The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
Brent Riley
September 9th, 2019
By the way:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(369q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
egga
September 10th, 2019
hey guys. just passed this exam. Most questions on the exam are not found in the recent PL dump. I recommend to still use it for reference, however you will need to utilize a lot of other resources. IMO i think this exam needs to be revised completely. Good luck
Anonymous
September 11th, 2019
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice ddsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Passed Exam $uccessfully
September 11th, 2019
Congratulations Passed..
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
Without 2 star**
http:/*/tiny.l*t/rtmrxx4i
Anonymous
September 11th, 2019
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
Ramani Iyer
September 16th, 2019
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
Ramani Iyer
September 16th, 2019
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(369q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
September 16th, 2019
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
VALID QUESTIONS
September 16th, 2019
Congratulations Passed.
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
Without 1 star***
http:/*/psce.pw/LQUU2
Anonymous
September 16th, 2019
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?????????/
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
kloo
September 20th, 2019
hello guys
Today I have done my test
Exam Very easy all questions in Dumps
not difficult at all, do not worry!
Without 1 star***
https:*/**/**priv.sh/PWi4BF2
kloo is fake fake fake….
September 22nd, 2019
kloo is fake fake fake
kloo is fake fake fake…. /////////////////
TShoot
September 22nd, 2019
This forum have been quiet for quite some time…Any passers who would like to share their exam experience? Also, any update on valid dumps? Planning to take 300-080 exam after 2 to 3 weeks.
Mahsa
September 23rd, 2019
hello everybody
is someone has pdf of book > Troubleshooting Cisco IP Telephony and Video (CTCOLLAB) Foundation Learning Guide (CCNP Collaboration Exam 300-080 CTCOLLAB) send for me . thanks mhs.ebrahimij at gmail dot com
Mike
September 23rd, 2019
Yeah, please.
Can anybody share pdf book ?
TShoot
September 23rd, 2019
i need also pdf book… please anybody who have the book, kindly share.
Charlot Ebejer
September 25th, 2019
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
Charlot Ebejer
September 25th, 2019
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(386q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
József Borbás
September 25th, 2019
Hola!
The new PassLeader 300-070 dumps (Updated Recently) now are available, here are part of 300-070 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 385
How is the translated number recorded in the Call Detail Record when a dialed number is manipulated using a translation pattern?
A. It does not display that a call was placed.
B. It shows the translated number and not the originally dialed number.
C. It shows the originally dialed number, not the translated one.
D. It shows only that a call was placed, but not the dialed or translated number.
Answer: B
NEW QUESTION 386
In Cisco Unified Communications Manager, for which type of trunk is URI dialing available?
A. SIP
B. H.323
C. H.225
D. QSIG
Answer: A
NEW QUESTION 387
Through which two configuration elements are off-net calls routed in inbound and outbound direction respectively?
A. Inbound CSS and route groups.
B. Inbound CSS and device pools.
C. Route lists and outgoing CSS.
D. Route patterns and outgoing CSS.
Answer: A
NEW QUESTION 388
An engineer is developing a new SRST configuration for a branch router using PRI for PSTN access. The engineer is developing a test plan for SRST using this new H.323 gateway. How does the engineer validate that H.323 call routing is working in a failover scenario?
A. When the WAN is down, dial another extension in the office.
B. When the WAN is down, dial an extension at another site in the network.
C. Establish a call through the gateway and drop the WAN link to see if the call is preserved.
D. Establish a call through the gateway, place it on hold, and retrieve it.
E. When the WAN is down, place a new local call and long distance call.
Answer: C
NEW QUESTION 389
When configuring a SIP route pattern, which two provide the basis for routing? (Choose two.)
A. Domain name
B. MAC address
C. IP address
D. Directory number
E. E.164 number
Answer: AC
NEW QUESTION 390
An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two markings can be used for voice traffic? (Choose two.)
A. dscp ef
B. cos 6
C. ip precedence 5
D. dscp 5
E. cos 4
F. ip precedence 3
Answer: AC
NEW QUESTION 391
Which two options are correct description of Media Resources? (Choose two.)
A. Codec-selection
B. Dial peers
C. VAD
D. Music on hold
E. Annunciator
Answer: DE
NEW QUESTION 392
What is the decimal value of DSCP marking Expedited Forwarding?
A. 41
B. 46
C. 34
D. 48
Answer: B
NEW QUESTION 393
Which purpose of the Dialed Number Analyzer within Cisco Unified Communications Manager is true?
A. It provides a way to retrieve only the called number when examining CDR logs.
B. It is used as a troubleshooting tool as it provides an efficient way to analyze the dial plan.
C. It allows the administrator to see the dialed number (DNIS) of a call in real time as the call is being placed.
D. It helps sort and analyze CDR logs.
Answer: B
NEW QUESTION 394
Which component must an engineer configure before configuring SIP route pattern?
A. SIP trunk
B. route filter
C. route partition
D. calling search space
Answer: A
NEW QUESTION 395
Which two devices support voice and video capabilities simultaneously? (Choose two.)
A. Cisco TelePresence Codec C40
B. Cisco 7975 IP phone
C. Cisco 7960 IP phone
D. Intercluster trunk
E. Cisco 7940 IP phone
Answer: AB
NEW QUESTION 396
An engineer is configuring Cisco IOS-based MTP for video call. Which requirement must be met?
A. Minimum sessions must be set to 4.
B. Maximum sessions must be set to 100.
C. Passthrough must be enabled.
D. Passthrough must be disabled.
Answer: C
NEW QUESTION 397
Media resources provide which two services? (Choose two.)
A. annunciator
B. codec selection
C. dial peers selection
D. voice activity detection (VAD)
E. music on hold
Answer: AE
NEW QUESTION 398
Which statement best describes the relationship between a route pattern, route group, and route list?
A. Route group are members within a route list, and a route list is assigned to a route pattern.
B. Route list contain a range of route patterns, and route groups contain route lists.
C. Route patterns are assigned to either route lists or route groups.
D. Route lists are members within a route list, and a route group is assigned to a route pattern.
Answer: A
NEW QUESTION 399
What are three features of Cisco Unified Border Element? (Choose three.)
A. Address Hiding
B. Automated Alternate Routing
C. Bandwidth Control
D. Video Integration
E. Protocol Interworking
F. Admission Request
Answer: DEF
NEW QUESTION 400
Which two options can a route pattern be assigned? (Choose two.)
A. a gateway that is assigned to a route group
B. a route list with no route groups configured
C. a gateway
D. a layer 3 switch
E. a route list with one or more route groups configured
Answer: BC
NEW QUESTION 401
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
József Borbás
September 25th, 2019
By the way:
1. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
September 26th, 2019
NEW QUESTION 388
An engineer is developing a new SRST configuration for a branch router using PRI for PSTN access. The engineer is developing a test plan for SRST using this new H.323 gateway. How does the engineer validate that H.323 call routing is working in a failover scenario?
A. When the WAN is down, dial another extension in the office.
B. When the WAN is down, dial an extension at another site in the network.
C. Establish a call through the gateway and drop the WAN link to see if the call is preserved.
D. Establish a call through the gateway, place it on hold, and retrieve it.
E. When the WAN is down, place a new local call and long distance call.
Answer: C
NEW QUESTION 389
When configuring a SIP route pattern, which two provide the basis for routing? (Choose two.)
A. Domain name
B. MAC address
C. IP address
D. Directory number
E. E.164 number
Answer: AC
NEW QUESTION 390
An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two markings can be used for voice traffic? (Choose two.)
A. dscp ef
B. cos 6
C. ip precedence 5
D. dscp 5
E. cos 4
F. ip precedence 3
Answer: AC
NEW QUESTION 391
Which two options are correct description of Media Resources? (Choose two.)
A. Codec-selection
B. Dial peers
C. VAD
D. Music on hold
E. Annunciator
Answer: DE
NEW QUESTION 392
What is the decimal value of DSCP marking Expedited Forwarding?
A. 41
B. 46
C. 34
D. 48
Answer: B
NEW QUESTION 393
Which purpose of the Dialed Number Analyzer within Cisco Unified Communications Manager is true?
A. It provides a way to retrieve only the called number when examining CDR logs.
B. It is used as a troubleshooting tool as it provides an efficient way to analyze the dial plan.
C. It allows the administrator to see the dialed number (DNIS) of a call in real time as the call is being placed.
D. It helps sort and analyze CDR logs.
Answer: B
NEW QUESTION 394
Which component must an engineer configure before configuring SIP route pattern?
A. SIP trunk
B. route filter
C. route partition
D. calling search space
Answer: A
NEW QUESTION 395
Which two devices support voice and video capabilities simultaneously? (Choose two.)
A. Cisco TelePresence Codec C40
B. Cisco 7975 IP phone
C. Cisco 7960 IP phone
D. Intercluster trunk
E. Cisco 7940 IP phone
Answer: AB
NEW QUESTION 396
An engineer is configuring Cisco IOS-based MTP for video call. Which requirement must be met?
A. Minimum sessions must be set to 4.
B. Maximum sessions must be set to 100.
C. Passthrough must be enabled.
D. Passthrough must be disabled.
Answer: C
NEW QUESTION 397
Media resources provide which two services? (Choose two.)
A. annunciator
B. codec selection
C. dial peers selection
D. voice activity detection (VAD)
E. music on hold
Answer: AE
NEW QUESTION 398
Which statement best describes the relationship between a route pattern, route group, and route list?
A. Route group are members within a route list, and a route list is assigned to a route pattern.
B. Route list contain a range of route patterns, and route groups contain route lists.
C. Route patterns are assigned to either route lists or route groups.
D. Route lists are members within a route list, and a route group is assigned to a route pattern.
Answer: A
NEW QUESTION 399
What are three features of Cisco Unified Border Element? (Choose three.)
A. Address Hiding
B. Automated Alternate Routing
C. Bandwidth Control
D. Video Integration
E. Protocol Interworking
F. Admission Request
Answer: DEF
NEW QUESTION 400
Which two options can a route pattern be assigned? (Choose two.)
A. a gateway that is assigned to a route group
B. a route list lzbzbwith no route groups configured
C. a gateway
D. a layer 3 switch
E. a route list with one or more route groups configured
Answer: BC
Passed
September 26th, 2019
Congratulations Passed and get 962
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
tnd.li/b23cm7a9nk
Anonymous
September 26th, 2019
NEW QUESTION 398
Which statement best describes the relationship between a route pattern, route group, and route list?
A. Route group are members within a route list, and a route list is assigned to a route pattern.
B. Route list contain a range of route patterns, and route groups contain route lists.
C. Route patterns are assigned to either route lists or route groups.
D. Route lzjnsists are members within a route list, and a route group is assigned to a route pattern.
Answer: A
Amir Ilbeig
September 30th, 2019
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
Amir Ilbeig
September 30th, 2019
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(500q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
October 1st, 2019
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp qwsconnections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Passed Successfully
October 1st, 2019
Congratulations Passed and get 962/1000
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
tnd.li/b23cm7a9nk
Anonymous
October 1st, 2019
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP dsource for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
randek
October 5th, 2019
Hello,
I passed Cisco 300-085 a few day ago. I would like to make an exchange, with someone who passed 300-080 newly.. The person interested with this exhange please contact with me from belowed address.
randek8 gmail
Alex Tomillero
October 8th, 2019
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
Alex Tomillero
October 8th, 2019
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(500q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
October 16th, 2019
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp caonnections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Free Premium File
October 16th, 2019
Congratulations Passed and get 962/1000
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
split.to/Ds2oI8e
Anonymous
October 16th, 2019
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Aasnalyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
CuriousCat
October 17th, 2019
Has anyone passed recently? Seeing alot of questions in these threads and second guessing the answers.
Example:
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
That should be C. 2 is when DB replication is good
Kruzpe13
October 24th, 2019
I passed my exam with 89X.
I recommend you to check vceguide dot com . Some people have collaborated to fix the answers. Some of these questions appeared on my exam that i didn’t find on any dump
How is Master-Slave determination done between CUCM and H323 GW?
– always originator
– always receiver
– always CUCM
X different for each call (i investigated the answer)
There was a snippet from debug voice ccapi inout something and they were asking which codec is used. I am sure that they were asking for “codec=0x4”. The answer is G729
Where should you navigate to correct the configuration if you see RTMT alarm LocationOutOfBandwidth.
X Location
– Location Bandwidth Manager Group
– Other two options were non-sence
How is Codec negotiation done between CUCM and H.245?
-originating device
-terminating device
X negotiations on each call (I investigated this answer)
-always CUCM
Where the SAF learned patterns can be found?
-RTMT reports > learned patterns
randek
October 24th, 2019
@Kruzpe which dump did you use ? I passed 300-085 a few week ago. If you have the dump 300-080 we can exhange the dumps.. randek8 gmail
Kruzpe13
October 24th, 2019
I used the latest PL dump but some answers are wrong. I recommend you to check vceguide dot com
Corey Johnson
October 28th, 2019
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
Corey Johnson
October 28th, 2019
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(500q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
November 1st, 2019
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(confige)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Full Authentic Dumps
November 1st, 2019
Congratulations Passed and get 962/1000
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
s71.link/b/2PpewCF
Anonymous
November 1st, 2019
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey templatesde with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
Barra Touray
November 4th, 2019
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
Barra Touray
November 4th, 2019
By the way:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(500q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Jack Antoine
November 5th, 2019
ATTENTION!!!
The new PassLeader 300-085 dumps (Updated Recently) now are available, here are part of 300-085 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 285
On Cisco Unified IM & Presence, which two services are essential for providing chat capabilities to the Cisco Jabber client? (Choose two.)
A. Cisco Presence Engine
B. Cisco SIP Proxy
C. Cisco TFTP
D. Cisco Tomcat
E. Cisco Database
Answer: AB
NEW QUESTION 286
The Jabber client uses Expressway for Mobile and Remote Access to remotely connect with Cisco Unified Communications Manager. Which two services are supported for this setup? (Choose two.)
A. deskphone control mode (CTI) (desktop clients only)
B. silent monitoring and call recording
C. UDS directory search
D. LDAP directory search without UDS proxy
E. visual voicemail
Answer: CE
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a video partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmp management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
NEW QUESTION 295
……
P.S.
PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!~~~Updated Recently!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Jack Antoine
November 5th, 2019
What’s More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
kloo
November 6th, 2019
The most favorable price this year!
Dumps for 70% off and Gifts for you.
Free LAB, Free WRITTEN DUMPS.
End this Black Friday Month.
Never too late to Seize this opportunity.
ciscodumps09 dot livejournal dot com/1509.html
Anonymous
November 9th, 2019
NEW QUESTION 286
The Jabber client uses Expressway for Mobile and Remote Access to remotely connect with Cisco Unified Communications Manager. Which two services are supported for this setup? (Choose two.)
A. deskphone control mode (CTI) (desktop clients only)
B. silent monitoring and call recording
C. UDS directory search
D. LDAP directory search without UDS proxy
E. visual voicemail
Answer: CE
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a wevideo partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmp management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
Free File to all
November 9th, 2019
Congratulations Passed and get 962/1000!
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
s71.link/b/2PpewCF
Anonymous
November 9th, 2019
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a wevideo partition.
B. Configure video call handlers.
C. Install the Cisco e2qMediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
Kunal Parmar
November 11th, 2019
ATTENTION!!!
The new PassLeader 300-085 dumps (Updated Recently) now are available, here are part of 300-085 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 285
On Cisco Unified IM & Presence, which two services are essential for providing chat capabilities to the Cisco Jabber client? (Choose two.)
A. Cisco Presence Engine
B. Cisco SIP Proxy
C. Cisco TFTP
D. Cisco Tomcat
E. Cisco Database
Answer: AB
NEW QUESTION 286
The Jabber client uses Expressway for Mobile and Remote Access to remotely connect with Cisco Unified Communications Manager. Which two services are supported for this setup? (Choose two.)
A. deskphone control mode (CTI) (desktop clients only)
B. silent monitoring and call recording
C. UDS directory search
D. LDAP directory search without UDS proxy
E. visual voicemail
Answer: CE
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a video partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmp management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
NEW QUESTION 295
……
P.S.
PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!~~~Updated Recently!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Kunal Parmar
November 11th, 2019
What’s More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Ttrust848
November 12th, 2019
Hi guys
Have valid SPOTO dump for Tshoot test.
Also have some experience and corrected questions in dump.
Inform me in gmail ttrust848
Good luck!
PASS
November 15th, 2019
Hello
anyone has 300-080 full dump 369 Q ?? can share ?
PASS
November 16th, 2019
hello if some one is looking 300-080 , can share= josewebex at gmail
i have the 369q PSL
Kunal Parmar IS FAKE FAKE FAKE
November 18th, 2019
Kunal Parmar IS FAKE FAKE FAKE
Kunal Parmar IS FAKE FAKE FAKE
Anonymous
November 18th, 2019
has someone passed the 300-080 exam, are PL dump 369Q still valid ?
SureshK.
November 18th, 2019
So @Mahsa, have you completed the CAPPS exam? how about giving us some feedback since I believe we helped you give some reviewer… 😀
PASS
November 18th, 2019
i have the pL 369q josewebex gmail
Anonymous
November 25th, 2019
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a video partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmsap management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
PASS
November 25th, 2019
hello if some one is looking 300-080 , can share= josewebex at gmail
i have the 369q PSL update 22 nov 2019
Remove QQ from link and get dumps
November 26th, 2019
Congratulations Passed!
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
s71.link/b/2PpewCF
Anonymous
November 26th, 2019
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in theqsa SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
JKS
November 29th, 2019
anyone looking for 300-080 & 300-085, please i am ready to share fully update with cost.
contact me on lerroyssep at yahoo dot com
Thank you all.
Anonymous
November 29th, 2019
sorry; anyone looking for 300-080 & 300-085, please i am ready to share fully update with NO cost.
contact me on lerroyssep at yahoo dot com
SS
November 30th, 2019
Hello everyone. If someone is taking to do ccnp 300-080 collaboration dumps, I am ready to share spoto dumps. The dumps are latest and valid. 100 % Guarantee. If anyone is willing to take dumps, please email me {email not allowed}. Price only 25 $.
Anonymous
November 30th, 2019
Hello everyone. If someone is taking to do ccnp 300-080 collaboration dumps, I am ready to share spoto dumps. The dumps are latest and valid. 100 % Guarantee. If anyone is willing to take dumps, please email me claudiaschmidt990 at gmail dot com. Price only 25 $.
PASS
December 2nd, 2019
I went to present last Thursday, and do not pass, many new questions come in the exam,
the dump PSL 369Q, I think it is not enough to pass,
I have the updated to December 2, but the new ones do not come
Oji
December 3rd, 2019
Sorry to hear that “PASS”
1.How many new question you faced
2.Can you please share us the new questions
over here to discuss
PASS
December 3rd, 2019
hello
like 30 new questions, many variety, i dont remeber exctly, but if i see again I remeber the questions, the examn is 71 Q passing score 860
Anonymous
December 3rd, 2019
Hello PASS,
I had the 300-080 exam on Thursday too. The same, like 30 new questions, a lot of CLI output and logs. I failed this time :/. Hope to find new dumps, my re-exam is next week on Thursday.
Cheers Anthony
PASS
December 4th, 2019
thats correct CLI outputs , dbreplicaations and logs
Pat
December 4th, 2019
Hello
I had the 300-080 exam today . The same, like 30 new questions I failed also!
Hope to find new dumps.
Anonymous
December 5th, 2019
@ Pat which dump did u use?
pat
December 5th, 2019
passleader 369qa
JAWAD SUMRA
December 9th, 2019
need new questions
JAWAD SUMRA
December 9th, 2019
anyone upload new dumps?
JAWAD SUMRA
December 9th, 2019
thanks!!!
JAWAD SUMRA
December 9th, 2019
please help with new questions
JAWAD SUMRA
December 9th, 2019
thanks all in advance!!!
Jason Wester
December 9th, 2019
Hi!!!
The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 505
Which two Cisco Unified Communications Manager trunk types are supported when configuring Service Advertisement Framework Call Control Discovery? (Choose two.)
A. H.225 trunk (gatekeeper controlled)
B. SIP trunk
C. intercluster trunk (nongatekeeper controlled)
D. intercluster trunk (gatekeeper controlled)
E. T1/E1 PRI trunk
Answer: BC
NEW QUESTION 506
Which must be configured in the DHCP scope to make sure the phones apply configuration changes?
A. option 160
B. option 150
C. option 43
D. option 67
Answer: A
NEW QUESTION 507
Which two statements about Cisco Unified Survivable Remote Site Telephony are correct? (Choose two.)
A. Cisco SRST on a router registers all phones to that remote site router if link to the central Cisco Unified CM cluster is lost.
B. Cisco SRST is to get SIP trunk failover capability for Cisco Unified CM.
C. Using a Cisco router, Cisco SRST can provide failover between these routers to ensure remote site operations.
D. Cisco SRST enables failover between two or more Cisco Unified Communications Manager servers in a cluster if one server is placed at a remote site.
E. Cisco SRST can allow users to make calls with the same dial-plan as if connected to Cisco Unified CM cluster.
Answer: AC
NEW QUESTION 508
Which two are valid service parameter settings that are used to set up proper video QoS behavior across the Cisco Unified Communications Manager infrastructure? (Choose two.)
A. DSCP for Video Signaling when RSVP Fails
B. DSCP for Video Calls when RSVP Fails
C. Default Interregion Max Video Call Bit Rate (Includes Audio)
D. Default Intraregion Min Video Call Bit Rate (Includes Audio)
E. DSCP for Video Signaling
Answer: AC
NEW QUESTION 509
In RTMT, how many concurrent trace collections can you schedule to download the trace files to an SFTP or FTP server on your network?
A. three
B. four
C. five
D. six
Answer: D
NEW QUESTION 511
An engineer is performing an international multisite deployment and wants to create an effective backup method to access TEHO destinations in case of call failure through primary route. Which technology provides this ability?
A. AAR
B. CFUR
C. LRG
D. SRST
Answer: B
NEW QUESTION 512
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
Jason Wester
December 9th, 2019
BTW:
More CCNP Collaboration dumps collection FYI:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(368q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Jason Wester
December 9th, 2019
MORE!!!
The new PassLeader 300-085 dumps (Updated Recently) now are available, here are part of 300-085 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 285
On Cisco Unified IM & Presence, which two services are essential for providing chat capabilities to the Cisco Jabber client? (Choose two.)
A. Cisco Presence Engine
B. Cisco SIP Proxy
C. Cisco TFTP
D. Cisco Tomcat
E. Cisco Database
Answer: AB
NEW QUESTION 286
The Jabber client uses Expressway for Mobile and Remote Access to remotely connect with Cisco Unified Communications Manager. Which two services are supported for this setup? (Choose two.)
A. deskphone control mode (CTI) (desktop clients only)
B. silent monitoring and call recording
C. UDS directory search
D. LDAP directory search without UDS proxy
E. visual voicemail
Answer: CE
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a video partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmp management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
NEW QUESTION 295
……
P.S.
PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!~~~Updated Recently!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Jason Wester
December 9th, 2019
Then:
More CCNP Collaboration dumps collection FYI:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(368q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Anonymous
December 9th, 2019
Does anyone have the latest Spoto dumps that he wants to share?
Thanks in advanced.
PASS
December 10th, 2019
Has anyone recently passed the 300-080 exam?
FAIZAN TARIQ
December 16th, 2019
Hola!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 371
After you upgrade a Cisco Unified Communications Manager cluster, users are unable to log in to their phones. Which two actions must you take to correct the problem? (Choose two.)
A. Reconfigure the Extension Mobility feature on the publisher and rebuild the publisher.
B. Restart the Tomcat services on all servers.
C. Reboot all servers in the cluster.
D. Regenerate the Tomcat.pem certificate on the publisher and each subscriber server.
E. Regenerate the Tomcat.pem certificate on the publisher only.
Answer: BD
NEW QUESTION 372
A user of Cisco Jabber for Windows reports that SIP calls to C series and MX series endpoints registered to Cisco Expressway are dropping after exactly 15 minutes. Which action can resolve the issue?
A. Change the SIP Session Expires Timer to 1800.
B. Increase the bandwidth between Cisco Unified Communications Manager and the Expressway.
C. Change the SIP UDP/IX filter mode to on at the Expressway advanced zone settings.
D. Upgrade the Expressway series to support continuous calls.
Answer: A
NEW QUESTION 373
An engineer is attempting to troubleshoot issues with SAF and wants to understand what patterns are being discovered from SAF. Where does the engineer find this information?
A. in Cisco Unified CM under Call Routing > Route Plan Report
B. in RTMT under Reports > Learned Patterns
C. in RTMT Under Reports > Route Plan
D. in Cisco Unified CM under Call Routing > Call Control Discovery > Advertising Service
Answer: B
NEW QUESTION 374
When viewing the configuration of intercluster Lookup Service, the command is used to look up the URI of a remote cluster user:
“admin:utils ils lookup {email not allowed}
Routing string is cucm1.cisco.com”
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of this remote cluster user? (Choose two.)
A. SIP trunk with destination cucm1.cisco.com
B. SIP route pattern for domain*.cisco.com
C. SIP route pattern for domain*.acme.com
D. end user with directory URI {email not allowed}
Answer: AB
NEW QUESTION 375
An engineer is troubleshooting an inter-site call between two end points where the call is failing and the message “Not Enough Bandwidth” is displayed. Which configuration in Cisco Unified Communications Manager must be adjusted to resolve this issue?
A. route pattern
B. translation pattern
C. Transcoder
D. location
Answer: D
NEW QUESTION 376
Phone A using G.729 is trying to call phone B that only supports G.711, and the phone rings, but the call drops as soon as it is answered. Which cause of the problem is most likely?
A. Mismatch is in the partition and CSS configuration.
B. No conference bridge resource is configured in Cisco Unified CM.
C. No software or hardware transcoding resources are configured in Cisco Unified Communications Manager.
D. No Media Termination Point resource partition is set up on Cisco Unified CM.
Answer: C
NEW QUESTION 377
You have received a notification that the phones in your enterprise are failing to receive configuration updates. Which action should you take to resolve the problem?
A. Download Cisco Call Manager logs.
B. Verify database replication.
C. Reboot the TFTP server.
D. Factory reset of the IP phone.
E. Verify that port monitoring is enabled.
Answer: B
NEW QUESTION 378
How is the role of master determined when H.245 media negotiation takes place between Cisco Unified Communications Manager and an H.323 gateway?
A. always Cisco Unified CM
B. negotiated for each call
C. always terminating side
D. always originating side
Answer: A
NEW QUESTION 379
Which statement about the configuration of a SAF Forwarder in a multisite dial plan is true?
A. In a multisite dial plan, SAF Forwarders are used to store SAF advertisements.
B. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.
C. In a multisite dial plan, SAF Forwarders may periodically broadcast/flood service advertisements.
D. In a multisite dial plan, SAF Forwarders distribute, but they do not maintain SAF service availability information.
Answer: C
NEW QUESTION 380
A Cisco phone displays an error message “Not Enough Bandwidth” when attempting a call. Where in Cisco Unified CM can this problem be resolved?
A. System > Location Info > Location
B. System > Location Info > Location Bandwidth Manager Group
C. System > Region Information > Audio Codec Preference List
D. System > Region Information > Region
Answer: A
NEW QUESTION 381
……
P.S.
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(383q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
FAIZAN TARIQ
December 16th, 2019
BTW:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(413q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Mark
December 17th, 2019
Hi all!
Does anyone have and is willing to share the Official cert guide: 300-080 (CTCOLLAB)?
Much appreciated!
baseballbatboiATabvDOTbg
(convert AT and DOT)
Thanks!
Stephane
December 17th, 2019
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: C
maxime
December 17th, 2019
How is the role of master determined when H.245 media negotiation takes place between Cisco Unified Communications Manager and an H.323 gateway?
A. always Cisco Unified CM
B. negotiated for each call
C. always terminating side
D. always originating side
Answer: the correct answer for me is B
voipguy
December 22nd, 2019
Hi Guys, anyone who will be taking CAPPS or CTCOLLAB soon?
what are the valid dumps and questions now?
Please share v o i p g u y @ g m a i l . c o m
Thank you!
coz
December 23rd, 2019
anyone who can help on this
How is the role of master determined when H.245 media negotiation takes place between CUCM and an H.323 Gateway?
-originating device
-terminating device
-negotiations on each call (I investigated this answer)
-always CUCM
faramir
December 25th, 2019
Any update about the exam ? It would be good to know, how much dumps are valid.
Anonymous
December 29th, 2019
Hello all,
I passed 300-080 exam 4 days ago with newest Spoto dumps :).
I failed 3 weeks ago with PL dumps etc.
If anybody is interested I will share the dumps for 25 $. I will tell the price via e mail.
Write me anakonikekoa25 at gmail dot com
cj
January 2nd, 2020
do you have dumps for 300-085 from Spoto?
COX
January 2nd, 2020
Hi guys I took the 300-080 exam on 1stJan (yesterday) and I passed .
Please be aware that around 35 new questions are added.
-more questions on ISDN and PRI
-Cisco TMS
-Hardware and software transcoding
-PL 383q is not sufficient unless you are experienced on collaboration
NEW QUESTION 364
Which item is mandatory to enable the auto-registration tool?
A. Cisco Unity
B. Cisco DRS
C. Cisco CRS
D. Cisco CME
Answer: C///////////////////////////////////////////
Hello!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
By the way:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(369q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
hey guys. just passed this exam. Most questions on the exam are not found in the recent PL dump. I recommend to still use it for reference, however you will need to utilize a lot of other resources. IMO i think this exam needs to be revised completely. Good luck
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice ddsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Congratulations Passed..
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
Without 2 star**
http:/*/tiny.l*t/rtmrxx4i
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(256q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(369q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Congratulations Passed.
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
Without 1 star***
http:/*/psce.pw/LQUU2
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?????????/
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
hello guys
Today I have done my test
Exam Very easy all questions in Dumps
not difficult at all, do not worry!
Without 1 star***
https:*/**/**priv.sh/PWi4BF2
kloo is fake fake fake
kloo is fake fake fake…. /////////////////
This forum have been quiet for quite some time…Any passers who would like to share their exam experience? Also, any update on valid dumps? Planning to take 300-080 exam after 2 to 3 weeks.
hello everybody
is someone has pdf of book > Troubleshooting Cisco IP Telephony and Video (CTCOLLAB) Foundation Learning Guide (CCNP Collaboration Exam 300-080 CTCOLLAB) send for me . thanks mhs.ebrahimij at gmail dot com
Yeah, please.
Can anybody share pdf book ?
i need also pdf book… please anybody who have the book, kindly share.
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(386q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Hola!
The new PassLeader 300-070 dumps (Updated Recently) now are available, here are part of 300-070 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 385
How is the translated number recorded in the Call Detail Record when a dialed number is manipulated using a translation pattern?
A. It does not display that a call was placed.
B. It shows the translated number and not the originally dialed number.
C. It shows the originally dialed number, not the translated one.
D. It shows only that a call was placed, but not the dialed or translated number.
Answer: B
NEW QUESTION 386
In Cisco Unified Communications Manager, for which type of trunk is URI dialing available?
A. SIP
B. H.323
C. H.225
D. QSIG
Answer: A
NEW QUESTION 387
Through which two configuration elements are off-net calls routed in inbound and outbound direction respectively?
A. Inbound CSS and route groups.
B. Inbound CSS and device pools.
C. Route lists and outgoing CSS.
D. Route patterns and outgoing CSS.
Answer: A
NEW QUESTION 388
An engineer is developing a new SRST configuration for a branch router using PRI for PSTN access. The engineer is developing a test plan for SRST using this new H.323 gateway. How does the engineer validate that H.323 call routing is working in a failover scenario?
A. When the WAN is down, dial another extension in the office.
B. When the WAN is down, dial an extension at another site in the network.
C. Establish a call through the gateway and drop the WAN link to see if the call is preserved.
D. Establish a call through the gateway, place it on hold, and retrieve it.
E. When the WAN is down, place a new local call and long distance call.
Answer: C
NEW QUESTION 389
When configuring a SIP route pattern, which two provide the basis for routing? (Choose two.)
A. Domain name
B. MAC address
C. IP address
D. Directory number
E. E.164 number
Answer: AC
NEW QUESTION 390
An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two markings can be used for voice traffic? (Choose two.)
A. dscp ef
B. cos 6
C. ip precedence 5
D. dscp 5
E. cos 4
F. ip precedence 3
Answer: AC
NEW QUESTION 391
Which two options are correct description of Media Resources? (Choose two.)
A. Codec-selection
B. Dial peers
C. VAD
D. Music on hold
E. Annunciator
Answer: DE
NEW QUESTION 392
What is the decimal value of DSCP marking Expedited Forwarding?
A. 41
B. 46
C. 34
D. 48
Answer: B
NEW QUESTION 393
Which purpose of the Dialed Number Analyzer within Cisco Unified Communications Manager is true?
A. It provides a way to retrieve only the called number when examining CDR logs.
B. It is used as a troubleshooting tool as it provides an efficient way to analyze the dial plan.
C. It allows the administrator to see the dialed number (DNIS) of a call in real time as the call is being placed.
D. It helps sort and analyze CDR logs.
Answer: B
NEW QUESTION 394
Which component must an engineer configure before configuring SIP route pattern?
A. SIP trunk
B. route filter
C. route partition
D. calling search space
Answer: A
NEW QUESTION 395
Which two devices support voice and video capabilities simultaneously? (Choose two.)
A. Cisco TelePresence Codec C40
B. Cisco 7975 IP phone
C. Cisco 7960 IP phone
D. Intercluster trunk
E. Cisco 7940 IP phone
Answer: AB
NEW QUESTION 396
An engineer is configuring Cisco IOS-based MTP for video call. Which requirement must be met?
A. Minimum sessions must be set to 4.
B. Maximum sessions must be set to 100.
C. Passthrough must be enabled.
D. Passthrough must be disabled.
Answer: C
NEW QUESTION 397
Media resources provide which two services? (Choose two.)
A. annunciator
B. codec selection
C. dial peers selection
D. voice activity detection (VAD)
E. music on hold
Answer: AE
NEW QUESTION 398
Which statement best describes the relationship between a route pattern, route group, and route list?
A. Route group are members within a route list, and a route list is assigned to a route pattern.
B. Route list contain a range of route patterns, and route groups contain route lists.
C. Route patterns are assigned to either route lists or route groups.
D. Route lists are members within a route list, and a route group is assigned to a route pattern.
Answer: A
NEW QUESTION 399
What are three features of Cisco Unified Border Element? (Choose three.)
A. Address Hiding
B. Automated Alternate Routing
C. Bandwidth Control
D. Video Integration
E. Protocol Interworking
F. Admission Request
Answer: DEF
NEW QUESTION 400
Which two options can a route pattern be assigned? (Choose two.)
A. a gateway that is assigned to a route group
B. a route list with no route groups configured
C. a gateway
D. a layer 3 switch
E. a route list with one or more route groups configured
Answer: BC
NEW QUESTION 401
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
By the way:
1. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 388
An engineer is developing a new SRST configuration for a branch router using PRI for PSTN access. The engineer is developing a test plan for SRST using this new H.323 gateway. How does the engineer validate that H.323 call routing is working in a failover scenario?
A. When the WAN is down, dial another extension in the office.
B. When the WAN is down, dial an extension at another site in the network.
C. Establish a call through the gateway and drop the WAN link to see if the call is preserved.
D. Establish a call through the gateway, place it on hold, and retrieve it.
E. When the WAN is down, place a new local call and long distance call.
Answer: C
NEW QUESTION 389
When configuring a SIP route pattern, which two provide the basis for routing? (Choose two.)
A. Domain name
B. MAC address
C. IP address
D. Directory number
E. E.164 number
Answer: AC
NEW QUESTION 390
An engineer is configuring QoS for a Cisco Unified Communications Manager implementation. Which two markings can be used for voice traffic? (Choose two.)
A. dscp ef
B. cos 6
C. ip precedence 5
D. dscp 5
E. cos 4
F. ip precedence 3
Answer: AC
NEW QUESTION 391
Which two options are correct description of Media Resources? (Choose two.)
A. Codec-selection
B. Dial peers
C. VAD
D. Music on hold
E. Annunciator
Answer: DE
NEW QUESTION 392
What is the decimal value of DSCP marking Expedited Forwarding?
A. 41
B. 46
C. 34
D. 48
Answer: B
NEW QUESTION 393
Which purpose of the Dialed Number Analyzer within Cisco Unified Communications Manager is true?
A. It provides a way to retrieve only the called number when examining CDR logs.
B. It is used as a troubleshooting tool as it provides an efficient way to analyze the dial plan.
C. It allows the administrator to see the dialed number (DNIS) of a call in real time as the call is being placed.
D. It helps sort and analyze CDR logs.
Answer: B
NEW QUESTION 394
Which component must an engineer configure before configuring SIP route pattern?
A. SIP trunk
B. route filter
C. route partition
D. calling search space
Answer: A
NEW QUESTION 395
Which two devices support voice and video capabilities simultaneously? (Choose two.)
A. Cisco TelePresence Codec C40
B. Cisco 7975 IP phone
C. Cisco 7960 IP phone
D. Intercluster trunk
E. Cisco 7940 IP phone
Answer: AB
NEW QUESTION 396
An engineer is configuring Cisco IOS-based MTP for video call. Which requirement must be met?
A. Minimum sessions must be set to 4.
B. Maximum sessions must be set to 100.
C. Passthrough must be enabled.
D. Passthrough must be disabled.
Answer: C
NEW QUESTION 397
Media resources provide which two services? (Choose two.)
A. annunciator
B. codec selection
C. dial peers selection
D. voice activity detection (VAD)
E. music on hold
Answer: AE
NEW QUESTION 398
Which statement best describes the relationship between a route pattern, route group, and route list?
A. Route group are members within a route list, and a route list is assigned to a route pattern.
B. Route list contain a range of route patterns, and route groups contain route lists.
C. Route patterns are assigned to either route lists or route groups.
D. Route lists are members within a route list, and a route group is assigned to a route pattern.
Answer: A
NEW QUESTION 399
What are three features of Cisco Unified Border Element? (Choose three.)
A. Address Hiding
B. Automated Alternate Routing
C. Bandwidth Control
D. Video Integration
E. Protocol Interworking
F. Admission Request
Answer: DEF
NEW QUESTION 400
Which two options can a route pattern be assigned? (Choose two.)
A. a gateway that is assigned to a route group
B. a route list lzbzbwith no route groups configured
C. a gateway
D. a layer 3 switch
E. a route list with one or more route groups configured
Answer: BC
Congratulations Passed and get 962
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
tnd.li/b23cm7a9nk
NEW QUESTION 398
Which statement best describes the relationship between a route pattern, route group, and route list?
A. Route group are members within a route list, and a route list is assigned to a route pattern.
B. Route list contain a range of route patterns, and route groups contain route lists.
C. Route patterns are assigned to either route lists or route groups.
D. Route lzjnsists are members within a route list, and a route group is assigned to a route pattern.
Answer: A
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(500q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp qwsconnections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Congratulations Passed and get 962/1000
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
tnd.li/b23cm7a9nk
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP dsource for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
Hello,
I passed Cisco 300-085 a few day ago. I would like to make an exchange, with someone who passed 300-080 newly.. The person interested with this exhange please contact with me from belowed address.
randek8 gmail
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(500q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp caonnections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Congratulations Passed and get 962/1000
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
split.to/Ds2oI8e
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Aasnalyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
Has anyone passed recently? Seeing alot of questions in these threads and second guessing the answers.
Example:
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
That should be C. 2 is when DB replication is good
I passed my exam with 89X.
I recommend you to check vceguide dot com . Some people have collaborated to fix the answers. Some of these questions appeared on my exam that i didn’t find on any dump
How is Master-Slave determination done between CUCM and H323 GW?
– always originator
– always receiver
– always CUCM
X different for each call (i investigated the answer)
There was a snippet from debug voice ccapi inout something and they were asking which codec is used. I am sure that they were asking for “codec=0x4”. The answer is G729
Where should you navigate to correct the configuration if you see RTMT alarm LocationOutOfBandwidth.
X Location
– Location Bandwidth Manager Group
– Other two options were non-sence
How is Codec negotiation done between CUCM and H.245?
-originating device
-terminating device
X negotiations on each call (I investigated this answer)
-always CUCM
Where the SAF learned patterns can be found?
-RTMT reports > learned patterns
@Kruzpe which dump did you use ? I passed 300-085 a few week ago. If you have the dump 300-080 we can exhange the dumps.. randek8 gmail
I used the latest PL dump but some answers are wrong. I recommend you to check vceguide dot com
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
BTW:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(500q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 347
Which of the following debugs can be used to troubleshoot transcoder registration issues?
A. Debug sccp messages
B. Debug mgcp packets
C. Debug ccsip messages
D. Debug h225 q931
Answer: C
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(confige)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
Congratulations Passed and get 962/1000
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
s71.link/b/2PpewCF
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey templatesde with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
Hi!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: B
NEW QUESTION 349
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Answer: C
NEW QUESTION 351
What is the most typical issue that causes a call setup to fail within a single site?
A. A translation pattern is configured as urgent.
B. Caller ID is missing or incorrect.
C. Incorrect CoS settings such as CSSs and route partitions.
D. Destination is a shared line.
Answer: C
NEW QUESTION 352
Which problem would never cause a multisite intracluster call to fail?
A. A codec mismatch between the two endpoints.
B. CoS settings on the endpoints.
C. Incorrect digit manipulation.
D. Lack of required media resource.
E. A codec match between the two endpoints.
Answer: E
NEW QUESTION 353
Which two options describe possible causes for a cluster not advertising information to other clusters? (Choose two.)
A. Blocked patterns at the advertising cluster.
B. Blocked numbers at the advertising cluster.
C. Blocked URIs at the advertising cluster.
D. Blocked patterns at the receiving cluster.
E. GDPR is not enabled.
F. Cluster is configured with a wrong password.
Answer: EF
NEW QUESTION 354
Which configuration element is not used to implement Unified Mobility?
A. Softkey templates
B. User accounts
C. Access lists
D. Remote destination profiles
E. Remote destinations
F. Enterprise parameters
Answer: F
NEW QUESTION 355
The user finds that the Mobility button does not exist on the office phone. Which is the most probable cause?
A. The user who is enabled for Mobile Connect may not be properly associated with the office phone device.
B. The office phone device is not enabled for Mobile Connect.
C. The softkey template with the Mobility button is not attached to the office phone device.
D. The Mobile Connect service has not been activated.
Answer: C
NEW QUESTION 356
An engineer is troubleshooting an SIP call between two different sites where a call drops at even intervals every 15 minutes. Which cause of the issue is true?
A. The SIP session expire timer is set too low on Cisco Unified Communications Manager.
B. The QoS configuration on the routers is inadequate.
C. The WAN link between the sites is experiencing excessive packet loss.
D. The TCP timeout is set too low on one of the network devices.
Answer: A
NEW QUESTION 359
An external call is dropped as soon as it is picked up by the SCCP IP phone. The PSTN gateway is integrated with Cisco Unified Communication Manager using a SIP trunk. What is a cause of the issue?
A. The incorrect CSS is on the SIP trunk to the PSTN gateway.
B. There is a missing MTP source for the SCCP IP phone.
C. The phone number is in the incorrect partition.
D. There are insufficient DSP resources on the PSTN gateways.
Answer: D
NEW QUESTION 360
Which two of the following items are the gateway supplementary services? (Choose two.)
A. Hold
B. DTMF relay
C. Transfer
D. Transcoding
Answer: AC
NEW QUESTION 361
As a network technician, you should know the VoIP network components well. Which one of the following components can provide the CAC, bandwidth control and management, and address translation?
A. Gateway
B. Gatekeeper
C. MCU
D. Call agent
Answer: B
NEW QUESTION 362
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output.
B. Cisco IOS debug commands.
C. Dialed Number Analyzer output.
D. Cisco Unified Communications Manager alerts.
E. Cisco IOS show commands.
Answer: BE
NEW QUESTION 363
A user is dialing 1000 to reach a local PSTN destination and the call is not successful. Which command does an engineer execute on the PSTN Gateway to see how the call is routed?
A. voiceGWay(config)# show dialplan number 1000
B. voiceGWay(config)# show all voip dialpeer
C. voiceGWay(config)# show sip 1000 voip dialpeer
D. voiceGWay(config)# show version
Answer: A
NEW QUESTION 364
Which of the following commands can be used to push configuration from the master VCS to the non-master peers in a cluster?
A. xcommand ForceConfigUpdate master
B. xcommand ForceConfiguration
C. xcommand ConfigUpdate
D. xcommand ForceConfigUpdate
Answer: A
NEW QUESTION 365
Which of the following commands can be used to troubleshoot one-way audio issues in outbound calls? (Choose two)
A. show voice dsp group all
B. show voip rtp connections
C. show dspfarm dsp active
D. show call active voice brief
Answer: BC
NEW QUESTION 366
……
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369Q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
By the way:
1. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(283q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(500q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
ATTENTION!!!
The new PassLeader 300-085 dumps (Updated Recently) now are available, here are part of 300-085 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 285
On Cisco Unified IM & Presence, which two services are essential for providing chat capabilities to the Cisco Jabber client? (Choose two.)
A. Cisco Presence Engine
B. Cisco SIP Proxy
C. Cisco TFTP
D. Cisco Tomcat
E. Cisco Database
Answer: AB
NEW QUESTION 286
The Jabber client uses Expressway for Mobile and Remote Access to remotely connect with Cisco Unified Communications Manager. Which two services are supported for this setup? (Choose two.)
A. deskphone control mode (CTI) (desktop clients only)
B. silent monitoring and call recording
C. UDS directory search
D. LDAP directory search without UDS proxy
E. visual voicemail
Answer: CE
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a video partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmp management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
NEW QUESTION 295
……
P.S.
PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!~~~Updated Recently!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
What’s More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
The most favorable price this year!
Dumps for 70% off and Gifts for you.
Free LAB, Free WRITTEN DUMPS.
End this Black Friday Month.
Never too late to Seize this opportunity.
ciscodumps09 dot livejournal dot com/1509.html
NEW QUESTION 286
The Jabber client uses Expressway for Mobile and Remote Access to remotely connect with Cisco Unified Communications Manager. Which two services are supported for this setup? (Choose two.)
A. deskphone control mode (CTI) (desktop clients only)
B. silent monitoring and call recording
C. UDS directory search
D. LDAP directory search without UDS proxy
E. visual voicemail
Answer: CE
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a wevideo partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmp management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
Congratulations Passed and get 962/1000!
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
s71.link/b/2PpewCF
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a wevideo partition.
B. Configure video call handlers.
C. Install the Cisco e2qMediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
ATTENTION!!!
The new PassLeader 300-085 dumps (Updated Recently) now are available, here are part of 300-085 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 285
On Cisco Unified IM & Presence, which two services are essential for providing chat capabilities to the Cisco Jabber client? (Choose two.)
A. Cisco Presence Engine
B. Cisco SIP Proxy
C. Cisco TFTP
D. Cisco Tomcat
E. Cisco Database
Answer: AB
NEW QUESTION 286
The Jabber client uses Expressway for Mobile and Remote Access to remotely connect with Cisco Unified Communications Manager. Which two services are supported for this setup? (Choose two.)
A. deskphone control mode (CTI) (desktop clients only)
B. silent monitoring and call recording
C. UDS directory search
D. LDAP directory search without UDS proxy
E. visual voicemail
Answer: CE
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a video partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmp management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
NEW QUESTION 295
……
P.S.
PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!~~~Updated Recently!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
What’s More:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(369q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Hi guys
Have valid SPOTO dump for Tshoot test.
Also have some experience and corrected questions in dump.
Inform me in gmail ttrust848
Good luck!
Hello
anyone has 300-080 full dump 369 Q ?? can share ?
hello if some one is looking 300-080 , can share= josewebex at gmail
i have the 369q PSL
Kunal Parmar IS FAKE FAKE FAKE
Kunal Parmar IS FAKE FAKE FAKE
has someone passed the 300-080 exam, are PL dump 369Q still valid ?
So @Mahsa, have you completed the CAPPS exam? how about giving us some feedback since I believe we helped you give some reviewer… 😀
i have the pL 369q josewebex gmail
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a video partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmsap management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
hello if some one is looking 300-080 , can share= josewebex at gmail
i have the 369q PSL update 22 nov 2019
Congratulations Passed!
D&D are valid no new one in my test
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP
open link and get dumps
s71.link/b/2PpewCF
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in theqsa SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
anyone looking for 300-080 & 300-085, please i am ready to share fully update with cost.
contact me on lerroyssep at yahoo dot com
Thank you all.
sorry; anyone looking for 300-080 & 300-085, please i am ready to share fully update with NO cost.
contact me on lerroyssep at yahoo dot com
Hello everyone. If someone is taking to do ccnp 300-080 collaboration dumps, I am ready to share spoto dumps. The dumps are latest and valid. 100 % Guarantee. If anyone is willing to take dumps, please email me {email not allowed}. Price only 25 $.
Hello everyone. If someone is taking to do ccnp 300-080 collaboration dumps, I am ready to share spoto dumps. The dumps are latest and valid. 100 % Guarantee. If anyone is willing to take dumps, please email me claudiaschmidt990 at gmail dot com. Price only 25 $.
I went to present last Thursday, and do not pass, many new questions come in the exam,
the dump PSL 369Q, I think it is not enough to pass,
I have the updated to December 2, but the new ones do not come
Sorry to hear that “PASS”
1.How many new question you faced
2.Can you please share us the new questions
over here to discuss
hello
like 30 new questions, many variety, i dont remeber exctly, but if i see again I remeber the questions, the examn is 71 Q passing score 860
Hello PASS,
I had the 300-080 exam on Thursday too. The same, like 30 new questions, a lot of CLI output and logs. I failed this time :/. Hope to find new dumps, my re-exam is next week on Thursday.
Cheers Anthony
thats correct CLI outputs , dbreplicaations and logs
Hello
I had the 300-080 exam today . The same, like 30 new questions I failed also!
Hope to find new dumps.
@ Pat which dump did u use?
passleader 369qa
need new questions
anyone upload new dumps?
thanks!!!
please help with new questions
thanks all in advance!!!
Hi!!!
The new PassLeader 300-075 dumps (Updated Recently) now are available, here are part of 300-075 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 505
Which two Cisco Unified Communications Manager trunk types are supported when configuring Service Advertisement Framework Call Control Discovery? (Choose two.)
A. H.225 trunk (gatekeeper controlled)
B. SIP trunk
C. intercluster trunk (nongatekeeper controlled)
D. intercluster trunk (gatekeeper controlled)
E. T1/E1 PRI trunk
Answer: BC
NEW QUESTION 506
Which must be configured in the DHCP scope to make sure the phones apply configuration changes?
A. option 160
B. option 150
C. option 43
D. option 67
Answer: A
NEW QUESTION 507
Which two statements about Cisco Unified Survivable Remote Site Telephony are correct? (Choose two.)
A. Cisco SRST on a router registers all phones to that remote site router if link to the central Cisco Unified CM cluster is lost.
B. Cisco SRST is to get SIP trunk failover capability for Cisco Unified CM.
C. Using a Cisco router, Cisco SRST can provide failover between these routers to ensure remote site operations.
D. Cisco SRST enables failover between two or more Cisco Unified Communications Manager servers in a cluster if one server is placed at a remote site.
E. Cisco SRST can allow users to make calls with the same dial-plan as if connected to Cisco Unified CM cluster.
Answer: AC
NEW QUESTION 508
Which two are valid service parameter settings that are used to set up proper video QoS behavior across the Cisco Unified Communications Manager infrastructure? (Choose two.)
A. DSCP for Video Signaling when RSVP Fails
B. DSCP for Video Calls when RSVP Fails
C. Default Interregion Max Video Call Bit Rate (Includes Audio)
D. Default Intraregion Min Video Call Bit Rate (Includes Audio)
E. DSCP for Video Signaling
Answer: AC
NEW QUESTION 509
In RTMT, how many concurrent trace collections can you schedule to download the trace files to an SFTP or FTP server on your network?
A. three
B. four
C. five
D. six
Answer: D
NEW QUESTION 511
An engineer is performing an international multisite deployment and wants to create an effective backup method to access TEHO destinations in case of call failure through primary route. Which technology provides this ability?
A. AAR
B. CFUR
C. LRG
D. SRST
Answer: B
NEW QUESTION 512
……
P.S.
PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
BTW:
More CCNP Collaboration dumps collection FYI:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(368q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
MORE!!!
The new PassLeader 300-085 dumps (Updated Recently) now are available, here are part of 300-085 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 285
On Cisco Unified IM & Presence, which two services are essential for providing chat capabilities to the Cisco Jabber client? (Choose two.)
A. Cisco Presence Engine
B. Cisco SIP Proxy
C. Cisco TFTP
D. Cisco Tomcat
E. Cisco Database
Answer: AB
NEW QUESTION 286
The Jabber client uses Expressway for Mobile and Remote Access to remotely connect with Cisco Unified Communications Manager. Which two services are supported for this setup? (Choose two.)
A. deskphone control mode (CTI) (desktop clients only)
B. silent monitoring and call recording
C. UDS directory search
D. LDAP directory search without UDS proxy
E. visual voicemail
Answer: CE
NEW QUESTION 287
Which two dial plan flexibility features can be enabled in Cisco Unity Connection through the use of partitions and search spaces?
A. disable identical user messaging
B. overlap sending
C. overlapping extensions
D. calling party normalization
E. multitenant configurations
Answer: CE
NEW QUESTION 288
A company that wants to deploy Cisco Jabber is deciding whether to use UDS or EDI for contact resolution. Which two pieces of information should the company consider? (Choose two.)
A. EDI is the contact source that is used for Cisco Expressway Mobile and Remote Access.
B. Cisco Unified Communication Manager needs to be integrated with the LDAP server through both UDS and EDI.
C. SSO cannot be used with UDS.
D. With EDI, Active Directory is the only LDAP server that can be used.
E. EDI uses native Windows APIs to retrieve contact data from the directory service.
Answer: BE
NEW QUESTION 289
Which two call management capabilities are valid? (Choose two.)
A. interview handlers
B. directory handlers
C. operator handlers
D. receptionist handlers
E. system handlers
Answer: AB
NEW QUESTION 290
You want to configure voicemail-to-email on Cisco Unity Express to send a copy of voicemail messages to an external server. You try to add the email address to a user profile and receive an alert that “system- wide notification has been disabled”. Which two actions must you take to fix this issue? (Choose two.)
A. Enable integrated messaging in the service configuration.
B. Enable the user account in the SMTP server settings.
C. Configure the Outgoing E-mail From address under VM Configuration.
D. Complete the SMTP Configuration under System Settings.
E. Select Enable System-Wide Notifications for all Messages under Notification Administration.
Answer: DE
NEW QUESTION 291
What is needed to configure VCS Control and TMS for Cisco Jabber Video for TelePresence and other Cisco Jabber clients for Collaboration Edge Deployments?
A. SIP search rules must be configured.
B. Cisco Jabber must be enabled on Cisco VCS.
C. H.323 support must be enabled.
D. Interworking must be enabled on VCS Control.
Answer: B
NEW QUESTION 292
Which two steps appear in the task list for configuring video greetings in Cisco Unity Connection? (Choose two.)
A. Configure a video partition.
B. Configure video call handlers.
C. Install the Cisco MediaSense video server.
D. Configure video media termination points.
E. Enable video greetings through class of service.
Answer: CE
NEW QUESTION 293
Which two commands are useful to display the SNMP and management data activity on Cisco Unity Express? (Choose two.)
A. show system details
B. trace snmp
C. show snmp management
D. show network snmp management
E. trace management
Answer: BE
NEW QUESTION 294
An engineer must change a parameter when configuring BFCP with Cisco Expressway. Where must this change be made?
A. Expressway zone
B. Port zone
C. IP zone
D. Cisco Unified Communications Manager zone
Answer: A
NEW QUESTION 295
……
P.S.
PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!~~~Updated Recently!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Then:
More CCNP Collaboration dumps collection FYI:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(401q~~~NEW VERSION DUMPS!!!)
And,
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(368q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Does anyone have the latest Spoto dumps that he wants to share?
Thanks in advanced.
Has anyone recently passed the 300-080 exam?
Hola!
The new PassLeader 300-080 dumps (Updated Recently) now are available, here are part of 300-080 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 371
After you upgrade a Cisco Unified Communications Manager cluster, users are unable to log in to their phones. Which two actions must you take to correct the problem? (Choose two.)
A. Reconfigure the Extension Mobility feature on the publisher and rebuild the publisher.
B. Restart the Tomcat services on all servers.
C. Reboot all servers in the cluster.
D. Regenerate the Tomcat.pem certificate on the publisher and each subscriber server.
E. Regenerate the Tomcat.pem certificate on the publisher only.
Answer: BD
NEW QUESTION 372
A user of Cisco Jabber for Windows reports that SIP calls to C series and MX series endpoints registered to Cisco Expressway are dropping after exactly 15 minutes. Which action can resolve the issue?
A. Change the SIP Session Expires Timer to 1800.
B. Increase the bandwidth between Cisco Unified Communications Manager and the Expressway.
C. Change the SIP UDP/IX filter mode to on at the Expressway advanced zone settings.
D. Upgrade the Expressway series to support continuous calls.
Answer: A
NEW QUESTION 373
An engineer is attempting to troubleshoot issues with SAF and wants to understand what patterns are being discovered from SAF. Where does the engineer find this information?
A. in Cisco Unified CM under Call Routing > Route Plan Report
B. in RTMT under Reports > Learned Patterns
C. in RTMT Under Reports > Route Plan
D. in Cisco Unified CM under Call Routing > Call Control Discovery > Advertising Service
Answer: B
NEW QUESTION 374
When viewing the configuration of intercluster Lookup Service, the command is used to look up the URI of a remote cluster user:
“admin:utils ils lookup {email not allowed}
Routing string is cucm1.cisco.com”
Which configuration is required on Cisco Unified Communications Manager, in order to allow routing calls to the URI of this remote cluster user? (Choose two.)
A. SIP trunk with destination cucm1.cisco.com
B. SIP route pattern for domain*.cisco.com
C. SIP route pattern for domain*.acme.com
D. end user with directory URI {email not allowed}
Answer: AB
NEW QUESTION 375
An engineer is troubleshooting an inter-site call between two end points where the call is failing and the message “Not Enough Bandwidth” is displayed. Which configuration in Cisco Unified Communications Manager must be adjusted to resolve this issue?
A. route pattern
B. translation pattern
C. Transcoder
D. location
Answer: D
NEW QUESTION 376
Phone A using G.729 is trying to call phone B that only supports G.711, and the phone rings, but the call drops as soon as it is answered. Which cause of the problem is most likely?
A. Mismatch is in the partition and CSS configuration.
B. No conference bridge resource is configured in Cisco Unified CM.
C. No software or hardware transcoding resources are configured in Cisco Unified Communications Manager.
D. No Media Termination Point resource partition is set up on Cisco Unified CM.
Answer: C
NEW QUESTION 377
You have received a notification that the phones in your enterprise are failing to receive configuration updates. Which action should you take to resolve the problem?
A. Download Cisco Call Manager logs.
B. Verify database replication.
C. Reboot the TFTP server.
D. Factory reset of the IP phone.
E. Verify that port monitoring is enabled.
Answer: B
NEW QUESTION 378
How is the role of master determined when H.245 media negotiation takes place between Cisco Unified Communications Manager and an H.323 gateway?
A. always Cisco Unified CM
B. negotiated for each call
C. always terminating side
D. always originating side
Answer: A
NEW QUESTION 379
Which statement about the configuration of a SAF Forwarder in a multisite dial plan is true?
A. In a multisite dial plan, SAF Forwarders are used to store SAF advertisements.
B. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.
C. In a multisite dial plan, SAF Forwarders may periodically broadcast/flood service advertisements.
D. In a multisite dial plan, SAF Forwarders distribute, but they do not maintain SAF service availability information.
Answer: C
NEW QUESTION 380
A Cisco phone displays an error message “Not Enough Bandwidth” when attempting a call. Where in Cisco Unified CM can this problem be resolved?
A. System > Location Info > Location
B. System > Location Info > Location Bandwidth Manager Group
C. System > Region Information > Audio Codec Preference List
D. System > Region Information > Region
Answer: A
NEW QUESTION 381
……
P.S.
PassLeader 300-080 dumps FYI:
od.lk/fl/NjFfMTUyNjExM18
(383q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy the short link and open it in your web browser!!!)]
BTW:
1. PassLeader 300-070 dumps FYI:
od.lk/fl/NjFfMTUyNjEwOV8
(413q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-075 dumps FYI:
od.lk/fl/NjFfMTUyNjExMF8
(514q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-085 dumps FYI:
od.lk/fl/NjFfMTUyNjExNF8
(295q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Hi all!
Does anyone have and is willing to share the Official cert guide: 300-080 (CTCOLLAB)?
Much appreciated!
baseballbatboiATabvDOTbg
(convert AT and DOT)
Thanks!
NEW QUESTION 348
Which RTMT state value means that the database replication between all the nodes in a CUCM Cluster is good?
A. 4
B. 0
C. 2
D. 3
Answer: C
How is the role of master determined when H.245 media negotiation takes place between Cisco Unified Communications Manager and an H.323 gateway?
A. always Cisco Unified CM
B. negotiated for each call
C. always terminating side
D. always originating side
Answer: the correct answer for me is B
Hi Guys, anyone who will be taking CAPPS or CTCOLLAB soon?
what are the valid dumps and questions now?
Please share v o i p g u y @ g m a i l . c o m
Thank you!
anyone who can help on this
How is the role of master determined when H.245 media negotiation takes place between CUCM and an H.323 Gateway?
-originating device
-terminating device
-negotiations on each call (I investigated this answer)
-always CUCM
Any update about the exam ? It would be good to know, how much dumps are valid.
Hello all,
I passed 300-080 exam 4 days ago with newest Spoto dumps :).
I failed 3 weeks ago with PL dumps etc.
If anybody is interested I will share the dumps for 25 $. I will tell the price via e mail.
Write me anakonikekoa25 at gmail dot com
do you have dumps for 300-085 from Spoto?
Hi guys I took the 300-080 exam on 1stJan (yesterday) and I passed .
Please be aware that around 35 new questions are added.
-more questions on ISDN and PRI
-Cisco TMS
-Hardware and software transcoding
-PL 383q is not sufficient unless you are experienced on collaboration