Share your ICOMM Experience

@Luka Modric
A user with only theStandard CCM Admin Usersrole can access Cisco Unified Communications Manager
Administration but cannot make any changes. A user with only theStandard CCMADMIN Administration
role can make changes, but cannot authenticate entry to Cisco Unified Communications Manager
Administration.
A user, therefore, must have theStandard CCM Admin Usersrole to access Cisco Unified Communications
Manager Administration and must have at least one other role to administer the system.

I think A

or C

@Voicehelp,

Thanks and I think the answer of the Question 189 is C (The add user capability has been disabled for the role).
According the Question 114, I thuink the answer is B (user B headset). It´s shown in all CICD dumps.

@Luka Modric
have you booked your exam?

@Voicehelp

As I told maria. I´m still saving money in order to book the CICD.

Hi All, Anyone took 210-065 recently? Need to check if this dumps from Chule is still valid?

https://www.dropbox.com/sh/ravnkud0sn9ttqu/AADGaPEvbzXgjgZzqcAjM-EXa?dl=0&lst=

Thanks for your response.

@ CCNAVoice
Yes passed on 19-Sep. Dump still valid but there are new questions.refer page 72-74

@Jiz, thank you. Appreciate your response. I’ll check 72-74..

Just asking again so i don’t get lost in the scammers..

does anyone have the valid 210-60 VCE files, i have the PDF from January ( is there a better one)

Hi friends, I need t know the right answer for:

QUESTION 130: An engineer is adding user accounts to Cisco Unity Connection and needs to limit the maximum length of messages. Which aspect defines this limit when adding new accounts?

A. user templates
B. user partitions and search spaces
C. user CoS
D. user mailbox store
E. user roles

@Luka Modric
C is correct by definition

CoS in CUC (not to be confused with Layer 2 quality of service [QoS] mark- ing or CUCM class of control) is a simple and powerful method of assigning and restricting user privilege. The CoS defines greeting and message length timers, licensed feature access, advanced feature access, alternate extension definition, private DL number, membership limits, and call transfer abilities.

but in CUC under user template ->Edit message setting it is possibile set the timer in seconds , A is correct too

But the question says the word “aspect” , i think C is the best answ

About this question
@ALL
A Cisco IP phone fails to register with the Cisco CallManager. Which choice should be checked first to isolate the issue?
A. Cisco Discovery Protocol is enabled on the switch.
*B. The phone generates dhcp request packets.
C. The phone generates TFTP request packets.
D. Delete and re-create the phone.

I think A is better

@Voicehelp,

The right answer is the B option (The phone generates dhcp request packets).

Hello all, I can confirm that the chule dumps are close the exam there are a few new questions that will throw you off. Here is the link to his dump I wish I had this dump before I took the test.

https://www.dropbox.com/sh/ravnkud0sn9ttqu/AADGaPEvbzXgjgZzqcAjM-EXa?dl=0&lst=

Notice when you try and run the VCE you will get an error retrieving key decrypt file: Im not sure how to fix this. If anyone does please add comments.

@Fire. Hi, around how many new questions were there in the exam?

@Voicehelp
@Luka Modric

I believe the right answer is A (CDP is enabled)
Before the phone sends a DHCP packet, it will receive the Voice VLAN info through CDP.

The phone boot up process is:
1. Switch detects unpowered device, supplies power
2. Phone boot software image
3. Switch provides VLAN info through CDP
4. Phone send DHCP request
5. Phone contacts TFTP server for config file (cnf.xml)
6. Contact CUCM server that is listed in the config file and registers.

@NewVoice
I agree

Hi friends,

Does everyone have the new CICD 210-060 questions in order to share?

Can someone be a kindest to share the lasted dumb 210-060. Thank you in advance!

The new 210-065 dumps (Sep/2018 Updated) now are available, here are part of 210-065 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 361
Which CLI command must the engineer run on the SX20 to verify its registration status?

A. xCommand
B. xStatus
C. xConfiguration
D. xEvent

Answer: B

NEW QUESTION 362
Which two UDP services are available on an MCU? (Choose two.)

A. FTP
B. HTTP
C. SNMP
D. encrypted SIP
E. H.323 gatekeeper

Answer: CE

NEW QUESTION 363
Which two actions does the pwrec command accomplish in a Cisco VCS appliance? (Choose two.)

A. changes SSH password
B. changes admin password
C. changes any user account password
D. changes root password
E. changes Telnet password

Answer: BD

NEW QUESTION 364
Which two Cisco TelePresence endpoints are considered immersive endpoints? (Choose two.)

A. C20
B. EX90
C. SX10
D. TX9000
E. IX5000

Answer: DE

NEW QUESTION 365
Which two features are present in the Cisco TelePresence TX9000 model? (Choose two.)

A. 1080p 60fps content-sharing stream
B. integrated CTMS
C. integrated document camera
D. six-participant seating
E. free-standing light reflector

Answer: DE

NEW QUESTION 366
An end user reports that when making B2B calls, the calls are connecting, however, no audio or video is being received by either party. Local calls work fine. Which two areas must be investigated? (Choose two.)

A. VCS traversal zone
B. endpoint traversal mode
C. far end camera control
D. firewall configurations
E. DNS configuration

Answer: BD

NEW QUESTION 367
Which component of the Cisco Digital Media Suite is responsible for transcoding and transrating?

A. Cisco DMD
B. Cisco TMS
C. Cisco MXE
D. Cisco DMM

Answer: C

NEW QUESTION 368
A conference has been scheduled two hours in advance. When does Cisco TelePresence Management Suite run diagnostics for system tickets that can affect the conference setup?

A. 15 minutes prior to the scheduled start time
B. 1 minute prior to the scheduled start time
C. 10 minutes prior to the scheduled start time
D. 5 minutes prior to the scheduled start time

Answer: A

NEW QUESTION 369
Which of the following is accurate regarding facial and shoulder lighting measurements in a TelePresence environment? (Choose the best answer.)

A. Facial lighting should be from 200 to 400 lux by using indirect lighting and with the endpoint off.
B. Room lighting should be from 200 to 400 lux by using direct lighting and with the endpoint on.
C. Facial lighting should be from 200 to 400 lux by using direct lighting and with the endpoint on.
D. Shoulder lighting should be from 200 to 400 lux by using indirect lighting and with the endpoint off.
E. Shoulder lighting should be from 200 to 400 lux by using direct lighting and with the endpoint on.
F. Room lighting should be from 200 to 400 lux by using indirect lighting and with the endpoint off.

Answer: A

NEW QUESTION 370
Which of the following statements is correct regarding wallpapers on a Cisco TelePresence SX20 Quick Set? (Choose the best answer.)

A. Only predefined wallpapers can be selected.
B. Wallpapers can be modified by selecting the Maintenance > Personalization menu option on the web interface.
C. Custom wallpapers must be 4 MB or smaller.
D. Predefined wallpapers can be deleted.
E. Custom wallpapers must use the .png file format.

Answer: C

NEW QUESTION 371
……

Get more NEW PassLeader 210-065 dumps here:

http://bit.ly/210-065-dumps-online

(390q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

@Ryan Korniloff

Thanks for updating the latest PassLeader 210-060/210-065 exam questions!!!

Please kindly share the full version PassLeader 210-060/210-065 dumps VCE or PDF.

Thanks

in

advance!!!

Thanks

in

advance!!!

@Ryan Korniloff

CICD 210-060

Are you sure the TCT is the right answer for the New Q256? Do you have the New Q271?
The web site you shared us, doesn´t show any new questions.

@Ryan Korniloff

CICD 210-060. I think some answers are wrong, for example:
New Q258
New Q259
New Q266

Check them please!

Hi friends, help please!

CICD 210-060

QUESTION 28: An SCCP IP phone places a call to a SIP phone that is registered to the same Cisco Unified Communications Manager Express. During the active call, call waiting indicates a second call is incoming to the handset, but the user decides to ignore it. In this scenario, what is the combined total number of signaling conversations and media flows that used the SCCP phone as an endpoint?

A. 2
B. 3
C. 4
D. 5
E. 6

I recently passed my 210-060 exam.

I mainly used labs to study but used the dumps from page 72 and https://www.prepaway.com/cisco/pass4sure.210-060.27010.ete.file.html (recommended on a few comments) my last few days of studying. I would say between 40% and 50% of the question were in the dumps.

From Ryan Korniloff comment, I remember seeing 255, 258, 260-1, and 264-7.

Whats the first protocol used to register a phone
cdp
dhcp
tftp
some other options

An engineer is adding user accounts to Cisco Unity Connection and needs to limit the maximum length of messages. Which aspect defines this limit when adding new accounts?

A. user templates
B. user partitions and search spaces
C. user CoS
D. user mailbox store
E. user roles

I would not recommend relying on just those dumps. If you’re able to, I suggest getting a demo version of Call Manager, IM & Presence, and Unity Connection. That way you can navigate the menus, as there were a few questions about where to navigate.

Hope this helps some of you out.

Well, time to start prepping for 65…

Help me out, which is it? Apperantly the Official Cert Guide say A

Which option recommends cascading?—-
A. Active Speaker
B. full participants
C. continuous presence
D. enhanced continuous presence

What is the outcome when you perform a factory reset on a Cisco VCS.

A. erase the running config
B. sets configuration to defaults
C. sets network configuration to defaults

just got out from testing center Chule 210-065 is still valid and couple of 1-5 new questions but manageable. good luck everyone!

Saw this question below as FTP and HTTP but when i looked it up i found the below.

Which two UDP services are available on an MCU? (Choose two.)
A. FTP
B. HTTP
C. SNMP—-
D. encrypted SIP
E. H.323 gatekeeper—

SIP (UDP)

Allow/reject incoming and outgoing calls to the MCU using SIP over UDP or change the port that is used for this service.

Disabling this option will prevent calls using SIP over UDP.

If a port is disabled, this option will be unavailable.

You must use the same port number for both Port A and Port B. The number is automatically refreshed for Port B. You cannot change the Port B UDP port numbers and they are always grayed-out; if you want to allow incoming and outgoing SIP (UDP) calls on Port B, ensure that you have the video firewall as an activated feature (refer to Upgrading the firmware) and you have checked the tickbox for SIP (UDP) on Port B.
SNMP

Enable/disable the receiving of the SNMP protocol on this port or change the port that is used for this service.

If a port is disabled, this option will be unavailable.

You must use the same port number for both Port A and Port B. The number is automatically refreshed for Port B. You cannot change the Port B UDP port numbers and they are always grayed-out; if you want to enable the receiving of the SNMP protocol on Port B, ensure that you have the video firewall as an activated feature (refer to Upgrading the firmware) and you have checked the tickbox for SNMP on Port B.

Note that by default SNMP Traps are sent to port UDP port 162 (on the destination network management station); this is configurable. For more information, refer to Configuring SNMP settings.
H.323 gatekeeper

Enable/disable access to the built-in H.323 gatekeeper or change the port that is used for the built-in H.323 gatekeeper.

If a port is disabled, this option will be unavailable.

You must use the same port number for both Port A and Port B. The number is automatically refreshed for Port B. You cannot change the Port B UDP port numbers and they are always grayed-out; if you want to open Port B for the H.323 gatekeeper, ensure that you have the video firewall as an activated feature (refer to Upgrading the firmware) and you have checked the tickbox for H.323 gatekeeper on Port B.

Hello everyone!

I will take the exam 210-065 next month and would like to confirm the answer because I saw in the dumps different answers:

An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which two steps are required as part of this process? (Choose two.)

A. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
B. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
C. Connect the Touch 8 controller to the secondary network adapter on the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
E. Hold the mute button down for 20 seconds while you power on the Touch 8 controller

answer is: BD or BE

======================================================================================================================

When you add third party call what button you should press?

A. TRANSFER
B. MERGE
C. CONFERENCE
D. SAWP

answer is: A or C

======================================================================================================================

Which three features are supported by the Cisco Video Surveillance Encoding Server? (Choosethree.)

A. IP and analog cameras
B. MPEG-2 and MPEG-4 encoding
C. archiving
D. motion detection
E. clustering
F. virtual matrix

answer is:: ABD or ACD

======================================================================================================================

Which option is the Cisco recommended layout if cascading is being used?

A. Enhanced Continuous Presence
B. Full Participant
C. Continuous Presence
D. Active Speaker

answer is:: C or D

Tks

@Godoy,

Have you tried to use me for answers. I know every question, just use me. My name is Google.com

This is a mutual help forum, if you are troubled and do not want to help then this is not your place

@Ryan Korniloff or anyone else

Think this is AE beause when you review the guide features for this model AE are under features whereas six participant seating is a part of the product overview. See link

https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-tx9000-series/data_sheet_c78-702104.html

NEW QUESTION 365
Which two features are present in the Cisco TelePresence TX9000 model? (Choose two.)

A. 1080p 60fps content-sharing stream
B. integrated CTMS
C. integrated document camera
D. six-participant seating
E. free-standing light reflector

Answer: DE

Can someone please share the latest 210-060. thank you in advance needhelp18000 @ gmail.com

@Dante
@Luka Modric

can you please share the latest dumb 210-060 needhelp18000 @ gmail . com? Thank you in advance!

Hi! All!!!

Finally PASSED 210-060 and 210-065 recently!!!

A LOT OF NEW QUESTIONS IN BOTH EXAMS!!!

I used the NEW version PassLeader 210-060 (287q~~~NEW VERSION DUMPS) and 210-065 (390q~~~NEW VERSION DUMPS) dumps, valid enough for passing now!

Good Luck!

P.S.

Part of PassLeader 210-060 dumps and 210-065 dumps are available here:

210-060 dumps:

http://bit.ly/210-060-dumps-online

(287q~~~NEW VERSION DUMPS)

210-065 dumps:

http://bit.ly/210-065-dumps-online

(390q~~~NEW VERSION DUMPS)

Good Luck!!!

Hi everyone, I tried many audio & video lectures for the preparation of 210-060 & 210-065 but all was in vain, then I found 210-060 & 210-065 exam PDF from braindumpscerts.com, by learning the PDF I passed my exam very easily. I had almost 90% same questions in my real exam which I prepared from the PDF. overall I had a great Experience! Highly recommended

Does some know when is gonna change the exam?

Hi Everyone, help please !

210-060 CICD.
QUESTION 189: A user in Cisco Unified Communications Manager Administration has been added to the Standard CCM Admin Users group, which includes the Standard CCMADMIN Administration role, but the user cannot add new users. What is the cause of this issue?

A. The add user capability has been disabled for the group
B. The incorrect group and role were assigned.
C. The add user capability has been disabled for the role.
D. Only the CCMAdmin user can add users.
E. Users can be added only via LDAP

@ALL
An end user wants to log in to extension mobility, what are the user prerequisites? (Choose two.)
*A. User ID
*B. Password
C. Extension number
D. PIN

I thin this is not correct , the correct choice in A e D

@Sharon which are the exact material/dumps u used? Thanks!!

@Voicehelp,

The Cisco information talks about “User password, UserID, and PIN” for Cisco Extension Mobility Users. So it´s necessary to choose the best answer.

Hi Everyone, help please !

QUESTION 258: Which two password options are recommended when setting up a voicemail box that multiple users will access? (Choose two.)

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

Hi All, What is the correct answer on this question from 210-065 Chule Dumps?

When you add third party call what button you should press?
A. TRANSFER
B. MERGE

QUESTION 173
How fast can Cisco Unified Communications Manager generate CDR and CMR files?
A. One CDR file and one CMR file every minute for up to 1 hour
B. One CDR file and one CMR file every second for up to 1 minute
*C. Ten CDR files and ten CMR files every hour for up to 1 day
D. Ten CDR files and ten CMR files every day for up to 1 week

I think this answ is not correct , the correct choice is A “Every Cisco Unified Communications Manager can generate one CDR file and one CMR file every minute for up to 1 hour. You can configure the maximum disk space that is used for storage of CDR files in the CDR Repository through provisioning.”

@Luka Modric
I think A and C

@Luka Modric
An end user wants to log in to extension mobility, what are the user prerequisites? (Choose two.)
*A. User ID
B. Password
C. Extension number
*D. PIN

All days i use EMobility….

@Voicehelp, thank you for your answer, but the Extension Mobility question is about end user (password) and not Cisco phone (PIN).

Help me with:

QUESTION 130: An engineer is adding user accounts to Cisco Unity Connection and needs to limit the maximum length of messages. Which aspect defines this limit when adding new accounts?

A. user templates
B. user partitions and search spaces
C. user CoS
D. user mailbox store
E. user roles

QUESTION 189: A user in Cisco Unified Communications Manager Administration has been added to the Standard CCM Admin Users group, which includes the Standard CCMADMIN Administration role, but the user cannot add new users. What is the cause of this issue?

A. The add user capability has been disabled for the group
B. The incorrect group and role were assigned.
C. The add user capability has been disabled for the role.
D. Only the CCMAdmin user can add users.
E. Users can be added only via LDAP

QUESTION 176
Jabber for iOS is which Device Name?
*A. CSF – Jabber for Desktop
B. TCT – Jabber for iPhone
C. TAB – Jabber for iPab
D. BOT – Jabber for Android

I think B TCT – Jabber for iPhone

@Luka Modric
“EM operates as an IP phone service, applying user-specific device profiles to the phone the user logs in to. Once the phones are subscribed to the Extension Mobility service, the user selects that service on the phone and enters his user ID and PIN when prompted (using the phone keypad in alphanumeric mode, similar to texting on an old cell phone).”

Role -> CUCM End User

Pag 290 – OCG

QUESTION 189 -> c is correct
QUESTION 130 -> c is correct ( but also Ais not totally wrong)

@Voicehelp, the EMobility question talks about prerequisites, please check again.

What´s the best answer for Q189 and Q130?

@Voicehelp, help me please 210-060 CICD

QUESTION 36: Which scenario allows user A in partition X to call user B in Cisco Unified Communications Manager?

A. User B in partition X is not assigned to any CSS.
B. User B in partition Y assigns both partitions to CSS-X.
C. User B is not assigned to any partition or CSS.
D. User B is assigned to partition Y and assigns to CSS-X.

@Voicehelp, for chule dumps are not working with my VCE player. Error is, error receiving key for decrypt file:

Do you or anyone have a fix for this issue?!

@Luka Modric
A partition is a grouping of things with similar reachability characteristics. In general, you can think of a partition as being assigned to things you can dial, such as the following:
■ DNs
■ Route patterns
■ Translation patterns
■ Voicemail ports
■ Meet-Me conference numbers

Calling Search Space
A calling search space is a top-down ordered list of partitions. A calling search space can be applied to a device (such as an IP phone or gateway) or to a line on the IP phone. One CSS exists by default, and by default, it contains only the null partition. You can think of a CSS as being assigned to things that can place calls.

If user A in partition X ( DN ) want call user B in other partition ( DN ) is needed a CSS that contain both partition . B is the correct answ

@voicehelp, thank you for the answer. I have another one.

QUESTION 28: An SCCP IP phone places a call to a SIP phone that is registered to the same Cisco Unified Communications Manager Express. During the active call, call waiting indicates a second call is incoming to the handset, but the user decides to ignore it. In this scenario, what is the combined total number of signaling conversations and media flows that used the SCCP phone as an endpoint?

A. 2
B. 3
C. 4
D. 5
E. 6

can someone please share working VCE player?

Passed today using it too
Thanks Latila

Just cleared the 210-065 exam with 9XX/1000

Materials Used:
Chule dumps (370Q + 64Q pdf)
New Questions in pages 72-74
New Questions in Passleader dumps posted in previous page by Ryan Korniloff.

There are few new 5-6 questions cannot be found in any dumps. Maybe new questions for October 2018.

Now I’m CCNA Collab 🙂

Good Luck guys!

@Luka Modric
I think 4

1.INVITE
2.Ringing
3.200 OK
4. ACK

A two-way RTP channel is established between Phone A and Phone B.

@Voicehelp,

You said, in the page 82, the signaling conversations and media flows total is 3 and not 4. Please check it once again.

@Luka
3 is what the dump says ….4 that’s what I say

@Voicehelp, thanks! There are two similar questions and I´d like you can help. Study them carefully.

Q45. Which two password options are there to set up voicemail?

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

Q46. Which two password options are recommended when setting up a voicemail box that multiple users will access? (Choose two).

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

Passed too using Maria dumps
980/1000

Passed 940 Valid dumps but new questions

@TOTTIGOL

Can you share the new questions?

Passed also by using the dumps posted above by Maria
Thanks God

Failed on my exam using dump posted by Maria.

I passed the exam by using the dumps posted by Maria above

All the questions were from these dumps

The vce test simulator is awesome

Good luck to everyone

Regards

@Ryan Korniloff September 28th, 2018

Fixing an issue that was posted by @Ryan on page 83

NEW QUESTION 370
Which of the following statements is correct regarding wallpapers on a Cisco TelePresence SX20 Quick Set? (Choose the best answer.)

A. Only predefined wallpapers can be selected.
B. Wallpapers can be modified by selecting the Maintenance > Personalization menu option on the web interface.
C. Custom wallpapers must be 4 MB or smaller.
D. Predefined wallpapers can be deleted.
E. Custom wallpapers must use the .png file format.

The correct answer is: E

Explanation
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/quick-set-sx20/tc7/administration-guide/sx20-quickset-administrator-guide-tc72.pdf

Navigate to: Configuration > Personalization
Supported file formats: BMP, GIF, JPEG, PNG
Maximum file size: 2 Mbyte
You cannot delete a predefined wallpaper.

@CCNAVoice

Are there any question about Telepresence Multipoint Switch, Telepresence conductor or MCU?

please share download link for CUC v8. I dont have Cisco acct.

Fixing an issue that was posted by @Ryan on page 83

NEW QUESTION 370
Which of the following statements is correct regarding wallpapers on a Cisco TelePresence SX20 Quick Set? (Choose the best answer.)

A. Only predefined wallpapers can be selected.
B. Wallpapers can be modified by selecting the Maintenance > Personalization menu option on the web interface.
C. Custom wallpapers must be 4 MB or smaller.
D. Predefined wallpapers can be deleted.
E. Custom wallpapers must use the .png file format.

The correct answer is: E

Explanation
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/quick-set-sx20/tc7/administration-guide/sx20-quickset-administrator-guide-tc72.pdf

Navigate to: Configuration > Personalization
Supported file formats: BMP, GIF, JPEG, PNG
Maximum file size: 2 Mbyte
You cannot delete a predefined wallpaper.

,,

NEW QUESTION 370
Which of the following statements is correct regarding wallpapers on a Cisco TelePresence SX20 Quick Set? (Choose the best answer.)

A. Only predefined wallpapers can be selected.
B. Wallpapers can be modified by selecting the Maintenance > Personalization menu option on the web interface.
C. Custom wallpapers must be 4 MB or smaller.
D. Predefined wallpapers can be deleted.
E. Custom wallpapers must use the .png file format.

The correct answer is: E

Explanation
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/quick-set-sx20/tc7/administration-guide/sx20-quickset-administrator-guide-tc72.pdf

Navigate to: Configuration > Personalization
Supported file formats: BMP, GIF, JPEG, PNG
Maximum file size: 2 Mbyte
You cannot delete a predefined wallpaper.

Q45. Which two password options are there to set up voicemail?

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

Q46. Which two password options are recommended when setting up a voicemail box that multiple users will access? (Choose two).

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator.,

I passed the examen today, I score 9XX/1000. The dumps of 250Q’s and other questions that are here, are enough for the test.

@Villa what exam ?

Hello
Anybody with a valid dump or information will be great
please no scammer or spammer
come on guys we always share info in this site

@Villa,

Could you share the new questions?

@Voicehelp, help me with some questions please

Q150. A manager is generating bill reports for a particular user. Which navigation sequence must be used for this task?

A. Bills > Department
B. User Reports > Bills > Department
C. Bills > Individual
D. User Reports > Bills > Individual

The Cisco document says: Perform one of the following tasks:
• If you are a user or manager, choose Bills > Individual.
• If you are a CAR administrator, choose User Reports > Bills > Individual.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/8_5_1/car/CAR/caruserb.pdf

Q151. An administrator must keep CDR data for a longer period of tin-E and wants to modify the configured value of the CDR/CMR Files Preservation Duration (Days).
Which menu options does the engineer navigate?

A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management

The Cisco document says: System > Enterprise Parameters. The CDR File Time Interval parameter specifies the time interval for collecting CDR data.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/11_0_1/admin/CUCM_BK_CF9AFC8E_00_cisco-unified-servicability-merge-1101/Tools_and_Reports.html#CUCM_TP_C7DF8E5B_00

Q152. A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?

A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile
D. In Cisco Unified Communications Manager, navigate to user Management > End User to confirm that the user has the correct voicemail profile
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct

Some people says D.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b08user.html

@Voicehelp
210-060

@Luka Modric
254. WHAT IS THE LIMIT OF CISCO UNIFIED COMMUNICATIONS MANAGER FOR IP PHONES LOCATED IN ONE STANDARD CLUSTER?
R// 40,000 TELEFONOS
255. IF THE LATENCY IS 250MS FOR VOICE (IP PHONE) HOW THE USER WILL BE EFFECTED?
R// DELAY AND INTERRUPTION
256. GENERAR REPORTE DEL CORREO DE VOZ EN CUCM
R// DEVICE REPORTS > VOICE MESSAGING > UTILIZATION
257. WHICH PROTOCOL IS USED TO ROBBED BYTES?
R// CAS
258. WHAT IS THE AMOUNT OF JITTER IN MILLISECONDS USED FOR VOICE?.
R// 30 MS
259. AÑADIR A CONFERENCIA Q BRIDGE EN CONFIGURACION DEL TELEFONO
R// MGRL
260. MIGRACION DE USUARIOS DE CUCM TO CUC QUE PLANTILLA USAR.
R// USER TEMPLATE
261. OPCIONES QUE ENVIA DHCP CUANDO EL TELEFONO SE CONECTA AL SW (3)
R// IP ADD, DEFAULT GATEWAY Y TFTP
262. ENCONTRAR LAS LLAMADAS CONCURRENTES Y CAIDAS.
R// SERVICEABILITY
263. MWI NO ENCIENDE CUANDO HAY UN MSJ. ISSUE
R// CHECK MWI FUNCTION IN CUC
264. ADVANTAGES OF USING QOS AND WHAT BENEFITS IT HAS
R// IMPROVING LOSS CHARACTERISTICS Y AVOIDING NETWORK CONGESTION, SUPPORTING DEDICATED BANDWITH
265. JABBER TORUBLESHOOT CONNECTION
R// JABBER ADVANCED SETTINGS
266. REPORTE DE CONGESTION.
R// TRAFFIC SUMMARY.
267. PROBLEMAS DE MWI
R// RESET MWI IN UNITY
268. HERRAMINETO PARA MONITOREAR EL ESTADO DEL PUERTO CUC
R// CONNECTION REMOTE PORT MONITOR Y RTMT PORT MONITOR
 
269. EN LA CONFIGURACION DEL TELEFONO OPCION PARA CONFERENCIA BRIDGE.
R// MEDIA RESOURCE GROUP
270. CAMBIO DE SECURITY PROFILE PARA EL TELEFONO EN CUCM.
R// REBUILD THE -XML FILE OF THE PHONE.
271. OPCIONES DE CONTRASEÑA A CONFIGURAR EN EL CORREO DE VOZ (2)
R// DOES NOT EXPIRE Y USER MOST CHANGE AT NEXT LOGIN
272. NETWORK ENGINEER MUST PERFORM A MANUAL BACKUP OF THE CISCO UNIFIED COMMUNICATIONS MANAGER SYSTEM. WHERE CAN THIS BACKUP BE DONE?.
R// DISASTER RECOVERY SYS
273. ELIMINAR EXTENSIONES NO ASIGNADAS DEL CUCM
R// ROUTE PLAN REPORT
274. AN ADMINISTRATOR IS SETTING UP A REMOTE SITE IN CISCO UNIFIED COMMUNICATIONS MANAGER THAT HAS A T1 WAN CONNECTION TO THE MAIN SITE. WHICH OPTION IS THE BEST VOIP CODEC FOR THIS TASK?
R// G729
275. ACCIONES EN BAT EN CUC (2)
R// CREATE Y DELETE
276. AN ENGINEER IS CREATING A NEW PHONE USING THE CALL MANAGER. WHICH OPTION IS PRESENTED FIRST WHEN Y OU CLICK THE ADD NEW BUTTON?
R// PHONE TYPE
277. A CUSTOMER HAS REQUESTED THAT ALL EMPLOYEES HAVE “STANDARD CTI ENABLED” AND “STANDARD CCM END USER” ROLES. HOW WOULD THESE BE ASSIGNED PRIOR TO BEING APPLIED TO THEIR ACCOUNTS?
R// ACCESS CONTROL GROUP
278. IP PHONE USER REPORT THAT THE MWI LIGHT DOES NOT WORK WHILE RECEIVING VM MSGS WHICH ACTION MST BE TAKEN TO TROUBLE SHOOT IN UNITY CONNECTION
R//RUN PORT ACTIVITY REPORT
279. NO SE PUEDE MOSTRAR EN CAR REPORT. (2)
R// ROUTE AND LINE GROUP Y THE TOP NUMBER OF USERS.
280. COMPONENTE DE CUCM MEDIA RESOURCE PARA ESTABLECER CONFERENCIA DE LLAMADAS
R// CALL CONTROL
281. COMPONENTE DE CUCM MEDIA RESOURCE PARA ESTABLECER TRANSCODING
R// MEDIA CONTROL
282. ¿IN WHICH THREE WAYS DOES QOS PROVIDE BETTER NETWORK SERVICE VOIP QUALITY? (CHOOSE THREE.)
R// MANAGES NETWORJ CONGESTION, IMPROVES LOSS CHARACTERISTICS Y SUPPORTS DEDICATED BANDWITH.
283. AN ENGINEER IS CONFIGURING CISCO JABBER FOR IOS. THE DEVICE NAME MUST START WITH WHICH OPTION?
R// TCT
284. WHICH TWO PASSWORD OPTIONS ARE RECOMMENDED WHEN SETTING UP A VOICEMAIL BOX THAT MULTIPLE USERS WILL ACCESS? (CHOOSE TWO.)
R// USER CANNOT CHANGE Y NO PASSWORD
285. WHAT IS THE UNIQUE IDENTIFIER THAT IS USED TO REGISTER AN IP PHONE ENDPOINT TO CUCM?
R// IP ADDRESS
286. AN ENGINEER IS ENSURING THAT EACH SIP-BASED ELEMENT WITHIN A NETWORK HAS A COMPONENT TO ROUTE CALL ACTIVITIES TO. WHICH VIRTUAL CISCO UCS SERVER COMPONENT IS EFFECTIVE IN REDUCING THE NUMBER OFCALL ROUTING COMBINATIONS WHILE ALSO SIMPLIFYING SIP NETWORK DESIGN AND TROUBLESHOOTING?
R// CISCO UNIFIED SIP PROXY
287. YOU CLICK ADMINISTRATOR’S LOGIN ACCOUNT IN THE CME GUI’S CONFIGURE SYSTEM PARAMETERS MENU. WHICH OF THE FOLLOWING ARE YOU MOST LIKELY CONFIGURING? (CHOOSE THE BEST ANSWER.)
R// A CUSTOMER ADMINISTRATOR
288. WHICH OF THE FOLLOWING STATEMENTS BEST DESCRIBES DIFFSERV? (CHOOSE THE BEST ANSWER.)
R// IT PRIORITIZES PACKETS BY TRAFFIC CLASS

@Luka Modric

285. WHAT IS THE UNIQUE IDENTIFIER THAT IS USED TO REGISTER AN IP PHONE ENDPOINT TO CUCM?
R// IP ADDRESS

I think that is wrong as the IP phones are actually identified in the system by that unique MAC address ,not but their IP

@Elidjon,

The question talks about “registering” and not adding. When you add an endpoint you need the MAC Address. So the IP Address is necessary to register in CUCM server.

Chule 64Q pdf enough to pass the exam?

@Villa THX

@Luka Modric

A manager is generating bill reports for a particular user. Which navigation sequence must be used for this task?
A. Bills > Department
B. User Reports > Bills > Department
C. Bill > Individual
*D. User Reports > Bills > Individual

Correct answ is D

explanation Chapeter 16 Pag – 429 / 430 / 431 OCG

Bills
■ Individual: Available to users, managers, and administrators. Provides call information
for a specifi ed date range in summary or detail format. Report can be viewed or
emailed.

@Luka Modric

Q151. An administrator must keep CDR data for a longer period of tin-E and wants to modify the configured value of the CDR/CMR Files Preservation Duration (Days).
Which menu options does the engineer navigate?

*A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management

The Cisco document says: System > Enterprise Parameters. The CDR File Time Interval parameter specifies the time interval for collecting CDR data

CDR File Time Interval: Required Field This parameter specifies the time interval for collecting CDR data. For example, if this value is set to 1, each file will contain 1 minute of CDR data (CDRs and CMRs, if enabled). The CDR database will not receive the data in each file until the interval has expired, so consider how quickly you want access to the CDR data when you decide what interval to set in this parameter. For example, setting this parameter to 60 means that each file will contain 60 minutes worth of data, but that data will not be available until the 60-minute period has elapsed and the records are written to the CDR database.
This is a required field.
Default: 1
Minimum: 1
Maximum: 1440
Unit: min

prepaway é confiavel ?

Is prepaway reliable for purchase?

@Voicehelp, confirm please !

Q152. A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?

A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile
D. In Cisco Unified Communications Manager, navigate to user Management > End User to confirm that the user has the correct voicemail profile
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct

Some people says D and other people C.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b08user.html

Q45. Which two password options are there to set up voicemail?

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

Q46. Which two password options are recommended when setting up a voicemail box that multiple users will access? (Choose two).

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

Q47. IP Phone user report that the MWI light does not work while receiving voicemail messages which action must be taken to troubleshoot in Unity Connection?

A. Run port activity report
B. Reset the phone
C. Reset MWI function in unity connection
D. Check user mailbox

Q48. MWI is not lighting when there is an incoming message. How to troubleshoot?

A. Restart phone
B. Mailbox is full.
C. Check MWI function in CUC

Q49. Troubleshooting MWI issue:
A. Reset MWI in Unity.

@ALL
About this
QUESTION 236
An IT administrator must allow a customer service department supervisor to change or modify a recorded
message on their phone system. Which role is needed to accomplish this?
A. Greeting Administrator
B. Recordings Administrator
C. Remote Administrator
D. Annunciator Administrator

Who can help me ?

@Voicehelp, remember confirm the last quesions.

Q236.
Answer A (Greeting Administrator).

Q21. Users are complaining about dropped calls, so a network engineer needs to troubleshoot Cisco Unified Communications Manager to view concurrent calls and calls. Where does the engineer generate such reports?

A. Cisco Unified Serviceability
B. Cisco Unified OS Administration
C. Cisco Unified Communications Manager Administration
D. Cisco Unified Real-Time Monitoring Tool

Some friends say D and other friends C.

hey Guys, I just took 210-065 today and passed!

I used Chule dumps along with other questions from this forum. There are also about 10 new questions in the exam that are not included in any dumps.

1) What storage element does TCS use to store recordings?

2) What’s the CLI command to configure an external and internal endpoint in VCS

3) What’s the CLI command in CUCM to unlock the admin account after 2 minutes?

4) What are things to avoid when setting a telepresecence room?
-avoid glossy objects
-plants and decorations

@Voicehelp, confirm please !

Q152. A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?

A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile
C. In Cisco Unified Comfemunications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile
D. In Cisco Unified Comsdcunications Manager, navigate to user Management > End User to confirm that the user has the correct voicemail profile
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct

Some people says D and other people C.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b08user.html

Q45. Which two password options are there to set up voicemail?

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

Q46. Which two password options are recommended when setting up a voicemail box that multiple users will access? (Choose two).

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

Q47. IP Phone user report that the MWI light does not work while receiving voicemail messages which action must be taken to troubleshoot in Unity Connection?

A. Run port activity report
B. Reset the phone
C. Reset MWI function in unity connection
D. Check user mailbox

Q48. MWI is not lighting when there is an incoming message. How to troubleshoot?

A. Restart phone
B. Mailbox is full.
C. Check MWI function in CUC

Q49. Troubleshooting MWI issue:
A. Reset MWI in Unity.

Q152. A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?

A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile
D. In Cisco Unified Communications Manager, navigate to user Management > End User to confirm that the user has the correct voicemail profile
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct

Correct is C , i verified on CUMC

@Luka Modric

Q152. A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?

A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile
D. In Cisco Unified Communications Manager, navigate to user Management > End User to confirm that the user has the correct voicemail profile
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct

Correct is C , i verified on CUM

@Luka modric

Q45. Which two password options are there to set up voicemail?

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

So how is the question asked …
A C D E are correct

@Luka Modric

Q46. Which two password options are recommended when setting up a voicemail box that multiple users will access? (Choose two).

A. User Cannot Change
B. No Password
C. Does Not Expire
D. User Must Change at Next Login
E. Locked By Administrator

A e C they are the two that make the most sense …

anybody has valid 210-065 dumps?
there are 390 Q dumps on the market but marketers show us nothing from last 20
just need to know if they are reliable