Share your CLCOR Experience

159q still valid(90%)

Anyone passed recently? Is there a valid dump?

fwe weeks back I passed, used the 249Q. Make sure to check each question, don’t blindly believe the answer that is given.

Hi everyone,
Passed today with 9xx
@ginopastino 249q dump is 90% valid, most of questions came from it.

@Poco
thx exam review
Are the answers to the 249q dump correct?

pass with 9XX

@ginopastino 249q dump is 90% valid, most of questions came from it.

maybe 3 q new
3 have different values

Passed today.. Passleader 249p dump is 90%, most question came from it

Hi Brothers,

I will tack the exam next week i am reading the Passleader 249p dump can any one advice I need support to prevent lose my certify.

Thank you

hi everyone

can anyone share the Passleade dumps?

https:// drive . google . com/file/d/1YNCo7DKqILaHPaeD0DGsy7AYqEBTrcRS/view?usp=sharing

@350-801 CLCOR
Thanks for the sharing dump file. Good look for the exam. Please share the experience after exam.

@ WAJ-CLCOR and any Frinds

pleas can share any additional DUMPs will be highly appreciated

Thank You

Hi everyone,
Passed today with 9xx.
249q dump is 98% valid, most of questions came from it.
The are only 3 new questions. I had 102 questions.

@Anyek
Congratulations!
Which dump you use?
passleader? lead4pass?

@all

Just passed the 350-801 exam today with 980 points!

PassLeader 350-801 dumps with 249q version are still valid enough for passing now, almost all questions are available in PL.

102 questions in total, only 2-3 new questions.

Taking it ASAP and good luck!

@ Kishore Bhowmik
Congrats, Please share the dumps file at here with link or email to us at
cefcompk at gmail dot com.
waiting your response. My exam is cumming up month.

A collaboration engineer must optimize the dial plan within Cisco UCM. There are multiple remote sites. And each site has its own route patterns and local gateways.
What should the engineer do on the cisco UCM to optimize the dial plan?

A. Configure a Standard Local Route Group to use a single route pattern for all calls within the cluster.
B. Create a centralized dial plan with a Cisco UCM Session Management Edition cluster or a Cisco gatekeeper.
C. Implement ILS with GDPR so the dial plan can dynamically replicate across clusters.
D. Leverage Cisco UCM Express as SRST so the phones can have more features of each remote site
What is the correct answer????

Where is urgent priority enabled to bypass the T302 timer?
A. route partition
B. CTI port
C. directory number
D. transformation pattern

What is the correct answer????

A. Configure Standard Local Route Group
C. Directory Number

@Collaborator
Thank you so much.

@Anyek
Can you remember 3 new questions ?

Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP. Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)
A.
Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.
B.
Add the audio forced command to voice service voip on the Unified Border Elements.
C.
Check the Retry Call as Audio on the SIP trunk
D.
Set Video bandwidth in the Region settings to 0.
E.
Change the Video Capabilities dropdown on the endpoint to Disabled.

above question …What is the correct answers ?

Endpoint A is attempting to call endpointB. Endpoint A only supports G.711ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for G.711ulaw. Which two media resources are allocated to normalize packetization rates through transrating? (Choose two.)
A. software transcoder on Cisco UCM
B. hardware transcoder on Cisco IOS Software
C. software MTP on Cisco IOS Software
D. software MTP on Cisco UCM
E. hardware MTP on Cisco IOS Software
What is the correct answers?

Dears,

can anyone share dump with me at mragheb2014 at gmail.com

@Waj-SCOR:
D. software MTP on Cisco UCM
E. hardware MTP on Cisco IOS Software

A link to the 249Q was posted Sept 14

@Shrisha, I need someone to give me an access

@Collaborator
Thank you so much.
@ all
Please share the dumps in vce format

Passed Today,

Hi all, A lot of questions have changed the 249Q Dumb like 60% due to my experience and reading the Book and INE training I passed. you should read very will

Thank you too much Voicetut web site :)…….. next another collaboration

@350-801 CLCOR
Congrats, have you any latest dumps others PL 249Q

@WAJ-SCOR

Hi Brother, unfortunately no as I mentioned I depend on my experience and reading the material

I am looking for CLICA 350-810 Official Cert Guide next step

Dears,
this is urgent, I want to go to exam in one week, will 249 QS of Passleader make me pass or there is a better dump??

249Q is enough but you’ll need to check all of the answers. The ones chosen on the dump are often wrong.

@350-801 CLCOR
@ALL
When a phone is registered over Mobile and Remote Access, where does it register?
A. Cisco Unified Presence Server
B. Expressway-E
C. Cisco Unified Communications Manager
D. Expressway-C
What is the Correct Answer?

@350-801 CLCOR
@ALL
When a new SIP phone is registered to Cisco Unified communications Manager, it keeps failing and showing an “unprovisioned” error message in the phone display. Which problem is a possible cause of this issue?
A.
Auto-registration is disabled on the Cisco Unified Communications Manager nodes and the phone
device does not have a DN configured.
B.
The DHCP settings are incorrectly and the phone does not have an alternate TFTP defined.
C.
The phone cannot download and install the latest firmware.
D.
The DN assigned to the phone is already in use by another SIP phone.
E.
The DN configuration for this phone is shared with SCCP phone, which is not supported.
What is the Correct Answer?

C. Cisco Unified Communications Manager

@Collaborator, Thank You so much for the valued feedback.

When a new SIP phone is registered to Cisco Unified communications Manager, it keeps failing and showing an “unprovisioned” error message in the phone display. Which problem is a possible cause of this issue?

A. Auto-registration is disabled on the Cisco Unified Communications Manager nodes and the phonedevice does not have a DN configured.
B. The DHCP settings are incorrectly and the phone does not have an alternate TFTP defined.
C. The phone cannot download and install the latest firmware.
D. The DN assigned to the phone is already in use by another SIP phone.
E. The DN configuration for this phone is shared with SCCP phone, which is not supported.
What is the correct answer?
Secondly Till us All answers in PL 249Q are correct ?

When a new SIP phone is registered to Cisco Unified communications Manager, it keeps failing and showing an “unprovisioned” error message in the phone display. Which problem is a possible cause of this issue?

A. Auto-registration is disabled on the Cisco Unified Communications Manager nodes and the
phone device does not have a DN configured.
B. The DHCP settings are incorrectly and the phone does not have an alternate TFTP defined.
C. The phone cannot download and install the latest firmware.
D. The DN assigned to the phone is already in use by another SIP phone.
E. The DN configuration for this phone is shared with SCCP phone, which is not supported.
What is the correct answer?

@ Collaborator, Thank you so much

@Have any new valid dumps my exam in the last week of this month. Pls share

Anyone else who took the exam can confirm that PL Q249 dump is not valid anymore ?

@Collaborator
All answers of PL 249 questions are correct. Please confirm. If you have khow about wrong answers can youit. It will very beneficial for me. Pls share PL 249 q wwith correct answers. My exam in last week of this month

Anyone with the latest passleader dump kindly? get in touch geraldmuli7 at gmail .com

A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority.

Which IOS entry sets the required priority?
A . dtmf-relay cisco-rtp
B . sip-notify dtmf-relay rtp-nte
C . dtmf-relay rtp-nte sip-notify
D . dtmf-relay sip-kmpl cisco-rtp
What is the correct answer?

An engineer must extend the corporate phone system to mobile users connecting through the internet with their own devices. One requirement is to keep this as simple as possible for end users.

Which infrastructure element achieves these goals?
A . Cisco Expressway-C and Expressway-E
B . Cisco Unified Instant messaging and presence
C . Cisco Unified Border Element
D . Cisco Express Mobility

What is the correct answer?

A customer wants a video conference with five Cisco TelePresence IX5000 Series systems. Which media resource is necessary in the design to fully utilize the immersive functions?
A. Cisco PVDM4-128
B. software conference bridge on Cisco Unified Communications Manager
C. Cisco Webex Meetings Server
D. Cisco Meeting Server
What is the correct answer?

B . sip-notify dtmf-relay rtp-nte
A . Cisco Expressway-C and Expressway-E
D. Cisco Meeting Server

correction should be C . dtmf-relay rtp-nte sip-notify

Sorry copied wrong line and just noticed it.

Did anyone take the exam these days?

@Collaborator
Thank you so much for the valued feedback. Can you send me an email of PL 249Q PDF or Doc file with corrected answers. I have download and reading this file for exam, which was shared above [350-801 CLCOR September 14th, 2021] link. It will be very beneficial for all next exam takers. Please download, check all questions and their answers. Thank you again.

@Collaborator
My email address cefcompk at gmail dot com.

You’ll need to correct your own dump files. I have my own studies and don’t have time to edit a 249Q paper.

@ Collaborator
Ok. Thank you.

An Engineer must configure a SIP route pattern using domain routing with destination +13135551212. The domain ciscocm1.jupiter.com resolves to 192.168.1.3. How must the IPV4 pattern be configured?
A) {email not allowed}.1.3
B) ciscocm1.jupiter.com
C) 192.168.1.3
D) \{email not allowed}.1.3

I feel the answer is A, What do u guys think?

I took my test yesterday (Oct 8th) and it was difficult since my background is on other products such as avaya, nortel and alcatel. The one from the dump mentioned above counted about only 30% of the questions and I had to rely on my skills and logics. And amazingly I passed although I think my score was just above the passing mark.

Congrats Paiyong, Do you remember the kind of questions that were asked which is not part of 249PL dump? did you get lots of like translation/ dialpeers type of troubleshooting questions?

An Engineer must configure a SIP route pattern using domain routing with destination +13135551212. The domain ciscocm1.jupiter.com resolves to 192.168.1.3. How must the IPV4 pattern be configured?
A) +13135551212 at 192.168.1.3
B) ciscocm1.jupiter.com
C) 192.168.1.3
D) \+13135551212 at 192.168.1.3

I feel the answer is A, What do u guys think?

Any one have latest valid dumps. Please share the link.

@Polyoung, congrats, if have any latest dumps can you share with us at email. cefcompk at gmail dot com.

@ Paiyong, congrats, if have any latest dumps can you share with us at email. cefcompk at gmail dot com.

Hey Beetee , the answer to ur question Oct8 is ciscocm1 dot jupiter dot com since the question states that the ip address is already resovable.

Can anyone else post if they attended the exam? Looks like PL 249 Q is no longer valid.

A network administrator deleted a user from the LDAP directory of a company. The end user shows as
Inactive LDAP Synchronized User in Cisco Unified Communications Manager. Which step is next to remove
this user from Cisco Unified Communications Manager?
A. Delete the user directly from Cisco Unified Communications Manager
B. Restart the Dirsync service after the user is deleted from LDAP directory.
C. Execute a manual sync to refresh the local database and delete the end user.
D. Wait 24 hours for the garbage collector to remove the user.
What is the correct answer?

I think D , Garbage collector happens at 3.15am everyday
If u want to delete from CUCM immediately then u may need to restart dirsync after deletion from LDAP. I hv done this in a production env.

@Hadlee . Thank you.

Hi, passed yesterday

It is True, Passleader 249p dump is 60%, a lot of new questions about CUC. Two were about SNMP. Two were about firewall ports in MRA.
Good Luck for everybody.

@ML
congrats, if have any other then PL249Q latest dumps can you share with us at email. cefcompk at gmail dot com.

If you have .VCE file of PL249Q please send it to may email address.

@ ALL
Need Latest dumps

Hello , This forum has become so silent.. Is there anyone else who has completed the exam? Can you please share your experience.?

Have any valid dumps in vce. Please share the link.

Which two DNS records must be created to configure Service Discovery for on-premises Jabber? (Choose
two.)
A. _cisco-uds._tls.cisco.com pointing to the IP address of Cisco Unified Communications Manager
B. _cuplogin._tcp.cisco.com pointing to a record of IM&P
C. _cuplogin._tls.cisco com pointing to the IP address of IM&P
D. _cisco-uds._tcp.cisco com painting to a record of Cisco Unified CM
E. _xmpp._tls.cisco.com pointing to a record of IM&P
What is the correct answer?

Which configuration on Cisco Unified Communications Manager is required for SIP MWI to work?
A. The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.
B. The line partition must be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.
C. Set the “Enable message waiting indicator” on the port group.
D. Assign a MWI extension on the mailbox.
What is the correct Anwer?

@HELP
I think the first one is B and D
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide_chapter_010.html

Second one should be B

@HELP
First one I think it is B and D See below link
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide_chapter_010.html

Second one think it is A

First one I think it is B and D See below link
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide_chapter_010.html

Second one think it is A

B. _cuplogin._tcp.cisco.com pointing to a record of IM&P
D. _cisco-uds._tcp.cisco com painting to a record of Cisco Unified CM

B. The line partition must be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.

First one I think it is B and D See below link
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide_chapter_010.html

Second one I think it is A
The line partition must be inside the inbound CSS assigned to the CUC Trunk

I really missed this community, I left Cisco for 2 years worked with another dumb technology that made me regret it, the good thing all my cisco certs still valid, I am still studying the materials for 350-801 and I will get back here as soon as im done, let’s keep sharing experience and provide feedback guys… keep it up I love you all.

@ Collaborator,
Thanks.

On which Cisco Unified Communications Manager nodes can the TFTP service be enabled?
A. any node
B. any two nodes
C. only nodes that have Cisco Unified CM service enabled
D. any subscriber nodes

What is the correct answer?

A. any node

which dumps are you using?

the 249Q is available from the Sept 14 post.

@Toto, Thanks for the Anwer.
PL 249Q pdf file.

@Help , Reg your Oct 18th question regarding MWI , I think the answer should be A,
The line partition must be inside the inbound CSS, it is little tricky though coz in the Inbound SIP trunks config in CUCM u get to choose inbound CSS and also Rerouting CSS.

wonder what others think?

Took the exam on 19th October, the 249q still valid. 85-90%

Has anyone else took the exam recently? is still PL 249q 70%-80% valid?

Hi, does anyone have a link to download the official study guide in pdf for CLCOR 350-801?

Does anyone planning to take exam this week? Please share your experience with us 🙂

mega dot nz slash /file/gSpyATzC#gFtZiND1FJnAiF76F83eze7THFvqUPm5X8wZFOztYo0

350-801 OCG @mojo

@Collaborator Got it. Thanks.

All I need is passing a 300-8XX test for getting my CCNP-COLLABORATION certification done. The question is which is the easiest test to take.

Any one planning to take the examen this week?

@NeedAdvice – 350-801 is the easiest as it has the most questions available. All of the other tests have pretty think dumps. Just my opinion.

do you think chinesedumps is valid? the actual price is very high 300 dls…

@zoma – save your dollars and use the 249Q that others are using to pass the test. Link to dump is in the September 14 commnets.

@collaborator. Do you know if 249q is maybe 80% of the exam?

Seems that there is a few packs of questions on exam. Because some guys who passed it recently said that PL249 is 80-90% valid, and others that only 50-60%. So I think its randomly changing.

@Toto, yes it seems, that’s the reason why i haven’t taken the exam right now. Toto, when will you take the exam??