Share your CIPT1 v8.0 Experience

Could be a number of things:
1. Is the tftp service running on the server used as ftfp server
2. Are you using Auto-reg or you are manually configuring phones on your CUCM
3. You need to understand the boot process of the IP phone you are using (CDP, Voice vlan, DHCP, Option 150 / tftp server)
4. What error meesage you see on the phone screen? “Ethernet disconnected / Keeps rebooting” and findout what each symptom means..

Hope this helps

@MentalCase, ccnavoice… Thanx a lot…

Do u have any basic lab config. for home… by just using vmware, cucm, cipc ???
wan to practice for CIPT1.. w/o hands on lab.. its useless studying frm book or watching nuggets…

Finally Managed to make phones Ring’ssss!!!! 😀
using cisco ip communicator & X-lite softphone… cucm installed in vmware.. all in 1pc… n i think its sufficient for Cipt1… 🙂

Can anyone help me with CIPT1 V8.0 & CIPT 2 V8.0 Nuggets ?

Please also give me Labs if available.

This would be a graat help.

Regards
Ethen

@Ethen, I dont think Jeremy has even started working on the CCNP Voice series.

I’ve been to the CBT Nugget website a couple of times and nothing indicates that he is working on it. I would suggest watching v6.0 nuggets to see the screens and configurations pages. But use a v8.0 text book to prepare for an exam.

@ MentalCase,

Thanks for your reply.

Regards
Ethen

The CCNA Voice 2011 series CBTNuggets ll b out in sum dayzz.. Jeremy posted on his blog… But no idea abt CCNP-Voice… I think the Video mentor has completed d CCNP-Voice series n ll b available soon..

But the old series of CBTnuggets fr ccnp-voice(v6) is still vry helpfull.. as i cn’t see ny difference in cucm 7 n 8 configuration.. m having d ebook of CIPT1 v8.. n cucm 8 installed on vmware.. its very much helpful for hands-on-cucm.. 😛

Best luck!! ll soon give d xam.. very much excited!!!

@Lord~~

Can you please share the details including softwares to install CUCM 8 on VM WARE on Laptop.
Plase also share the procedures, it would be a great help.

Regards
Ethen

@Ethen

Follow the steps as given in d below link:

http://www.computerfreetips.com/Cisco-Call-Manager-CUCM/Cisco-CUCM8-install-vmware.html

Before gettin startd.. make sure ur PC is having.. min 2gb Ram.. 72gb free space in hard-disk.
n u shuld hv… Vmware workstaion/server.. or u can use oracal virtual box(its freeware)..
Gns3..n CUCM8 ios image.. torrent it!!
den u ll need CIPC(cisco ip communicator) version 7 wuld b better if u gt dat.. n one x-lite sip softphone(Thirdparty softphone).. both CIPC & X-lite should be auto-registered wit SIP.. (X-lite does nt support SCCP) for config. X-lite softphone follow d steps as in below link.. https://support.counterpath.com/default.asp?W91

hope dis ll help u.. fr any doubts u cn ask me freely~~ Enjoy!!

@Lord

Thanks for the valuable Information. I will start collecting these goodies and will contact u if required.

Regards
Ethen

@Lord

Its very useful information u provided. Can u kindly provide the CUCM 8 torrent file. I got tired on searching for it. And also CIPT v8 book link, it would be a great help. And how u r maintaining the pstn connections.

Regards
Khaleel

hi all..

i took the exam today and i passed with 848 score( who cares the score)…. my preparation materials are cipt1 foundation learning guide, and updated .vce dump…. got around 3-4 new questions but easy to answer…. since this exam is multiple choice type, i didn’t feel like interesting and challenging which i felt with routing and switching… i didnt follow the answers in the dump file and so i got less score, but at the end of the day who cares the score…. cisco needs to put some simulation type scenario for these exams which would attract the techie guys to opt for this exam….

for all regarding the question about the services need to be publisher… the answer is call manager, and tftp server… not the cisco dirsync…

Thank you all for your help and comments..

Congratzzz BRo!!! Which Dumps u had followed.? n hw many D&D ws der in xam.. culd u plss share with us..?

n regarding ur ans..(about the services need to be publisher)… Call manager & TFTP Server

I think its nt correct…
1) DirSync:
DirSync has to be activated on the publisher server because the publisher is the only server in the CUCM cluster with read/write capabilities and information is being inserted into the CUCM IDS database.( So, i think it should be activated on Publisher).

2) Cisco DHCP Monitor Service
Cisco DHCP Monitor Service monitors IP address changes for IP phones in the database tables. When a change is detected, it modifies the /etc./dhcpd.conf file and restarts the DHCPD daemon. ( Cisco recommends that DHCP Monitor Service should be activated on Publisher)

3) Call manager: It is not necessary(recommended by cisco ) that Publisher should be involved in call processing..(The basic function of call manager service is to process the call in ur system/organization) If there are more than 1000 Ip-Phones in ur organization… ( so, i think its not mandatory to activate call manager servic on publisher)

4)To avoid performance issues, Cisco recommends that you configure a dedicated TFTP server (separate from the Cisco CallManager server) if you have many phones and gateways in your network…

…..Cisco CallManager and Cisco TFTP services can run on the same server in small configurations only (for example, in a network with fewer than 2500 phones)….

from my opinion.. the answer should be Dirsync n DHCP Monitor Service

This above Info. i hv got from various Cisco books/forums/& also from some expert advice… 🙂

@CCNA Voice.. we wuld lyk to read ur overall xam experience.. so.. plss shar with us.. Thanx

Can anyone please tell me where I can find cucm8.6 iso download free…. Its urgent!

@LORD

you are stating based on theoretical experience, but I have experience with real time environment, where I did set up the call managers to my company from scratch…. if you would like to have some proof then i can attach the screenshot of my callmanager… i have cluster containing 5 servers i.e. 1 pub 4 subs…. i got less score since i messed up the drag and drop about the h232 voice class profile config… Dirsync is not necessary at all… and moreover you’re correct about tftp,but u can assign it later to an dedicated tftp server once you setup the cluster…..

my apologies for late response….

@Lord…

if you think that my answers are incorrect, then its okay no prob for me…you can go with your own answers buddy….i used updated dump which has 226 questions….

All, im going to go and sit the CIPT1 test in a few weeks. Does anyone know if there are labs in the test, or is it all just Q/A

Is dump with 226 is enough for pass the exam, and are there any wrong answers in this dump???

Arpit, where can I get that 226 question from to pass the exam? thanks in advance.

ccnp cadidate

any one pass the exam lately ???????

passed the exam this week with a 9xx. 226 and older CBT nuggets still valid. 5 new questions and a few of the 226 q’s reworded.

Hi all, I’m going to have the exam this month, I saw in 226q dump there are some questions about watermark or similar but I couldn’t find anything about that on the student guide, Is this watermark part of CIPT1 8.0?

@ ccna voice candidate…Here it is

http://www.examcollection.com/cisco/Cisco.ActualTest.642-447.v2011-10-17.226q.vce.file.html

hi,

can any one share dumps in pdf please….

thanks

Hi All,Can anyone comment on new questions and tricky questions. Have they just changed options or whole question has been changed somewhat???????

Hi guys … i am facing many problems with cucm 7 … sometime i can access it from my browser and sometime i cant … ip address is correct .. after trying many times then i can access i dont know it happens … is there any forum than has discussion about these issues so somebody can help me out in this thing …. regards

@ Ahmed Hilmy

Is your CUCM7 installed in VM ? how about the Hard disk size allocated?
I had this case at before as the VM HDD allocate size is too low(40GB in Split virtual disk into multiple files, I tried this mode can be passed installation steps without warning). It needs at least 72GB.

For my solution, I have created a new VM with 200GB for max disk size and it is working noramlly. Btw, if the cucm7 have this problem, you can see there are error messages after you logged on with root(who you created at installation progress) in the cucm Linux interface.

Hope my case can help you.

@ visitor …. thanks buddy for Ur comment really it is helpful … i allocated size 35 GB okay i will try to extend the hard disk … now can u guide in voice lab .. how can i connect CUCM 7 with CIPC ? or all of them together with GNS3 ? …. thanks

HI GUYS

ANY WHERE I CAN FIND CIPT 1 AND 2 v8 cisco presess or sybex ebooks

Thanks In advance

plz iam going for the exam
(cipt1) next week any help about the last dump and the new question

Got 883/1000 by the grace of God. 5 – 10 new questions.

http://www.examcollection.com/cisco/Cisco.ActualTests.642-447.v2011-07-14.by.Xenix.219q.vce.file.html

Good Luck

Nailed it. 883! Thanks again, Voice Tut. Used the latest files from Actual Tests.

Hi All,

im using P4S Q&A, there is a 3 questions (in the mixed q’s area), all relating to conference bridge. it relates to what media resources a phone may use if the MRGL is reset. im not sure f the answers in the test are correct.
Can anyone confirm.

Hi Friend’s
One has the new book Cisco Press CIPT1 642-437 in pdf ?

Tks!

Hi Friend’s

One has the new book Cisco Press CIPT1 642-447 in pdf ?

Tks!

Hi EBRAHIM RIYAZ ABDUL NAZIR,
CIPT1 pdf sent to your email id.

BR
Durai

Hi Duraibabu,

Good luck on your exam this weekend. Do let us know of the good news! I sent you an email request.

Thanks!

hi Duraibabu,

tanx 4 ur help bro..!!!

tanx…!!

hi Duraibabu,

tanx 4 ur help bro..!!!

tanx…!!

Hello Everyone:

I would need to set a CUCM VM lab. I have an XP machine with core2 duo, 4GB of RAM at 2.7 Ghz. I would like to know the following:

1. Is this machine suitable already to run GNS3 and VM ware to install CUCM 8.x?
2. How can I go through about it? i.e. installing GNS3 and VM?
3. where can I get an image of CUCM 8.x?

I could install these as long as I have the steps and procedure. I am not clear on how to go about it. Im just starting on my cert and dont have resources. Any help on this would be very much appreciated. I was excited to find this website and is optimistic I could find help within.

Thank you all so much.

In these 226 or 219 Question dumps lot of questions pertain to CIPT 2 I guess. Those are like for CAR etc. Does one need to worry about those 🙂 ?
Also is there some list of compile wrong/ suspected answers of the said two dumps ?
Will appreciate help ..

Is there any body who can advice which dump is valid 226 or 219 please update the form if somebody has recently passed the exam.

Xenix219Q in examcollection.com is valid

Thansk Duraibabu, i will pass first 642-457 it has less questions ; this paper i will go at last

Hi All, passed with 895, 1 hour before. Xenix219Q is enough to pass. 226Q has around 8 new questions in the last. If you have Designer, edit the 226Q vce and copy paste those last 8 questions to Xenix. I did the same way and scored 895 🙂

Hi friends,

Am planning to take CIPT1 642-447.. Please let me know whether 56q.vce is enough to clear it….

@ Iswar: 56Q!!! the exam has over 70 Qs. I guess u meant to say VCE with 226 Qs. But remember these VCEs are no replacement to studying book(s), Nuggets, or doing hands-on. Yes, these can help you pass the exam, but you MUST have the background knowledge.
I am taking the test in couple of day

Passed today, 92%, i used Pass4sure 240q’s.

Congrats… am scheduled for test after three hours

Update: Passed with 89x. Most of the Qs from the dumps. Some with new options and some totally new. All the best to the rest …
Me onto CIPT2 now… See u there

Xenix still valid. Used with the dump with226 questions as well. Got 860. New question about native presence. Another question about which are network features with new answers to choose.

gr8 going guys..
got v7 installed on vmware and ip phones talking, though the setup is fine to prepare for cipt1 but can somebody help me with the link of cucm 8.x plz ???

@Lord, u still around

Are there any labs for this exam guys? Or is it just a multiple-choice test with some DnDs?

INE CCNP Voice 8.0 Class – 2012

New elearning !!!!!!!!

http://wowebook.net/2012/02/ine-ccnp-voice-8-0-class-2012.html

Download :p
Good Luck

do any1 knw the link which have step by step to install cucm in computer??? plz do share

anyone has the new cipt2 quick reference ???

Hi all, what do you think, what is the correct answer for this question:
Managers have asked to be able to have an extension call them back if it is busy when they try to call it. In what two places can this feature be assigned to Managers phone?
a. device defaults
b. phone button template
c. firmware load information
d. default device profile configuration
e. device profile
f. softkey template

In the test it is stated that A and E is correct, BUT I would personally choose b and f, because it’s there where you can assign callback function to either one of the templates and after that apply them to the phone.

Mike,

I think B and F are places where you can create them. To assign them to the phones, you need A or E.
HTH

Anyone can explain the difference between ‘h225 timeout setup {value}’ and ‘h225 timeout tcp establish {value}’?

Earliest thanks

Passed today with 918, dumps still valid. Maybe 3-4 new questions.

One like ‘Which 3 of these are Enterprise Parameters’ a. CDR b. Dependency Records c. T302 Timers d. User search limit e. ? f. ?

and another about the function of Device Pool in CUCM.. Cant remember the others…

Brianm,

hi, congrats for pass the exam.. i have a q… witch dumps is valid?

greatings

кто сдал

Passed the exam today. Xenix is still valid. Thanks Xenix.
Additional questions I got for the exams which were not in Xenix’s dump are below, hope the below will help others and thanks to all those participating in voicetut.com – AHRAO

When Cisco Unified Communications Manager software is installed on a Cisco MCS server, which level of access does it provide for the customer to the operating system of the server?

A. CLI and GUI access.
B. CLI access only
C. GUI access only
D. no access.
E. access only through an interface controlled by Cisco TAC

Answer: A

What are the two benefits of using SIP dial rules on an IP phone? (Choose two)

A. The phone can initiate dialing without sending any signaling messages to Cisco Unified
Communications Manager.
B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages to Cisco Unified Communications Manager.
C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message to Cisco Unified Communications Manager.
D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remaining digits from the SIP phone to Cisco Unified Communications Manager one-by-one.
E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to send the remaining digits from the SIP.

Answer: B,D

To reach an external number, a user first dials a 9. Which route pattern will be matched if a user dials an international number 011442288223001 and terminates the interdigit timeout? 

A. 9.1[2-9]XX[2-9]XXXXXX
B. 9.18[0, 6-8][0, 6-8]XXXXXXX
C. 9.1900XXXXXXX
D. 9.011!
E. 9.011!#

Answer: E

Which two of these describe Meet-Me conferencing? (Choose two)

A. The conference originator of the conference acts as the controller of the conference and is the only participant who can add or remove other participants.
B. Any participant can add and remove other conference participants.
C. Anyone who has calling privileges to call the directory number while the conference is active can join the conference.
D. Multiple ad hoc conference can be added.
E. A range of directory numbers must be allocated for exclusive use by the conference.

Answer: C,E

Managers have asked to be able to have an extension call them back if it is busy when they try to call it. In what two places can this feature be assigned to the Managers phone? (Choose Two)

A. Device Setting > Device Defaults
B. Device Setting > Phone button Template
C. Device Setting > Firmware Load Information.
D. Device Setting > Default Device Profile Configuration.
E. Device Setting > Device Profile.
F. Device Setting > Softkey Template.

Answer: B,F

Which setting in Cisco Unified Communications Manager can IP Phone Services be configured for Enterprise subscription?

A. Device Defaults.
B. Enterprise Parameters.
C. Phone Services Configuration.
D. Common Phone Profile.
E. Service Parameters
F. Phone Configuration.

Answer: C

When a user dials a telephone number from a Type A SIP phone, how are the digits analyzed by Cisco Unified Communications Manager if no SIP dial rules are configured?

A. With a Type A SIP phone the digits are only sent en bloc.
B. If there are no dial rules present and the user uses the Dial softkey the digits are sent to the Cisco Unified Communications Manager digit-by-digit.
C. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager digit-by-digit.
D. When no dial rules are present, digits are sent to the Cisco Unified Communications Manager en bloc.

Answer: D

What is the output displayed on the IP phone when the incoming calling number is
00492288224002 and has a TON = unknown?

A. +492288224002
B. 00492288224002
C. 00491288224002
D. +49128822400
E. +49122288224002
F. 491288224002

Answer: B

What are two characteristics of a partition? (Choose two.)

A. Assigned to sources of call routing requests
B. Any group of numbers with the same reachability
C. Used in conjunction with calling search spaces to track calls to certain numbers
D. Used in conjunction with calling search spaces to restrict outgoing calls to certain numbers
E. Contains calling search spaces

Answer: B,D

Users that are subscribed to the default corporate directory are complaining that when they press
the Directories button, they receive an error message regarding the URL. Which two parameters need to be edited? (Choose two.)

A. Reset the Service Parameter > Phone URL Parameters.
B. Reset the Enterprise Phone URL Parameters.
C. Select the Service Parameter for the appropriate server and Cisco CallManager (active) and change the URLs for each service to match the DNS name or IP address of the server being configured.
D. Change the URL under URL Directories field under Enterprise Parameters to match the DNS name or the IP address being used by the server and reset the IP phones.
E. Verify that the corporate directory service has the Enabled check box checked in the IP Phone Services Configuration.
F. Verify that the corporate directory has the Enabled check box checked in the Enterprise
Parameter > Phone URL Parameters page.

Answer: D,E

Which three of these are enterprise parameters? (Choose three.)

A. phone URL parameters
B. codecs parameters for voice media-streaming applications
C. T302 parameter
D. User search limit
E. Enable Call Detail Records
F. Enable Dependency Records

Answer: A,D,F

What is required so that submitted Cisco Unified Communications Manager BAT jobs can be
executed properly?

A. Upload a CSV file.
B. Create a CSV file.
C. Submit the Unified Communications Manager BAT job for execution.
D. Activate the Bulk Provisioning Service on the first node in the cluster.
E. Download the Unified Communications Manager BAT template from Cisco Unified
Communications Manager.

Answer: D

@ahrrao
wer dis the new questions…??? is the answers correct…??? which dumps did u refer..??

Eb

The answers are correct, but you always need to cross check

– ahrao

wch dumps did u luk…??

pass with 895
this dump xenix is enough to pass + recent comments

hi guys this is my last paper of ccnp , i passed all others, but it has 226 question i am fed up please give some suggestion how i break the dump or any other dump with less questions. please advice i cannot complete 226 quesitons at a time. i want to breack it into two parts. but how to break VCE File

1.Which two of these are required in order for Cisco Unified Communications Manager to support software conferencing? (Choose two.)

a.The Cisco IP Voice Media Streaming Application needs to be activated on the server running the conferencing service in the cluster

b.The service parameter for the Cisco IP Voice Media Streaming Application needs to have Run Flag set to True.

c.The software conference bridge resource needs to be configured in Cisco Unified Communications Manager.

d.The Cisco IP Voice Media Streaming Application needs to be activated for all servers in the cluster.

e.Under the Cisco IP Voice Media Streaming Application parameters, the conference bridge needs to have Run Flag set to True.

ans: in xenix 219 its a and e,in 226 dumps its a and c. which one is correct…??

2.ABC Company has four locations total, all connected via an IP WAN. Each location has a Cisco Unified Communications Manager cluster,
and the headquarters cluster is connected to all other clusters via intercluster trunks. ABC wants to allow up to eight simultaneous
calls across the IP WAN. To call between sites, an employee dials a 2-digit access code plus a 4-digit extension.
If more than eight calls are made, or if the IP WAN is not available, calls should be sent to ABC Company’s preferred long-distance carrier.
If the trunk to the long-distance carrier is not available, the local provider should be used. The long-distance carrier requires 10 digits
to complete a long- distance call. The local provider requires 11 digits to complete a long-distance call but only 7 digits for local calls.

What is the minimum number of route lists required at the headquarters location?

a.1
b.2
c.3
d.4
e.5
ans: in xenix 219 its a,in 226 dumps its c.which one is correct…??

3. the 38th qstn in xenix 219 dumps answer is given as c,but the same question in 226 dumps answer is given as d.wch is corect…?? i cant copy the question here since it has an exhibit.
which one is correct…??

Which of the following Media resources can be configured on CUCM
a) MOH
b) Voice termination DSP
c) MTP
d) Transcoder
e) active attendent

Managers need a phone to call them back if it was busy when they called. Where is this activated?
b) Device settingn> Device profile
c) Device settingn> Device defaults
d) Device settingn> softkey template
e) Device settingn> phone button template

please answer for these questions.

Managers need a phone to call them back if it was busy when they called. Where is this activated?
b) Device settingn> Device profile
c) Device settingn> Device defaults
d) Device settingn> softkey template
e) Device settingn> phone button template

answer is d and some think from the other but certainly not e

@ehab…but its said to select 2 choices….!!!

hi guys very sad Failed today for 642-447, i have practiced on 219 questions, i failed just with 5 marks. All the quesitons that Ahro has given above was in the exam. I think lot of answers in dump 219 are wrong coz they are not matching with 226 dump. now next cahnce on sunday.

Guys AHRAO has given questions above all the in the exam but i guess some questions have wrong answers, coz dump 226 has different answers. eg

Managers have asked to be able to have an extension call them back if it is busy when they try to call it. In what two places can this feature be assigned to the Managers phone? (Choose Two)

A. Device Setting > Device Defaults
B. Device Setting > Phone button Template
C. Device Setting > Firmware Load Information.
D. Device Setting > Default Device Profile Configuration.
E. Device Setting > Device Profile.
F. Device Setting > Softkey Template.

Answer: B,F

the dump q226 answer is A and E which is correct and Ahrao has given wrong answer. this question was in my exam.

passed tday with 906 marks..!!!lukd xenix 219 and 226..!!! d qstns given by ahrao was der..!!! and if you prepare well with 219 nd the qstions given by ahrao u can pass 4 sure..!!! gud luck guyz..!!! god bless.!!! tanx 4 all ur support.!!!

Passed today with 895. Thanks to the dump q219, but take into account my recommendations. Cisco has changed questions regarding conferences, I mean those where you should choose one HW_CFB_1, SW_CFB_2 or something like this. So, before exam I strongly recommend being familiar with this topic. Also, I got several questions from q226 dump as well as almost all questions from the list that ahrao had published above. Therefore, if you want to pass this exam, you should be prepared to answer on those qs too.

Hi guys passes toay with 9xx marks used the 226 dump. Now i am CCNP, I have first completed all the othere papers and this 642-447 i did at the end.

As annonymous says see this link for confirmation of correct answer
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fscallbk.html

The Cisco IP Voice Media Streaming Application provides the following resources in software:

•Music on Hold (MoH)

•Annunciator

•Software conference bridge

•Media termination point (MTP)

When the Media Streaming Application is activated, one of each of the above resources is automatically configured. If the annunciator, software conference bridge, or MTP are not needed, Cisco recommends that you disable them by disabling the Run Flag service parameter for the Cisco IP Voice Media Streaming Application.

passed yesterday with 906 marks :),
xenix 219 z totally valid plus two questions from 226 file and above ahrao questions will make you pass the exam easily.
Best of luck to all of others.

I have passed the exam today with 83X and the 226q file still valid till today. just go through all the questions and you would find most of the q are repeated and this is good for memorizing the q and answers. of course go through this forum to get some incorrect answers from the file and correct it. I probably hit 9XX mark if i did go through all the 226q with complete study. as i remember i didnt get any new q all the q were from the 226q file but they twisted the scenario and answers..all the best to who is planning to take the exam…

Writing exam in a few hours. Thanks to everyone on this forum for their support and encouragment. Hopefully all will be ok. Study materials used were Ciscopress CIPT1, CBT Nuggets CCNA Voice, INE CCNP Voice Bootcamp, Voicetut, 219q and 226q and Google for research. What is the passing score required?

When you use Barge, other parties on the call hear a beep tone announcing your presence.
When you use cBarge, other parties on the call hear a tone and brief interruption in the call.

This question in 226q is wrong.
Verified using http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7905g_7912g/5_0/sccp/english/user/guide/512guide.pdf and

http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/user/guide/ipcughan.html

Passed 8xx. Hoped for more but a pass is a pass. Couple of questions I hadn’t seen before concerning presence but mostly everything came from the 226 and 219 dumps. 70 questions 90 minutes. Asmentioned on the forum by someone else a lot of the questions have been modified especially the HW_CFB type ones as this time it isnt so obvious which one to choose if you dont know ur stuff

Which two steps are required

Which two steps are required to configure LDAP authentication ?
A. Add a CUCM directory user and assign administrator access rights to the user in the LDAP directory
B. Activate Cisco Dir Sync service
C. Configure a synchronization schedule
D. Configure the LDAP server type in CUCM Administration
E. Configure LDAP server adresses in CUCM Administration

In AT 219q, answers are A,E
Think that correct answers are D,E

In the drag and drop question where you have to choose the commands for H323 GW configuration:
Under voice class h323 what command should we use?
h225 timeout tcp establish 3
h225 timeout setup 3

I configured several gateways as following :

voice service voip
(…)
h323
h225 timeout setup 3
h225 timeout ntf 5000
h225 display-ie ccm-compatible
call preserve
!
voice class h323 1
h225 timeout tcp establish 3
h225 timeout ntf 5000
h225 display-ie ccm-compatible
!

So, imo the answer is “h225 timeout tcp establish 3”.

I passed just now. Questions from Xenix and 6-10 new ones. Good luck guys!

Hi just passed yesterday. Used 226 and 219 I didn’t find new questions but found new choices to the questions in 226 and 219, so u gotta know your stuff. All the best

can you any one share latest dumbs for CCNP Voice (CIPT1) Thanks in advance

Anyone can help me to take CCNP Voice (CIPT1) exam, I have booked the exam day after tomorrow So please share any latest dumps…

Test 642-447 has 70Q 90mins, Passing score is 790. Dump 226 and 219 are still valid. I got like 4-5 new questions. Study all these questions from ahrao February 24th, 2012 post, because i got them all on the exam.

I am not sure the exact question but these are the new questions.

1. Refer to the exhibit. Which conference resource is conference 3 using assuming the MRGL has just been reset and all six conferences have become active?

A. HW_CFB_1
B. HW_CFB_2
C. SW_CFB_1
D. SW_CFB_2
E. SW CFB 3

2. Another question is about native Presence..
A. Subscribe CSS
B. Phone Device CSS
C. Phone Line CSS
D. Phone Device CSS and Phone Line CSS
E. Phone Line Device CSS, Phone Line CSS and Scubscribe CSS

3. Which three of These Media Resources Can Be based hardware?
a) MOH
b) Voice termination point DSP
c) auto attendent
d) Transcoder
e) Audio conference

I dont remember the rest but if you study the dumps you should be able to pass the exam. Good luck all.

Q: Which three determinations are possible when using Presence Feature in CUCM Network.

Dump Says: BCD
i think it should be ACD…
guys please help

i have exam today with 910 marks…. using 226Q dump.

there were 7 to 8 new questions. 3 of them i will say were not easy.

2 questions were same as in dump but there correct answers as per dump were not there in exam.

there are 2 to 3 questions in dump with incorrect answers.

please read dump very carefully..

Can anyone share your exam experience latest CIPT1 exam, bcz i would like to take the exam next couple of days, So please help me this. Thank you in advance……

Can anybody share me the book in pdf for exam preparation……………Thanks in Advance.

@SS: the ebook you need in here http://www.mediafire.com/view/?lx6cqeiagpjcbdh

Can anyone share your exam experience CIPT1 please help me on this, Thanks in advance……..

@linhdv: Thanks a Lot 🙂