, Phone 1 on Cluster A dials {email not allowed} to reach Phone 2 on Cluster B, and the call fails.
What are two possible causes for this problem? (Choose two) (was on the exam)
a) The calling search space on Phone 1 contains the partitions with a pattern that matches {email not allowed}
b) Cisco UDS is not enabled on Cluster B —->correct (not sure)
c) Cisco UDS is not enabled on Cluster A
d) Cluster A does not have a SIP trunk to reach Cluster B—->correct (not sure)
e) Cluster B does not have a SIP trunk to reach Cluster A

21. Company XYZ just completed an upgrade of the Cisco Unified Communications Manager from version 9.X to version 10.5 Users report that they cannot log in to Extension Mobility after the upgrade.
This error message is displayed ” login is unavailable (23)” Which action can resolve the issue? (was on the exam)
a) Re-enable extension mobility for the affected users
b) Cisco Unified Communications Manager 10.5 does not include Extension Mobility
c) Enable the remote cluster option for the affected users
d) Enable the home cluster option for the affected users —->correct

7. 1. Refer to the exhibit inbound calls via a SIP trunk to the Cisco IP phones that are registered on Cisco Unified Communications Manager are failing.
Based on the Cisco CallManager service trace, which action should you take to fix the issue? (was on the exam)
a) Add xyz.com in the Organization Top level Domain field on Cisco Unified Communications Manager
b) Set the incoming Transport Type to TLS on the SIP trunk security profile that is assigned to the SIP trunk
c) Check whether the calling search space for incoming calls on the Sip Trunk has access to the partition of the Cisco IP phone that is being called
d) Add vcs.abc.org in the Organization Top Level Domain Field on Cisco Unified Communications Manager

When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration? (was on the exam)
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.

Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information?(was on the exam)
A. location controller
B. route pattern
C. route string
D. URI

SIP 15 min timeout question: SESSION REFRESH

Based on the ACK SDP output, what can be concluded? (was on the exam)
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
xd This event is a multipoint video call with three participants.

A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. (was on the exam /2 questions/)
Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911.
At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work.
Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group

a. The device pool contains more call processing agents in the CMO group than the endpoint can support (was on the exam)
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support ——>correct
d. MRGL contains more media groups than the endpoint can support

Q27 Refer to the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder. (was on the exam)
What is the root cause of the issue?

a. The client SAF label is incorrectly configured
b. The SAF port is incorrectly configured
c. The SAF password is incorrectly configured ———>correct (not sure)
d. The packets are being corrupted on the network
e. The packets are being dropped on the network

48. Refer to the exhibit. In this CUCM dial-plan, a localized translation pattern 9.1[2-0]XX[2-0]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. (was on the exam)
The translation pattern is used to globalize the Users dialed digits followed by matching a \+1 Route Pattern as seen in the exhibit.
Users with DeviceLines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678300 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
a. Route Pattern does not have “Urgent Priority” checked—–>correct
b. Translation Pattern does not have “Urgent Priority” checked —–>correct
c. Translation Pattern has “Provide Outside Dial Tone” checked
d. Route Pattern does not have “Allow Overlap Sending” checked
e. Route Pattern Call Classification set to OffNet

Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)

A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct

SAF not registering check the config, (was on the exam)
username/password etc,

The extension mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?: (was on the exam)
User profile
Device Profile 
And others

1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot the problem?(choose two) (was on the exam)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk

8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)

1.Which debug command analyzes messages that are produced by SIP during the call setup process in IOS? (was on the exam)
A:Debug ccsip messages

one dbreplication question: what does the reply of the status command mean? My answer: a synch problem in the one of the tables;

how do you prevent echo and choppy audio: my answer—->QoS and Echo Canceller;

a really long question about translation rules and how do you preserve a dialing habits in SRST mode. They want to configure a translation profile under CCM falback mode. Please bear in mind here the directions are reverted not like in dial peers;

G711, G729, G723 bandwidth question. How much the CUCM will substract (two questions);

Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” parameter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
x Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”

Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was not activated.
d An H.323 SAF trunk was configured instead of a SIP SAF trunk
e CCD advertising service was not activated.

How do you block external transfers on the CUCM? Ans: enable ‘block offnet to offnet transfer feature’

An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one.
Which statement can cause of this issue? (was on the exam)
X a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge

A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed qnfigured on a Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”.
Which configuration requirement supports Cisco EMCC and avoids this error condition?

I made it today with 9xx/1000, everything here is valid!

I am now moving on to Next Exam

Share latest examm Questions enjoy

Without 1 ***
https:/*/ezee.link/Q4ip0SG4xT

SAF not registering check the config, (was on the exam)
username/password etc,

The extension mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?: (was on the exam)
User profile
Device Profile 
And others

1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot thwde problem?(choose two) (was on the exam)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk

8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)

Congratulations!

Passed the 300-080 exam on 27/June/2019!

A lot of new questions in my 300-080 test, old version dumps are not valid enough for passing now.

I mainly learned the PassLeader 300-080 dumps (333q version), all new questions are from PL.

Really helpful.

+1

+1

p.s.

Taking the 300-080 exam ASAP, the exam will retire in Feb/2020!!!

Referring to — Next Level Certifications — from the official website.

Good luck!

P.S.

1. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(333q~~~NEW VERSION DUMPS!!!)

And,

2. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

More:

3. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(303q~~~NEW VERSION DUMPS!!!)

And,

4. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(459q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

passed exam 080 using spoto177 and got few new questions; can share it with you for a fee; also passed 300-085 with a score of 9XX using spoto157 questions. 90% of the questions in the exam, just email benvaras2 at Gmail if interested, for a fee, just need to recover cost getting this spoto. email at benvaras2 at Gmail

Have a HOT Expierence for TSHOOT 300-080, passed with success by 908 score some days ago.
ready to share SPOTO177 (with corrections wrong Q), my memories and about 10 new questions.
contact in gmail ttrust848

18. Which two types of call causes the user to hear the reorder tone? (Choose two.) (was on the exam)
a) restricted call ———->correct
b) call using a non-Cisco phone
c) call to a number that is working but is unlisted
d) unrestricted call
e) call to number that has been blocked ———->correct

19. An engineer is investigating voice quality degradationon calls passing through a particular SIP gateway. To father the necesarry information, simple traffic captures are taken. (was on the exam)
Which information in the capture reveals the problem?
a) version
b) destination port
c) ToS bits——->correct (not sure)
d) MTU

20. In a network with two Cisco Unified Communications Manager clusters, Phone 1 on Cluster A dials {email not allowed} to reach Phone 2 on Cluster B, and the call fails.
What are two possible causes for this problem? (Choose two) (was on the exam)
a) The calling search space on Phone 1 contains the partitions with a pattern that matches {email not allowed}
b) Cisco UDS is not enabled on Cluster B —->correct (not sure)
c) Cisco UDS is not enabled on Cluster A
d) Cluster A does not have a SIP trunk to reach Cluster B—->correct (not sure)
e) Cluster B does not have a SIP trunk to reach Cluster A

21. Company XYZ just completed an upgrade of the Cisco Unified Communications Manager from version 9.X to version 10.5 Users report that they cannot log in to Extension Mobility after the upgrade.
This error message is displayed ” login is unavailable (23)” Which action can resolve the issue? (was on the exam)
a) Re-enable extension mobility for the affected users
b) Cisco Unified Communications Manager 10.5 does not include Extension Mobility
c) Enable the remote cluster option for the affected users
d) Enable the home cluster option for the affected users —->correct

7. 1. Refer to the exhibit inbound calls via a SIP trunk to the Cisco IP phones that are registered on Cisco Unified Communications Manager are failing.
Based on the Cisco CallManager service trace, which action should you take to fix the issue? (was on the exam)
a) Add xyz.com in the Organization Top level Domain field on Cisco Unified Communications Manager
b) Set the incoming Transport Type to TLS on the SIP trunk security profile that is assigned to the SIP trunk
c) Check whether the calling search space for incoming calls on the Sip Trunk has access to the partition of the Cisco IP phone that is being called
d) Add vcs.abc.org in the Organization Top Level Domain Field on Cisco Unified Communications Manager

When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration? (was on the exam)
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.

Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information?(was on the exam)
A. location controller
B. route pattern
C. route string
D. URI

SIP 15 min timeout question: SESSION REFRESH

Based on the ACK SDP output, what can be concluded? (was on the exam)
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
xd This event is a multipoint video call with three participants.

A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. (was on the exam /2 questions/)
Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911.
At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work.
Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group

a. The device pool contains more call processing agents in the CMO group than the endpoint can support (was on the exam)
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support ——>correct
d. MRGL contains more media groups than the endpoint can support

Q27 Refer to the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder. (was on the exam)
What is the root cause of the issue?

a. The client SAF label is incorrectly configured
b. The SAF port is incorrectly configured
c. The SAF password is incorrectly configured ———>correct (not sure)
d. The packets are being corrupted on the network
e. The packets are being dropped on the network

48. Refer to the exhibit. In this CUCM dial-plan, a localized translation pattern 9.1[2-0]XX[2-0]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. (was on the exam)
The translation pattern is used to globalize the Users dialed digits followed by matching a \+1 Route Pattern as seen in the exhibit.
Users with DeviceLines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678300 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
a. Route Pattern does not have “Urgent Priority” checked—–>correct
b. Translation Pattern does not have “Urgent Priority” checked —–>correct
c. Translation Pattern has “Provide Outside Dial Tone” checked
d. Route Pattern does not have “Allow Overlap Sending” checked
e. Route Pattern Call Classification set to OffNet

Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)

A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct

SAF not registering check the config, (was on the exam)
username/password etc,

The extension mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?: (was on the exam)
User profile
Device Profile 
And others

1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot the problem?(choose two) (was on the exam)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk

8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)

1.Which debug command analyzes messages that are produced by SIP during the call setup process in IOS? (was on the exam)
A:Debug ccsip messages

one dbreplication question: what does the reply of the status command mean? My answer: a synch problem in the one of the tables;

how do you prevent echo and choppy audio: my answer—->QoS and Echo Canceller;

a really long question about translation rules and how do you preserve a dialing habits in SRST mode. They want to configure a translation profile under CCM falback mode. Please bear in mind here the directions are reverted not like in dial peers;

G711, G729, G723 bandwidth question. How much the CUCM will substract (two questions);

Jabber for Windows or MAC Soft Client fails to register with Cisco Unified Communications Manager. This except is seen in the client logs:
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(707)][csf.sip-call-control][ccsip_get_exp_time_2xx] – SIPCC-SIP_REG: 51/1, ccsip_get_exp_time_2xx: Warning – Registration period received (120) minus configured timer_register_delta (120) is less than 20 seconds.
DEBUG[0x0000700002f25000][ipcc/core/sipstack/ccsip_register.c(391)][csf.sip-call-control][sip_reg_sm_change_state] – SIPCC-SIP_STATE: 51/1, sip_reg_sm_change_state: Registration state change: SIP_REG_STATE_REGISTERING—z SIP_REG_STATE_UNREGISTERING
Which configuration item needs to be adjusted to correct this condition?
o “KeepAlive_Timer” paweframeter in jabber-config.xml file
o Unified CM Device Assigned SIP Profile “Timer Register Delta”
x Unified CM Device Assigned SIP Profile “2XX Expiry Timer”
o Unified CM Service Parameter “Station KeepAlive Interval”

Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was not activated.
d An H.323 SAF trunk was configured instead of a SIP SAF trunk
e CCD advertising service was not activated.

How do you block external transfers on the CUCM? Ans: enable ‘block offnet to offnet transfer feature’

An engineer encounters an issue where a customer wants to enable multiple Cisco TelePresence conference bridges, but can enable only one.
Which statement can cause of this issue? (was on the exam)
X a. No valid release key is installed on the TS conductor
b. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled
c. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager
d. TS conductor can support only one conference bridge

A Cisco Unified Communications Manager Extension Mobility enabled user attempts to log in to a new phone where Cisco Extension Mobility Cross Cluster Service is configured with the URL that is displayed qnfigured on fa Cisco Unified CM 9.X or later Unified CM cluster. After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”.
Which configuration requirement supports Cisco EMCC and avoids this error condition?

I made it today with 9xx/1000, everything here is valid!

I am now moving on to Next Exam

Share latest examm Questions enjoy

Without 2 stars ***
https:/*/hide*uri.com/xdMM8X

Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder.
c CCD requesting service was not activated.
d An H.323 SAF trunk wasasc configured instead of a SIP SAF trunk
e CCD advertising service was not activated.

Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two)
a No directory number patterns were configured on the Cisco Unified Communications Manager.
b Incorrect user credentials were used on the SAF Forwarder. ———> correct
c CCD requesting service was not activated. ———> correct
d An H.323 SAF trunk wasasc configured instead of a SIP SAF trunk
e CCD advertising service was not activated.

19. An engineer is investigating voice quality degradationon calls passing through a particular SIP gateway. To father the necesarry information, simple traffic captures are taken. (was on the exam)
Which information in the capture reveals the problem?
a) version —> correct
b) destination port
c) ToS bits
d) MTU

Hi Anonymous! Where did you get these questions? I see some have wrong answers like this one. I am planning to take the test soon.. please keep sharing the questions and we can work on finding correct answers.

20. In a network with two Cisco Unified Communications Manager clusters, Phone 1 on Cluster A dials {email not allowed} to reach Phone 2 on Cluster B, and the call fails.
What are two possible causes for this problem? (Choose two) (was on the exam)
a) The calling search space on Phone 1 contains the partitions with a pattern that matches {email not allowed}
b) Cisco UDS is not enabled on Cluster B
c) Cisco UDS is not enabled on Cluster A
d) Cluster A does not have a SIP trunk to reach Cluster B—->correct
e) Cluster B does not have a SIP trunk to reach Cluster A—->correct

After the user enters the user ID and pin, the phone displays “Login Unreachable (23)”.

This should be login is unavailable(23) and answer would be that this user does not exist in any of the remote clusters

Hi Rod, do you have the spoto dump for you reviewer?

Suresh, no, I don’t have spoto dumps. These questions from there?

What would be the correct answer for this?

You configured a Cisco ISR G2 as a SIP gateway, but the gateway does not show that it is registered with Cisco Unified Communications Manager. What is causing this issue?
A . Cisco Unified Communications Manager does not support SIP gateways.
B . The gateway does not have the UC license installed.
C . The gateway does not have Cisco Unified Border Element session licensing.
D . Cisco Unified Communications Manager does not show a SIP gateway as registered if it is not properly configured.
E . Cisco Unified Communications Manager never shows a SIP gateway as registered even when it is properly configured.
F . The Cisco ISR G2 cannot be a SIP gateway.

Congratulations!

Passed the 300-080 exam on 4/July/2019!

A lot of new questions in my 300-080 test, old version dumps are not valid enough for passing now.

I mainly learned the PassLeader 300-080 dumps (333q version), all new questions are from PL.

Really helpful.

+1

+1

p.s.

Taking the 300-080 exam ASAP, the exam will retire in Feb/2020!!!

Referring to — Next Level Certifications — from the official website.

Good luck!

P.S.

1. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(333q~~~NEW VERSION DUMPS!!!)

And,

2. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

More:

3. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(303q~~~NEW VERSION DUMPS!!!)

And,

4. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(459q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Rod, I don’t have spoto as well, just curious on what reviewer do you use… Honestly, I just waiting for updates here as well and hoping for someone who can share viable information. good luck on your exam! hope you can share after! cheers!

19. An engineer is investigating voice quality degradationon calls passing through a particular SIP gateway. To father the necesarry information, simple traffic captures are taken. (was on the exam)
Which information in the capture reveals the problem?
a) version
b) destination port
c) ToS bits——->correct (not sure)
d) MTU

20. In a network with two Cisco Unified Communications Manager clusters, Phone 1 on Cluster A dials {email not allowed} to reach Phone 2 on Cluster B, and the call fails.
What are two possible causes for this problem? (Choose two) (was on the exam)
a) The calling search space on Phone 1 contains the partitions with a pattern that matches {email not allowed}
b) Cisco UDS is not enabled on Cluster B —->correct (not sure)
c) Cisco UDS is not enabled on Cluster A
d) Cluster A does not have a SIP trunk to reach Cluster B—->correct (not sure)
e) Cluster B does not have a SIP trunk to reach Cluster A

21. Company XYZ just completed an upgrade of the Cisco Unified Communications Manager from version 9.X to version 10.5 Users report that they cannot log in to Extension Mobility after the upgrade.
This error message is displayed ” login is unavailable (23)” Which action can resolve the issue? (was on the exam)
a) Re-enable extension mobility for the affected users
b) Cisco Unified Communications Manager 10.5 does not include Extension Mobility
c) Enable the remote cluster option for the affected users
d) Enable the home cluster option for the affected users —->correct

7. 1. Refer to the exhibit inbound calls via a SIP trunk to the Cisco IP phones that are registered on Cisco Unified Communications Manager are failing.
Based on the Cisco CallManager service trace, which action should you take to fix the issue? (was on the exam)
a) Add xyz.com in the Organization Top level Domain field on Cisco Unified Communications Manager
b) Set the incoming Transport Type to TLS on the SIP trunk security profile that is assigned to the SIP trunk
c) Check whether the calling search space for incoming calls on the Sip Trunk has access to the partition of the Cisco IP phone that is being called
d) Add vcs.abc.org in the Organization Top Level Domain Field on Cisco Unified Communications Manager

When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration? (was on the exam)
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.

Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information?(was on the exam)
A. location controller
B. route pattern
C. route string
D. URI

SIP 15 min timeout question: SESSION REFRESH

Based on the ACK SDP output, what can be concluded? (was on the exam)
a There is no DTMF support for the call.
b The total amount of bandwidth for the video channels is 192 kbps.
c High-definition video is configured for the endpoints.
xd This event is a multipoint video call with three participants.

A company has a headquarters and a remote site. Cisco Unified Communications Manager (CUCM) acts as a DHCP server. (was on the exam /2 questions/)
Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN prefix is 9, and the emergency number is 911.
At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
-Softphones can roam between two sites.
-A roaming softphone uses the local gateway for all PSTN calls.
-The user keeps home dial habits on a roaming softphone, with the exception of the emergency number.
When a headquarter user uses a softphone at the remote site, prefix 9 can be used to make PSTN calls via voice gateway in the remote site, but emergency number 112 does not work.
Which setting on CUCM should be checked?
o Physical Location
o DHCP subnet
o Device Mobility Info
X Device Mobility Group

a. The device pool contains more call processing agents in the CMO group than the endpoint can support (was on the exam)
b. The hunt group contains more devices than the endpoint can support
c. A lower bandwidth is set in the region than the endpoint can support ——>correct
d. MRGL contains more media groups than the endpoint can support

Q27 Refer to the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder. (was on the exam)
What is the root cause of the issue?

a. The client SAF label is incorrectly configured
b. The SAF port is incorrectly configured
c. The SAF password is incorrectly configured ———>correct (not sure)
d. The packets are being corrupted on the network
e. The packets are being dropped on the network

48. Refer to the exhibit. In this CUCM dial-plan, a localized translation pattern 9.1[2-0]XX[2-0]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. (was on the exam)
The translation pattern is used to globalize the Users dialed digits followed by matching a \+1 Route Pattern as seen in the exhibit.
Users with DeviceLines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678300 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two)
a. Route Pattern does not have “Urgent Priority” checked—–>correct
b. Translation Pattern does not have “Urgent Priority” checked —–>correct
c. Translation Pattern has “Provide Outside Dial Tone” checked
d. Route Pattern does not have “Allow Overlap Sending” checked
e. Route Pattern Call Classification set to OffNet

Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)

A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Timeout
D – SIP Expires Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct

SAF not registering check the config, (was on the exam)
username/password etc,

The extenAXsion mobility as configured as well but a end-users is complaining that your DN isn’t correct. Where do you right it?: (was on the exam)
User profile
Device Profile 
And others

1. You discover that a CCD is failing to learn patterns with RTMT. which two actions can you take to troubleshoot the problem?(choose two) (was on the exam)
• Verify that the trunk is selected for the CCD request service
• Verify the SAF configuration on the trunk

8. A Cisco Unified manager call trace ,which string indicates an intrasite call? (was on the exam)
• OutsideDialton =(1)

1.Which debug command analyzes messages that are produced by SIP during the call setup process in IOS? (was on the exam)
A:Debug ccsip messages

one dbreplication question: what does the reply of the status command mean? My answer: a synch problem in the one of the tables;

how do you prevent echo and choppy audio: my answer—->QoS and Echo Canceller;

a really long question about translatiaxon rules and how do you preserve a dialing habits in SRST mode. They want to configure a translation profile under CCM falback mode. Please bear in mind here the directions are reverted not like in dial peers;

I made it today with 9xx/1000, everything here is valid!

I am now moving on to Next Exam

Share latest examm Questions enjoy

Erase 2 Star***
https:/*/hec.s*u/jZr6

Calls from a cisco IP Phone out to the PSTN through SIP TRUNK intermittently drop after the call is active for exactly 15 minutes. Which process is failing? (was on the exam)

A. – SIP Keepalive timeout
B.- SIP Dialog Refresh
c. – SIP OPTIONS Tdimeout
D – SIP Expires Timeout
E – SIP Register Refresh
F. – SIP Session Refresh ———> correct

SAF not registering check the config, (was on the exam)

Hi!

The new PassLeader 300-075 dumps (July/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 466
A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device profile. However, the user logs into a Cisco 8941, which device profile will be used?

A. 8941 default device profile
B. 8851 default device profile
C. the 8851 device profile
D. universal device profile

Answer: D

NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?

A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect

Answer: D

NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed

Answer: C

NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch

Answer: A

NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?

A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone

Answer: A

NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)

Answer: D

NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

A. 0
B. 30
C. 120
D. 60

Answer: C

NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone

Answer: D

NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

Answer: BE

NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones

Answer: D

NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?

A. CS4
B. CS2
C. AF41
D. EF

Answer: A

NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe

Answer: A

NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration

Answer: BE

NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate

Answer: D

NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)

A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks

Answer: CE

NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.

Answer: C

NEW QUESTION 482
……

P.S.

PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy the short link and open it in your web browser!!!)]

BTW:

1. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(303q~~~NEW VERSION DUMPS!!!)

2. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(333q~~~NEW VERSION DUMPS!!!)

3. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Hello there Today pass the exam with 912

https:/**/*hideuri.c*o*m*/*qJJOdJ

NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

Answer: BE

NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones

Answer: D

NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?

A. CS4
B. CS2
C. AF41
D. EF

Answer: A

NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe

Answer: A

NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration

Answer: BE

NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplicdation rebuild
D. utils dbreplication runtimestate

Answer: D

Just Passed my Test

I am now moving on to Next Exam

Share latest examm Questions enjoy

Erase 2 Star**
http:/*/shorten*me.pamhardy.net/7166dd1

NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

A. Configurdation > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones

Answer: D

NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?

A. CS4
B. CS2
C. AF41
D. EF

Answer: A

@Rod, any info about your exam?

does anyone passed recently and have a valid dump/reviewer to pass the exam? my exam is scheduled on last week of this month…

Hi friends please help me with the below questions
1.calls from a cisco IP phone out to the PSTN through a SIP trunk intermittently drop after the call is active for exactly 15 minutes.which process is causing it
– SIP options timeout
-SIP session expires timer
Sip register refresh

2. In SAF deployment, the registration status looks correct and the learned patterns apear reachable,but calls are not routed.what is the issue
– network connection failire b/n SAF forwarder and CUCM

-TCP connection failure

3.which two issues can prevent
an IP phone from receiving IP address via DHCP
-the DHCP server is not on the same vlan as the phone
-the DHCP scope’s releases are exahusted
-DHCP option 150 is incorrect
-Tftp server not reachable
-The DHCP scope is not defined for the subnetof the phone
4. Which two items desplayed on the endpoint registration verification page in Cisco VCS
a. endpoint MAC address
b.device pool
C. endpoint registration status
d. description
E.device type
F. endpoint name

5. A user can login into profile but notices extension is not correct.which component should the engineer check first
a. Device profile
b. UC service
c. Phone service
D.user profile

6. Which config can be dynamically set using CUCM mobility feature
A. Phone model and protocol
B.SRST reference
C. CSS and gateway
D.partition and CSS
E.media resources and permanent bridges

Which debug comnand analyzes messages that are produced by SIP during the call setup process in IOS
A. debug CCSIP messages
B.debug ccsip messages

8. Drag and drop
-one way audio issue
– pixlation,smearing
– degraded video quality
-codec no self view
-echo issues

—————————————-
-d/t system manufacturers
– packet loss
-high noise level
– main source is not main camera
-Firewall with packet inspection on

9. Which two types of call causes the user to hear reorde
(Choose two )
A. restricted call
B.unrestricted call
C. Call to blocked number
D. Call to a number that is working but it is unlisted

10.which two protocols are required for cisco 8800 ip phone to register with CUCM
A.Http
B.TFTP
C.DHCP
D.SCCP
E.SIP
B. Call

ATTENTION!!!

The new PassLeader 300-075 dumps (July/2019 Updated~~~483q New Version) now are available, here are part of 300-075 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?

A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect

Answer: D

NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed

Answer: C

NEW QUESTION 469
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco Switch?

A. access layer switch
B. branch router
C. Cisco IP phone
D. core layer switch

Answer: A

NEW QUESTION 470
Where does an engineer configure Cisco Unified Communications Manager Directory URI?

A. directory number
B. Cisco IPC
C. CSF-Jabber
D. physical phone

Answer: A

NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)

Answer: D

NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

A. 0
B. 30
C. 120
D. 60

Answer: C

NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone

Answer: D

NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

Answer: BE

NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones

Answer: D

NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?

A. CS4
B. CS2
C. AF41
D. EF

Answer: A

NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe

Answer: A

NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration

Answer: BE

NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate

Answer: D

NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)

A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks

Answer: CE

NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

A. Create a block transformation pattern.
B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.

Answer: C

NEW QUESTION 482
……

P.S.

PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy the short link and open it in your web browser!!!)]

What’s More:

1. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(303q~~~NEW VERSION DUMPS!!!)

2. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(333q~~~NEW VERSION DUMPS!!!)

3. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

NEW QUESTION 471
QoS should be configured on Cisco VCS because it processes the media and the call signaling. The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3 DSCP packet value?

A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)

Answer: D

NEW QUESTION 472
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified Communications Manager server is back online. What is the default duration the phone monitors its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and registering with the Cisco Unified CM server?

A. 0
B. 30
C. 120
D. 60

Answer: C

NEW QUESTION 473
Imagine you configured several zones for device registration on Cisco VCS. To which superior zone are all of your configured zones associated?

A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone

Answer: D

NEW QUESTION 474
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

A. You can register endpoints to default zone.
B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and firewall traversal.

Answer: BE

NEW QUESTION 475
An engineer must verify that Expressway connects to Cisco Unified Communication Manager using TLS. Which menu navigation sequence accomplishes this task?

A. Configuration > Domains
B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones

Answer: D

NEW QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?

A. CS4
B. CS2
C. AF41
D. EF

Answer: A

NEW QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in Extension Mobility. What Extension Mobility equivalency feature enables differences?

A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe

Answer: A

NEW QUESTION 478
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

A. Date/Time Group Configuration
B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration

Answer: BE

NEW QUESTION 479
Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI?

A. utils dbreplication clusterrest
B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate

Answer: D

NEW QUESTION 480
Which two devices or applications support call preservation? (Choose two.)

A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator
E. SIP trunks

Answer: CE

NEW QUESTION 481
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the local cluster from routing calls to a specific pattern learned via ILS. What should be configured within the local CUCM cluster to accomplish this?

A. Create a block transformation pattern.
B. Create a block rowdute pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.

Answer: C

NEW QUESTION 467
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?

A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect

Answer: D

NEW QUESTION 468
Which method is recommended to implement high availability when configuring the Extension Mobility phone service?

A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed

Answer: C

I have taken the exam 300-080 today and failed 845/860
I was learning prep-away. It is outdated.

20 new questions
Some include
Codec negotiation b/n CUCM and H.245
-originating device
-terminating device
-negotiations on each call
-always CUCM

Where SAF learned patterns can be found
-RTMT —–> reports
-RTMT——-> learned patterns
-CUCM —-call routing > CCD

Which codec is used
-G.729
-G.711
-G.723r63

Configuring translation pattern to call from 3xxx to 2xxx

Utils replication output table
-roundtrip time issue
-dreplication table something

Which two protocols required for 8800 series phones to register
– SIP
-SCCP
-TFTP
-DHCP

–

Sorry hear that Cox.

Passed today, easy exam can’t complain. the questions posted here are good.
Studied questions posted here and itlibraries dumps

Congratulations!

Passed the 300-080 exam on 24/July/2019!

A lot of new questions in my 300-080 test, old version dumps are not valid enough for passing now.

I mainly learned the PassLeader 300-080 dumps (333q version), all new questions are from PL.

Really helpful.

+1

+1

+1

p.s.

Taking the 300-080 exam ASAP, the exam will retire in Feb/2020!!!

Referring to — Next Level Certifications — from the official website.

Good luck!

P.S.

1. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(333q~~~NEW VERSION DUMPS!!!)

And,

2. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

More:

3. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(346q~~~NEW VERSION DUMPS!!!)

And,

4. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

ATTENTION!!!

The new PassLeader 300-070 dumps (July/2019 Updated~~~346q New Version) now are available, here are part of 300-070 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 321
In VCS, for H.323 calls, which setting must be enabled in the search rules for calls to work?

A. Set up search rule source to All Zones.
B. A search rule with a Mode of Any alias and a Target of the directory Expressway.
C. Search rules must be configured with a Source of Any.
D. Search rules configured without a Source of Any.

Answer: C

NEW QUESTION 322
An engineer is configuring a route pattern on Cisco Unified Communications Manager. Which string results in an error message?

A. 123
B. 123?
C. 123@
D. 123$

Answer: D

NEW QUESTION 323
Which tool is used in Cisco Unified Communications Manager to trace the path of a call logically?

A. Dialed Number Analyzer
B. Real Time Monitoring Tool
C. Log Partition Monitoring tool
D. Diagnostic Test tool

Answer: B

NEW QUESTION 324
A company is using an endpoint IX5200 dual-row, 18-seat system. Which conference device must be used?

A. IOS gateways
B. Cisco Unified Communications Manager
C. Cisco TelePresence server
D. MCU

Answer: B

NEW QUESTION 325
An engineer is defining a new Cisco Unified Communications Manager group. Which two features are provided in the Cisco Unified CM group? (Choose two.)

A. registration with different clusters in the same network
B. system IP address
C. prioritized list of up to two Cisco Unified CM servers
D. Cisco Unified CM redundancy
E. call load balancing

Answer: DE

NEW QUESTION 326
Through which two configurations, in Cisco Unified Communications Manager, are inbound and outbound calls routed, respectively?

A. inbound CSS and device pools
B. route lists and outgoing CSS
C. inbound CSS and route groups
D. route patterns and outgoing CSS

Answer: D

NEW QUESTION 327
How many full duplex timeslots does a T1 line contain?

A. 30
B. 24
C. 23
D. 31

Answer: B

NEW QUESTION 328
Which IOS command do you use for PRI when you enable QSIG signaling to connect ISDN to a PBX?

A. isdn switch-type basic-ni
B. isdn incoming-voice voice
C. isdn switch-type basic-qsig
D. isdn switch-type primary-qsig

Answer: D

NEW QUESTION 329
Which tool would be useful for analyzing changes or additions to an existing dial plan?

A. DRS
B. car
C. QRT
D. dna

Answer: D

NEW QUESTION 330
What is the correct procedure for implementing call coverage?

A. configure directory numbers, partitions, hunt pilot, hunt list, line groups
B. configure partitions, line groups, hunt lists, hunt pilot, directory numbers
C. configure partitions, directory numbers, line groups, hunt lists, hunt pilot
D. configure partitions, directory numbers, hunt pilot, hunt list, line groups

Answer: C

NEW QUESTION 331
Which of these best describes the function of transformations?

A. allow the call-routing component to modify the calling or called number
B. identify and define the tags and operatives used in route filters
C. configure and revise discard digits
D. redirect calls

Answer: A

NEW QUESTION 332
Which three can be assigned a partition? (Choose three.)

A. directory number
B. IP phone
C. gateway
D. route pattern
E. translation pattern
F. gatekeeper

Answer: ADE

NEW QUESTION 333
Which two can be targets of a route pattern? (Choose two.)

A. gateway
B. gatekeeper
C. route group
D. route list
E. translation pattern
F. CTI Port

Answer: AD

NEW QUESTION 334
If a SIP phone has neither KPML nor a set of dial rules configured, how are digits sent to Cisco Unified Communications Manager for further processing?

A. the user must press the # key
B. the user must press the Dial softkey
C. the user must press the enbloc softkey
D. when the user finishes dialing, the digits will be sent automatically

Answer: B

NEW QUESTION 335
Which two gateway configuration statements are required in order to enable Cisco Unified Communications Manager to control a T1 PRI in an MGCP gateway? (Choose two.)

A. mgcp
B. ccm-manager config
C. pri-group configuration on the controller
D. mgcp call-agent pointing to tftp server
E. isdn 13-backhaul ccm-manager on the serial interface
F. ccm-manager config server {TFTP ip_address}

Answer: BF

NEW QUESTION 336
Which wildcard character in a route pattern can be used to match to one or more digits in the range 0 through 9?

A. +
B. X
C. !
D. ?

Answer: C

NEW QUESTION 337
Which feature allows users to use the same set of patterns to route calls out of their local gateways?

A. standard local route group
B. route list
C. SIP trunking
D. intercluster trunk

Answer: A

NEW QUESTION 338
Which two phone states must contain the mobility softkey for the Cisco Mobile Connect feature? (Choose two.)

A. on hook
B. on hold
C. off hook
D. ring in
E. connected

Answer: AE

NEW QUESTION 339
You want to set up a Cisco TelePresence Server 8710 cluster. Which statement is true?

A. All blades in a cluster must be running the same version of software.
B. Up to four blades can be clustered in version 2.2.
C. The administrator can mix the type of blades in the cluster.
D. The support key can be installed in a single blade during the implementation.

Answer: B

NEW QUESTION 340
In which scenario can a software conference bridge from Cisco Unified Communications Manager be used for an audio conference?

A. when all participants use the G.711 codec
B. when there are only three participants
C. when all participants use both the G.711 and G.729 codecs
D. when only SCCP phones are used

Answer: A

NEW QUESTION 341
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a phone? (Choose two.)

A. on a softkey configuration
B. on the phone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone

Answer: CE

NEW QUESTION 342
……

P.S.

PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(346q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy the short link and open it in your web browser!!!)]

BTW:

1. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

2. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(333q~~~NEW VERSION DUMPS!!!)

3. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Sorry to hear that Cox…

do you happen to see these questions you are asking?

Hi friends please help me with the below questions
1.calls from a cisco IP phone out to the PSTN through a SIP trunk intermittently drop after the call is active for exactly 15 minutes.which process is causing it
– SIP options timeout
-SIP session expires timer
Sip register refresh

2. In SAF deployment, the registration status looks correct and the learned patterns apear reachable,but calls are not routed.what is the issue
– network connection failire b/n SAF forwarder and CUCM

-TCP connection failure

3.which two issues can prevent
an IP phone from receiving IP address via DHCP
-the DHCP server is not on the same vlan as the phone
-the DHCP scope’s releases are exahusted
-DHCP option 150 is incorrect
-Tftp server not reachable
-The DHCP scope is not defined for the subnetof the phone
4. Which two items desplayed on the endpoint registration verification page in Cisco VCS
a. endpoint MAC address
b.device pool
C. endpoint registration status
d. description
E.device type
F. endpoint name

5. A user can login into profile but notices extension is not correct.which component should the engineer check first
a. Device profile
b. UC service
c. Phone service
D.user profile

6. Which config can be dynamically set using CUCM mobility feature
A. Phone model and protocol
B.SRST reference
C. CSS and gateway
D.partition and CSS
E.media resources and permanent bridges

Which debug comnand analyzes messages that are produced by SIP during the call setup process in IOS
A. debug CCSIP messages
B.debug ccsip messages

8. Drag and drop
-one way audio issue
– pixlation,smearing
– degraded video quality
-codec no self view
-echo issues

—————————————-
-d/t system manufacturers
– packet loss
-high noise level
– main source is not main camera
-Firewall with packet inspection on

9. Which two types of call causes the user to hear reorde
(Choose two )
A. restricted call
B.unrestricted call
C. Call to blocked number
D. Call to a number that is working but it is unlisted

10.which two protocols are required for cisco 8800 ip phone to register with CUCM
A.Http
B.TFTP
C.DHCP
D.SCCP
E.SIP
B. Call

yes Surex ,
Additionaly the below questions appeard
Codec negotiation b/n CUCM and H.245
-originating device
-terminating device
-negotiations on each call
-always CUCM

Where SAF learned patterns can be found
-RTMT —–> reports
-RTMT——-> learned patterns
-CUCM —-call routing > CCD

Which codec is used
-G.729
-G.711
-G.723r63

Configuring translation pattern to call from 3xxx to 2xxx

Utils replication output table
-roundtrip time issue
-dreplication table something

Which two protocols required for 8800 series phones to register
– SIP
-SCCP
-TFTP
-DHCP

a screenshoot showing the output of interrupted call and ask why
-transcoder restarted from VG router side
-transcoder restarted from CUCM

Just Passed my Test.

I am now moving on to Next Exam

Share latest examm Questions enjoy

Without 2 star**
https:/*/u.t*o/Cv_TFQ

2. In SAF deployment, the registration status looks correct and the learned patterns apear reachable,but calls are not routed.what is the issue
– network connection failire b/n SAF forwarder and CUCM

-TCP connection failure

3.which two issues can prevent
an IP phone from receiving IP address via DHCP
-the DHCP server is not on the same vlan as the phone
-the DHCP scope’s releases are exahusted
-DHCP option 150 is incorrect
-Tftp server not reachable
-The DHCP scope is not defined for the subnetof the phone
4. Which two items desplayed on the endpoint registration verification page in Cisco VCS
a. endpoint MAC address
b.devicqwe pool
C. endpoint registration status
d. description
E.device type
F. endpoint name

Congratulations!

Passed the 300-080 exam on 2/Aug/2019!

A lot of new questions in my 300-080 test, old version dumps are not valid enough for passing now.

I mainly learned the PassLeader 300-080 dumps (333q version), all new questions are from PassLeader.

Really helpful.

p.s.

Taking the 300-080 exam ASAP, the exam will retire in Feb/2020!!!

Referring to — Next Level Certifications — from the official website.

Good luck!

P.S.

1. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(333q~~~NEW VERSION DUMPS!!!)

And,

2. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

More:

3. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(346q~~~NEW VERSION DUMPS!!!)

And,

4. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Thank you Cox!

Did you use a dump?

I got a reviewer, saw the questions that you mention below and here are the answer:
1.calls from a cisco IP phone out to the PSTN through a SIP trunk intermittently drop after the call is active for exactly 15 minutes.which process is causing it
-Sip register refresh

2. In SAF deployment, the registration status looks correct and the learned patterns apear reachable,but calls are not routed.what is the issue
– network connection failire b/n SAF forwarder and CUCM

-TCP connection failure

3.which two issues can prevent
an IP phone from receiving IP address via DHCP
-the DHCP server is not on the same vlan as the phone
-the DHCP scope’s releases are exahusted

4. Which two items desplayed on the endpoint registration verification page in Cisco VCS
E.device type
F. endpoint name

5. A user can login into profile but notices extension is not correct.which component should the engineer check first
a. Device profile

6. Which config can be dynamically set using CUCM mobility feature
C. CSS and local gateway

7. Which debug comnand analyzes messages that are produced by SIP during the call setup process in IOS
A. debug CCSIP messages
B.debug ccsip messages

9. Which two types of call causes the user to hear reorder tone
(Choose two )
A. restricted call
D. Call to a number that is working but it is unlisted

which two protocols are required for cisco 8800 ip phone to register with CUCM
B.TFTP
E.SIP

hoping others can share their thoughts also… cheers!

An engineer is configuring inter-site dialing for a company with several branch offices. Due to overlapping extensions at some sites, the site code *3XX is used, where XX is the branch number is the prefixed code. The engineer cannot dial the number at the new branch from head office. Which configuration parameter can the engineer use to resolve this issue?
A. gatekeeper – answer
B. translation pattern
C. route pattern
D. transformation profile

does anyone know why the answer is gatekeeper? for me it is doubtful since “configuration parameter” is the question, not a device or infrastructure…

my answer is B… at the back of my mind…

Drag and drop
-d/t system manufacturers – – degraded video quality
– packet loss – – pixlation,smearing
-high noise level – -echo issues
– main source is not main camera -codec no self view
-Firewall with packet inspection on –one way audio issue

Yes I used dumps but i got 20 new questions
Some of the answers are not correct too

what dump did you use so we can be cautious?

I am taking the exam on Thursday. I am using prepaway, but now with Cox saying that it is outdated this makes the things worse. Anyway I wll share info after the exam.

+ The answer of this question:
1.calls from a cisco IP phone out to the PSTN through a SIP trunk intermittently drop after the call is active for exactly 15 minutes.which process is causing it
is **SIP session expires timer**

Session expires timer is 30 minutes (by default and almost 100% of the cases) and in half of that time which is 15 minutes there should be a session refresh (either Re-Invite or Refresh). Which end (UAS or UAC) must make the refresh is negotiated in the initial SIP negotiation.

Good Luck @ggbg
I am also taking the exam probably in the end of the month.
Everyone who has info share it so me and @ggbg can use it and them verify it after the exam.

Passed IT-Libraries dumps are still good

goodluck ggbg!

+ The answer of this question:
1.calls from a cisco IP phone out to the PSTN through a SIP trunk intermittently drop after the call is active for exactly 15 minutes.which process is causing it
is **SIP session expires timer**

this is the answer by most dumps but I think I saw someone posted that this session expire timer is not included on the choices of “his” question… so maybe it may be different…

Good luck ggbg!
I found some of the questions on vceguide(a free website)
Please check it too, it has around 319 questions and the answers are correct.

I have done my test with 985/1000 congrats me!

D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Without 1 star**
https:/*/ej.uz/dan7

An engineer is configuring inter-site dialing for a company with several branch offices. Due to overlapping extensions at some sites, the site code *3XX is used, where XX is the branch number is the prefixedsq code. The engineer cannot dial the number at the new branch from head office. Which configuratiodn parameter can the engineer use to resolve this issue?
A. gatekeeper – answer
B. translation pattern
C. route pattern
D. transformation profile

To Anon, do you have documentation that it should be gatekeeper?

Dear Cox,

please share this link for vce qts

mail: jksawumey@gmaildotcom

Got the exam yesterday. I wasn’t sure for maybe half of the questions tbh, but actually got quite a high score 930. There were 71 questions, I don’t recall other exam with that many. As someone who has done a lot of troubleshooting I can say that in real scenario most of the questions could have more than 1 correct answer. I would suggest to read through the official exam guide, maybe there Cisco are pointing to the answers they expect.

@COX
vceguide is really good, most of the wrong questions have comments from people who give you the correct answers. I also commented on some questions but didn’t have that much time to go through all of them.
I suggest everyone check vceguide.

Here are some questions I recall, that have not seen in any dump:
1. How is Master-Slave determination done between CUCM and H323 GW?
– always originator
– always receiver
– always CUCM
– different for each call. * My answer-not sure for it.
TBH I don’t know the answer. Here is some info I found which doesn’t give that much info though:
“The Master is chosen based on Endpoint type (gateway > terminal), Endpoint capabilities (video & audio > audio only) and randomly (identical endpoints).”

2. There was a snipp from debug voice ccapi inout something and they were asking which codec is used. I am sure that they were asking for “codec=0x4”.

3. Where should you navigate to correct the configuration if you see RTMT alarm LocationOutOfBandwidth.
– Location *My answer
– Location Bandwidth Manager Group
– Other two options were non-sence

Good luck to all guys!

Congrats ggbg ,
I will re-take the exam early next week

congrats ggbg!

Passed the exam also and agreeing with ggbg, if you don’t have a reliable dump, you can pass the exam if you do troubleshooting “recently”… I’ve been on the L3 support 2yrs ago and sure enough that it is very hard to pass right now if you are knowledgeable at that time only, there are so many new technologies for video and SAF with this exam. you really have to know how to read the logs mostly from CUCM. I’m very much confident in reading the debug logs from routers since I only use CDRs for determining the issue in CUCM but I almost failed in this exam because most of the logs output are not from the routers but CUCM or from the video managers – VCS C and E, etc…

I’ve used the marks4sure dump, only less than 20q is what I have seen on that, so use the vceguide.com instead.

got 71questions also… as said by the tutorial, not all are graded… some are just questions that most probably will be included on the new version of the exam.

good luck!

Are dumps on VCE Plus reliable? Thinking of buying one.

The new PassLeader 300-080 dumps (Aug/2019 Updated) now are available, here are part of 300-080 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 346
Jenny is a mobile worker and uses the extension mobility service to login to the IP phone. When she presses the services button she does not see the extension mobility service listed. What could be the issue? (Choose two.)

A. Extension mobility service is not configured.
B. Service URL is not correct.
C. Device profile is not associated with a user.
D. Large number of login requests.

Answer: BC

NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?

A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931

Answer: C

NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?

A. 4
B. 0
C. 2
D. 3

Answer: B

NEW QUESTION 349
Which CLI command monitors ILS replication progress?

A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup

Answer: C

NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?

A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.

Answer: C

NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?

A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.

Answer: E

NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)

A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.

Answer: EF

NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?

A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters

Answer: F

NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.

Answer: C

NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.

Answer: A

NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.

Answer: D

NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)

A. Hold
B. DTMF relay
C. Transfer
D. Transcoding

Answer: AC

NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

A. Gateway
B. Gatekeeper
C. MCU
D. Call agent

Answer: B

NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.

Answer: BE

NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version

Answer: A

NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate

Answer: A

NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief

Answer: BC

NEW QUESTION 366
……

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(369Q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy that link and open it in your web browser!!!)]

P.S.

1. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(346q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)

A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.

Answer: EF

NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?

A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters

Answer: F

NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.

Answer: C

NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.

Answer: A

NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.

Answer: D

NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)

A. Hold
B. DTMF relay
C. Transfer
D. Transcoding

Answer: AC

NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

A. Gateway
B. Gatekeeper
C. MCU
D. Call agent

Answer: B

NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.

Answer: BE

NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version

Answer: A

NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate

Answer: A

NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief

Answer: BC

Just Passed.

D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Without 1 star**
https:/*/zkrt.cz/F0i

NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version

Answer: A

Hello Guys, can somebody share study materials for this exam?
Some official sert guide or videos?

@Marat Alchinbayev August 16th, 2019

Hello!

Thanks for your new questions.

Would you like to share the full version PassLeader 300-070/300-075/300-080/300-085 dumps?

~~~PassLeader 300-070/300-075/300-080/300-085 dumps~~~

~~~PassLeader 300-070/300-075/300-080/300-085 dumps~~~

I want to complete my CCNP Collaboration exams at the end of year 2019.

Thanks in advance!!!

Any reviews???

Please share.

Thanks!

Hi!

The new PassLeader 300-080 dumps (Aug/2019 Updated) now are available, here are part of 300-080 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?

A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931

Answer: C

NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?

A. 4
B. 0
C. 2
D. 3

Answer: B

NEW QUESTION 349
Which CLI command monitors ILS replication progress?

A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup

Answer: C

NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?

A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.

Answer: C

NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?

A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.

Answer: E

NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)

A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.

Answer: EF

NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?

A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters

Answer: F

NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.

Answer: C

NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.

Answer: A

NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.

Answer: D

NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)

A. Hold
B. DTMF relay
C. Transfer
D. Transcoding

Answer: AC

NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

A. Gateway
B. Gatekeeper
C. MCU
D. Call agent

Answer: B

NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.

Answer: BE

NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version

Answer: A

NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate

Answer: A

NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief

Answer: BC

NEW QUESTION 366
……

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(369Q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy that link and open it in your web browser!!!)]

More:

1. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(369q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

And, more:

1. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(369q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Congratulations Passed!

D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Without 1 star**
https:/*/zkrt.cz/F0i

NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Nawdd Communications Manager alerts.
E. Cisco IOS show commands.

Answer: BE

Hello!

The new PassLeader 300-080 dumps (Aug/2019 Updated) now are available, here are part of 300-080 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?

A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931

Answer: C

NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?

A. 4
B. 0
C. 2
D. 3

Answer: B

NEW QUESTION 349
Which CLI command monitors ILS replication progress?

A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup

Answer: C

NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?

A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.

Answer: C

NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?

A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.

Answer: E

NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)

A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.

Answer: EF

NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?

A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters

Answer: F

NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.

Answer: C

NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.

Answer: A

NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.

Answer: D

NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)

A. Hold
B. DTMF relay
C. Transfer
D. Transcoding

Answer: AC

NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

A. Gateway
B. Gatekeeper
C. MCU
D. Call agent

Answer: B

NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.

Answer: BE

NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version

Answer: A

NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate

Answer: A

NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief

Answer: BC

NEW QUESTION 366
……

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(369Q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy that link and open it in your web browser!!!)]

By the way:

1. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(369q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.

Answer: A

NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.

Answer: D

NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)

A. Hold
B. DTMF relay
C. Transfer
D. Transcoding

Answer: AC

NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

A. Gateway
B. Gatekeeper
C. MCU
D. Call agent

Answer: B

NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.

Answer: BE

NEW QUESTION 363
A user is dialinag 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version

Answer: A

NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate

Answer: A

NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

A. show voicase dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief

Answer: BC

Congratulations Passed!

D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Without 2 star**
http:/*/tiny.l*t/rtmrxx4i

NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)????????

A. Hold
B. DTMF relay
C. Transfer
D. Transcoding

Answer: AC

Hello!

The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?

A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931

Answer: C

NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?

A. 4
B. 0
C. 2
D. 3

Answer: B

NEW QUESTION 349
Which CLI command monitors ILS replication progress?

A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup

Answer: C

NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?

A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.

Answer: C

NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?

A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.

Answer: E

NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)

A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.

Answer: EF

NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?

A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters

Answer: F

NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.

Answer: C

NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.

Answer: A

NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.

Answer: D

NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)

A. Hold
B. DTMF relay
C. Transfer
D. Transcoding

Answer: AC

NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

A. Gateway
B. Gatekeeper
C. MCU
D. Call agent

Answer: B

NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.

Answer: BE

NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version

Answer: A

NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate

Answer: A

NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief

Answer: BC

NEW QUESTION 366
……

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

PassLeader 300-080 dumps FYI:

od.lk/fl/NjFfMTUyNjExM18

(369Q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy that link and open it in your web browser!!!)]

By the way:

1. PassLeader 300-085 dumps FYI:

od.lk/fl/NjFfMTUyNjExNF8

(256q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-070 dumps FYI:

od.lk/fl/NjFfMTUyNjEwOV8

(369q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-075 dumps FYI:

od.lk/fl/NjFfMTUyNjExMF8

(483q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Hello , can somebody share study materials the exam 300-085?
Official guide or recording trainning.
Briantess2018 gmail com

NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?

A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters

Answer: F

NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?

A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.

Answer: C

NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?

A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.

Answer: A

NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?

A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.

Answer: D

NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)

A. Hold
B. DTMF relay
C. Transfer
D. Transcoding

Answer: AC

NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?

A. Gateway
B. Gatekeeper
C. MCU
D. Call agent

Answer: B

NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.

Answer: BE

NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?

A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version

Answer: A

NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?

A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate

Answer: A

NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)

A. show voice dsp group all
B. show voip rtp connections
C. show dawspfarm dsp active
D. show call active voice brief

Answer: BC

Hi guys, today I pass the exam: 978/1000

D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Without 2 star**
http:/*/tiny.l*t/rtmrxx4i