Share your ICOMM Experience

Hi All

Any one know about how to get CUCM for practice at home and how can install it please share any thing you got with you as just reading dumps can’t give me hand on practice.

many thanks in advance

regard

fasial

faisal,

http://thepiratebay.org/torrent/4622879/Cisco_Unified_Communications_7.0.1.11000-2

Cisco Unified Communications 7.0.1.11000-2
original bootable DVD no additional licenses included
Can be used in VMware w/o restrictions but unsupported.

@ CUCM

Will wait for your response … please do post if you happen to get any additional questions .

best of luck in advance 🙂

PAV,

640-461 pdf book
http://wwwdot demonoid dot me/files/details/2745909/008682930369/

CBT Nuggets,

you can download 640-461 CBT nuggets from below links

http://www dot demonoid dot me/files/details/2770969/008682930369/

Hi All,

Just pass the exam today with 976/1000
yes, no doubt the dump still valid

http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce.file.html

There’re around 5 new question :
same as @kochi : I choose “The user is removed, but the DN and the Device remains in the system
”
same as @muhamed Ali : item 1, 2 & 5

thanks guys, step to cvoice …. 🙂

Please provide answers for following question s : New Questions:

1. Characterstic of voice? options: delay sensitivity, drop insensitivity, greedy .. , ……….., ………….
2. characterstic of data? sam options as above
3. exibit. users A rise ticket that he is unable to call B. where is the best to start trobul….
Ip Phone A, IP phone B, IP phone A user, voice gateway in site A…
4. whic command is used to find the layer 3 signalling is reached the PSTN Gateway?
options. sh isdn status, sh ccm-manager status, sh isdn XXXXX, sh isdn YYYYY
5. which allows call from sccp phones in cucm to call sip registerd phones in call manager express ….
options: sip trunk, h323 trunk, cisco unified border element…

Hello All,

Passed exam today with 975…. Extra questions that I remember.

1. IP phone A not able to call IP Phone B where you will start investigation.
2. IntServ Vs DiffServ (Different than what we have in dumps. Have some clear understanding on it before attend exam)
3. Use of CTI in CUPC… Ans: To control soft phone
4. Two DnD. Same that everyone aware of.
5. Characteristics of Voice
6. Characteristics of Video
7. How many unsuccessful login attempts to Unity Connection before locked out?
8. CUC valid transfer rules. Ans: standard, Closed. alternate
9. Is it possible to configure a call routing ( call forwarding ) on a unregistered phone to a other destination phone. Ans: Yes. CFUR (Call forward Un-registered option in CUCM).
10. What is the command use to reset IP phone .make shut down and bring it register back?

Dumps questions are valid but be careful with answers.

http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce.file.html (Section: A,C,D)

Recommendations:
Go through Cisco book and anyone of nuggets of 640-461 (INE or CBT Nuggets)

what happens when a user associated with a device is deleted?

1) The user is removed, but the DN and the Device remains in the system
2) The user is removed, and the DN and the Device also removed
3) The user is removed, and the DN and the Device become orphan in the system
4)The user is removed, and the DN and the Device are automatically assigned to other user
5)The user is removed, and the DN and the Device are assigned to the administrator

the right answer I think is 1) since the user will not affect the DN and Device and I have alreadt tested this.

other feedback !!

passed exam with 941

please read about IntServ Vs DiffServ.

Avi.173q.vce.file.html dump is valid.(Section: A,C,D)

@cucm

Thanks Bro

Hi,
I am looking for test abaout avaya (6002.1), is anybody hear about avaya 6002.1?

Jatoja

@ Jatoja…..this is a Cisco iComm(Call mgr related) forum. You will not find Avaya here.

Hi,
Passed today with 941. Study voicetut.com and http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce.file.html

thanks at all.

Congratulation Randall,

my exam will be held after tomorrow, could you help us more.

is there a lab question, and what is the new question ?

Thanks a lot

Passed today. 976/1000. Only 4-5 new questions, which are discussed in these comments.

@Bret hart HIt man
Voice : Smooth, Benign, Drop-sensitive, delay-sensitive, UDP priority
Data : Smooth or bursty, Benign or greedy, Drop-insensitive, delay-insensitive, TCP retransmits
Vidio : Bursty, greedy, drop & delay sensitive, UDP priority

@ Santai cuiii

Thank you 🙂

By the way Can you please tell me what is the passing marks in exam . really nervous . this time
planning to gv exam on friday … 🙂
Will post if i get any new question.

@ MOH

best of luck

Today is my exaaaaaaam !!

i will take the exam tomorrow. Thanks to all who shared their experience gave some hint to let other pass the exam…

cheers

Hello Boy,
where is the correct answer or this question ?

1. IP phone A not able to call IP Phone B where you will start investigation.
2. IntServ Vs DiffServ (Different than what we have in dumps. Have some clear understanding on it before attend exam)
3. Use of CTI in CUPC… Ans: To control soft phone
4. Two DnD. Same that everyone aware of.
5. Characteristics of Voice
6. Characteristics of Video
7. How many unsuccessful login attempts to Unity Connection before locked out?
8. CUC valid transfer rules. Ans: standard, Closed. alternate
9. Is it possible to configure a call routing ( call forwarding ) on a unregistered phone to a other destination phone. Ans: Yes. CFUR (Call forward Un-registered option in CUCM).
10. What is the command use to reset IP phone .make shut down and bring it register back?

1. Characterstic of voice? options: delay sensitivity, drop insensitivity, greedy .. , ……….., ………….
2. characterstic of data? sam options as above
3. exibit. users A rise ticket that he is unable to call B. where is the best to start trobul….
Ip Phone A, IP phone B, IP phone A user, voice gateway in site A…
4. whic command is used to find the layer 3 signalling is reached the PSTN Gateway?
options. sh isdn status, sh ccm-manager status, sh isdn XXXXX, sh isdn YYYYY
5. which allows call from sccp phones in cucm to call sip registerd phones in call manager express ….
options: sip trunk, h323 trunk, cisco unified border element

thank you

HI

Passed today with 965, valid exam 4 -5 new questions these are in this blog
GOOD LUCK!!!!!!!

Hello everybody.

@MOH
Good luck on your exam and could you share your experience ? 🙂
Is there lab ?
My exam will be friday.

Passed the exam with 965 score.

Cisco Testking 640-461 v2011-08-20 by Avi 173q.vce is valid.

5 to 6 new questions and mentioned above.

Thanks voicetut !!

Congratulations MOH.

Is there lab on exam ?

I’ve just took the exam earlier and by God’s grace I passed it.
As KRIS mentoned above:

http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce.file.html (Section: A,C,D)
This is still valid, however with regards to jhone connor concern, so far not included in my exam today.

Thanks to voicetut admin and to all.

For those who are planning to take the exam..God bless.

Going to have the exam today, Wish me luck, Gonna post if any new questions 🙂

Thanks God passed with 965/1000

Take care when u have questions about naming in Presense, i had two one for v7.0 and another for v8.0, there was another question regarding which options included in QoS report, most of the answers here or voicetut were (QoS + Directory), guess what the options doesn’t include directory !!!! i choose QoS and route groups ,,,most of the questions are from here and voicetut, Thanks everybody ALok, Avi, Voicetut, this dump is still valid,,,if i remember any questions i’ll post them, off to CCVP 🙂 😛

hello is this answer corrent

Where can admin start network services like Cisco TOM CAT IN CISCO UNITY CONNECTION?

answer is CISCO UNIFIED SERVICIBILITY

according to me it should be CISCO UNITY CONNECTON SERVICIBILITY

ISNT IT ,,, CORRCT ME IF I AM WRONG please

Thanks

Hello everybody.
CONGRATULATIONS @Mohammad H – My exam will be tomorrow.

@Bret hart
I checked in my CUC and the correct answer is Cisco Unified Serviceability.
To start, stop or restar, you need following this steps:
– Cisco Unified Serviceability (https:///ccmservice)
– Tools
– Control Center – Network Services

Good luck to LDS….as most will want to know, please post if test king is still valid and any questions you recall that are outside of those questions. I sit for my test next week!

Hello everybody Im from Peru I passed the exam 976/1000 same question http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce.file.html only section A,C and D.
Thks voicetut.

\m/ PASSED with 965/1000

Thanks to all who participated and paved each other,s success.
All question were discussed here in the forum and were from this dump . god bless all
and on my way to CVOICE 🙂
Merry Xmas .

http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce.file. == VALID

@ Thanks LDS for checking 🙂

@ Bret Hart and Satan….congrats! On a side note, in the dump Test D, ? 3, the ? is what 2 fields are in a QoS report: a) directory b) list c) QoS d) partition. What are the 2 correct answers or is this question even on the test? Thanks

Hello everybody.
I passed in exam today and TK Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce is valid.
My test had 70 questions and 5 or 6 new questions:
Question about LDAP and Cisco Unified Personal;
Question about Data characteristics;
Question about what button unregister the IP Phone ? (I put reset)
and others that I don’t remember.

Thanks voicetut and everybody.

Hello guys,
I passed exan today by the Grace of Allah Almighty with 965 Score Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce is valid.

1.there were some new questions describe calling search space.
2.user signing attemp in cisco unity connection.
3.LDAP integration.
4.drag & drop question H323,SIP,MGCP, SCCP

@Hook: QoS and Directory, Partition is 100% wrong

@Javeed Are there any labs in exam or just MCQ

jaivd please share

640-461.v2011-08-20.by.Avi.173q.vce

@ Hook

answer depends on ur choices …answer is partition and directory. are 2 fields in QOS reports

thats wat i marked in my exam .

@Hook

also read Mohammad H post at December 22nd, 2011
it depends on choices .. 🙂

I want get CCIP .Already passed BGP+MPLS and Routing .So what exam number of QOS I should pass to complete CCIP? 640-461 or 642-642?

Thanks..

Mohd,
Exam 642-642

jisbala, here is the link for 173Questions which is still valid.
http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce

scooter
There was no lab all were mcqs

Test tomorrow. I will post what I recall from the test.

Dump is still good, no new questions, no sim-labs. Min passing score was less than 800. Scored 900

passed today with 900+ score!!
dump valid, also read new questions posted here in the forum.

what I used to study:
Cisco Press
CBT Nuggets
Lab Setup
voicetut

Regarding the Tshoot question (user A can’t call user B, where to start troubleshooting) I believe the answer is IP phone A User. (first define problem/gather facts).

Now of to CCNP Voice, thank alot voicetut and all you guys!
Have a great new year and keep up the good work for other testtakers!

Hello,

I am planning on taking my test Monday but I am nervous about a few questions!
The dumps have different answers than Pass Guide does for the exact same questions.
Please help with the following:
Which Network component would cause variable network delay? Dumps shows Processing delay but the other stuff on the internet and in passguide shows propagation delay.

The other question is:
Which two options are features in Cisco Unified Presence? Dumps show IP Phone Messenger & Enterprise Instant Messaging.
Other material shows IP Phone Messenger and Native Presence

Please Help

2. IntServ Vs DiffServ (Different than what we have in dumps. Have some clear understanding on it before attend exam)

Integrated Services (IntServ): The IntServ model works through a method of
reservations. For example, if a user wanted to make an 80Kbps VoIP call over the data
network, the network designed purely to the IntServ model would reserve 80Kbps on
every network device between the two VoIP endpoints using the Resource Reservation
Protocol (RSVP). For the duration of the call, 80Kbps of bandwidth would not
be available for any other use other than the VoIP call. Although the IntServ model is
the only model that provides guaranteed bandwidth, it also has scalability issues. If
enough reservations are made, the network simply runs out of bandwidth.

Differentiated Services (DiffServ): The DiffServ model is the most popular and
flexible model to use for implementing QoS. In this model, you can configure every
device to respond with a variety of QoS methods based on different traffic classes.
You can specify what network traffic goes into each class and how each class is
treated. Unlike the IntServ model, the traffic is not absolutely guaranteed (since the
network devices do not completely reserve the bandwidth). However, DiffServ gets
so close to guaranteed bandwidth (some Cisco documentation refers to it as “almost
guaranteed” bandwidth), while at the same time addressing the scalability concerns
of IntServ, that it has become the standard QoS model used by most organizations

Hi,

I am planing to take CCNA Voice Exam 640-461

http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce

above dumps is still valied, please let me know someone please, Advance thanks

Can anyone please tell me where I can find cucm8.6 iso download free…. Its urgent!

thx..voicetut..passed exam today with 950+…

Passed with a 965 yesterday. The dump(only sections A,C,D) covers about 90-95% of the test questions. Regarding the IntServ/DiffServ question, know that IntServ is guaranteed and DiffServ is the preferred standard and offers scalability. The only other question I was completely unsure of was if LDAP integration was required for Personal Communicator. Thanks to Voicetut and everyone for their posts! Good luck!!!

I am going for 461 exam day after tomorrow. is there any lab in this suite as I didnt find any here with cbt nuget.

please anyone..reply.

thanks

@ Saif….no lab but know the diagrams and router screenshots from the Test King dump that is listed on this thread. There is the drag and drop ? from the dump…which lists the troubleshooting process steps.

hi, im planning for my exam in 3wks……how much of the CUCM do we need to know? like the what each button does etc? thing is that i dont have much experience with CUCM……any help will be appreciated

@Hook> thank you so much for you advice. Just came back from exam. the dump covered 60% of the answers and rest I had to go through by myself. Cant remember all new questions as i had’nt any chance to write them up. at lest passed with 900 lol.

good luck to all other student.

Hi Guys,

I think i will break my head for a small doubt… but this really bothers me..

I have 2 IP phones connected with PCs in its PC port. They are connected to a switch ports configured as voice and access.

I have 2 CMEs(2801) one acting as real CME and another only for DHCP purpose. DHCP pools are created for both VOICE and DATA networks.

Lets say VOICE VLAN is 10 and DATA VLAN is 20. The connection between switch and CME is IVR( i mean dividing the interface logically like fa0/0.10, fa0/0.20 …..).

If the connection between the switch and DHCP router is configured as a access line only fro VLAN 20(data network), it gives the ip for DHCP request of PCs.

To get IP for IP Phones, I have to configure a helper-IP in CME to forward the packets to DHCP router. Is this correct or am i imagining things?

Now comes the hard part of my doubt.

Can i configure the link between switch and DHCP router as trunk with IVR to get the IPs for IP Phones directly?

OR

Should i create seperate access link between switch and DHCP router for VLAN 10?

Will this work if i configure like above?

Plz help…

Hi Guys,

you can download CBT nuggets for 640-461 here

http://filespart.com/dl/bpx2lr.html

Just Passed CCNA Voice.
Tips of those studying for exam:
CBT Nuggets video series – Jeremy loves voice!
Cisco Press – Official Cert Guide – CCNA Voice (co-written by Jeremy)
and yes voicetut, great help, Thanks!
Again, learn the concepts and you will do great!

Which is the minimum score to pass the cert exam?

Passed the exam today.
The dumps and questions mentioned in previous comments is all that is required to get certified.

what two fields are contained in QoS report?
Answers with references please.

D&D regarding H.323, SIP, SCCP, MGCP

@ Ronald…..783 is minimum to pass.

hi everybody
how scoure i need to pass this exame ?
Do you study the form a, c and d enough to pass the exam?

Hi All,

What is the minimum passing score for this exam?

just sharing CBT nuggets torrent file

http://www.4shared.com/file/Gw_pT_BT/CBT_Nuggets_CCNA_Voice_ICOMM_6.html

Cheers!

Landi is the best in the world…..thanks landi for your help. LOL

Im using Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce

What exam do you used it to pass the exam, A, B or C?

Thanks a lot

Hi All,

Minimum passing score for CCNA Voice exam?

Thanks !!!

Hi all, greets from Mexico.

How are you studying for this exam??….

For example… I have already practiced with the CME and 2 softphones using a Virtual Machine. Then I have installed the CUCM 8.6 in a VM too…. However Im in a point where is not possible to install more VM in this case for the CUC and CUP…

I havent seen the vce exam, but does the exam include questions where you have to navigate in a web page similar to CUCM or just conecepts are necessary???

I´ll wait for your answer…

Thank you….

Hello Voicetuts,

Minimum passing score for CCNA Voice exam?
Thanks !!!

Thanks for sharing link of CBT nuggets for 640-461

http://filespart.com/dl/bpx2lr.html

hi all

which button in ccm case full software reboot of the IP phone?
a-CLI
b-SDM
c-reload
d-reboot
ans:????

Which two field are contained in Qos report?
a-Directory
b-Partition
c-Qos
d-List
ans:?????

pleas help me.

and are a ,c &d enough to study?

Hi,

Does anyone has CBT nuggets for CCNA voice exam?
Thanks for your help

In ICOMM v8.0 640-461 how many Labcim ques. available?

Please help…..

In ICOMM v8.0 640-461 how many Labcim ques. available?

Please help…..

ALHAMDOLLAH passed the exam

studied from a , c & d

some new questions but got through it

Minimum passing score for CCNA Voice exam is 783

no lab sim qus

nISHANTHA: No Lab qns.

BTW no questions from exam B?

There are no lab simulations on 640-461

Thanks guys….

Thanks guys…specially Will

Hello guys,

Please could anyone help with the correct answer to this question below, as we argue among options B, C or E. Thanks

Which network component will cause network delay?
A. Dejitter Buffer
B. Processing Delay
C. Propagation Delay
D. DSP Delay
E. Serialization Delay

@ Mimi ….. as per the dumps it should be B.

Does anyone have answers for these new questions ?

1. Characterstic of voice? options: delay sensitivity, drop insensitivity, greedy .. , ……….., ………….
2. characterstic of data? sam options as above
3. exibit. users A rise ticket that he is unable to call B. where is the best to start trobul….
Ip Phone A, IP phone B, IP phone A user, voice gateway in site A…
4. whic command is used to find the layer 3 signalling is reached the PSTN Gateway?
options. sh isdn status, sh ccm-manager status, sh isdn XXXXX, sh isdn YYYYY
5. which allows call from sccp phones in cucm to call sip registerd phones in call manager express ….
options: sip trunk, h323 trunk, cisco unified border element

Guys,

My Friend sent me these Q&Ans. >> Check it ………. Good Luck

3. exibit. users A rise ticket that he is unable to call B. where is the best to start trobuleshooting
Ip Phone A, IP phone B, IP phone A user, voice gateway in site A, call manager at site A

Ans: call manager at site A
4. whic command is used to find the layer 3 signalling is reached the PSTN Gateway?
options. sh isdn status, sh ccm-manager status, sh isdn XXXXX, sh isdn YYYYY

Ans: sh ccm-manager status

5. which allows call from sccp phones in cucm to call sip registerd phones in call manager express ….
options: sip trunk, h323 trunk, cisco unified border element…

Ans: cisco unified border element

6- Which of the following are the options when preparing Qos report in CAR(choose two)?

1)route list
2)hunt group/hunt list
3)gateway endpoints >>>>>>>>>> correct
4)IP Phones
5)….this i dont remember >>>>>>>>>>>>>

7- what is the configuration do you do to forwared acall that come to unregistered IP phone ?
-forwared all
-forwared unregistered
-CFUR. Call Forward unregistered >>>>>>>>>>>>>>>>>> correct
-:::::::::::::I can’t remember other choices
8- IP phone A in site A can’t make call to another IP phone B in site B ..what the firt step do you start with to solve this problem ?
the answer .i start with cucm in site A

9- Integration between CUPS and LDAP?
A. CUPS must be integrated with LDAP
B. LDAP is mandatory if CUPC is used
C. LDAP is optional, but user search will not be available >>>>>>>>>>> correct
D. LDAP is optional, but instant messaging will not be available

10. A Drag and Drop about H323, SIP, MGCP and SCCP.
H323 – standered
SIP – URL
MGCP – Edge device
SCCP – cisco proprietary

11. phone A is not communicating to phone B where will you start trouble shooting
Ans: from site A CUCM

12. CUC valid transfer rules (select three)
Ans: standard, holiday, alternate

13. 5Characteristics of voice and video (select four)
• delay sensitive
• Drop sensitive
• UDP Priority
• bursty and greedy

14. Characteristics of Data (select four)
• benign or greedy,
• drop-insensitive,
• delay insensitive
• involves Transmission Control Protocol (TCP)

15. How many unsuccessful login attempts to CCM before locked out?
Ans: 3

16.The file format used in Cisco unified to import users.
Ans: .csv

17. Which device between CME (with SIP IP Phones) and CUCM (with SCCP IP Phones)
A. Gateway
B. Gatekeeper
C. H323 trunk
D. SIP Trunk
E. Cisco Unified Border Element
Anser is option E.

18. Integration between CUPS and LDAP
A. CUPS must be integrated with LDAP
B. LDAP is mandatory if CUPC is used
C. LDAP is optional, but user search will not be available
D. LDAP is optional, but instant messaging will not be available
The correct aswer is the C .

@Mimi it is E answer

practice questions on
http://www.ciscovce.com

q 5/17 seems wrong:

In general, Unified CM and Unified CME interworking allows all combination of calls from SCCP IP phones to SIP IP phones, or vice versa, across a SIP trunk or H.323 trunk.

On a second thought it ask about “device” so the answer is correct http://www.networkworld.com/community/node/18048

I cleared the 460-641 this morning. 953/1000. About 10 new questions guys Characteristics of voice,Video and Data. I went through then yesterday night, google them it is not exactly in the book also a drag and drop about H323,SIP, MGCP and SCCP. The options are completely different from that in the avi Exam E, i went through each one and try to get it right, the options are not clear. I don’t know if i got it right through. Otherwise exam A,C,E still valid about 75 % are still in exam. Guys make it quick i think there will be lot of new questions in the coming days. Go through the vce and voicetut. Thanks again for everything guys without you guys i would have never make it. Keep it up. Hope to see a few of you guys CCNA Security.

Passed today, dump still valid.
Got one new question that nobody mentioned before:
Which command will briefly shut down the phone to apply changes to configuration?
a: drop
b: restart
c: reset
d: shut and no shut
d: shutdown
I choosed answer b because I saw word “briefly” and thought that its just reworded question about fastest method of ip phone restart. But my answer is most likely incorrect because restart does not shut down phone even briefly, it only reloads configuration. So the right answer I think should be c: reset.

me too i got this question and i chose reset

I think the correct is restart.The reason is the “briefly” keyword which I think is not mentioned in the question with no reason. A restart only reregisters the phone with Cisco CallManager, whereas a reset does a complete reinitialization of the phone. In the case of a reset, the phone fetches its configuration file again from the TFTP path, which does not happen if you restart the phone.In this case all it asks is to apply changes in config so I think a simple and fast restart is enough…

@ Vasyu restart is the quick action it just refreshes the ip phone in two seconds, but reset completely restartes the all settings of ip phone it takes 16 seconds shudown is and shut is no command there, so i think reset will be the best answer.

i mean the below link i have practiced, the whole form is i think talking about this:
http://www.examcollection.com/cisco/Cisco.Testking.640-461.v2011-08-20.by.Avi.173q.vce

@ Panos: Reset is the correct answer for the question and explanation is same as Aijaz Rehman has given; Reference CBT nuggets.

@ Aijaz Rehman: The one you mentioned (173 from that URL) is enough to pass the exam… all the best for you exam.

@Shanker Thanks very much; some people takes pain to answer for others. by the way i have one friend here in kuwait his name is shanker from baswada rajesthan. thnaks again. i am also going to CCNP Voice. I am CCNA only still but I am expert in Voice i am doing CCIE level work in my compnay, only the thing is i am not certified. hope fully i will do certificaton now.