Share your CLCOR Experience

@Z0ma – the 249Q should be more than enough to pass. Heck, I passed 6 months ago and all I had was a measly 137Q.

@Collaborator. Ok thanks, although what @Toto says makes me a little nervous…anyway i’m reading the OCG

Any one take 350-801 recently ? I will take it this Saturday . There is any new questions came ?

am also planning to do on Saturday !!
All the Best Robert, We can both share our experience after.

Great ! What you are studying for now ? I am reviewing 249Q. Just got it yesterday from this link September 14 commnets.. This exam is for my re-certification only .

Robert, Hadlee.

Please share with us your experiencie after taking the exam.

Good luck!

Hi All, I have passed the exam 25th of Oct. I just prepare only Pl249Q. In my exam only 50% questions were from pl249q. And remaining 50% out from this dumps. I also study the different topics from book and Google and due to that I will cover it with the help of may dear Allah and prayers of all my friends and family members. So I will suggest all of you will wait more time till release new PL dumps with new questions. If you have some experience and study all book and pl249q then you will pass the exam easily. Best of luck all new exam takers. Again thank to my dear Allah. Recertfied successfully.

Like WAJ commented , I am using PL249Q just get the feel of the exam , but I am researching about each question on the internet. Patrick Kinane , Kevin Wallace and Jeremy Ciaora videos are good .I am also going through the Official Cisco Press Book.

That was from me. forgot to put the name

Thanks sharing !
I did finished to ready Jason Bell’s book once , start to review PL249Q in order to feel exams, I go over those questions and verify the answers online and my Lab.
Only one days left, hopefully I can PASS !

Which DTMF relay methodconfigured on a SIP dial-peer will ensure that a media resource is not invoked by cucm for calls to UCCX IVRs?
A : dtmf-relay sip-kpml
B : dtmf-relay rtp-nte
C : dtmf-relay h245-signal
D : dtmf-relay sip-notify

The answer as per dump is B
But after researching Can it be any of the OOB realys like KPML ?
What do u guys think?

Looks like the UCCX will accept OOB relay methods, so it should be either KPML or sip-notify

Per Cisco documentation.
Below is a configuration snippet of two dial peers created to negotiate SIP KPML and SIP NOTIFY with the CUCM.
Dial Peer Facing CUCM:
dialpeer voice 10
voip dtmf-relay sip-kpml sip-notify

Dial Peer Facing ITSP:
dialpeer voice 11
voip dtmf-relay rtp-nte

I agree with you, so Answer B is not correct, since it is facing ISTP.

Guys I just scraped through and have passed. Please do not rely only on PL249Q , I think I got about 40-50% only from PL249 and the rest were from many sources. There was new QOS , IOS XE , new DTMf configs and a new SNMP drag and Drop. Either wait for new Version of PL or study and research more before attempting.
Good Luck guys.

This Pass Saturday I cleared my 350-801. a lot of new questions came , which are not in PL249Q, only part of in PL249Q, don’t reply on PL249Q, you have to study 350-801 materials from Cisco website, I passed which reply on learning training resources in Cisco website , plus hands on experiences in work production.

@ Hadlee,
Congrats.

Hi I finally cleared my 350-801. a lot of new questions came , which are not in PL249Q, only part of in PL249Q, you have to study 350-801 materials from Cisco website, plus hands on experiences .

@Robert,
Congrats.

Hi, anybody have .vce files for 350-801?
mail (delete spaces): kar im ster (at) inb ox(.)lv

Does anybody have chapters 23 through 32 of CLCOR 350-801 Official Certification Guide ? Where can I find them ?

Hi, since they say there are new questions, can someone please give us some new questions or a new dump?

hi Vincent please send me an email I have an idea for us who are looking for dumps: a o r x a n at gmail dot com

Hi. I am taking 350-801 exam in two days. Other than the PL249Q PDF, are there any other dumps that I should check out?

How reliable do you think the PL249Q PDF is? Is it enough to pass?

Question 136 looks to be misleading

What is the correct statement about CUCM and Cisco IM&P backups?

A. Backups should the scheduled during hours to avoid system performance issues.

I think this should be changed to ‘during OFF PEAK hours’

Hi, I have passed with 953 since 30 minutes

ALL questions I faced came from dumps that I referred of Dedier

Pass today. new questions are approx 2, I used Dedier dump, all the questions are the same as on the dump
I had new drag an drop, many questions about how to configure devices.
Good luck everyone

Passed yesterday, about 35 new questions. SNMP drag and drop (traps, informs, get, set). one about MOH with diagram included. 3 about expressway (not share nat in several firewalls). 3 about IOS GW (isdn, error code 1, qsig). question about CUC tollf fraud with digits “???”. 2 about Inter cluster lookup service…

Dedier dumps are fake, sick of these fake vendors.

Hello!

PL 249Q version is the old version.

I just found that PL has published the new version with 289Q.

Anybody who can kindly share PL new version with 289Q???

Thanks!

Anyone can share dump valid LPCore ? {email not allowed}

replace 4 -> alphabet A

lord arayend at gmail dot com

Hi folks

Can anyone please share PL new 289 questions dumps?

blinyoloekangu at gmail dot com

Gracias Dedier, passed as well since 1 hour, the questions were the same as your exam bank question

I am very happy to share that I passed my exam with a score of 903. I used the same dump shared by Dedier.

Where in Cisco UCM are codec negotiations configured for endpoints?
A. in Enterprise parameters
B. under device profiles in device settings
C. under regions using preference lists
D. in in-service parameters

I have a doubt between C and D but I think the C is right. What do you think?

@Vincent – C is the correct answer. IN CUCM you go to the system menu-region information-audio codec preference list. Verified on CUCM 12.5.1

Hi everyone, has anyone recently taken the exam and can you tell us something about the questions?

Thanks Dedier, passed too using the same version of dump

Can anyone share the new dump, please?

A collaboration engineer configures Cisco UCM to act as a DHCP server. What must be done next to configure the DHCP server?

A. Restart the TFTP service under Cisco Unified Serviceability
B. Add a DHCP subnet to the DHCP server under Cisco UCM Administration
C. Restart the Cisco DHCP Monitor Service under Cisco Unified Serviceability.
D. Add the new DHCP server to the primary DNS server

I think the B is right. What do you think?

@Vincent
That is correct, B is the right answer.
After configuring the DHCP within the CUCM, the next step is to go to System > DHCP > DHCP subnet and add it there.

@Amir thank you!!!
Refer to the exhibit. An administrator configures a secure SIP trunk on Cisco UCM. Which value is needed in the Secure Certificate Subject or Subject Alternate Name field to accomplish this task?
A. the fully qualified domain name of the remote device that is configured on the SIP trunk
B. the common name of the Cisco UCM CallManager certificate
C. the common name of the remote device certificates
D. the fully qualified domain name of all Cisco UCM nodes that run the CallManager service

I think the C is right. What do you think?

Does anybody have chapters 23 through 32 of CLCOR 350-801 Official Certification Guide ? Where can I find them ? Or if I can buy the book ?

A customer wants a video conference with five Cisco TelePresence IX5000 series system. Which media resource is necessary in the design to fully utilize the immersive functions?

A. Software conference bridge on Cisco Unified Communications Manager
B. Cisco PVDM4-128
C. Cisco Webex meetings server
D. Cisco meeting server

In PassLeader Dumb saying the answer is D, but I think is A, any advise?

@sarah
The correct answer is D. Check the IX5000 compatability table here:
https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/ix5000-series/datasheet-c78-733257.html

@Sarah the answer is D. Cisco Meeting Server because the question ask to “fully utilize”, the option A. Software CFB on CUCM is correct also but the option D very correct than A

Hey all,
I passed the exam with 902/1000.
Feels so good to get it done, this was my first attempt and I did it from home using the online proctoring system.

I used Dedier materials, almost all the questions are the same ones i encoutered in the exam.

I felt that the online proctoring system was very smooth and stress free, I had concerns that it might be a pain to deal with but I had absolutely no issues. About 5 minutes after I completed all the system tests and submitted the photos of my room I was granted access to the exam environment.

hi im asking about dump Dedier it is just 128 Q

Hi, I wrote my exam and passed. I have a 277q dump that I can share if someone wants to host it.

Dedier is SCAM… STOP!!

Chill bro!! Lots of Dedier scammers bro. Anyhow, if someone got a way to host the file…I will share 277q from killerdumps which is about 90% to 95% valid.

@Mojo can you share the 277Q i am taking my exam soon….thanks

@Mojo can you share the file at neilalvin0904 @ gmail dot com? thanks..

@Mojo Could you please share 277Q file at ba47493f @ opayq dot com? Thank you very much

Hey Everyone,

I successfully passed the exam this morning. I used Dedier dumps, CBT Nuggets, OCG, Udemey, and flashcards.

The questions on the exam are from Dedier materials

Let me know if you have any questions!

277q exam emailed @TakingSoon and @Recertificator. Do review the answers provided in the dump but overall about 95% of the questions are in this dump.

Good luck!!

@Mojo got it thank you very much

@Mojo ould you please share with me? stanleyjabson @ gmail dot com

@mojo, please email current dumps to {email not allowed} . Have to pass test by year end to re-up other certs. Been studying other dumps that others are saying are no longer valid.

@Mojo GetCiscoCert @ Mail dot com

@ Madison. All questions were on Dedier Dumps? Other sites are saying not valid.

@TakingSoon and @Recertificator. Can one of you please forward to GetCiscoCert @ Mail dot com

@Mojo please share with me the valid dump mehdi.jernane @ gmail dot com

Hi, could anybody share 277q dumps?
mail (delete spaces): kar im ster (at) inb ox(.)lv

@Mojo please share valid dump a n o r e v t v @ gmail dot com Thank you

@Mojo

I am looking at taking exam next week. Could I request the valid dumps.

cooksound84 at gmail dot com

277q exam emailed to @Vlatrosk, @Malek, @Theren, @Keker, @Mehdi_GW, @CetCiscoCert and @stan. Do review the answers provided in the dump as mentioned before but overall about 95% of the questions are in this dump. Also. can someone host the files with a shareable link for the community.

Good luck!!

Can someone please share Dedier dumps with me please
cicdmygoal AT Gmail dot c o m

Hi Mojo
Please share the 277q with me at didierak2 AT Gmail dot c o m ?
I have an exam soon

Failed the exam today, PassLeader 289 dumps are not valid, a lot of new questions, new drag and drop, happy new year ya’ll.

@Steve can you share the PL289 dumps?

Failed exam today. Several new questions, 277q from Mojo is now old. Happy New Year Everyone

Kindly share the 277q and the 289 questions at abelmothusi76 at gmail dot com

Hello all
I passed today my exam with a good mark (980/1000)
All the questions and drag & drop were from this dump.
qr.net/WFQtde
You can rely to this dump to pass the exam with a good mark.
Good luck on the exam
Regards,

Hi everyone,
Passed since 30 minutes with excellente score 9X% in all topics, and i want to share with you my experience. Exam was easy but take time to read the questions.
Almost all the questions i found on the exam were on the dump shared by Tiphanie.
Happy new year to everyone with the best wishes, and good luck in your exam.
Thanks, regards,

@Mojo can you send the 277q blaine . farntil888 @ protonmail. com (no spaces)

Dear Mojo can you please send the 277q to sickgsxrkid @ yahoo. com (no spaces)

@Mojo please share 277q to dd75td94 @ gmail .com

Hey all,
I passed my exam with a good mark (980/1000)
All the questions and drag & drop were from this dump.
forms.gle/EMZdNxAc6Y4AiRGi6
You can rely to this dump to pass the exam with a good mark.
Good luck on the exam
Regards,

Hi Cisco Community,
I just passed the exam but still waiting to get certified (awaiting for email confirmation).
Dump used : Tiphanie dumps, 100% of the questions are there as well as drag and drops. for the courses, i used : Chris Bryant’s Udemy video course.
The exam was easy with the practice tests.
Next Juniper and fortinet exams,
Regards,

@Mojo please share 277q to blinyoloekangu@ gmail .com

@mojo please share to beekay8717 @ gmail .com

Hi,

Mojo 277q dump sended to @Thomasino @Abel @BlainePonders @sickgsxrkid @anonymous
@Blaco @Kay

Please someone share new 289q dump in ba47493f at opayq dot com

I passed 2 days before with 96% There was few new qz

cut 0f zss
okpi.tzssk

please share zubair.kics @ gmail . com

Good day
Who has Kevin Wallace ccnp collaboration. So we can share I have CCIE collaboration v3 by INE

Kinds regards

Please note that the above are training videos

Hi everybody,

@Mojo can you please share 277q dump? alfonsocav1982@ gmail .com

please help for this question.

Which action is required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?
A. The traversal zone on Expressway-C points to Expressway-E through the peer address field on the traversal zone, which specifies the Expressway-E server address. For dual NIC deployments, set the Expressway-E address using an FQDN that resolves the IP address of the internal interface
B. The internal firewall must allow these inbound and outbound connections between Expressway-C and Expressway-E. SIP: HTTPS (tunnelled overSSH between C and E): TCP 2222; TCP 7001; Traversal Media: UDP 2776 to 2777 (or 36000 to 36011 for large VM/appliance): XMPP: TCP 7400.
C. The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: TCP 8443: XMPP: TCP 5222; Media: UDP 36002 to 59999.
D. Do not use a shared address for Expressway-E and Expressway-C, as the firewall cannot distinguish between them If static NAT for IP addressing on Expressway-E is used, ensure that any NAT operation on Expressway-C does not resolve the same traffic IP address Shared NAT is not supported.

For my point of view, all statements are correct except B

@mojo could you please share 277q dumps to sette072012 @ gmail.com. Thanks

Hello Mojo. If it is possible, please share the latest dumps at koukouroukou gmail com. Thanks a lot.

Sorry correct mail koukouroukou5656 gmail com. Thanks a lot.

@mojo could you please share 277q dumps to yurich.i inbox ru. Thanks

passed 2 days before with 96% There were 3 new qs,

eerase a9a
mupk.ta9ak

I passed the exam today too since few minutes, all the questions were the same ones i revised in Tiphanie dump, i highly recommand it, happy to share with you that.

I got VCE/PDF 280Q anyone interested for $10?

@Jonathan

can you please share Tiphanie dump? my address is alfonsocav1982 at gmail . com

Thanks

@mojo

Can you please share 277q dumps with alfonsocav1982 at gmail . com ?

Thanks