hello all, any one have the dumps 300-085 with 246 q ??
Please !!!!!!!!!!
jay
October 9th, 2018
Pamir G, Ridgap, Don D,
could you please share the dumps with me as well?
jubert dot thegeek at gmail dot com
jay
October 9th, 2018
junjun911,
could you please share the dumps with me as well?
jubert dot thegeek at gmail dot com
Techh
October 10th, 2018
NEW QUESTION 1
How many TelePresence MCU conference bridges can be configured in one conference bridge pool in a TelePresence Conductor cluster?
A. 12
B. 24
C. 30
D. 36
Answer: C
NEW QUESTION 2
Which two are characteristics of a Cisco Unified Communications Manager software based Media Termination Point? (Choose two.)
A. This Media Termination Point type is typically used for RSVP agent configurations or Cisco Unified Border Element media flow-through configurations.
B. The codec and packetization of both call legs must be identical.
C. DSP resources are required.
D. This Media Termination Point type does not require any DSP resources on the Cisco router.
E. It can provide G.711 mu-law to G.711 a-law conversion and vice versa.
Answer: DE
NEW QUESTION 3
An engineer has hundreds of H.323 gateways with thousands of route patterns in a Cisco Unified Communications Manager cluster. The engineer has noticed may specific route patterns created to the H.323 gateways. Which digit manipulation method on route patterns is most effective in reducing the number of route patterns?
A. regular expressions
B. discard digits
C. prefix digits
D. called-party transform mask
Answer: A
NEW QUESTION 4
Which two CLI commands allow you to verify the correct VolP dial-peer matching? (Choose two.)
A. debug voip dialpeer inout
B. show dialplan number
C. debug dialpeer match
D. debug ccsip messages
E. debug voip ccapi service
Answer: AB
NEW QUESTION 5
How does Cisco Unified Cisco Unified Communications Manager perform digit analysis?
A. Perform a digit-by-digit analysis to find the best matching route pattern within the partition list in the calling search space of a device.
B. Use a set of route lists and filters to match all collected digits of a dialed number.
C. Perform a digit-by-digit analysis to find the best matching route pattern based on a devices partition.
D. Send all collected digits through the Dialed Number Analyzer to determine the best call routing match within Cisco Unified CM.
Answer: A
NEW QUESTION 6
When a user dials a telephone number from a Type A SIP phone. How are the digits analyzed by Cisco Unified Communications Manager if no SIP dial rules are configured?
A. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager en bloc.
B. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager digit-by-digit.
C. With a Type A SIP phone the digits are only sent en bloc.
D. If there are no dial rules present and the user uses the Dial softkey the digits are sent to the Cisco Unified Communications Manager digit-by-digit.
Answer: A
NEW QUESTION 7
Which two options are available when configuring a POTS dial peer? (Choose two.)
A. preference
B. voice-class codec
C. VAD
D. answer-address
E. codec
Answer: AD
kreemo
October 10th, 2018
Dump spoto is valid , i passd today
junjun911
October 10th, 2018
Kreemo was this test the Spoto 300-085 dump?
Florence
October 10th, 2018
Hi Kreemo, can you please share your dumps? florence dot matalis at gmail dot com. Thank you!
M123
October 10th, 2018
@@ Kreemo can give me the dumps spoto please !!!!!!
my email: mh1475896(at)gmail(dot)com
M123
October 11th, 2018
Hello all ,
I need the valid dumps 300-085 and 300-080 , can you give me please !!!!!
email: mh1475896(at)gmail(dot)com
urgent plaese !!!!!!!!!!!!
good cat
October 11th, 2018
Hello junjun911!
Could you send dumps 300-080, please ?
artem.1.00 (at) list (dot) ru
kreemo
October 11th, 2018
kreemo83(at)hotmail(dot)com
good-boy
October 11th, 2018
Hi junjun911,
can you please send dump for 300-080?
Email: kamerainputbg(at)gmail(dot)com
Thank you very much!
good cat
October 12th, 2018
Hello William Vinopal!
Could you send dumps 300-080, please ?
artem.1.00 (at) list (dot) ru
Aleksi17
October 12th, 2018
Hi William,
could you please share the dumps? aleksi at musician dot org
Thanks
M123
October 12th, 2018
@@ William Vinopal could you send me the valid dumps in my email: mh1475896(at)gmail(dot)com
thanks in advance
good-boy
October 12th, 2018
can you please send dump for 300-080?
Email: kamerainputbg(at)gmail(dot)com
Thank you very much!
Anonymous
October 13th, 2018
NEW QUESTION 2
Which two are characteristics of a Cisco Unified Communications Manager software based Media Termination Point? (Choose two.)
A. This Media Termination Point type is typically used for RSVP agent configurations or Cisco Unified Border Element media flow-through configurations.
B. The codec and packetization of both call legs must be identical.
C. DSP resources are required.
D. This Media Termination Point type does not require any DSP resources on the Cisco router.
E. It can provide G.711 mu-law to G.711 a-law conversion and vice versa.
Answer: DE
NEW QUESTION 3
An engineer has hundreds of H.323 gateways with thousands of route patterns in a Cisco Unified Communications Manager cluster. The engineer has noticed may specific route patterns created to the H.323 gateways. Which digit manipulation method on route patterns is most effective in reducing the number of route patterns?
A. regular expressions
B. discard digits
C. prefix digits
D. called-party transform mask
Answer: A
NEW QUESTION 4
Which two CLI commands allow you to verify the correct VolP dial-peer matching? (Choose two.)
A. debug voip dialpeer inout
B. show dialplan number
C. debug dialpeer match
D. debug ccsip messages
E. debug voip ccapi service
Answer: AB
NEW QUESTION 5
How does Cisco Unified Cisco Unified Communications Manager perform digit analysis?
A. Perform a digit-by-digit analysis to find the best matching route pattern within the partition list in the calling search space of a device.
B. Use a set of route lists and filters to match all collected digits of a dialed number.
C. Perform a digit-by-digit analysis to find the best matching route pattern based on a devices partition.
D. Send all collected digits through the Dialed Number Analyzer to determine the best call routing match within Cisco Unified CM.
Answer: A
NEW QUESTION 6
When a user dials a telephone number from a Type A SIP phone. How are the digits analyzed by Cisco Unified Communications Manager if no SIP dial rules are configured?
A. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager en bloc.
B. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager digit-by-digit.
C. With a Type A SIP phone the digits are only sent en bloc.
D. If there are no dial rules present and the user uses the Dial softkey the digits are sent to the Cisco Unified Communications Manager digit-by-digit.
Answer: A
M123
October 14th, 2018
@ Anonymous can you send me the dumps in my email:
mh1475896(at)gmail(dot)com
Anonymous
October 15th, 2018
NEW QUESTION 2
Which two are characteristics of a Cisco Unified Communications Manager software based Media Termination Point? (Choose two.)
A. This Media Termination Point type is typically used for RSVP agent configurations or Cisco Unified Border Element media flow-through configurations.
B. The codec and packetization of both call legs must be identical.
C. DSP resources are required.
D. This Media Termination Point type does not require any DSP resources on the Cisco router.
E. It can provide G.711 mu-law to G.711 a-law conversion and vice versa.
Answer: DE
NEW QUESTION 3
An engineer has hundreds of H.323 gateways with thousands of route patterns in a Cisco Unified Communications Manager cluster. The engineer has noticed may specific route patterns created to the H.323 gateways. Which digit manipulation method on route patterns is most effective in reducing the number of route patterns?
A. regular expressions
B. discard digits
C. prefix digits
D. called-party transform mask
Answer: A
NEW QUESTION 4
Which two CLI commands allow you to verify the correct VolP dial-peer matching? (Choose two.)
A. debug voip dialpeer inout
B. show dialplan number
C. debug dialpeer match
D. debug ccsip messages
E. debug voip ccapi service
Answer: AB
NEW QUESTION 5
How does Cisco Unified Cisco Unified Communications Manager perform digit analysis?
A. Perform a digit-by-digit analysis to find the best matching route pattern within the partition list in the calling search space of a device.
B. Use a set of route lists and filters to match all collected digits of a dialed number.
C. Perform a digit-by-digit analysis to find the best matching route pattern based on a devices partition.
D. Send all collected digits through the Dialed Number Analyzer to determine the best call routing match within Cisco Unified CM.
Answer: A
NEW QUESTION 6
When a user dials a telephone number from a Type A SIP phone. How are the digits analyzed by Cisco Unified Communications Manager if no SIP dial rules are configured?
A. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager en bloc.
B. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager digit-by-digit.
C. With a Type A SIP phonacce the digits are only sent en bloc.
D. If there are ncso dial rules present and the user uses the Dial softkey the digits are sent to the Cisco Unified Communications Manager digit-by-digit.
Answer: A
M123
October 15th, 2018
any one have the valid dumps please !!!!!!!!!!!!!!!!!!!!!!
kaz
October 15th, 2018
Greetings.
I bought 300-085 CAPPS 124q dumps last week for $150. I and several others have passed this exam last week with these dumps, they are 100% valid, confirmed this saturday. I’m charging $30 to recover some of the money, hurry up cause you never know when the exams get updated.
My email is traindoublea(at)outlook(dot)com for more info.
M123
October 16th, 2018
@ Nimu is a SPAM
please not send the useless messages
M123
October 16th, 2018
hello all
Any one have the dumps passleader 246Q Please
my email: mh1475896(at)gmail(dot)com
M123
October 17th, 2018
any one passed the exam 300-085 ?????????
kaz
October 17th, 2018
I have, I used spoto dump. In the post above I share my email, I can send to you 3 sample questions.
M123
October 18th, 2018
@ kaz you passed this exam ?
please can you send in my email: mh1475896(at)gmail(dot)com
pd
October 18th, 2018
Yes, I passed, same dump as Kaz, 100% valid. Every question in the exam was in the dump, word for word.
M123
October 18th, 2018
@ pd ,
can you send me please this dumps in my email: mh1475896(at)gmail(dot)com
Please !!!!!!!!!!
kaz
October 18th, 2018
@ M123 we paid for that dump. Don’t expect to receive it for free. See my post above from oct 15th. It has my email address.
Salah
October 19th, 2018
@ciscowifi we not found any dumps for this link
Fritzie Coronel
October 22nd, 2018
Hi! All!!
Anyone kindly share the latest PassLeader 300-080/300-085 dumps with VCE or PDF files???
I need the newest PassLeader 300-080/300-085 dumps for my second try.
Thanks in advance!!!
M123
October 23rd, 2018
any one have passed the dumps?
Rudy
October 23rd, 2018
100% Valid Dumps ! For $25 each. I will sell to group of 4 users ($100)
Pool or solo buy, Hurry Up!! dumps valid 100% as of today!! 10/23/2018
M123
October 23rd, 2018
@ Rudy my email: mh1475896(at)gmail(dot)com
kaz
October 23rd, 2018
Greetings,
Spoto 124q is still 100% valid. A person I sold the dump to, took the test today.
I’m selling for $30, nothing is for free at the CCNP level. I can provide proof of purchase, and give 3 sample questions via email. My email is traindoublea(at)outlook(dot)com
My advise is to take the test ASAP while this dump is valid.
sirRob
October 25th, 2018
Hi there! Anybody got valid dump? Can you share somewhere on cloud?
kaz
October 25th, 2018
@sirRob
I have. I also got confirmation from a person today oct 25th that spoto 124q is still 100% valid. I’m charging 30 USD for them.
Wolfgang Zaloudek
October 29th, 2018
Anyone passed recently???
Wolfgang Zaloudek
October 29th, 2018
Anyone passed the 300-085 exam recently???
Wolfgang Zaloudek
October 29th, 2018
Anyone passed the 300-085 exam recently???
Please kindly share valid 300-085 dumps.
Wolfgang Zaloudek
October 29th, 2018
Anyone passed the 300-085 exam recently???
Please kindly share valid 300-085 dumps.
Thanks in advance!!!
salah
October 29th, 2018
Hello all
any one have passed the exam ???
chak
October 30th, 2018
hey,
can someone share 300-085 dump?
my mail is schichri93 at gmail.com
Rudy
October 30th, 2018
100% Valid dumps as of 10/29 Monday.
124Q selling it for $25, Hurry before exam change !!!!
salah
November 1st, 2018
hello ,
any one have passed the dumps ?
mk
November 2nd, 2018
guys any update
Andy
November 3rd, 2018
Passed exam on 25 th October ,used 124Q spoto and that was valid 100%.
Salah
November 3rd, 2018
@ Andy Can you share the dumps here
Toby
November 5th, 2018
Hi All ,
Anyupdate for dump ?
salah
November 5th, 2018
hello all any update for the exam ???
salah
November 5th, 2018
a little activity in this forum please !
Sy
November 6th, 2018
I will post the update tomorrow after taking my exam.
kindo
November 6th, 2018
to anyone who is planning to take the exam with 124q, be aware that it is 70% valid!
Pd
November 7th, 2018
If it’s the spoto 300-085 124 dump I can guarantee its 100%.
Pd
November 7th, 2018
Unless it’s changed in the last two weeks since I did it.
salah
November 7th, 2018
@kindo you have passed the exam this week ?
salah
November 7th, 2018
@Pd you have passed the exam this week ?
salah
November 7th, 2018
@ Sy please if you are passed the exam let me know , the update , i have the exam this week
i hope you will pass the exam very well
barut
November 7th, 2018
Passed today with 880 (margin is 860 on 60 questions)
124Q is a good start but not enough on its own.
First, it has some wrong answers, be careful.
Questions which I recall having on the exam but not on the 124Q dump.
1. Integration between VCS and TMS fails, what are the two reasons:
my asn: time mismatch and snmp disabled on VCS;
2. What protocol is used by Jabber for chatting in deskphone control mode?
my ans: xmpp (be careful there is a very similar question in 124q but definitely not the same);
3. What options do all the users have (explicitly stated that not only the main user) in a TMS conf (chose two):
my ans: disconnect /do not remember the 2nd one I chose/
4. Which TMSPE component is mandatory?
a. CUCM b. Active Directory c. VCS d. /do not remember/
5. What is needed to integrate successfully LDAP and Cisco Unity Connection?
Salah
November 7th, 2018
@congratulation. if you based only with dumps 124 q it is enought ?
Salah
November 7th, 2018
@barut how many new questions is not in the dumps 124Q?
barut
November 7th, 2018
124Q (purely) without knowledge on the technology will not be enough to pass. Good 10 questions were different on the exam. Be careful.
Salah
November 7th, 2018
@barut thank you for your informations
Sy
November 7th, 2018
I just cleared the exam today with 896! I agree with barut. There are many questions in the actual exam that were not in the spoto 124 dumps but you can pass the exam if you have good foundation on Collaboration environment and applying them on day to day work. Don’t just rely on the dump as it gives wrong answers so be careful.
Sy
November 7th, 2018
Here are some question appeared in the exam –
1. Why adding VCS on TMS is failing? Choose two.
My answer is:
– SNMP is not enabled on VCS
– Port UDP 161 was blocked on the firewall
Basically, SNMP should be enabled on the device so the TMS can manage it and of cource make sure port 161 UPD is open this port is used by VCS to be able to reached by TMS using SNMP.
Salah
November 7th, 2018
@Sy congratulation for passing the exam .
You remember another new question please
I would pass the exam this week
Please !!!
M123
November 7th, 2018
@barut
Congratulation can you give the dumps for 300-080 and 300-085 in my email:
mh1475896(at)gmail(dot)com
Please !!!!!
Sy
November 7th, 2018
Many questions regarding TMS appeared in the exam. Here is some:
How an endpoint is managed by Cisco TMS?
Answer – Provisioning the endpoint using Cisco TMSPE does not add the endpoint itself to Cisco TMS
You have to familiarize the functions of TMS and the TMS admin guide will help you conquer those question.
Also, there is one question i remember regarding provisioning. It is asking what is needed to minimum requirement to make provisioning work. Choose two.
My ans:
– Enable device provisioning on VCS
– TMS Movi License
Other choices are garbage.
This is an odd question but if you are familiar with legacy Movi (Mobile Video later on Jabber) using TMS-VCS, to make provisioning work you need to have the Movi licenses installed on TMS and also a install device provisioning key for VCS.
Again, dumps are helpful but you need to understand the technology and have a foundation on it. Dumps are not a good foundation in getting certification.
Sy
November 7th, 2018
Although the dump is not reliable to pass the exam, i will still share it for the benefit of everybody. The dump was updated with the correct answers but again it is not enough to pass the exam. Read more about TMS and VCS and understand the technology – sure you will pass the exam!
@Sy Thanks a lot for your informations and your help !!!
salah
November 8th, 2018
hello all
anyone have another’s new questions ?
kindo
November 8th, 2018
I agree with sy and barut. I was able to pass because of my hands-on experience otherwise it was not going to be if i only rely on the dumps so be double careful !!!
Salah
November 8th, 2018
@ kindo have passed the exam this week ?
kindo
November 8th, 2018
yes Salah
Salah
November 10th, 2018
Any one have the update
mk
November 11th, 2018
@Salah where are u from
Salah
November 11th, 2018
@mk Egyptian why?
mk
November 11th, 2018
@Salah im Egyptian too
can we contact to share
salah
November 12th, 2018
@ mk thank you my brother ,
can you take may email: mh1475896(at)gmail(dot)com
salah
November 12th, 2018
@ Umer Jilani congratulation!
can you share the new updates questions here please !!!
Feb
November 12th, 2018
@Umer, congrats!
Could you share that dump with me?
email: febcollab(at)gmail(dot)com
mk
November 13th, 2018
@salah i sent messege for you
salah
November 14th, 2018
hell all
any one have the update Please !!!!!!!!!
Shanas
November 15th, 2018
I cleared CAPPS with 911/860 yesterday. I used PL 246.
I do have to say that you need to know the technology and how it works, I also read the book twice and double checked the answered by researching and the book.
I will put a document together correcting the questions that are wrong on both files that I have have.
salah
November 16th, 2018
@ Shanas Congratulation , i am very hapy for you !!!
we count on you to send us the new questions
Thanks in advance
salah
November 16th, 2018
@ Shanas , my email : mh1475896(at)gmail(dot)com
Feb
November 16th, 2018
@ Shanas, congrats!
Could you share that dump with us?
email: febcollab(at)gmail(dot)com
Voice of Reason
November 17th, 2018
Shanas…
I have extensive CUCM experience but very little with video. Is the PL246 enough to pass without having much video experience?
Salah
November 18th, 2018
UPDATED QUESTIONS please not send the spam here !
ggbg
November 19th, 2018
Guys, GO FOR IT!!!
The 124 questions dump is strongly reliable. I got 926 today with 4-5 new questions on TMS, 2-3 on Unity and 1 on Jabber.
Here is what I recall:
1. What are supported image formats for Jabber contact photo?
– JPG; PNG; BMP
2. In cisco jabber, which protocol provides chat functionality when the deskphone is managed by the jabber?
– XMPP
3. What is single management console for third-party telepresence devices in TMS?
– Infrastructure management
*4. Something regarding endpoint management with TMS-PE.
– Possible answers were: adding device in TMSPE automatically adds in to TMS; adding device in TMSPE does not automatically add in to TMS; something for devices registered in CUCM – I DON”T KNOW THE ANSWER HERE
5. Using TMS during ONGOING conference what you can change on individual participants (and not the main participant) from the Conference Control Center?
– Set Mic Off; Send message
*6. Something on Unity templates types
– I answered User Template and Notification template
*7. What is required for LDAP integration with Cisco Unity Connection?
– Activate DirSync; Perform Full Sync
I am not sure for the questions with *, the rest are correct.
Good Luck all and don’t waste time.
Salah
November 20th, 2018
@ggbg congratulations ! !! Many thanks for your help
Shanas.
November 20th, 2018
The ans. for the Provisioning device to TMS.
As. Provisioning a device to TMS, does not actually add the device to TMS.
shanas
November 20th, 2018
@voiceof Reason.
Yes, is enough. but do research/confirm the questions
Voice of Reason
November 20th, 2018
shanas…. thanks…are you still going to publish a document for questions with correct answers?
salah
November 21st, 2018
hello any one have the correct answers for the updates questions please !!!
cisco
November 22nd, 2018
Hi Guys I made this group in FB for us. Cisco Certified Comunity please join.
face*book*.*com*/*groups*/*299708354207740/
Just remove the * symbol
Salah
November 23rd, 2018
Any update
salah
November 23rd, 2018
any one have passed the exam ???????
Greg
November 23rd, 2018
Don’t waste your time waiting for updates here! And don’t depend on others exam result it will not help you gain confident on the exam. Just study and practice on actual devices and thats will help you gain more confident and pass the exam! Cisco randomly change questions on their exam database.
hello all, any one have the dumps 300-085 with 246 q ??
Please !!!!!!!!!!
Pamir G, Ridgap, Don D,
could you please share the dumps with me as well?
jubert dot thegeek at gmail dot com
junjun911,
could you please share the dumps with me as well?
jubert dot thegeek at gmail dot com
NEW QUESTION 1
How many TelePresence MCU conference bridges can be configured in one conference bridge pool in a TelePresence Conductor cluster?
A. 12
B. 24
C. 30
D. 36
Answer: C
NEW QUESTION 2
Which two are characteristics of a Cisco Unified Communications Manager software based Media Termination Point? (Choose two.)
A. This Media Termination Point type is typically used for RSVP agent configurations or Cisco Unified Border Element media flow-through configurations.
B. The codec and packetization of both call legs must be identical.
C. DSP resources are required.
D. This Media Termination Point type does not require any DSP resources on the Cisco router.
E. It can provide G.711 mu-law to G.711 a-law conversion and vice versa.
Answer: DE
NEW QUESTION 3
An engineer has hundreds of H.323 gateways with thousands of route patterns in a Cisco Unified Communications Manager cluster. The engineer has noticed may specific route patterns created to the H.323 gateways. Which digit manipulation method on route patterns is most effective in reducing the number of route patterns?
A. regular expressions
B. discard digits
C. prefix digits
D. called-party transform mask
Answer: A
NEW QUESTION 4
Which two CLI commands allow you to verify the correct VolP dial-peer matching? (Choose two.)
A. debug voip dialpeer inout
B. show dialplan number
C. debug dialpeer match
D. debug ccsip messages
E. debug voip ccapi service
Answer: AB
NEW QUESTION 5
How does Cisco Unified Cisco Unified Communications Manager perform digit analysis?
A. Perform a digit-by-digit analysis to find the best matching route pattern within the partition list in the calling search space of a device.
B. Use a set of route lists and filters to match all collected digits of a dialed number.
C. Perform a digit-by-digit analysis to find the best matching route pattern based on a devices partition.
D. Send all collected digits through the Dialed Number Analyzer to determine the best call routing match within Cisco Unified CM.
Answer: A
NEW QUESTION 6
When a user dials a telephone number from a Type A SIP phone. How are the digits analyzed by Cisco Unified Communications Manager if no SIP dial rules are configured?
A. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager en bloc.
B. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager digit-by-digit.
C. With a Type A SIP phone the digits are only sent en bloc.
D. If there are no dial rules present and the user uses the Dial softkey the digits are sent to the Cisco Unified Communications Manager digit-by-digit.
Answer: A
NEW QUESTION 7
Which two options are available when configuring a POTS dial peer? (Choose two.)
A. preference
B. voice-class codec
C. VAD
D. answer-address
E. codec
Answer: AD
Dump spoto is valid , i passd today
Kreemo was this test the Spoto 300-085 dump?
Hi Kreemo, can you please share your dumps? florence dot matalis at gmail dot com. Thank you!
@@ Kreemo can give me the dumps spoto please !!!!!!
my email: mh1475896(at)gmail(dot)com
Hello all ,
I need the valid dumps 300-085 and 300-080 , can you give me please !!!!!
email: mh1475896(at)gmail(dot)com
urgent plaese !!!!!!!!!!!!
Hello junjun911!
Could you send dumps 300-080, please ?
artem.1.00 (at) list (dot) ru
kreemo83(at)hotmail(dot)com
Hi junjun911,
can you please send dump for 300-080?
Email: kamerainputbg(at)gmail(dot)com
Thank you very much!
Hello William Vinopal!
Could you send dumps 300-080, please ?
artem.1.00 (at) list (dot) ru
Hi William,
could you please share the dumps? aleksi at musician dot org
Thanks
@@ William Vinopal could you send me the valid dumps in my email: mh1475896(at)gmail(dot)com
thanks in advance
can you please send dump for 300-080?
Email: kamerainputbg(at)gmail(dot)com
Thank you very much!
NEW QUESTION 2
Which two are characteristics of a Cisco Unified Communications Manager software based Media Termination Point? (Choose two.)
A. This Media Termination Point type is typically used for RSVP agent configurations or Cisco Unified Border Element media flow-through configurations.
B. The codec and packetization of both call legs must be identical.
C. DSP resources are required.
D. This Media Termination Point type does not require any DSP resources on the Cisco router.
E. It can provide G.711 mu-law to G.711 a-law conversion and vice versa.
Answer: DE
NEW QUESTION 3
An engineer has hundreds of H.323 gateways with thousands of route patterns in a Cisco Unified Communications Manager cluster. The engineer has noticed may specific route patterns created to the H.323 gateways. Which digit manipulation method on route patterns is most effective in reducing the number of route patterns?
A. regular expressions
B. discard digits
C. prefix digits
D. called-party transform mask
Answer: A
NEW QUESTION 4
Which two CLI commands allow you to verify the correct VolP dial-peer matching? (Choose two.)
A. debug voip dialpeer inout
B. show dialplan number
C. debug dialpeer match
D. debug ccsip messages
E. debug voip ccapi service
Answer: AB
NEW QUESTION 5
How does Cisco Unified Cisco Unified Communications Manager perform digit analysis?
A. Perform a digit-by-digit analysis to find the best matching route pattern within the partition list in the calling search space of a device.
B. Use a set of route lists and filters to match all collected digits of a dialed number.
C. Perform a digit-by-digit analysis to find the best matching route pattern based on a devices partition.
D. Send all collected digits through the Dialed Number Analyzer to determine the best call routing match within Cisco Unified CM.
Answer: A
NEW QUESTION 6
When a user dials a telephone number from a Type A SIP phone. How are the digits analyzed by Cisco Unified Communications Manager if no SIP dial rules are configured?
A. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager en bloc.
B. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager digit-by-digit.
C. With a Type A SIP phone the digits are only sent en bloc.
D. If there are no dial rules present and the user uses the Dial softkey the digits are sent to the Cisco Unified Communications Manager digit-by-digit.
Answer: A
@ Anonymous can you send me the dumps in my email:
mh1475896(at)gmail(dot)com
NEW QUESTION 2
Which two are characteristics of a Cisco Unified Communications Manager software based Media Termination Point? (Choose two.)
A. This Media Termination Point type is typically used for RSVP agent configurations or Cisco Unified Border Element media flow-through configurations.
B. The codec and packetization of both call legs must be identical.
C. DSP resources are required.
D. This Media Termination Point type does not require any DSP resources on the Cisco router.
E. It can provide G.711 mu-law to G.711 a-law conversion and vice versa.
Answer: DE
NEW QUESTION 3
An engineer has hundreds of H.323 gateways with thousands of route patterns in a Cisco Unified Communications Manager cluster. The engineer has noticed may specific route patterns created to the H.323 gateways. Which digit manipulation method on route patterns is most effective in reducing the number of route patterns?
A. regular expressions
B. discard digits
C. prefix digits
D. called-party transform mask
Answer: A
NEW QUESTION 4
Which two CLI commands allow you to verify the correct VolP dial-peer matching? (Choose two.)
A. debug voip dialpeer inout
B. show dialplan number
C. debug dialpeer match
D. debug ccsip messages
E. debug voip ccapi service
Answer: AB
NEW QUESTION 5
How does Cisco Unified Cisco Unified Communications Manager perform digit analysis?
A. Perform a digit-by-digit analysis to find the best matching route pattern within the partition list in the calling search space of a device.
B. Use a set of route lists and filters to match all collected digits of a dialed number.
C. Perform a digit-by-digit analysis to find the best matching route pattern based on a devices partition.
D. Send all collected digits through the Dialed Number Analyzer to determine the best call routing match within Cisco Unified CM.
Answer: A
NEW QUESTION 6
When a user dials a telephone number from a Type A SIP phone. How are the digits analyzed by Cisco Unified Communications Manager if no SIP dial rules are configured?
A. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager en bloc.
B. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager digit-by-digit.
C. With a Type A SIP phonacce the digits are only sent en bloc.
D. If there are ncso dial rules present and the user uses the Dial softkey the digits are sent to the Cisco Unified Communications Manager digit-by-digit.
Answer: A
any one have the valid dumps please !!!!!!!!!!!!!!!!!!!!!!
Greetings.
I bought 300-085 CAPPS 124q dumps last week for $150. I and several others have passed this exam last week with these dumps, they are 100% valid, confirmed this saturday. I’m charging $30 to recover some of the money, hurry up cause you never know when the exams get updated.
My email is traindoublea(at)outlook(dot)com for more info.
@ Nimu is a SPAM
please not send the useless messages
hello all
Any one have the dumps passleader 246Q Please
my email: mh1475896(at)gmail(dot)com
any one passed the exam 300-085 ?????????
I have, I used spoto dump. In the post above I share my email, I can send to you 3 sample questions.
@ kaz you passed this exam ?
please can you send in my email: mh1475896(at)gmail(dot)com
Yes, I passed, same dump as Kaz, 100% valid. Every question in the exam was in the dump, word for word.
@ pd ,
can you send me please this dumps in my email: mh1475896(at)gmail(dot)com
Please !!!!!!!!!!
@ M123 we paid for that dump. Don’t expect to receive it for free. See my post above from oct 15th. It has my email address.
@ciscowifi we not found any dumps for this link
Hi! All!!
Anyone kindly share the latest PassLeader 300-080/300-085 dumps with VCE or PDF files???
I need the newest PassLeader 300-080/300-085 dumps for my second try.
Thanks in advance!!!
any one have passed the dumps?
100% Valid Dumps ! For $25 each. I will sell to group of 4 users ($100)
Pool or solo buy, Hurry Up!! dumps valid 100% as of today!! 10/23/2018
@ Rudy my email: mh1475896(at)gmail(dot)com
Greetings,
Spoto 124q is still 100% valid. A person I sold the dump to, took the test today.
I’m selling for $30, nothing is for free at the CCNP level. I can provide proof of purchase, and give 3 sample questions via email. My email is traindoublea(at)outlook(dot)com
My advise is to take the test ASAP while this dump is valid.
Hi there! Anybody got valid dump? Can you share somewhere on cloud?
@sirRob
I have. I also got confirmation from a person today oct 25th that spoto 124q is still 100% valid. I’m charging 30 USD for them.
Anyone passed recently???
Anyone passed the 300-085 exam recently???
Anyone passed the 300-085 exam recently???
Please kindly share valid 300-085 dumps.
Anyone passed the 300-085 exam recently???
Please kindly share valid 300-085 dumps.
Thanks in advance!!!
Hello all
any one have passed the exam ???
hey,
can someone share 300-085 dump?
my mail is schichri93 at gmail.com
100% Valid dumps as of 10/29 Monday.
124Q selling it for $25, Hurry before exam change !!!!
hello ,
any one have passed the dumps ?
guys any update
Passed exam on 25 th October ,used 124Q spoto and that was valid 100%.
@ Andy Can you share the dumps here
Hi All ,
Anyupdate for dump ?
hello all any update for the exam ???
a little activity in this forum please !
I will post the update tomorrow after taking my exam.
to anyone who is planning to take the exam with 124q, be aware that it is 70% valid!
If it’s the spoto 300-085 124 dump I can guarantee its 100%.
Unless it’s changed in the last two weeks since I did it.
@kindo you have passed the exam this week ?
@Pd you have passed the exam this week ?
@ Sy please if you are passed the exam let me know , the update , i have the exam this week
i hope you will pass the exam very well
Passed today with 880 (margin is 860 on 60 questions)
124Q is a good start but not enough on its own.
First, it has some wrong answers, be careful.
Questions which I recall having on the exam but not on the 124Q dump.
1. Integration between VCS and TMS fails, what are the two reasons:
my asn: time mismatch and snmp disabled on VCS;
2. What protocol is used by Jabber for chatting in deskphone control mode?
my ans: xmpp (be careful there is a very similar question in 124q but definitely not the same);
3. What options do all the users have (explicitly stated that not only the main user) in a TMS conf (chose two):
my ans: disconnect /do not remember the 2nd one I chose/
4. Which TMSPE component is mandatory?
a. CUCM b. Active Directory c. VCS d. /do not remember/
5. What is needed to integrate successfully LDAP and Cisco Unity Connection?
@congratulation. if you based only with dumps 124 q it is enought ?
@barut how many new questions is not in the dumps 124Q?
124Q (purely) without knowledge on the technology will not be enough to pass. Good 10 questions were different on the exam. Be careful.
@barut thank you for your informations
I just cleared the exam today with 896! I agree with barut. There are many questions in the actual exam that were not in the spoto 124 dumps but you can pass the exam if you have good foundation on Collaboration environment and applying them on day to day work. Don’t just rely on the dump as it gives wrong answers so be careful.
Here are some question appeared in the exam –
1. Why adding VCS on TMS is failing? Choose two.
My answer is:
– SNMP is not enabled on VCS
– Port UDP 161 was blocked on the firewall
Basically, SNMP should be enabled on the device so the TMS can manage it and of cource make sure port 161 UPD is open this port is used by VCS to be able to reached by TMS using SNMP.
@Sy congratulation for passing the exam .
You remember another new question please
I would pass the exam this week
Please !!!
@barut
Congratulation can you give the dumps for 300-080 and 300-085 in my email:
mh1475896(at)gmail(dot)com
Please !!!!!
Many questions regarding TMS appeared in the exam. Here is some:
How an endpoint is managed by Cisco TMS?
Answer – Provisioning the endpoint using Cisco TMSPE does not add the endpoint itself to Cisco TMS
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-14-5.pdf
Refer to page 55.
You have to familiarize the functions of TMS and the TMS admin guide will help you conquer those question.
Also, there is one question i remember regarding provisioning. It is asking what is needed to minimum requirement to make provisioning work. Choose two.
My ans:
– Enable device provisioning on VCS
– TMS Movi License
Other choices are garbage.
This is an odd question but if you are familiar with legacy Movi (Mobile Video later on Jabber) using TMS-VCS, to make provisioning work you need to have the Movi licenses installed on TMS and also a install device provisioning key for VCS.
Again, dumps are helpful but you need to understand the technology and have a foundation on it. Dumps are not a good foundation in getting certification.
Although the dump is not reliable to pass the exam, i will still share it for the benefit of everybody. The dump was updated with the correct answers but again it is not enough to pass the exam. Read more about TMS and VCS and understand the technology – sure you will pass the exam!
Download dump here:
https://we.tl/t-WQnOcRDrpf
@Sy Thanks a lot for your informations and your help !!!
hello all
anyone have another’s new questions ?
I agree with sy and barut. I was able to pass because of my hands-on experience otherwise it was not going to be if i only rely on the dumps so be double careful !!!
@ kindo have passed the exam this week ?
yes Salah
Any one have the update
@Salah where are u from
@mk Egyptian why?
@Salah im Egyptian too
can we contact to share
@ mk thank you my brother ,
can you take may email: mh1475896(at)gmail(dot)com
@ Umer Jilani congratulation!
can you share the new updates questions here please !!!
@Umer, congrats!
Could you share that dump with me?
email: febcollab(at)gmail(dot)com
@salah i sent messege for you
hell all
any one have the update Please !!!!!!!!!
I cleared CAPPS with 911/860 yesterday. I used PL 246.
I do have to say that you need to know the technology and how it works, I also read the book twice and double checked the answered by researching and the book.
I will put a document together correcting the questions that are wrong on both files that I have have.
@ Shanas Congratulation , i am very hapy for you !!!
we count on you to send us the new questions
Thanks in advance
@ Shanas , my email : mh1475896(at)gmail(dot)com
@ Shanas, congrats!
Could you share that dump with us?
email: febcollab(at)gmail(dot)com
Shanas…
I have extensive CUCM experience but very little with video. Is the PL246 enough to pass without having much video experience?
UPDATED QUESTIONS please not send the spam here !
Guys, GO FOR IT!!!
The 124 questions dump is strongly reliable. I got 926 today with 4-5 new questions on TMS, 2-3 on Unity and 1 on Jabber.
Here is what I recall:
1. What are supported image formats for Jabber contact photo?
– JPG; PNG; BMP
2. In cisco jabber, which protocol provides chat functionality when the deskphone is managed by the jabber?
– XMPP
3. What is single management console for third-party telepresence devices in TMS?
– Infrastructure management
*4. Something regarding endpoint management with TMS-PE.
– Possible answers were: adding device in TMSPE automatically adds in to TMS; adding device in TMSPE does not automatically add in to TMS; something for devices registered in CUCM – I DON”T KNOW THE ANSWER HERE
5. Using TMS during ONGOING conference what you can change on individual participants (and not the main participant) from the Conference Control Center?
– Set Mic Off; Send message
*6. Something on Unity templates types
– I answered User Template and Notification template
*7. What is required for LDAP integration with Cisco Unity Connection?
– Activate DirSync; Perform Full Sync
I am not sure for the questions with *, the rest are correct.
Good Luck all and don’t waste time.
@ggbg congratulations ! !! Many thanks for your help
The ans. for the Provisioning device to TMS.
As. Provisioning a device to TMS, does not actually add the device to TMS.
@voiceof Reason.
Yes, is enough. but do research/confirm the questions
shanas…. thanks…are you still going to publish a document for questions with correct answers?
hello any one have the correct answers for the updates questions please !!!
Hi Guys I made this group in FB for us. Cisco Certified Comunity please join.
face*book*.*com*/*groups*/*299708354207740/
Just remove the * symbol
Any update
any one have passed the exam ???????
Don’t waste your time waiting for updates here! And don’t depend on others exam result it will not help you gain confident on the exam. Just study and practice on actual devices and thats will help you gain more confident and pass the exam! Cisco randomly change questions on their exam database.
Did you have passed the exam ?